Unable to open files, all .nfo files

im unable to open files in the most folders, all files are .nfo

Assign those files to open with TextEdit.

Similar Messages

Error 'Unable to open file' when downloading SAP Query to Excel

Hi all
I'm running a SAP Query which is set to download straight to a spreadsheet (Pivot Table / Microsoft Excel). Intermittently it does not work - apparently at random (at least, I've can't recreate the error at will).
It does one of the following:
- Works ok, and creates the pivot table
- Gives an Excel error message 'Unable to open file', then returns to the 'save the data in a spreadsheet' popup when enter is pressed on the error.
- Does not issue error message, just goes to the 'save the data in a spreadsheet' popup.
In the last two cases, the excel pivot table sheet is not created.
Has anyone seen anything similar, or have any idea as to what is causing the problem?
Any help gratefully received!
Not urgent as I've found a way round - further testing seems to show that I don't get the error is Excel is already open - but in the past I've run many SAP query downloads without needing to open Excel first. I suppose it's possible that this is just something to do with the Excel setup at the user site
Message was edited by:
E Gregory

Hi,
Ensure that file name with same name and in same path should not be open while saving the data.
Award if it helps.
Jogdand M B

Unable To Open File.......... The system cannot find the file specified

hi all.
First time poster.
i have a windows VM running on my macbook...
have had no troubles for the last 2 months using hourly...
have just restarted the mac, and have come up with the unable to open file error...
i'm confused (extremely new to mac)
is there anything i need / can do to fix? (had a heap of stuff i needed on the windows VM)
thanks

Welcome to the Community,
I can't tell you what was causing this, but according to the support bundle you provided, three of the required .vmdk files are missing (Virtual Disk-s001.vmdk, Virtual Disk-s002.vmdk, and Virtual Disk-s003.vmdk). These files however still existed when you used the VM at "2015-05-23T12:29:04.017+10:00" (see vmware.log).
Since the VM is running on a snapshot and the base .vmdk files have a time stamp of April, 14th, you should be able to recover these three files from a recent backup (assuming you are regularly backing up your system). You may also want to check whether there's a lost+found folder on your system which contains the files!?
André

How to store SP2-0310: unable to open file errors in log file

We are using oracle 10g on Linux platform.
When we send scripts to the clients, then we also send a control file that executes all the sql files e.g.
control.sql
SPOOL test.log
SELECT 'Start of Control File at:'||systimestamp from dual;
SPOOL OFF
@./dbscripts/00_insert_scripts.sql
SPOOL test.log APPEND
SELECT 'End of Control File at:'||systimestamp from dual;
SPOOL OFFThe scripts are executed from SqlPlusW only by typing @control.sql
The problem is that when SP2-0310: unable to open file error comes, it appears on the screen only. It does not go in the test.log file. Is there any way to store these errors in a file from SQLPlusW.
Thanks.

try mentioning full path....
try
@<fully qualified path>/00_insert_scripts.sql
also check if the file has necessary permission
ls -l <fully qualified path>/00_insert_scripts.sql

Golden gate - Unable to open file (error 2, The system cannot find the file specified.)

