Unable to Open File / File Error-Wrong Type / This is not a Movie File

I used TechTools to volume optimize my Lacie external hard drive. After the hard drive had been successfully completed - I am no longer able to open any of the files on the external hard drive. I get these error codes when I try to open FCP files, Quicktime FIles and word documents. Some how Tech Tools optimization has caused these files to be unreadable. Does anybody know how to fix this? There is NO backup for the Lacie hard drive.
HELP!!

You may be out of luck. My understanding is that there is no need to optimize mac drives in osx.
Digital Rebellion has a QT repair tool that's part of it's Pro Maintenance Tools
http://www.digitalrebellion.com/promaintenance/
There's a free trial and it's worth a shot.
If you want to send me a small file, I'll see if there's anything else obvious that I can suggest.
My email is [email protected]

Similar Messages

Mov-av error message. This is not a movie file.

Hello,
In capturing a live HD file from my AJA IOHD in PRO RES 422 the computer froze at the end of the capture and forced me to use Force Quit to close out of Final Cut 6. The file is 112 gig and all the information is there on my disk. But, when I try to open the quicktime file I get the dreaded "not a movie file" error message because it has the .mov-av extenson.
I imagine the header was corrupted and the directory needs to be rebuilt to get access to the file. Does anyone know how to do this? I would like to be able to open it without going to a very expensive data recovery service.
Any help would be greatly appreciated.
Thanks.
David Perry
Carmen Productions
Leesburg, VA

Hello,
Use free application Treasured to do a diagnostic and preview your damaged files.
http://aeroquartet.com/movierepair/download.html
Then follow the steps proposed by Treasured to request a repair.
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'
Regards, BJ

Quick Time Pro - The movie could not be open. This is not a movie file.

I upgraded to 7.4.5 and now I can't view any of my AVI files. I am getting the following error message.
The movie could not be open. This is not a movie file. Please help!

It is most likley a problem in the new Quick Time (QT). My Updater downloaded the new QT 7.4.5 two Saturdays ago. I have been making movies in iMovie then posting them to YouTube. In the beginning I uploaded the movies as MOVs but soon discovered AVI files (larger file and added time to upload) had more clarity when viewed on YouTube. Once the new QT 7.4.5 downloaded all my AVIs had picture, but no sound! I downloaded the Perian component as posted in QT discussions. The sound returned to the AVI files. However, when I Exported an AVI movie from iMovie the picture quality was worse than MOV. There is something wrong with the new QT 7.4.5 when working with AVI, my AVI movies look terrible. These AVI files were all downloaded from my Ultra Flip Video camera with Flip’s codec 3vix. Flip is aware of this problem and acknowledged it last week, I sure hope Apple is also aware.

Quick time 'this is not a movie file' error message

PLEASE HELP!
i've recently downloaded some movies off the internet (.avi files) and although all have originally opened and played in quicktime, i am now getting 'this is not a movie file' error messages for all of them. I've had this before and restarting the computer has usually helped - but not this time. I've also tried reinstalling quicktime, as well as installing divx (i get an error message saying this file cannot be opened). for some reason i can't install VLC (some message about not being able to mount).
I've also burnt the files to a cd and tried playing from there (Rather than my external hard drive) but still won't work. The files won't even open up a preview... i really don't understand what could have happened though - i've opened and played all of them when i first downloaded them and they worked just fine!
i'd appreciate any help.
cheers

The fact that you cannot even mount one file or install another makes it sound more like an OS problem than a QT problem, though I guess in part some people deserve what they get with pirated movies through torrents. Have you repaired permissions?
The files you cannot even use that are not the videos in question indicate your problems lie elsewhere.

When i share my movie to idvd it says there was an internal error in idvd this is not a movie...what is wrong? help!!

Please help, my idvd says there is an internal error when i try and make a movie, it was fine before!!

