Unable To Open Financial Reporting Reports In PDF In EPM Workspace in 11.1.2.2

Hi All,
We have FR 11.1.2.2 running on AIX and we recently apply a patch 11.1.2.2.303 to this FR 11.1.2.2. As a pre-req we have also apply the patches for HSS and workspace. Now after applying the patch we cannot open the reports in PDF mode in workspace however we can open the reports in HTML mode.
Can anyone help on this!!!
Thanks,

Hi,
Create a folder named Temp in the root of C: (to match the xdo.cfg file).
- OR -
Edit the path reference in the xdo.cfg file with a valid directory.
- OR -
Remove the applicable line entry from xdo.cfg file:
1. Navigate to the applicable path (the default is Oracle\Middleware\EPMSystem11R1\products\financialreporting\lib\FOProcessor).
2. Open the xdo.cfg file in a text editor.
3. Remove the following line then save the file:
<property name="system-temp-dir">c:\temp</property>
4. Execute the FR reports in workspace with PDF preview to validate the results.
Note: Save a backup copy of xdo.cfg before modifying it.
regards,
Harish

Similar Messages

Unable To Open Saved WI Reports in IE 9-Receive Invalid Path Error

I am unable to open any saved web intelligence report documents in Internet Explorer 9. When I select view or modify, the java report panel does not initiate but instead gives me an error stating "Invalid path /AnalyticalReporting/WebiView was requested". Everything works fine if I use Firefox 9. Is it a setting I need to change in internet explorer somewhere or is it a compaitibility issue?
I can create new web intelligence queries and reports in IE 9, but if I try to open a report that I saved, I get an error.

Hello,
If you are using the older version of BOXI in that case IE 9 is not supported. Please check your Boxi version which supports IE 9 or not.
Thanks,
Rcse2006

Unable to open web analysis reports through workspace

Hi,
I am connecting web analysis with MSSQL server 2000 and generating reports. I am using essbase 9.3.1 version.
But my problem now is that I can just open these reports from web analysis studio and cannot open them from workspace. In workspace, if I right click on the report and open it from web analysis studio it does open. But it does not open by double clicking the report in workspace. It just shows a blank report on just parts of the report.
The issue is only there for the reports that are getting data from relational db (MSSQL server 2000). The other reports that are using the cube data are fine and opening from everywhere.
Are there any other configuration settings involved in order to open a web analysis report(that uses relational db) from workspace?
Thanks in advance,
John

Hi Atul,
Try using the in built config checker:
http://localhost:16000/WebAnalysis/config
This has several tests you can perform to see what's running.

Unable to open FR Studio Reports in PDF

HI
When i select the Preview option "Open in PDF" in workspace v 11.1.2.0, the report disappear with an error "The page can not be displayed". Can anyone guide me on this issue........

To view in PDF format Ghostscript is required. Check this link it might be helpful:-
http://download.oracle.com/docs/cd/E17236_01/epm.1112/fr_webuser/frameset.htm?launch.html
Let me know about it.
Cheers
Vikas Naidu

Unable to open Project management reports

Hi,
I tried to access Reports under Project management, I can see some list of reports but whenever i click any report i get this message " Do you want to save this file or find a program online to open it , Name : BExab6f08f3 , type : unknown , from: xxxxxx " . I get this whenever i try to access any reports in project management.
I had checked few things from my side, /BCV/Main is activated, I have BCV_admin role and also CPR_BCV_USER role, but still i am not able to view a single report. I tried accessing from NWBC desktop GUI and web gui, same error. Please guide me in solving this problem.

Hi,
I just have some clarifications, is it necessary to have BI system to access the Reports under Project management / portfolio management?, Or can it be accessed without any BI system?. I found that whenever I run any report under Reports section it tries to execute the RFC SAP_BW, but in my system there is no data available in that RFC, since we dont have BI.please let me know about this.

Unable to open the detail report in the same page/window

When i use the "Navigate to Web Page" action link to navigate to the detail report, the detail report is opening in new window. Is there any way that the detail report can be opened in the same page/window.

Hi,
why don't you use the master/detail table option when dragging the master VO ?
Frank

I am unable ro run 7.x reporting in my system?

hi friends,
how are you, i am unable to open 7.x reporting in my system , any system specificatiosn need. ple help me regarding this.,
regards
suneel.

