Unable to open JPG file, getting "unknown or invalid JPEG marker was found", help needed

Info:
MS Windows 7 Home Premium 64-bit SP1
Adobe Photoshop 64bit CS5 etxended (Version 12.0 x64)
So downloaded some JPG files from the web and trying to use some of them as wallpapers. I am able to open them in Windows viewer and some other prgrams but they are the wrong size for my screen so I wanted to change the resolution and opened them into CS5 and sound that some of them would not open. I am getting the following error "Could not complete your request because an unknown or invalid JPEG marker was found" and yet there does not seem to be anything I can do to resolve this to open them into CS5.
Any thoughts or advice?

Open them into another viewer, copy, then FIle-New in Photoshop and Paste.
Photoshop is picky and a file that does not properly follow the JPEG standards could cause this kind of problem. Other apps are sometimes more forgiving.
-Noel

Similar Messages

An unknown or invalid jpeg marker is found

"an unknown or invalid jpeg marker is found"
jpegs being corrupted when copied
Each one, in different folders, copied from my MacBookPro’s desk top, all rendered out as a full sized jpeg, 300dpi, but then when I transfer them onto another HD, they all render out as the correct MB size (12MB etc), but they are sized 256 x 171 in the Bridge Info panel and none will open in Preview or Bridge or Photoshop, “Could not complete your request as an unknown or invalid jpeg marker is found"
They worked fine originally. Other files etc work well on the HD. i do not use anything other than jpeg and the original RAW files so all extensions are correct.
Thanks

You are correct in that this particular message means your files are hosed.
Your external HD could be going south, or the connection may be faulty, check all cable ends, the computer ports, etc.
How are you "transferring" them? That's a term that gives me hives.

Yesterdat's saved photo won't open, getting unknown or invalid JPEG marker?

Why is yesterday's saved work file not openning? getting unknown or invalid JPEG marker

It sounds like the file thinks it is JPEG for some reason, and it's not really JPEG or has been corrupted.
You wouldn't get a JPEG error on a PSD file.

How do I fix "Could not complete your request because an unknown or invalid JPEG marker type is found"?

Could not complete your request because an unknown or invalid JPEG marker type is found
The above messagecomes up on a lot of my photoshop files that have been recovered from a damaged disk - can this be fixed?
Thanks, Phil.

That's a pretty good indication that the data inside the files is corrupted.
You *might* be able to get some of the image back by opening it in different tools that can open JPEGs. But very likely none will be able to recover all the image data perfectly.
Check Irfan View as a viewer with some resiliency for opening corrupted files.
-Noel

Unable to open Raw files from Nikon D800 in Photoshop CC [was:raw updates with creative cloud?]

i have a d800, bridge or photoshop do not seem to support the raw files, i am using CC and bridge will not bring up the thumbnails and photoshop will not open the files at all, can anyone help?

[Moved from Cloud forum to Camera Raw forum]
ACR = Adobe Camera Raw.
ACR is the plugin used by Photoshop to read and process Raw files from cameras. It must be updated every time a new camera comes on to the market.
The Nikon D800 has been fully supported since ACR7.1
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
ACR7.1 is compatible with Photoshop CS6 and later
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
So, if you are in fact using Photoshop CC, there should be no reason that Raw files cannot be opened.
In Photoshop, click:
Windows: Help > About Plug-In > Camera Raw
Mac: Photoshop > About Plug-In > Camera Raw
Which version number is shown?
Are you using Nikon transfer software to get the Raw files from your camera to your computer?

Unable to open Lab-view - getting pop-up "unable to open resourse files"

Hi
I have had Lab-view 7.1 running on my PC for months. On loading up this morning I got the pop-up "unable to open resourse files".
Presumably this is a fatal error and I need to uninstall then reinstall. The rest of my PC applications are working fine. Has anybody else had this problem?
Regards
Ashley

hi there
when i rename or remove the directory ..\National Instruments\LabVIEW 7.1\resource i got the same error message as you. check this directory. i attached a list of contents of my LV 7.1 resource directory. the contents of your own directory may differ.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
Resource_LV71.txt ‏5 KB

Getting pop up 'Unable to open resource files'

Hi all,
I am having one PXI system which consistes of following hardware.
1. 1042 Chasis
2. PXI8106 controller
3. 7831R FPGA
4. 6509
5. 6221
Out of nowhere, I am now getting a dialog box mentioning 'Unable to open resource files' after trying to open the executable file.
Can any one please guide me on this front.

hi there
when i rename or remove the directory ..\National Instruments\LabVIEW 7.1\resource i got the same error message as you. check this directory. i attached a list of contents of my LV 7.1 resource directory. the contents of your own directory may differ.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
Resource_LV71.txt ‏5 KB

My recipient is getting response that the file I sent is not available or they are unable to open any files that I send.

My recipient is getting response that the file I sent is not available or they are unable to open any files that I send. I did not have this problem in the previous version of Adobe Send.

Thanks for replying.
If he's reading the email in Outlook, that shouldn't break up the links.
Do you know: is your recipient clicking on the View File button or the URL link?
Lastly, if the file you're sending is not confidential, would you mind sharing it with me so that I can try to reproduce your recipient's issue? I will send you my email address privately.

Unable to open AVI files in Photoshop CS6

Unable to open AVI files in Photoshop CS6
I am running PS6 and want to open and edit AVI files. When I try to do that I get an error message saying "the video file cannot be opened" . This seems to apply to ALL avis - yet I can open and edit MP4, MMV etc. I installed Gspot to track whether it was a codec issue and when I try to open ANY file I get this error message : "Warning: DirectShow crashed while GSpot was attempting to obtain information about a codec. This is usually due to damaged, misconfigured, conflicting, or poorly written codec drivers. It is possible, perhaps even likely, that other media players will crash when they attempt to play this file as well, as most of them will also use DirectShow. GSpot was able to intercept the crash, and has attempted to identify the codec or filter involved; uninstalling or reinstalling this codec or filter may solve the problem. The codec was tentatively identified as: C:\Windows\system32\imaadp32.acm Unknown video codec #11" I have NO idea where to go from here. I see a site to download the "imaadp32.acm" codec but what about the "Unknown video codec #11". What the heck is that and what do I do about it. Any help would be appreciate, Cliff
ps I should add that the avi files DO open and play in Bridge. I have the latest Quicktime. Everything is up to date and PS and the computer is otherwise working perfectly !

Thanks Curt and 'Mylenium'
I did re-set the prefs - but to no avail
I checked and my graphics driver and audio is all up to date.
No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
Cliff

SegFault PCC-S-02015 unable to open include file

Hi,
I have problems to get the precompiler running - executing the
precompiler leads to a segfault.
btw: don3t have ORACLE_HOME/precomp/demo/proc
oracle@los13529 > make -f demo_plsql.mk examp9
sqlplus scott/tiger @exampbld </dev/null
System default option values taken from:
/oracle/precomp/admin/pcscfg.cfg
Error at line 53, column 1 in file examp9.pc
EXEC SQL INCLUDE SQLCA;
1
PCC-S-02015, unable to open include file
make[1]: *** [examp9.o] Segmentation fault
make[1]: Leaving directory `/oracle/plsql/demo'
make: *** [examp9] Error 2
a 'strace' says:
oracle@los13529:/oracle/plsql/demo > strace proc examp9
open(ptrace: umoven: Input/output error
0x85a7dc0, O_RDONLY) = -1 ENOENT (No such file or directory)
i have to admit, i had to change /oracle/precomp/admin/pcscfg.cfg
as follows and set two links in order to fix include errors on
stdarg.h and stddef.h:
/oracle/precomp/admin/pcscfg.cfg:
sys_include=(/usr/include)
include=(/oracle/precomp/public)
include=/oracle/precomp/hdrs
include=/oracle/tpcc2x_2/src
include=/oracle/precomp/include
include=/oracle/oracore/include
include=/oracle/oracore/public
include=/oracle/rdbms/include
include=/oracle/rdbms/public
include=/oracle/rdbms/demo
include=/oracle/nlsrtl/include
include=/oracle/nlsrtl/public
include=/oracle/network_src/include
include=/oracle/network_src/public
include=/oracle/network/include
include=/oracle/network/public
include=/oracle/plsql/public
ltype=short
oracle@los13529 > l /usr/include/std[ad]*
lrwxrwxrwx 1 root root 57 Mar 15 10:18 /usr/include/stdarg.h
-> /usr/lib/gcc-lib/i486-linux/egcs-2.91.60/include/stdarg.h
lrwxrwxrwx 1 root root 57 Mar 15 10:18 /usr/include/stddef.h
-> /usr/lib/gcc-lib/i486-linux/egcs-2.91.60/include/stddef.h
system related info:
oracle@los13529:/oracle/plsql/demo > uname -a
Linux los13529 2.2.3 #1 Wed Mar 10 14:54:34 MET 1999 i586
unknown
oracle@los13529:/oracle/plsql/demo > cc --version
egcs-2.91.60
path/environment-settings seem to be proper:
johndoe@los13529:/home/johndoe > set|grep orac
LD_LIBRARY_PATH=:/oracle/lib
ORACLE_BASE=/oracle
ORACLE_HOME=/oracle
ORACLE_PATH=/oracle/sqlplus
ORA_NLS32=/oracle/ocommon/nls/admin/data
ORA_NLS33=/oracle/ocommon/nls/admin/data
PATH=/oracle/bin:/oracle/buildtools/bin:/usr/local/bin:/usr/bin:
/usr/X11R6/bin:/bin:/usr/games/bin:/usr/games:/opt/kde/bin:.
TNS_ADMIN=/oracle/network/admin
ora/listener-connect is OK, even ODBC from a W95-client works:
johndoe@los13529:/home/johndoe > sqlplus scott/tiger@quad
SQL*Plus: Release 8.0.5.0.0 - Production on Mon Mar 15
14:8:18 ...
SQL> select count(*) from tab;
COUNT(*)
17
SQL> exit
Disconnected from Oracle8 Release 8.0.5.0.0 - Production
PL/SQL Release 8.0.5.0.0 - Production
please give me a hint. mailto:[email protected]
null

