Unable to open internal sites

Hi,
I am trying to test some sites internal to our orgnization (like the intranet or quality center etc.) but those sites won't show up. Instead I get a message - "Adobe BrowserLB was not able to load the URL requested"
Any solution for this?

Ok, here's the update as promised. About 4 days ago we released a new feature that integrates BrowserLab with Firebug.
Add-on download:
https://addons.mozilla.org/en-US/firefox/addon/231196/
As of the time I'm writing this, it still says that the add-on has not been reviewed by Mozilla. That information is incorrect - we're working with Mozilla to get that corrected.
Documentation:
http://help.adobe.com/en_US/cslive/cs/using/WS58a04a822e3e5010-7b304dbd1263439ac1b-8000.ht ml#WS0741ade7127e2fad-4cd1b9c1127453f3baf-8000
Once you have the add-on installed, navigate Firefox to the internal site you'd like to preview in BrowserLab, right-click on the add-on icon at the bottom of your browser and choose "Preview Local Source".
Hope this helps you out,
Mark

Similar Messages

  • I am unable to open web site havin extension .aspx

    i am unable to open web sites having extension .aspx one example is http://pteducation.com/default.aspx.
    == URL of affected sites ==
    http://pteducation.com/default.aspx

    Hey.. i changed the extension default.aspx to Default.aspx and it worked... hope it will help you :) simply write default in Default .. i mean ... simply write the d in caps..

  • Unable to open complete site on E61

    Hi, i recently have a new E61, earlier i can access any website on this e.g. Orkut or any other, but two or four days back, whenever i open orkut, it opens the homepage of orkut, but when i login it starts to download the page, but it keeps on fail. Kindly suggest why it is happening? I have tried to everything, but it is not working properly at all. Kindly suggest What should i do?

    Hi Eric, take a look at the following link:
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/241d44f4-fb4e-4ce7-b134-72e0a7257a49/unable-to-open-sharepoint-site-with-designer-folder-name-is-not-valid?forum=sharepointcustomization
    cameron rautmann

  • Unable to open https sites. can open when using firefox in safe mode.

    Mozilla Firefox has been an exceptional browser, however in the last update I have experienced problems when trying to open https sites. They will not open and then time out. I do not have this problem when using Internet explorer. I have contacted customer service at the problem sites, and they have said other customers have also experienced this problem. I have gone into options and have changed various settings to see if this would solve the problem. It didn't, your response would be appreciated.. Please note if I use firefox in safe mode I can access these sites? My E-mail as follows: [email protected]

    Did you perhaps install an extension to open sites with https
    # Type '''about:config''' into the location bar and press "Enter"
    # Use Find ("Ctrl+F") to look for '''https'''
    One such extension is "HTTPS-Everywhere"
    As you probably know Firefox Safe Mode disables extensions and some preferences.
    http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Extension_issues
    You posted a question here: you should check for all of your answers at...
    :Unable to open https sites. can open when using firefox in safe mode. | Firefox Support Forum | Firefox Help
    :https://support.mozilla.com/en-US/questions/872957
    You are expected to pick up your answers where you post them, in the upper right corner is a "get email updates" that you can click on. For more information, see my avatar icon to the left of my reply where you posted.

  • Just recently, Firefox messages that it is unable to open ne site or page

    When I have a site open and several sub listings are on that site, it will the majority of times, lately, say that firefox is unable to open that site or refused to

    See: [http://kb.mozillazine.org/Menu_differences Tools > Options] > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    * [[Options window - Advanced panel#General_tab]]
    See also: http://kb.mozillazine.org/accessibility.blockautorefresh
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • Unable to open web site

    Hi
    I am unable to open www.asx.com.au (the Australian Stock Exchange web site).
    www.isitjustme says it is ok and it's just me and one of my friends confirmed they were able to open the site.
    I have rebooted and also booted in safe mode and disabled AdBlockPlus and in safe mode the virus scanners appear to be off.
    I haven't been able to find the site listed anywhere on the iMac as being blocked, but am unsure where to start as this has not happened before.
    The problem cropped up earlier when I tried to open a spreadsheet in ApacheOpenOffice Calc and the links to import external data from their web pages failed. So I then tried to open the web site and can't open it. I have tried using Safari, Opera and Firefox. All other web sites are ok.
    Oh dear.... I just tried on my iPhone and that also failed to open the site.
    .....So does this mean that I need to contact the ASX tomorrow by phone or is there another possibility that I need to check.
    I though maybe the action of the spreadsheet upset them, but is has been fine for a long time, though I haven't opened it for a few weeks.
    Could it be the modem.... a NetComm NB9WMAXX
    Thanks
    Hardware Overview:
      Model Name:    iMac
      Model Identifier:    iMac7,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.4 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    4 MB
      Memory:    4 GB
      Bus Speed:    800 MHz
      Boot ROM Version:    IM71.007A.B03
    osx 10.6.8

    Just rebooted modem and now able to connect. I notice that the ASX web site has undergone a face lift so all the links in the spreadsheet may be broken and caused a bottleneck for me I suppose ????
    no replies thanks as is fixed now.