You can upgrade to either '09 or '11 from a purchased iLife DVD
You will not lose your projects - unless something goes wrong which is why you must always have a good current backup since things sometimes do go wrong - and you expecially must have a backjup when doing any update or upgrade
some projects may change from version to version so after upgrading (and anytime you order)
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
Bottom line is that your projects can not be ordered from Apple unless you upgrade - there are people (I have no personal knoledge of how they do) who claim to be able to print from the preview PDF - for example http://www.prestophoto.com/help/Apple+iPhoto+Book+Printing - from a google search
LN

I downloaded Adobe Reader now I am unable to open certain pdf files

I downloaded Adobe Reader and now I am unable to open the majority of the pdf. files from the internet. Has this happened to anyone else and if so how did you resolve the issue?

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Unable to open PDF output (PDF downloaded from Interactive Report--APEX)

Hi,
I'm getting below error while opening a PDF file downloaded from an interactive report (APEX).
Adobe reader cound not open "TEST.pdf"because it is either not supportd file or because the file has been damaged.
Thanks & Regards,
Ramamuni.

Steps of pdf Printing of Report from FOP:
1) Download and unzip the following needed files in D:\Apex_fop directory.
2) Open your command prompt .
Change the directory to D:\Apex_fop\cocoon-2.1.11.
Set the Java_Home environment variable as: set JAVA_HOME= C:\Program Files\Java\jdk1.5.0_21
then type build war
3) After getting the prompt back as D:>Apex_fop>cocoon-2.1.11>
Copy coocon.war file from the folder D:\Apex_fop\cocoon-2.1.11\build\cocoon.
Paste this file into webapps subdirectory in main tomcat directory having path as D:\APEX_FOP\apache-tomcat-6.0.26\webapps.....place it in the top
level of webapps directory.
4) Now just startup tomcat as D:>APEX_FOP>apache-tomcat-6.0.26>bin>startup.bat
The cocoon.war file will automatically uncompressed as directory.
5) To change the port of apache tomcat , edit apache-tomcat-6.0.26\conf\server.xml & change port attribute of Connector element from 8080 to 8181.
Just check whether Tomcat is running or not as http://localhost:8181/
& to check cocoon type http://localhost:8181/cocoon/
6) Now copy fop_post directory & paste it undes new cocoon directory in webapps having path as D:\APEX_FOP\apache-tomcat-6.0.26\webapps
\cocoon.
7) Now you need to do some apex settings as follows:
In APEX, just log in as ADMIN into apex/apex_admin and went to Instance Settings and did the following:
- Print Serverr: Standard Support
- Print Server Protocol: HTTP
- Print Server Host Address:localhost
- Print Server Port: 8181
- Print Server Script: /cocoon/fop_post
In your APEX application, in the Regions section, Click on the Print link next to your report and do the following settings:
- Enable Report Printing: Yes
- Link Label: Print
- Response Header: Report Settings
- View File As: Attachment
- Output Format: PDF
- Report Layout: Default Report Layout
- Print URL: f?p=&APP_ID.:1:&SESSION.:FLOW_XMLP_OUTPUT_R1063230002781575
8) Open up the Report Page and click Print , You will get the pdf report.
I am sure this will help you
Regards

HTTP Status 500 message when attempting to open Financial Report.

In a new 9.3.1 installation (BI, Essbase, HFM, Planning) I am unable to run Financial Reports in Workspace. As a test, I have created a simple report, using Studio, which has only boilerplate text - no grids or anything else that requires a DB connection. The report previews fine from the Studio client but when I attempt an HTML preview or when I attempt to run the report from within Workspace, I receive an HTTP Status 500 error in the right panel in Workspace. Below is the text of the error. I am using IIS 6 with Tomcat. My troubleshooting effort have been around IIS and BI configuration. I am able to open Web Analysis documents without any trouble. Any suggestions you may have would be appreciated.
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:97)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:346)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:414)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
root cause
Compile failed; see the compiler error output for details.
     org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:944)
     org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:764)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
note The full stack trace of the root cause is available in the Apache Tomcat/5.0.28 logs.
I have re-registed with HSS repeatedly as well as scrubbed the logs.