Hi Everyone.
I have configured GoldenGate on Win2008 R2, but when I start replicat, this fall.
Initially:
GGSCI (WIN-NKC50KUIT0G) 19> start replicat rep1
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (WIN-NKC50KUIT0G) 20> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
REPLICAT    STOPPED     REP1        00:00:00      00:37:53
GGSCI (WIN-NKC50KUIT0G) 21> info replicat rep1
REPLICAT   REP1      Initialized   2013-11-02 22:23   Status STOPPED
Checkpoint Lag       00:00:00 (updated 00:40:28 ago)
Log Read Checkpoint File C:\app\Oracle\product\gg\dirdat\tr000000
                     2013-11-02 22:23:55.000000
With VIEW GGSEVT:
2013-11-02 23:15:31 INFO    OGG-01815 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: Virtual Memory Facilities for: COM
    anon alloc: MapViewOfFile anon free: UnmapViewOfFile
    file alloc: MapViewOfFile file free: UnmapViewOfFile
    target directories:
    C:\app\Oracle\product\gg\dirtmp.
2013-11-02 23:15:31 ERROR   OGG-00446 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: Extract file not found or no records beyond begin time.   why???
2013-11-02 23:15:31 ERROR   OGG-01668 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: PROCESS ABENDING.
After I tried with:
GGSCI (WIN-NKC50KUIT0G) 8>Alter rep1, EXTSEQNO 0
but
GGSCI (WIN-NKC50KUIT0G) 9> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
REPLICAT    ABENDED     REP1        00:00:00      01:11:50
why??? abended??
In logs:
2013-11-03 14:07:02 INFO    OGG-00996 Oracle GoldenGate Delivery for Oracle, REP1.prm: REPLICAT REP1 started.
2013-11-03 14:07:02 ERROR   OGG-01091 Oracle GoldenGate Delivery for Oracle, REP1.prm: Unable to open file ".\dirdat\tr000000" (error 2, The system cannot find the file specified.). why???
2013-11-03 14:07:02 ERROR   OGG-01668 Oracle GoldenGate Delivery for Oracle, REP1.prm: PROCESS ABENDING.
GGSCI (WIN-NKC50KUIT0G) 12> info rep1, detail
REPLICAT   REP1      Last Started 2013-11-03 14:30   Status ABENDED
Checkpoint Lag       00:00:00 (updated 01:19:03 ago)
Log Read Checkpoint File .\dirdat\tr000000
                     First Record
Extract Source                          Begin             End
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   2013-11-03 12:54
Current directory    C:\app\Oracle\product\gg
Report file          C:\app\Oracle\product\gg\dirrpt\REP1.rpt
Parameter file       C:\app\Oracle\product\gg\dirprm\REP1.prm
Checkpoint file      C:\app\Oracle\product\gg\dirchk\REP1.cpr
Checkpoint table     target.checkpoint
Process file         C:\app\Oracle\product\gg\dirpcs\REP1.pcr
Error log            C:\app\Oracle\product\gg\ggserr.log
GGSCI (WIN-NKC50KUIT0G) 13> view param rep1
REPLICAT rep1
ASSUMETARGETDEFS
USERID target, PASSWORD oracle
discardfile .\discard\rep1_discard.txt, append, megabytes 10
DDL
map source.*, target target.*;
I don´t understand it, How I could solve?? Please help me!
Thank you.

What steps did you use to add the Replicat? Can you list those commands out.
Also, does this file actually exist on the server where Replicat is running: C:\app\Oracle\product\gg\dirdat\tr000000

Unable to Open Files without Extensions

Ever since updating to Mavericks and iWork 2013, I've noticed that Pages seems unable to open files that lack formal file extensions and the OS seems unable to accurately identify what type of file something is. For example, if I double-click on a Word document that doesn't have ".doc" or ".docx" in its filename (either shown or hidden), Pages will launch and then say the file "can't be opened." If I then change the filename to include ".doc" or ".docx" and try again, Pages will open the file successfully. It doesn't seem limited to iWork, though. Today I tried opening a PDF file that lacked a file extension. Pages launched and told me the file "can't be opened." I then added ".pdf" to the filename, double-clicked on it again, and the file successfuly opened in Preview. Any idea why the OS seems to be unable to tell what kind of files things are all of a sudden? Or why iWork and other apps seem unable to recognize and open files they used to be able to recognize and open? I don't have time to add file extensions to all my files! — Also, I thought this was a mature UNIX-based OS, not Windows 3.1...

Didn't realize I could edit my original post, so now this comment is superfluous...

Content server - unable to open file

Hi,
For Linux based Content server 6.4 installation we are experiencing the errror as unable to open, display the saved DMS original fiiles.
The CS server URL test, RSCMST tests are all green.
The DMS authorizations are correct. We are able to save DMS files on content server. Only while in display mode CV03N it is showing error as unable to open file. We have checked DMS settings which are ok.
Request you to let us know where to trace the error.
Thanks.
Anirudh,

Hi,
The error is
Component New Microsoft Office Word Document 111.doc error text - No Such flie or directory
Repository Z_DMS_X cannot be addressed from the front end.
The CS is installed on Apache server, the users are on windows. The AdminSecurity is set to 0.
BR,
Anirudh,