  • Unable to open internet sites

    Since yesterday, when trying to open some internet sites, using either Safari or Firefox, I get the same message:
    404 Not Found
    The requested URL /blog/reinaldo/ was not found on this server.
    Apache/2.2.3 (CentOS) Server at veja.abril.com.br Port 80
    Happens with some other sites too.
    Anybody experiencing the same problem?

    I am also having problems open certain sites since yesterday, but they DO open in a PC... just don't in Mac, either my Mac Pro or my Mac Book Pro. I tried all browsers Safari, Firefox, and Chrome. These are some of the sites with issues:
    http://www.yogaglo.com/
    https://www.amazon.com/gp/css/homepage.html?ie=UTF8&ref=topnavya
    and yesterday I was having issues with Hotmail as well and I am seeing a lot of people are having the same problems with other sites.

  • Unable to open https: sites

    Unable to open https: sites

    Did you check your security software (firewall)?
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.<br />
    Also make sure that the firewall doesn't intercept secure connections via port 443.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

  • Unable to open a site in Designer 2013

    Hi,
    I wanted to open a site, which is at level 3 from the top site in Designer 2013, but i get this message: "You do not have permissions to open this web site in SharePoint Designer"
    Example: http://sharepoint.contoso.com/sites/siteA/siteB
    Any guesses please ?
    Many thanks !

    did you check whether you actually have permission?
    did you check whether SPD was blocked by admins?
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Unable to Open Project Site Access Denied Issue Project 2013

    This issue is happening to select projects and select project managers, they can view certain project sites but receive the error on other projects.  After some extensive testing
    it looks like if the PM is the owner of the project plan they are not getting added to any of the synced groups for the project site.  I can change the project owner to any another PM and it processes correctly and adds them to the PM synced group on
    the Project site.  As soon as I make the original PM the Project plan owner again the previous PM gets removed from the PM synced group and added to the Team member synced group, the way its supposed to work.  However the PM with the problem never
    gets added to any group.  I have to manually add them to the non-synced Owner group on the project site so they don't get removed from the synced PM group the next time the sync runs at midnight.
    As I stated it is happening on select project plans and select PMs.  I have tried replublishing the project plan via Project professional and the web and the results are the same. 
    If I create a new project plan and assign one of the PMs with the issue to the plan everything works correctly.  We noticed the issue a few weeks ago; most of the plans with the issue are several months to a year old so they were working correctly until
    recently.  They had also made PM owner changes prior to the issue on most of those plans and everything worked correctly.
    If anyone is experiencing this issue and has a fix please let me know.  I am trying not to open an MS support ticket if possible.
    Frank Miranda Florida Hospital MIS

    I believe I've found the fix for this issue.  After opening a ticket with MS support and not getting anywhere with this issue I decided to do an in-depth review of all the Project and SharePoint 2013 CU's starting with December 2013 to September 2014. 
    To my amazement buried inside the July 2014 CU was a hotfix for this issue described almost word for word. (I will list all the relevant KB's at the end)  I contacted my support engineer inquiring about this hotfix and he stated it wasn't relevant because
    the "Synchronize Project Web App permissions to Project Site" was not failing or even generating any warnings in our Prod or Test environments.  I stated that is not always an indicator as ULS doesn't always catch all relevant errors.
    I informed him that I also found a second hotfix pertaining to the same issue released August 2014, apparently the first hotfix in July didn't totally resolve the issue and a second hotfix was released.  He was adamant that this would not resolve
    our issue and he requested or production databases because he was unable to replicate the issue in his test environment.  The reason, you may wonder, is because he was at a higher patch level that our farm.... Obviously!  His farm had the most current
    CU which included the hotfixes from July and August.  Apparently he didn't see the flaw in his logic.
    I decided to install the September CU on our test farm. Low and behold that fixed the problem, even though MS support stated the hotfix was not relevant to our issue.  I learned a long time ago to take MS support comments as suggestions instead
    of gospel truth, this isn't the first time they have confidently given me erroneous information.
    We are currently doing further testing to verify that this CU didn't break something else.  Unfortunately these rollups are not GA and Microsoft is very clear that you should only install them if the hotfixes pertain directly to your issue.
    Finding the hotfixes was a chore as Microsoft loves to create multiple KB's for the same thing and then nest (bury) them so you have to dig through four or five KB's to find the relevant fix.  I'll save you the trouble and list them below.
    Watch the
    September CU Webcast Brian Smith and team go into depth explaining why this issue has been happening and how they fixed it.
    September 2014 CU http://support.microsoft.com/kb/2882990 (the one I installed)
    August 2014 CU https://support.microsoft.com/kb/2989078
    August Project site sync hotfix
    https://support2.microsoft.com/kb/2883083
    July 2014 CU http://support.microsoft.com/kb/2882990
    July Project Site Sync hotfix http://support2.microsoft.com/kb/2882995
    Microsoft Project Server Blog
    http://blogs.technet.com/b/projectsupport/  (I find this to be more helpful than the TechNet site)
    Frank Miranda Florida Hospital MIS

