Unable to open Mail Preferences, can't remove/add accounts.

Sorry I posted this under Tiger discussions as well, but it wasn't my intention. I am running Leopard now:
- I upgraded to Leopard today. My mail application that I have been using all along has been Entourage, but decided to switch to Mail.
- Setup walked me through and I configured another account (besides the .mac account created automatically).
- I wanted to change settings of the newly configured account, but when I go to Mail->Preferences... NOTHING HAPPENS!
- Tried reinstalling Mail from CD. Tried rebooting MAC. Tried removing and reinstalling again... nothing!
So I can't open Mail Preferences to modify existing accounts. What can I do?

Ernie,
Thanks again.
This is strange indeed! I can not do what you suggested. We must not be on the same page.
When I select the Mail pull down menu right under "About Mail" is the "Preferences" item. There are a series of periods behind it which usually indicates more options when the item is selected or highlighted. In this case nothing happens until it is selected at which you are taken to a "general" screen full of items with scroll through lists to select from. Accounts is not an item. Holding down the option key doesn't change the results at any point I tried.
My Mail version is 3.0 (912.1/912).
I may have to give up on Mail and go back to Entourage or thunderbird.
Dan

Similar Messages

  • Trying to open mail preferences in OS X 10.8.2 blocks mail application.

    I'm currently working with OS X 10.8.2. Mail seems to work properly, but when I try to open mail preferences but nothing happens. I can only see the "rainbow wheel" and mail is blocked. I can only force mail's shutdown. Other applications wprks properly.
    Could anybody help me? Tx a lot. Riccardo.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Unable to open mail

    I am unable to open mail.  Up until yesterday, I had no problem whatsoever.  Now when I click on the mail icon on my desktop nothing happens. Is there a way to enable my mail?

    This may work or not:
    First, if you're running Lion you need to open Terminal and copy/paste then hit return.
    chflags nohidden ~/Library
    This will allow you to see your home folder Library.
    Next you have to find this file
    com.apple.mail.plist
    in your home folder Library called Preferences and move it to the Trash. Don't empty the Trash yet. If this doesn't help, you can always move it back. I don't run Lion, but there should be a File>Put Back option when it's in the Trash.
    But, important, before you do that, you need to make a backup copy of your Mail folder. For directions, see my post in this recent thread. It begins, "just in case."
    https://discussions.apple.com/message/17311174#17311174
    Do all of the preceding with Mail quit. Next open Mail and you will be asked to set up a new Mail. So, you must remember or write down all your settings in any of your accounts, both for incoming and outgoing.

  • Unable to open https sites. can open when using firefox in safe mode.

    Mozilla Firefox has been an exceptional browser, however in the last update I have experienced problems when trying to open https sites. They will not open and then time out. I do not have this problem when using Internet explorer. I have contacted customer service at the problem sites, and they have said other customers have also experienced this problem. I have gone into options and have changed various settings to see if this would solve the problem. It didn't, your response would be appreciated.. Please note if I use firefox in safe mode I can access these sites? My E-mail as follows: [email protected]

    Did you perhaps install an extension to open sites with https
    # Type '''about:config''' into the location bar and press "Enter"
    # Use Find ("Ctrl+F") to look for '''https'''
    One such extension is "HTTPS-Everywhere"
    As you probably know Firefox Safe Mode disables extensions and some preferences.
    http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Extension_issues
    You posted a question here: you should check for all of your answers at...
    :Unable to open https sites. can open when using firefox in safe mode. | Firefox Support Forum | Firefox Help
    :https://support.mozilla.com/en-US/questions/872957
    You are expected to pick up your answers where you post them, in the upper right corner is a "get email updates" that you can click on. For more information, see my avatar icon to the left of my reply where you posted.

  • Custom Oracle Report errored with Enter Password:  REP-0004: Warning: Unable to open user preference file. REP-0300: ORACLE error occurred. REP-0069: Internal error REP-57054: In-process job terminated:Terminated with error:  REP-300: ORACLE error occurre

    Hi Gurus
    We have created a custom oracle report and concurrent program and when we ran the concurrent program it is error out with below error
    Enter Password:
    REP-0004: Warning: Unable to open user preference file.
    REP-0300: ORACLE error occurred.
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-300: ORACLE error occurred.
    Can any one help us
    Thanks in advance.
    Kumar

    Please see
    REP-0004 Warning - Unable to Open User Preference File. (Doc ID 26014.1)
    ApPsMaStI
    sharing is Caring

  • REP-0004: Warning: Unable to open user preference file.

    Hi,
    I am creating an invoice header in Payable through open interface in r12. I have inserted one line in  ap_invoices_interface table.
    When I run Payables Open Interface Import request, it completes normal but invoice does not create.
    Please see below log file and provide your guidence.
    Payables: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    APXIIMPT module: Payables Open Interface Import
    +---------------------------------------------------------------------------+
    Current system time is 24-DEC-2013 12:39:46
    +---------------------------------------------------------------------------+
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    p_source='MANUAL INVOICE ENTRY'
    p_batch_name='test4'
    p_purge_flag='N'
    p_trace_switch='N'
    p_debug_switch='N'
    p_summary_flag='N'
    p_commit_batch_size='1000'
    p_user_id='19334'
    p_login_id='2499994'
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.AR8MSWIN1256
    Enter Password:
    REP-0004: Warning: Unable to open user preference file.
    MSG-00000: 0 invoice(s) were created during the process run
    MSG-00000: 0 invoice(s) were fetched during the process run
    MSG-00000:  summarize flagN
    MSG-00883: After Repport Trigger: Setting the Org Context to Multiple
    Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 24 12:39:47 2013
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Regards
    Farooq