Unable to open file D:/ucm/data/users/userdb.txt

Dear All
I have installed oracle UCM server on my windows server 2003 system and when i tried to log in throught http://localhost/idc I got this error:
Access denied to UCM Server managed resource. Error loading credentials from master cache. Unable to open file D:/ucm/data/users/userdb.txt.
I checked the path above and I didnt find the file userdb.txt, it might be something wrong in installation
Im just a beginner who doesnt have much knowladge in the field, I followed detailed steps I found on club-Oracle website ( http://www.club-oracle.com/forums/installing-stellent-or-oracle-universal-content-management-t170/)
I appreciate any help from you.
Regards

actually I was loging here to say that I found errors in the log file, the error seems to be related to DB connection problems, these are the errors in m,y log file:
ERROR:     Unable to create database connection for the database 'InstallerDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:home'. Please make sure that the connection string, user and password are correct.
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: localhost:1521:home
ERROR:     Unable to create database connection for the database 'InstallerDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:home'. Please make sure that the connection string, user and password are correct
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: localhost:1521:home
ERROR:     Unable to create database tables. You will have to create them manually
error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:home
WARNING:     Unable to publish user database.
WARNING:     Unable to register with Administration Server

Photoshop automate photomerge unable to open files

I am trying to use photoshop's automate photomerge function, but when I hit ok for the automatic photomerge, photoshop tells me it is unable to open file. I have tried opening the files separately and saving them as a different file type, no success. I have also tried reinstalling photoshop, just incase I may have accidentally deleted a plug-in, no success. This is the error message I get. It does this for all the image files I am trying to merge. Any assistance would be appreciated.

I am able to open the files in Photoshop outside of automate photomerge. I took a few screen shots of my desktop to test out the action, when I do this the images captured are originally .png files. Photoshop photomerge gave me the error message above when I tired using the screen shots. I then opened the files in Photoshop, saved them as .psd files and tried the automate photomerge action again. I received the other error message above. I tried restoring my preferences, but no success. Thank you for the suggestion, bummed it did not work.