  • Unable to Open Project Site Access Denied Issue (Project Manager)

    Hi 
    We got an issue that one project manager is having 12 projects, in that she can able to view 5 projects-- project sites but remaining 7 projects --- she is not able to open the project site (access denied) error is throwing when she try to open.
    She is the project manager of the 12 projects and having project manager permissions on the project sites.
    Please suggest any solution for this.
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

    I believe I've found the fix for this issue.  After opening a ticket with MS support and not getting anywhere with this issue I decided to do an in-depth review of all the Project and SharePoint 2013 CU's starting with December 2013 to September 2014. 
    To my amazement buried inside the July 2014 CU was a hotfix for this issue described almost word for word. (I will list all the relevant KB's at the end)  I contacted my support engineer inquiring about this hotfix and he stated it wasn't relevant because
    the "Synchronize Project Web App permissions to Project Site" was not failing or even generating any warnings in our Prod or Test environments.  I stated that is not always an indicator as ULS doesn't always catch all relevant errors.
    I informed him that I also found a second hotfix pertaining to the same issue released August 2014, apparently the first hotfix in July didn't totally resolve the issue and a second hotfix was released.  He was adamant that this would not resolve
    our issue and he requested or production databases because he was unable to replicate the issue in his test environment.  The reason, you may wonder, is because he was at a higher patch level that our farm.... Obviously!  His farm had the most current
    CU which included the hotfixes from July and August.  Apparently he didn't see the flaw in his logic.
    I decided to install the September CU on our test farm. Low and behold that fixed the problem, even though MS support stated the hotfix was not relevant to our issue.  I learned a long time ago to take MS support comments as suggestions instead
    of gospel truth, this isn't the first time they have confidently given me erroneous information.
    We are currently doing further testing to verify that this CU didn't break something else.  Unfortunately these rollups are not GA and Microsoft is very clear that you should only install them if the hotfixes pertain directly to your issue.
    Finding the hotfixes was a chore as Microsoft loves to create multiple KB's for the same thing and then nest (bury) them so you have to dig through four or five KB's to find the relevant fix.  I'll save you the trouble and list them below.
    Watch the
    September CU Webcast Brian Smith and team go into depth explaining why this issue has been happening and how they fixed it.
    September 2014 CU http://support.microsoft.com/kb/2882990 (the one I installed)
    August 2014 CU https://support.microsoft.com/kb/2989078
    August Project site sync hotfix
    https://support2.microsoft.com/kb/2883083
    July 2014 CU http://support.microsoft.com/kb/2882990
    July Project Site Sync hotfix http://support2.microsoft.com/kb/2882995
    Microsoft Project Server Blog
    http://blogs.technet.com/b/projectsupport/  (I find this to be more helpful than the TechNet site)
    Frank Miranda Florida Hospital MIS

  • Unable to open Sharepoint site with Designer "Folder name is not valid"

    Hi all,
    I'm using SharePoint 2013 with SharePoint Designer 2013, but currently I'm facing a weird behaviour.
    I can open my preproduction SharePoint portal with SharePoint Designer 2013, but when I'm trying to open my production environment, I'm receiving the error "The folder name is not valid". Even it doesn't ask for credentials.
    Anyone knows what is happening?

    There are few other options people used to solve this issue. refer to the following posts if you haven't so far. hope it helps.
    http://hightechdave.com/sharepoint-designer-the-folder-name-is-not-valid-error/
    http://mesiag.blogspot.com/2011/10/sharepoint-designer-2010-folder-name-is.html
    http://community.office365.com/en-us/f/154/t/11825.aspx
    Cheers,

  • Unable to open web sites.