Karl Esau (guest) wrote:
: Hi,
: I have problems to get the precompiler running - executing the
: precompiler leads to a segfault.
I meanwhile solved the problem, so that I can compile and
run the samples.
a strace on 'proc' showed:
open("/oracle/precomp/public/SQLCA.H", O_RDONLY) = -1 ENOENT
(Nosuch file or directory)
I made a symbolic link for an upper case SQLCA.H, needed to add
SQLCHECK=SEMANTICS in ~/precomp/admin/pcscfg.cfg and one more
lib for the make: /lib/libdl.so.2 because 'dlclose' and other
symbols were undefined.
bye
Karl Esau
null

New macBook Pro unable to read .jpg file

Hi,
My new MacBook was unable to read the .jpg files from the DVD Rom which I was trying to load the pictures from.
Does anybody have any resolution to this problem?
Previously I was able to load photos directly from my camera to the machine but I wasn't able to do it this time using the DVD ROM.

jpg files can be viewed with Preview or Safari - how have you set the Mac to handle them ?
Select a jpg and Get Info (command I) and see what it's set to open them with, if not the application you want then set Open Using to the required one then hit Change all before you close the Info window.

ERROR: Unable to open TUXCONFIG file

Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PM

Hi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM

ERROR: Unable to open structapps file!

Hello,
Having modified the structapps.fm in FM10, I am getting the following error within a dialog when attempting to use the same file in FM8:
ERROR: Unable to open structapps file! FA_errno -43
Is FM not backward compatible ? OR do I need to reread the file in FM8
Thanks

The file should be saved in the FM version that you're using it in. You can't use any newer FM version file in any older version of FM, e.g. FM8 can't open any FM10 files (except for the MIF formats).

ZAV 10 - Unable to open parameter file error

When trying to launch a ZAV 10 app, C-Cure Administration Console, users are getting an error "**Unable to open parameter file cc800cl.pf, errno 2. (1247)". This only appears to be happening on Win7. This did work when first created, but after a few weeks the error has started to pop-up.

If this was working and is not now, and you are certain nothing has changed on the client systems (or at least nothing that could interfere here), then this might be an issue with the license used when building the application. What is the expiry date of your license and was it applied prior to building this exe?
If this isn't expiring please open an SR for this issue, if you can. This is the information the support team will require:
- Copies of any warnings or errors around the time the issue occurs (or a copy of the application and system event logs, in .evtx format)
- A copy of the exe you are using
- If you can build the exe again as a diagnostic-mode executable and provide the diagnostics generated when attempting to run, that can be very helpful
- It may also be required that you send installation media for the application and your build process, so the team can attempt to reproduce the issue in-house
- You will also typically be asked for the .xappl file and associated Files folder, if reproducing in-house is required. This will become absolutely necessary if a ticket needs to be filed with Spoon, so sending it ahead of time is a good idea

Unable to open pst file error details access to the path is denied

Hello,
iam trying to do a mailboximport-request from a QNAP-nas that is member of the domain.
When doing the mailboximport i am getting the following error : unable to open pst file error details access to the path is denied.
Which permissions do i need to have on the folder/file on the qnap to import the .pst-file?
Thx

Move your PST files to a windows server. Exchange Trusted Subsystem is a universal group in Active Directory.
Read more here: http://technet.microsoft.com/en-us/library/ee633455(v=exchg.141).aspx#Pre
Mike Crowley | MVP
My Blog --
Planet Technologies

Unable to open JPG file, getting "unknown or invalid JPEG marker was found", help needed

Similar Messages

Maybe you are looking for