Hi
Very hard to say with so little info. Did You do any trouble-shooting ?
• Movie in iMovie has same fps (NTSC or PAL) as the iDVD project - must be
• Trashing iMovie and iDVD pref files so that new error free one is made on next start-up
• Run Repair Permissions (Disk Util tool)
• Run Repair Hard Disk (Disk Util tool - but now You must start Mac from DVD or external hard disk - can't do brain surgery on one self)
What material did You use
• Video Codec
• Photo format
• Audio file types
Yours Bengt W

"The movie could not be opened; this is not a movie file"

When transferring a video from my iPhone to my computer, it worked fine; however, when I actually tried to view the video on my computer it gave me the message in the title. It is marked in finder as a ".mov" quicktime file, and I am able to view the video on my phone. I see no reason for it not to function on my computer. Suggestions, or even a reason, would be greatly appreciated. Again, the video is fully viewable on the phone itself.

Did you try both QT 10 & v7.x?
To kill 2 cyber birds w/one cyber stone, make sure you have the following installed on your computer:
RealPlayer
Flip4Mac
VLC Media Player
Perian (AVI and FLV support)
Adobe Flash Player Software
*Repair permissions and restart your computer after the installations.*
!http://i50.tinypic.com/izvwo1.gif!

Receiving an export file error: wrong type

I have created a movie several times in FCP and then exported the movie to QT without any problems. Now all of a sudden, I can't get the movie to export correctly. After the 2 hour export, I'll check on FCP to find that the program has shut down without an "Unexpected Shut Down" message. I check for the exported movie which I find in the saved folder. I click to open and verify the completed job, but find that I get an error instead : "Error: Wrong Type".
The last successful movie I created was September 14th, prior to the QT 7.5.5 upgrade. I thought it was the upgrade, as I found out that FCP does not do well with the new QT version, so I reverted to QT 7.5, but I am still experiencing the same problem with FCP quitting and the movie not being able to read.
What is going on? Can anyone help?

Francois:
This is a crazy solution, but this happened to me last week and this solution enabled me to open my files again -- they were all greyed out and I thought I'd lost them. I took my drive in to an Apple Store Genius Bar without resolution and spend 2 hours online with ProApps (FCE/FCP) tech support, also with no resolution.
This fix is based on the fact that FCP when it is started, it automatically opens the project that was open when it was closed. First, in FCP save the current project (this can be any project -- I created a placeholder project -- to a dummy name -- I used "save me". Close FCP and delete the dummy name ("save me") project. Now rename the project that is greyed out and provides the File Error: Wrong Type message that you would like to open to the dummy name, so that it's now called "save me". Now open FCP again. Now save the recuperated file using the original name.
Maarten
Here's what you do.

QuickTime - "Not a movie file"

I hope this is the correct forum to post this question. So I had a TV station send me a drive with some footage on it. They're not on a Mac and couldn't export to ProRes, so I chose PhotoJPEG from their list of formate they could export. I've have good quality results with that format in the past and have exchanged that format with another shop that's running Avid and Fusion without any problems. Their file won't open at all, in anything. I'm running Snow Leopard 10.6.8 and was wondering if their file is too big for my system... 71 GB.
Instead of five or six clips, they sent me one mega clip. I can't imagine if the codec wasn't compatible, that I would get that error "This is not a movie file." Usuall would tell me I'm missing something or play the audio only. The file has a QT icon (maybe just because it has a .mov extenstion).
Any advice is greatly appreciated.

Thanks for the reply.
Ahh, I forgot to check that. It's a Windows NT File System (NTFS) format. What are the issues with grabbing a file from an NT formatted drive?

FCP Files Will Not Open (File Error: Wrong Type)

I have put together a few pieces using FCP and then unfortunately my LaCie HD got wiped. I was however able to recover all of my files (thank God) but when I go to open any previous FCP files, I get the error message "File Error: Wrong Type" once FCP is opened. I am wondering if there is any way to open these files somehow so I don't lose my work. Thank you.

If they'll open in QuickTime, you could re export them, and thus rebuild them that way.
Otherwise... recapture them. I'm not sure they couldn't be fixed, but more than likely the recovery process messed up the resource forks of these files. Might search in the QuickTime forum here for a fix for that??
Jerry

File Error: wrong type can't open media file

After capturing my film using Final Cut Pro,"Capture Now" I can't open the film file. It seems the film was caputured onto my Mac notebook in a file format Final Cut Pro doesn't recognize or can't open. When I try to open the file the following error message pops up: "File Error: Wrong Type".
It seems the format of this media file is AV or avi (the name of the media file is "Untitled - AV". It's not a .fcp file.
I tried to open it with Quicktime or other programs, but without success, no program can open it.
I appreciate your help!