    Please also see if the following docs help.
    R12: Master Troubleshooting Guide for Supplier Contacts Open Interface Import Report (APXSCIMP) [Video] (Doc ID 1373699.1)
    R12: REP-0004 Error While Running Supplier Contacts Open Interface Import Program (APXSCIMP) (Doc ID 1195815.1)
    R12: APXSUIMP Ends With REP-0004 Error, But Output Does Not Display Reason for Rejection (Doc ID 1060824.1)
    Thanks,
    Hussein

  • I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

    I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
    I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
    help?

    command-option-esc keys and force quit Mail. Then relaunch.

  • Unable to open System Preferences

    I am unable to open Systems Preferences on my MacBook Pro. I click on Systems Preference in the Apple Menus and it flashes but does not open. Thanks.

    By Apple Menus, I mean the Apple symbol on the top left. Then I select "system preference" and click on this. It does not open.
    I see thanks for explaining.
    Where do I find the Applications - System Preferences? I thought this was it. Thank you for your response.
    Open a Finder Window and you should see a folder called Applications or using your Dock click on Applications (probably on the far right of the Dock).
    BTW did you try restarting your computer? That helps in many situations like this.

  • I cannot open mail preferences.  anytime i go to mail preferences mail crashes

    anytime i open mail preferences the mail program crashes.  i have reinstalled mountain lion and this did not solve the issue.  I am looking for any solutions other than erasing my entire computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot. 
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • I have just updated my mac but now I am unable to open my itunes can someone help me please

    I have just updated my mac but now I am unable to open my itunes can someone help me please

    This worked for me:
    1 Go to the finder menu bar at the top of the screen
    2Click go
    3 click applications
    4 go down to iTunes and right click on Show Package Contents
    5 open contents folder then go to mac os folder
    6 open the terminal marked iTunes in that folder
    This should force it to open and function enough, it will not allow importing of music from a desk top

  • I am unable to open Mail since last Yosemite update

    I have been unable to open Mail since the last OS X Yosemite update on my iMac
    I have tried double clicking on mail in Applications as suggested in Mail Help but to no avail.

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Unable to open mail program as of this morning...Nov 23, 2013

    As of this morning, Nov 23, 2013 unable to open Mail program with Maverick. Yesterday lost both Western Digital drives...any chance of recovering data?

    Please update Firefox to 3.6.17 a.s.a.p. the reason being that there was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
    See also: http://blogs.comodo.com/it-security/data-security/the-recent-ra-compromise/

  • TS3103 I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)

    I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)

    Please see
    https://discussions.apple.com/thread/4311280?tstart=0

  • I can't open mail/ message "can't use this version of mail with Mac OS X  this occurred after security update

    I can't open mail/ message "can't use this version of Mail wigh this version of Mac OS X" this change occurred after a security update. tried to open in application with same responce.

    Mac OS X v10.6: "You can't use this version of Mail…" alert after installing Security Update 2012-004

  • Message: we can't remove windows accounts

    We have installed Office 2013 Pro Plus via our E3 O365 subscription. It automatically connects the components (Word, Excel, ...) to the domain user account [email protected] in
    our case.
    We want to get rid of that account and connect Word, etc to the O365 account of each user.
    It turns out that we misspelled the name of a new user in Active Directory. We corrected the error in the name in AD, but the name still has the error in Word, and other Office programs. Where can we correct the name or how can we get rid of this account and
    change it in the O365 account?
    We can setup a connection to the O365 account but everytime an old document (= created/opened earlier with a connection to the .local account) is opened it hooks up to the .local (domain account).
    We can not sign out of the .local account, then we get "We can't remove Windows accounts"
    A solution is really appreciated.!

    Because once you use Disk Utility to do any repartitioning after creating the BC partition, then BCA cannot manage the disk any more. Too bad you did not first read the BC documentation that you can print out from BCA.
    What you need to do:
    Drive Preparation
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Maybe you are looking for

  • ABEND while creating file in the application server

    Dear All, Please provide the solution for the following. REPORT ZMAIN. SELECT BKORM UP TO 1000        EXTRACT ext. ENDSELECT Imagine, now the extract file having 1000 Entries   Reading the above EXTRACT file LOOP .          submit ZSUB. ENDLOOP. End

  • Cannot print - troubleshooting help

    I am using an oldish pdf generator (header is PDF1.0) and cannot print the document, although it looks fine on-screen The generator embeds full (non-subset) T1 fonts summary: print (to ps file) - fails (in reader) print(to ps file)  as image - fails

  • Web Dynpro ABAP and Case Management

    Hi there! How do i implement a case management subcomponent in web dynpro ABAP? For classic GUI this is done by implementing the interface IF_SCMG_SUBCOMPONENT or by making CL_SCMG_SUBCOMPONENT_SP the superclass of your own class. But i don't know ho

  • CAD SQL Instance Name match

    Looking for clarification on CAD installation with SQL Data Store. The CAD Installation Guide states "It is required that your system include a separate SQL Server instance that hosts the CAD base services (on both servers in a replicated system). Th

  • Windows 8 setup does not prompt for license key, then fails, on hp envy notebook

    Hi, I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed. I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD a