Unable to Open/Import Multiple Files in Audtion 3 - Old Bug?

As stupid as it might sound I can't seem to open more then single files from the Files Window in Audition 3.0.1. You can select them (shift+click or right click) but they don't open. However if you drop them from explorer or "open file with" they do open but then the next issue emerges.... They are not saved in the session file UNLESS you use them in the Multitrack View!! Now is this me or is it an old bug or something? (I've recently updated from Audition 1.5).
The files I've tried are mainly wav-files and mp3. Same result though.

Ooo? So UNSED files are NOT reloaded in the session file! Well, thanks for
clearing that up (Still, I must say it makes it a bit frustrating though!).
My impression was that, as I used Audition 1.5 before, I was quit sure it
was possible there! But then again it's been a while since I used that
program too in a major scale. (I've been working in much After Effects
lately, wich of course has another handling of files).
As for the Files (Edit) View, I still can not open more than ONE file at the
time from that location - regardles of Multitrack or Edit View, really!
ShiftClick, CtrlClick, Right Click - you name it. Yes, select them but
open? No can do!! Now, as I mentioned before there is the workaround when I
select the files in explorer (Windows) and then drops them in Auditions
File View - they all then load accordingly (Or you can aslo use "open file
with" then point to Audition). Otherwise, once the files are imported,
there's no problem working with them in Multitrack/Edit and do all the rest.
Yet, it is a bit absured though and hard to tell whether it's a bug or not
(?). Virus?
Anyway, thanks a bunch!
Daniel
2009/5/19 Eric Snodgrass <[email protected]>
I'm not sure I'm understanding your problem with the Files window. To try
this, I opened eight files in the Files window in Edit View. From there I
could drag any one of them into the Edit window with no problems. I also
was able to drag them into different tracks in Multi Track View. I also put
files into the Files window, CTRL+clicked all of them and dragged all of
them at once into the Multi Track View successfully. I repeated this doing
SHIFT+click. I then put into the Files window tracks that have different
sample rates. They all went into the Multi Track without incident (after
the program resampled the unmatching tracks to conform to the session's
sample rate).
>
Yes, you are correct that the files not used in the session are not
reloaded into the Files window when the session is reopened.
>

Similar Messages

REP-0004: Warning: Unable to open user preference file.

Hi,
I am creating an invoice header in Payable through open interface in r12. I have inserted one line in ap_invoices_interface table.
When I run Payables Open Interface Import request, it completes normal but invoice does not create.
Please see below log file and provide your guidence.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXIIMPT module: Payables Open Interface Import
+---------------------------------------------------------------------------+
Current system time is 24-DEC-2013 12:39:46
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_source='MANUAL INVOICE ENTRY'
p_batch_name='test4'
p_purge_flag='N'
p_trace_switch='N'
p_debug_switch='N'
p_summary_flag='N'
p_commit_batch_size='1000'
p_user_id='19334'
p_login_id='2499994'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00000: 0 invoice(s) were created during the process run
MSG-00000: 0 invoice(s) were fetched during the process run
MSG-00000: summarize flagN
MSG-00883: After Repport Trigger: Setting the Org Context to Multiple
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 24 12:39:47 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Regards
Farooq

Please also see if the following docs help.
R12: Master Troubleshooting Guide for Supplier Contacts Open Interface Import Report (APXSCIMP) [Video] (Doc ID 1373699.1)
R12: REP-0004 Error While Running Supplier Contacts Open Interface Import Program (APXSCIMP) (Doc ID 1195815.1)
R12: APXSUIMP Ends With REP-0004 Error, But Output Does Not Display Reason for Rejection (Doc ID 1060824.1)
Thanks,
Hussein

InDesign CS3 crashes when importing multiple files.

I've got a new box that's been running pretty solid for several weeks now. It's Win 7 with 8 gigs. Just last night it starts crashing when I'm importing multiple files. Doesn't matter if it's JPGs, TIFFs, or PDFs.
I can import all the same files one by one using the place command.
Importing multiples using the place command or dragging & dropping crashes.
It's not a case of placing a PDF using the bleed box and no bleed box is set. And that usually doesn't crash InDesign, just fails to import.
I deleted the preferences file to no avail.
CS 5.5 has no problems. No, I can't just use 5.5. I'm the only person with it and really only use it for converting files for customers that don't have the common sense to send a PDF. Other people in the shop have to be able to open these same files.
Any ideas? This is already a pain since one of my main jobs is ganging business cards 72 up on a sheet.
Thanks,
Mike

Only difference between with and without the plugin is the Faulting process id, Faulting application start time, and Report Id...
Faulting application name: InDesign.exe, version: 5.0.0.458, time stamp: 0x45f900b6
Faulting module name: APPFRAMEWORK.RPLN, version: 5.0.0.458, time stamp: 0x45f903d0
Exception code: 0xc0000005
Fault offset: 0x0001b8b0
Faulting process id: 0x2ac
Faulting application start time: 0x01cd4b1c9256c068
Faulting application path: C:\Program Files (x86)\AdobeCS3\Adobe InDesign CS3\InDesign.exe
Faulting module path: C:\Program Files (x86)\AdobeCS3\Adobe InDesign CS3\Required\APPFRAMEWORK.RPLN
Report Id: ec708910-b70f-11e1-ad4c-e840f209298e
There's also a .net crash but not with every instance of the InDesign crash.
Application: InDesign.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 0AD6B8B0
Stack:

Error message: "Unable to open the physical file" when trying to attach AdventureWorks database

I have searched the internet and this forum and have not found an answer...
I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005. I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'. I attempt to run the following script:
exec sp_attach_db @dbname = N'AdventureWorks',
@filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
@filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
The error message I get back is:
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write. I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist! They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
What do I have to do to install the AdventureWorkds database????

Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day

Unable to open the downloaded file

Unable to open the downloaded file:
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.1.0 -> for Windows x86 -> File2
http://www.oracle.com/technetwork/middleware/performance-management/downloads/hyperion-foundation-1112-086772.html
Error message -
Cannot open file: it does not appear to be a valid archive. If you download this file, try downloading the file again.
Tried many a times and used various unzipping tool.

do not pause the download in the middle of the download.
with some download software, you can pause/stop the download in middle and continue.it will corrupt the software.
else in middle the due to network... it may corrupt.
check/compare the size with the original bytes mentioned in the oracle software download index size matches your downloaded file size.
try to download it again.
Good Luck.

Unable to open Form Repsonse File

Hello,
I am unable to open a response file to one of my distributed forms.
I have made no changes to my system or the file. I get the following error
"To view the Flash technology content in this pdf file, please install this version of Flash Player that supports Adobe Reader and Acrobat"
If I click Proceed to download page, nothing happens.
Any suggestions??
NB: All other flash content works on this computer, Flash version 11,7,700,179

do not pause the download in the middle of the download.
with some download software, you can pause/stop the download in middle and continue.it will corrupt the software.
else in middle the due to network... it may corrupt.
check/compare the size with the original bytes mentioned in the oracle software download index size matches your downloaded file size.
try to download it again.
Good Luck.

Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

hi,
am running the below command for moving sql serevr mdf and ldf files from one drive to another : c drive to d drive:
but am getting the below error
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
use master
DECLARE @DBName nvarchar(50)
SET @DBName = 'CMP_143'
DECLARE @RC int
EXEC @RC = sp_detach_db @DBName
DECLARE @NewPath nvarchar(1000)
--SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
DECLARE @OldPath nvarchar(1000)
SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
DECLARE @DBFileName nvarchar(100)
SET @DBFileName = @DBName + '.mdf';
DECLARE @LogFileName nvarchar(100)
SET @LogFileName = @DBName + '_log.ldf';
DECLARE @SRCData nvarchar(1000)
SET @SRCData = @OldPath + @DBFileName;
DECLARE @SRCLog nvarchar(1000)
SET @SRCLog = @OldPath + @LogFileName;
DECLARE @DESTData nvarchar(1000)
SET @DESTData = @NewPath + @DBFileName;
DECLARE @DESTLog nvarchar(1000)
SET @DESTLog = @NewPath + @LogFileName;
DECLARE @FILEPATH nvarchar(1000);
DECLARE @LOGPATH nvarchar(1000);
SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
exec xp_cmdshell @FILEPATH;
exec xp_cmdshell @LOGPATH;
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
go
can anyone pls help how to set the db offline. currently i stopped the sql server services from services.msc and started the sql server agent.
should i stop both services for moving from one drive to another?
note: I tried teh below solution but this didint work:
ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
Update:
now am getting the message :
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
(3 row(s) affected)
(3 row(s) affected)
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

First you should have checked the database mdf/ldf name and location by using the command
Use CMP_143
Go
Sp_helpfile
Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
Database is already detached that’s why db offline failed
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
Attached step is failing as there is no mdf file
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
Solution:
Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

REP-0004 warning: Unable to open user preferance files

Hi,
I am new to R12. This is the upgradation project 11.5.1.2 to R12. we are newly installed the R12 application and 10g database.
I am going to customize the standard report 'Printed Purchase Order Report', the rdf file is 'POXPRPOP'. but it is not getting any out put and xml tags also. even standard report also not getting any output and I noticed in logfile that the error like 'REP-0004 warning: Unable to open user preferance files'.
I have tested in backend, its getting the data. then I have added command MO_GLOBAL.SET_POLICY_CONTEXT('S'.org_id) in before report trigger also. but getting same issue.
Could you please help me wheather I need do any setups/modifications in RDF or Application. This is very urgency.
Thanks in Advance.
Regards,
Thirupathi

Hi Hussein,
Thank you for your valuable response.
I have followed the same steps for this customization what they are given in the metalink ID 374165.1.
And one more thing, I am not getting any output if i ran the standard program 'Printed Purchase Order Report (Portrait)' in R12. what it could be the problem.
Regards,
Thirupathi