I followed the instructions in the article AppleCare Technical Support emailed: http://docs.info.apple.com/article.html?artnum=302337 . It helped to delete the User Preferences and to remove receipts and to reinstall the entire Final Cut Pro Studio software. I think what really helped was to update the latest software versions (Final Cut Pro 5.1.4).
Thank you very much!
John Well-Off-Man

FCP File Error: Wrong Type

A EXT HD w/ 1TB worth of FCP Projects and it's media died on me. (no, none of it was backed up, please save me the lecture!)
Anyway, we sent it to one of the Drive Recovery places and they were able to retrieve about 95% of the files.
When I got back the new drive w/ the rescued files It seemed like it was all there until I tried to open one of the .fcp files and encountered this:
FCP File Error: Wrong Type
I checked the file's info to see if it was associated w/ FCP. It was...
I checked the Capture Scratch files and found that all of the Quicktimes did not have their ".mov" extensions. I added ".mov" after one of them and it opened successfully in the Quicktime Player. I tried moving this same file to FCP and encountered this:
File Error: Unknown File
As an experiment I took the same quicktime (which BTW is an HDV 1080i60 Quicktime) and dropped it into Compressor. I converted it to the same setting (HDV 1080i60) After the conversion I was able to pop it into FCP normally.
So what do you guys think? Is there anyway I can get these .fcp files to open? Am I totally screwed?
Thanks,
-B

Yes, a .fcp extension means it's a FCP project file. I'm not dragging/importing .fcp's into FCP, just trying to open them normally w/ no luck. It's the QT's I've been dragging/importing into FCP.
I've tried a few Resource Editors to change the way the .fcp project files are handled/read w/ no luck
Well, at least my QT's are intact...
-B

File Error: Wrong type

Hi,
I have been archiving some old finished videos (as self-contained QTs) on a server that is PC based. I have a feeling that this may be a problem. I'm right, right?
On a related note, I now have some QTs that will not open, with error messages like
'File Error: Wrong type.' (FCP)
and
'Error opening movie
The movie could not be opened.' (QT)
The fun part is that I cannot remember exactly which had been moved over there (I had a couple LaCies die on me and in a rush transfered a bunch of stuff back and forth trying to stay ahead of the crash), but now they're back on Mac based externals. But won't open.
Any advice is tremendously appreciated.
Thanks,
Ariel.
Dual 1.8 GHz PowerPC G5 Mac OS X (10.3.9) 1 LaCie Big Disk Extreme, 1 Maxtor 500Gb, FCPHD 4.5, QT Pro 7.1.3

Okay, thanks for the help. I'm pretty swamped right now, but by next Monday I will have gone through all of them. I will post back then with any info that may be of interest.
So, for the future, I should either stay away from non Mac OS formatted drives for my media, or zip them before sending them over. (by control clicking and archiving)
(sigh) Thanks, guys. I'm still just trying to figure out the cheapest, quickest way to archive my old stuff. I guess tape is the best way to go.
- Ariel.

File Error: Wrong Type with MPEG-4 Audio File

Help! I am trying to import an MPEG-4 Audio File into Final Cut Express2 but I keep getting a 'File Error: Wrong Type' message. Is there anything I can do to solve this problem. I really need this song for my video. PQu

iTunes - check your iTunes preferences:
Preferences > Importing -
- select Import Using AIFF encoding
- select Custom
- select Sample Rate 48.000 kHz
- select Sample Size 16 bit
- select Channels stereo
Then import your MP4 into iTunes
Then control-click on the track name in iTunes, select Show Song File, which will open a Finder window from which you can copy your AIFF file to any location you want it.

Message: File Error, wrong type

I have some folders listed on my scratch disc when I look in Finder. They say things like Waveform Cache file, autosave vault, audio render files. Inside there are files relating to a project I have completed. If I try to open them I get the message "File Error, wrong type".
It seems to me that it's OK to trash these as I cannot do anything with them. Before doing that I wanted to just check with the experts: is it OK to remove them please? Thanks for the advice.
Keith

If you're done with the project, it's ok to trash everything. If you plan to return to the project, you can delete everything except the actual project file and any media files associated with it.

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

Unable to Open File / File Error-Wrong Type / This is not a Movie File

Similar Messages

Maybe you are looking for