    I can't seem to open any websites or the App Store on my MacBook Pro. I have internet connection. I know it's not my internet because I'm able to access websites on my tablet and phone using my wi-fi. What could be wrong with my laptop.

    Hi NotafanofAPPLEproducts,
    Thanks for using Apple Support Communities.  This article has some steps you can try on your MacBook Pro to see if you can successfully view websites:
    OS X Mavericks: Solve problems
    http://support.apple.com/kb/PH14374
    Problems connecting to the Internet
    If you can’t connect to the Internet, there may be a problem with your cables, your devices, your network settings, or your Internet service.
    First, try using Network Diagnostics, which can diagnose and resolve most problems.
    If you have a wireless network, make sure your Mac is communicating with the router and that the router is connected to the Internet.
    If your router is an AirPort Base Station, open AirPort Utility, then choose Help > AirPort Utility Help.
    If your router is from a manufacturer other than Apple, refer to the router’s documentation.
    Make sure all cables are firmly connected.
    Make sure all external devices such as modems, hubs, and routers are plugged in, turned on, and have started up completely. Try resetting these devices by unplugging them for a couple of minutes, then plugging them back in.
    Check indicator lights to make sure your modem or router is registering a connection to the network and to your Mac. If an indicator light does not come on, see the documentation that came with the device or contact your ISP.
    Make sure you have the correct settings for your type of connection. Open the Network pane of System Preferences and check the status of each network service, such as Ethernet, Bluetooth, and AirPort. The network service you are using should have a green indicator and the word “Connected.”To view more information about your network service, click to highlight it. For additional help, click the “Assist me” button.
    Cheers,
    - Ari

  • Unable to view Internal site not published for public in Browserlab...

    I have to test my website which is not published to public, its under the firewall of my company..
    When I give that url in Browserlab gtting Authentication Required(403) error..
    How I can use browser lab to test the URL

    This blog post has a detailed description of all the options you have with BrowserLab for exactly that:
    http://blogs.adobe.com/browserlab/2011/08/22/testing-private-content-with-browserlab/
    Hope this helps,
    Mark

  • Unable to open secure(https) site in some profiles

    unable to open https sites
    == URL of affected sites ==
    https://www.google.com/accounts/ServiceLogin?service=mail&passive=true&rm=false&continue=http%3A%2F%2Fmail.google.com%2Fmail%2F%3Fhl%3Den%26tab%3Dwm%26ui%3Dhtml%26zy%3Dl&bsv=1eic6yu9oa4y3&scc=1&ltmpl=default&ltmplcache=2&hl=en

    Hi Srini,
    Check the job overviews and spools using T code SM37.  Verify that there were no errors when running AJAB and AJRW.  Also, check the last fiscal year closed for each Comany Code using T code OAAQ.
    Some clients are kept more up-to-date than others.  For example, the Development and Quality clients may not be as up-to-date as the Production client.  Verify that depreciation ran for all months up to the closed fiscal year (if not ran, will see error in SM37), and verify that all previous years have been closed (last closed fiscal year can be seen in OAAQ).
    Hope this helps!
    Thanks,
    Chad

Maybe you are looking for

  • Frontrow left running @ 100% after returning to Desktop - bugfix required

    Tonight my wife and I were watching iTunes TV Show Videos on our living room TV using her black Macbook with lid closed for about 4-1/2 hrs. I had downloaded these TV videos with iTunes on my PowerMac G5 and shared them to the Macbook. The Macbook wa

  • How Can I Fix A QuickTime Codec Error?

    How Can I Fix A QuickTime Codec Error? I have several movies from 2008 that are labeled as .mov but I now get a QuickTime error saying "The document "XXXXXX" could not be opened. A required Codec isn't available." These movies ran in QuickTime just f

  • I can't find the QuickTime icon in System Preferences to upgrade to Quicktime 7 Pro

    I just purchased a license key for QT7 Pro and the instructions say to go to System Prefs and click on the QuickTime icon. That's all well and good except for the fact that the icon is not present there. The QT X player is installed, however. What to

  • How to convert cXML dtd files into xsd format and use them into BPEL application

    Hi, In my BPEL application I have to use cXML dtd files by converting them into xsd format. I have used 'Microsoft Visual Studio' for converting cXML.dtd file into xsd format, for this 1 dtd file I am getting three xsd files (cXML.xsd, cXML1.xsd and

  • IPhone4 will not update with iOS5

    I have the iPhone 4 and have been unable to download the iOS5 update. My phone downloads the file but then sits idle and will not complete the installation. I have let it sit overnight and still no luck. Has anyone else had this issue? How do I fix i