Unable to open file "NULL\.EXT" - default sizes assumed for initial extents

Dear Friends i am trying to install IDES 4.6C on Windows 2000 Advance server + MSSQL2000 this error i am facing during installation all of the installation files are on my D:\ drive following is the structure.
D:\DBExport\DB
D:\DBExport\Data
D:\DBExport\LABEL.ASC
and kernal also on D:\ drive.
this is the error number one which i got
Error: DBR3LOADEXEC_NT_MSS R3loadPrepare 2 722
Child exited with error: rc = 2
child_pid = 1
See logfile SAPAPPL2.log for further information
and here is the associated log file.
#START OF LOG: 20060123112519
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log
start of syntax check ###
end of syntax check ###
#START: 20060123112520
error message: No such file or directory
(GOS) WARNING: Unable to open file "NULL\.EXT" - default sizes assumed for initial extents
(OLD) ERROR: CREATE statement failed for object "D010L"
     (CREATE TABLE "D010L" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"BLOCKNR" TINYINT NOT NULL , "BLOCKLG" DECIMAL(5,0) NOT NULL ,
"BLOCK" IMAGE NULL )
exec sp_bindefault 'str_default','D010L.PROG'
exec sp_bindefault 'str_default','D010L.R3STATE'
exec sp_bindefault 'str_default','D010L.R3MODE'
exec sp_bindefault 'str_default','D010L.R3VERSION'
exec sp_bindefault 'num_default','D010L.MACH'
exec sp_bindefault 'num_default','D010L.BLOCKNR'
exec sp_bindefault 'num_default','D010L.BLOCKLG'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010L' in the database.
#STOP: 20060123112520
#START OF LOG: 20060123152536
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log -r
start of syntax check ###
end of syntax check ###
trying to restart import ###
(RIM) INFO: table "D010L" dropped
restart finished ###
#START: 20060123152552
error message: No such file or directory
(GOS) WARNING: Unable to open file "NULL\.EXT" - default sizes assumed for initial extents
(IMP) TABLE: "D010L"
#Trying to create primary key "D010L~0"
(IMP) PRKEY: "D010L~0"
(OLD) ERROR: CREATE statement failed for object "D010LINF"
     (CREATE TABLE "D010LINF" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"R3RELEASE" VARCHAR(4) NOT NULL , "R3MODIFY" INT NOT NULL ,
"UNAM" VARCHAR(12) NOT NULL , "UDAT" VARCHAR(8) NOT NULL ,
"UTIME" VARCHAR(6) NOT NULL , "L_DATALG" INT NOT NULL ,
"Q_DATALG" INT NOT NULL , "Y_DATALG" INT NOT NULL , "SDAT" VARCHAR(8) NOT NULL ,
"STIME" VARCHAR(6) NOT NULL )
exec sp_bindefault 'str_default','D010LINF.PROG'
exec sp_bindefault 'str_default','D010LINF.R3STATE'
exec sp_bindefault 'str_default','D010LINF.R3MODE'
exec sp_bindefault 'str_default','D010LINF.R3VERSION'
exec sp_bindefault 'num_default','D010LINF.MACH'
exec sp_bindefault 'str_default','D010LINF.R3RELEASE'
exec sp_bindefault 'num_default','D010LINF.R3MODIFY'
exec sp_bindefault 'str_default','D010LINF.UNAM'
exec sp_bindefault 'str_default','D010LINF.UDAT'
exec sp_bindefault 'str_default','D010LINF.UTIME'
exec sp_bindefault 'num_default','D010LINF.L_DATALG'
exec sp_bindefault 'num_default','D010LINF.Q_DATALG'
exec sp_bindefault 'num_default','D010LINF.Y_DATALG'
exec sp_bindefault 'str_default','D010LINF.SDAT'
exec sp_bindefault 'str_default','D010LINF.STIME'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010LINF' in the database.
#STOP: 20060123152556
#START OF LOG: 20060123154952
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log -r
start of syntax check ###
end of syntax check ###
trying to restart import ###
(RIM) INFO: table "D010LINF" dropped
restart finished ###
#START: 20060123154955
(IMP) TABLE: "D010LINF"
#Trying to create primary key "D010LINF~0"
(IMP) PRKEY: "D010LINF~0"
(OLD) ERROR: CREATE statement failed for object "D010Q"
     (CREATE TABLE "D010Q" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"BLOCKNR" TINYINT NOT NULL , "BLOCKLG" DECIMAL(5,0) NOT NULL ,
"BLOCK" IMAGE NULL )
exec sp_bindefault 'str_default','D010Q.PROG'
exec sp_bindefault 'str_default','D010Q.R3STATE'
exec sp_bindefault 'str_default','D010Q.R3MODE'
exec sp_bindefault 'str_default','D010Q.R3VERSION'
exec sp_bindefault 'num_default','D010Q.MACH'
exec sp_bindefault 'num_default','D010Q.BLOCKNR'
exec sp_bindefault 'num_default','D010Q.BLOCKLG'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010Q' in the database.
#STOP: 20060123154956
#START OF LOG: 20060123162918
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log -r
start of syntax check ###
end of syntax check ###
trying to restart import ###
(RIM) INFO: table "D010Q" dropped
restart finished ###
#START: 20060123162920
(IMP) TABLE: "D010Q"
#Trying to create primary key "D010Q~0"
(IMP) PRKEY: "D010Q~0"
(IMP) ERROR: CREATE statement failed for object "D010Y"
     (CREATE TABLE "D010Y" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"BLOCKNR" TINYINT NOT NULL , "BLOCKLG" DECIMAL(5,0) NOT NULL ,
"BLOCK" IMAGE NULL )
exec sp_bindefault 'str_default','D010Y.PROG'
exec sp_bindefault 'str_default','D010Y.R3STATE'
exec sp_bindefault 'str_default','D010Y.R3MODE'
exec sp_bindefault 'str_default','D010Y.R3VERSION'
exec sp_bindefault 'num_default','D010Y.MACH'
exec sp_bindefault 'num_default','D010Y.BLOCKNR'
exec sp_bindefault 'num_default','D010Y.BLOCKLG'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010Y' in the database.
#STOP: 20060123162921
I am really struck with the installation any help will be highly appreciated.
best regards,
Zeeshan

Hi:
It seemed to me that you put the wrong directory or drive when started the installation. It shows "error message: No such file or directory" when trying to locate the files.
You can try to verify your inputs during first phase of the installation.
Hope this helps!
Best Regards,
Federico G. Babelis
NetWeaver Certified Consultant
http://www.gazum.com

PLEASE HELP! Unable to render any Quicktime format - after effects error unable to open file (-1610153459)

I just can't render any type of Quicktime file in AE CC 2014. I'm on Windows 8.1.
Even in CS6 was it not possible, but I never really used any Quicktime filetypes.
Normally I just rendered to .h264, but now that's only available via the insane slow Adobe Media Encoder, I want to use the Quicktime -> h.264 option, but it's just not possible.
I also want to render some footage to the Avid DNxHD codec, but this is also not possible.
Doesn't matter what type of footage, dslr footage, pictures, AE solids. Everytime I want to render in a Quicktime file I get this error:
AE error: Rendering error while writing to file (File-Location). Unable to open file. (-1610153459)
Installed the latest Windows version of Quicktime, didn't help...
I saw some topics about this, but they didn't provide a good solution. All they discussed was the hardware of the computer. I have enough space available and render to a NTFS drive.
Please can someone help me with this!