Hi again Ramana,
Did you try any of the following:
1.) Delete Tomcat cache with the following steps
Stop Tomcat.
Remove the folders from <Tomcat\work\Catalina\localhost> directory.
Start Tomcat. (it will delay a few minutes)
The cache will be recreated automatically.
2.) Redeploy Explorer application with wdeploy tool (Location: <install_dir>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\wdeploy)
Syntax
wdeploy <WEB_APP_SERVER> [-D<PROPERTY>=<value>] <ACTION>
Example
-- Undeploy
wdeploy tomcat7 -DAPP=explorer undeploy
-- Deploy
wdeploy tomcat7 -DAPP=explorer deploy
Regards,
Ilias

PDF preview in workspace not working for Financial Reporting

I have an issue in workspace with doinga PDF preview on a Financial Reporting report. PDF preview works fine via workspace but only FR has the problem, here is the error that is displayed. I am running FR server on AIX and the print servers are on windows platform. We have two installations pointing to same windows box for print server. The 1st if FR for HFM running all on windows, the 2nd is FR on AIX for an Essbase installation. The HFM FR install works great via workspace but the the 2nd produces the following error:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
We made the port for the print server static(it is normally dynamic) so we could open the firewall port to the print server and have verifed it is open.
Does anyone have a suggestion of what could be producing the Internal Server Error. I should mention that we use Weblogic for the web deployment of workspace if that should have any bearing on the issue.

Firewall issues were preventing this problem.

Open doc URL: unable to open the report in same window

Hi
I'm trying to open a report using open doc url with "swindow=same" but still it opens in a separate window. This happens only when I use JAVA viewer. it works fine in ActiveX and HTML but I want this in JAVA viewer as i'm including this page in my JAVA application and it should open the report in the same window. I tried using "<a>URL</a>" and also target="_self" by HTML interpretation for that object but still the same problem. I'm unable to open the report in the same window by using JAVA viewer for Crystal Reports in info view. Please help me!!!
Envirorment Details: Crystal Reports 2008 SP3, BOE XI R3 SP3
regards
Raghavendra.G

I have tested that myself and It seems that HTML interpretation does not work with the Java viewer.
I have also tried using a hyperlink containing javascript
eg.
javascript:window.location.href='http://www.sap.com'
but the java viewer seems always to launch a new window before processing the command.
I would recommend to open a case by SAP support ( httP://service.sap.com/support )
Regards,
Stratos

Open a PDF report from a PDF report

I would like to open a PDF report from a PDF report, but in a new IE window.
I have the following code attached to an item in the report:-
function F_RECONFormatTrigger return boolean is
begin
IF trim(:btch_ref) = 'PL' and trim(:recon) is not null and trim(:recon) <> ' ' then
srw.set_font_weight(srw.bold_weight);
srw.set_font_style(srw.underline_style);
srw.set_text_color('blue');
srw.set_hyperlink_attrs('onMouseover "window.status="Click here to see what is in your shopping basket"; return true"'||'onMouseout ="window.status=" "; return true"');
srw.set_hyperlink('/reports/rwservlet?cmdkey=famis+desformat=pdf+report=FAMREP011+p_orderno='||trim(:recon));
srw.set_hyperlink_attrs('target=_blank');
-- srw.set_hyperlink_attrs('target="_blank"');
END IF;
return (TRUE);
end;
All of the commands work except for the 2 srw.set_hyperlink_attrs commands. The "onMouseover" and the "target" seem to have no effect. Can anyone help?
Thanks in advance
Michael

The built in srw.set_hyperlink_attrs does not work , if the report format is PDF. There is no way to open another PDF report from a PDF report in a seperate window. Also think there is no way to hide URL which apperars when the mouse pointer moves over the hyperlink.
In other report formats like HTML, the built in srw.set_hyperlink_attrs works.
Kranthi

Unable to open reports with Web intelligence

Hi there,
We are unable to open reports using Webi Intelligence. Error of "Session is closed(Error: INF)" apears.
I have restarted the SIA and Apache services with no luck.
Version : Business Objects XI3, Edge Series professional
Kind regards,

Try changing the idle connection timeout on your Web Intelligence Processing Server to 60 minutes (from the CMC).
If this doesn't work, please add a trace to the Web Intelligence Processing Server (add a -trace to the command line parameters of the server). and post the log for the relevant time period.

Unable to open reports in web browser through 9ias

Hi ...
I got the following error when i am clling from web.
I saved my reports into database from .rdf format.
Error: The requested URL was not found, or cannot be served at
this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-0110: Unable to open file 'STATION'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'STATION'.
I wouid appreciate any help
Regards
Gopi

Hi,
Just check I think users are executing reports first time, Go to Start Menu of Windows -> All Programs -> Business Explorer -> Analyser.
Then a pop windows will come which will ask for enabling Macros in Excel.
Check the Authorization Role for User in TCode PFCG, Check the Sub option for S_RS_COMP & S_RS_COMP1.
Regards,
Rajdeep.

Unable To Open Financial Reporting Reports In PDF In EPM Workspace in 11.1.2.2

Similar Messages

Maybe you are looking for