Unable to open the XML files in Nakisa

Hi Gurus,
We are unable to open certain XML files in Nakisa. They show up as encrypted in the notepad or fail to open using the XML Marker. The files in question are
AppResources.xml
LoginConfiguration_SAP_Standard
LoginConfiguration_Anonymous
Purpose: We want to enable the SSO with the portal . We have checked the radio button but nakisa does not recognize the SSO ticket from the portal (Any folder in Nakisa where we need to place the Portal ticket?)
Also we want Nakisa to show the org chart for the logged in user. Luke had mentioned that some changes need to be made in the AppResources.xml (hope i correctly remember this) and we were looking to make these changes (rather try out.. any pointers please..?)
Thanks and Regards,
Arun E V

Hi Arun,
These files are encrypted. If your organisation is a partner with Nakisa you can obtain the decrypter from them.
Portal SSO works without any configuration directly in the XML files. If you are getting an error stating that the Portal ticket cannot be interpreted then your configuration is not correct. In your URL iView you need to ensure the fully qualified domain name (FQDN) is used for the application URL. In the Administrator Console you need to ensure you enter the system details (Host, Sys Nr and Client) for the backend system which holds your SSO ticket for that Portal. You need to use FQDN here too.
There is additional security configuration that can be done in the XML files but SSO will still work with just the Administrator Console configuration.
I hope that helps!
Luke

Unable to open in pdf files in ipad 3 using adobe reader 10.2 but able to do so in ipad 2 using adob

Unable to open in pdf files in ipad 3 using adobe reader 10.2 but able to do so in ipad 2 using adobe reader x 10.1 .

Can you please share the file you are trying to open with us at [email protected]? Also, can you please confirm that you've updated the Adobe Reader on your iPad 3 to the latest version using iTunes or the AppStore app?

I am unable to open a PDF file in Firefox 4. I have no problem with IE8

I am unable to open a PDF file in Firefox 4. I have no problem with IE8

Hi Nupoorv,
Thanks for contacting us.
Could you please provide some details like from where you downloaded your pdf , and what happens when you click on 'Open in Adobe Reader' .
On tap on 'Open in Adobe Reader' does Adobe Reader application come in focus .
You can follow think link also which provide details of how you can open documents in Adobe Reader http://forums.adobe.com/docs/DOC-2532
Let us know if you still face problem.
Thanks
-Satyadev

When I open an encryted pdf file in my Hp Slate 7 voice Tab it was unable to open the pdf file.Tje same file was opening with other pdf reader software.Kindly Help.

When I open an encryted pdf file in my Hp Slate 7 voice Tab it was unable to open the pdf file.Tje same file was opening with other pdf reader software.Kindly Help.
[spam link removed]

Could you please send the pdf to [email protected] so that we may investigate the issue?
Thanks,
Adobe Reader Team

After updating silverlight, i'm unable to open any pdf files in the system

After updating silverlight, i'm unable to open any pdf files in the system

According to your User Agent you posted this question using Internet Explorer 11 on Windows 8.1. Are you having a problem with Firefox? What Firefox version?
You said you are having a problem opening PDF files on your system. Can you explain that better? Mozilla Support can help you with opening PDF files in Firefox, which uses a built-in PDF reader. Maybe one of these articles will help?
* [[View PDF files in Firefox without downloading them]]
* [[How to disable the built-in PDF viewer and use another viewer]]

How to import multiple files to the frame area?

How do I import multiple files to create animated GIF's. I
know how to import multiple files into the Fireworks, but if I'm
trying to create an animated gif that has alot of files, How do I
get them into the frames area. It is really a pain importing each
and every file one at a time frame by frame

merry1
after you bring in all your images to the canvas, select all
and in the
Frames Options drop down, select Distribute to Frames.
You can bring multiple images onto the canvas by copy and
pasting from
the folder(s) where they exist.
alex
merry1 wrote:
> How do I import multiple files to create animated GIF's.
I know how to import
> multiple files into the Fireworks, but if I'm trying to
create an animated gif
> that has alot of files, How do I get them into the
frames area. It is really a
> pain importing each and every file one at a time frame
by frame
>

Import multiple files

I have made plugin based on custom importer, now I can import media files using my custom GUI.
But now I'm little bit confused, is it possible to import multiple files using SDK ?
I mean:
1. Chose several clips in my GUI.
2. Click ok and files will be added to project.
Thanks.

Thanks for answer Steve.
But, how can it help me ?
I have found in docs:
imGetInfo8
param1 - imFileAccessRec8 *
param2 - imFileInfoRec8 *
Describe a clip, or a single stream of a clip if the clip has multiple streams. Called when a specific
file is instantiated. Importer checks file validity, optionally allocates file instance data, and de-
scribes the properties of the file being imported by populating the imFileInfoRec8.
and
imIterateStreams
Return from imGetInfo8 to indicate that there are more streams
to describe. Premiere will send imGetInfo8 for the next stream.
So, as I understand, imIterateStreams describes just media streams of single file,
but it has no relation how to specify multiple files during import.
Now I'm using imGetPrefs8 selector to specify file path.
Please explain me where I'm wrong.
Thanks,

Unable to Open/Import Multiple Files in Audtion 3 - Old Bug?

Similar Messages

Maybe you are looking for