Yes! I just solved my own problem. I still think that the internet doesn't provide an easy to find answer, so I will post this.
I had the latest version of Quicktime, but this version causes the problem. After some searching I finally found a page on the Apple website that confirms this.
Updating to QuickTime 7.4 may cause issues while rendering footage in Adobe After Effects - Apple Support
So I uninstalled my latest version of Quicktime and installed version 7.4.1. Everything works now the way it's supposed to!

Nokia Lifeblog - Unable to open file error

Hi all
Im using Nokia lifeblog on my Nokia N70. While it works fine, I have a lot of text and pic message entries in my lifeblog view which when i try to open give a message sayin "unable to open file, delete item??
I was wondering why this happens.
Any help would be much appreciated.
Thanks

For the benefit of anyone who experiences this error in IIS7, the IUSR_xxx user no longer exists. You must grant permissions to "IIS APPPOOL\hfmAppPool" instead (select the local machine as the "Location" if Windows Explorer complains).
Similarly, for the benefit of those who get the error in HFM 11.1.2.1, security must be applied to the Oracle\Middleware\user_projects\product\FinancialManagement\Web folder.

Bug in file opening "SP2-0310: Unable to open file." How to register it ? ( Version 4.1.0.18)

Steps to repeat in version 4.1.0.18
1) mkdir sql
2) cd sql
3) touch script2.sql
4) touch script1.sql and write @@script2.sql
5) open the script1.sql from "Files" tree in sqldeveloper, choice connect to any oracle db , run script(F5)
Error starting at line : 1 in command -
@@script2.sql
Error report -
SP2-0310: Unable to open file: "script2.sql"
If try to execute this case in version 4.0.3.16 then all work will be fine.
How to register it ?
Message was edited by: DmitryZaytsev

Hi!
The SP2-0310 error occurs when you have not fully-qualified the PATH to the file. Rather than rely on a variable, specify the fully-qualified path.
HTH!

Error reading backup piece, unable to open file,

I have 3 bkp file in BACKSET directory, I am trying to duplicate form one system(Windows XP) to another Windows XP.
I get errors as below. Please help.
channel ORA_AUX_DISK_1: reading from backup piece Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP
ORA-19870: error reading backup piece Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP
ORA-19505: failed to identify file "Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP"
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
The file Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP does exist in the target database.
Edited by: user10404616 on Mar 31, 2010 7:51 AM

You must copy the backup pieces from SysA to SysB -- to the expected location. This would be the same directory path as on SysA.
See the documentation on the DUPLICATE DATABASE command :
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta028.htm#RCMRF126
If the target and duplicate databases reside on different hosts, then you must do one of the following tasks for duplication to be successful:
Move backups and disk copies from the target host to the duplicate host to the same location as the target host so that the path names are identical
Move backups and disk copies from the target host to the duplicate host to a new location (so that the path names are different), and then CATALOG them.
Make sure that all backups and copies (disk or sbt) on the target host are remotely accessible from the duplicate host. Make sure that the archived redo logs are available in the expected location in the new host.
Hemant K Chitale
http://hemantoracledba.blogspot.com

MP4, unable to open file.

Hi all,
I have just received an MP4 file video. However when I click to play it I get the message "unable to open file".
The phone does know it's an MP3 file format & an Icon of a film or movie reel is displayed, but cannot play it. Could it be corrupted. The box for the 6300 says it can play MP3 & MP4 & other file formats too.
Cheers....Brim

It's not strange.
these are strange times my friend...
Different models have different video capabilities.
Click on the Nokia Feature Video table link here:
http://nokiavideo.blogspot.com/2008/03/how-to-become-better-video-editor_11.html
640K Should be enough for everybody
El_Loco Nokia Video Blog

Unable to open files, all .nfo files

Similar Messages

Maybe you are looking for