Unable to open my emails, goes to account added?

My 5s iphone will receive emails, but can only access them with sira voice asking for mailbox. Will get a list of emails with about 3 lines of detail. when I tap the email it goed to four links, email, contact, calendar etc. but taping tham does nothing. Also when tapping mail from the home position it also takes you to those four links which do nothing? the mail link is very faint in conparison to other's/

Hello Jwiljon,
Thanks for using Apple Support Communities.
I understand you're not able to open email messages from Mail on your iPhone.  To troubleshoot this issue I'd like you to follow the steps below:
Resolution
Try these basic troubleshooting steps first
Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.Try to use an alternate Internet connection if available:Try a different Wi-Fi connection
If your iOS device has an active cellular data plan, tap Settings > Wi-Fi and turn off Wi-Fi.
If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Take care,
Alex H.

Similar Messages

  • Unable to open certain email messages

    Hi,
    I've configured my gmail account on nokia messaging on my 5800 XM. I get notified on new email and I've been able to get my emails as well.
    But there is this weird problem with certain emails. When I click on the email, it retrieves the message switches to open that email, but immediately switches back to the list of emails. I've tried a lot of times, but this seems to happen consistently for some emails. Is there any reason why I'm unable to open certain emails?
    (I don't really see anything special about these emails that don't open)
    Regards,
    Anand 

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • I am unable to open encrypted emails using webmail and a CAC reader.  It says "content can't be displayed because the S/MIME control isn't available."  I'm using a Macbook Pro with 10.10 OS and have tried both Safari and Chrome.

    I am using a Macbook Pro with OS X Yosemite 10.10.2.  I am unable to open encrypted emails using webmail.  I have verified my certificates are loaded in the keychain for my military common access card while using a CAC reader.  When I try to view the message it gives me the error saying "content can't be displayed because the S/MIME control isn't available." 

    I am using a Macbook Pro with OS X Yosemite 10.10.2.  I am unable to open encrypted emails using webmail.  I have verified my certificates are loaded in the keychain for my military common access card while using a CAC reader.  When I try to view the message it gives me the error saying "content can't be displayed because the S/MIME control isn't available." 

  • Unable to open hotmail emails

    unable to open hotmail emails and delete emails in hotmail website but can log in

    I found this on mozillazine and it worked for me:
    Clear the browser cache (use menu path Tools->Options->Advanced->Network tab->click on "Clear Now" button.)
    Delete any cookies relating to the site(s) involved (Tools->Options->Privacy->Show Cookies button).

  • Unable to open sms, email and bb messenger messeges

    I am having trouble with opening my sms, email and blackberry messenger messeges. I tried to download a blackberry messenger app from app world and then i could no longer open these messages. I can see that I have messeges but unable to open them. When I go into my blackberry messenger, it says that my contacts are nulled. i have tried to reboot my phone several times (both by shutting it off and removing the battery and by simply removing the battery with the phone on).
    does anyone have any idea how to fix this problem??
    i greatly appreciate it!

    Hi and Welcome to the Forums!
    I suggest the following steps (in order):
    1) Register HRT
    Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My husband and I both have email accounts on my iMac using Mavericks. Often we both receive an the same emails. If one of us opens the email on their account it automatically considers the email as read on both accounts. I would like to change this.

    My husband and I both have email accounts on my iMac using Mavericks. Often we receive the same emails. Now when one of us opens an email that has been sent to both of us, Mavericks considers the email as read on both accounts. Mountain Lion did not operate this way. Can I change this? Thanks

    By the sounds of it you have linked Email Accounts, if so this means that you will both recieve the majority of the same Emails, and if you do and you read them on your account (which is linked with your husbands) then they will appear to read on the both of them because they are linked. With the majority of Email providers these days they're Emails are (simplified) in the cloud you could say, meaning that if you read or delete shared Emails then it will do the same on both accounts rather than just the yours.
    I hope all that made sense, sorry that I couldn't be of anymore assistance.. If you havent already try googling your problem - you may find some answers on there

  • Unable to open any applications in administrator account

    My OS is 10.6.2. Just tonight, I was unable to open any applications in my administrator account (Safari, iCal, iTunes, calculator, system preferences, etc.). In other words, I can't do anything while logged into my administrator account. However, everything works fine if I log into the guest account. Any suggestions? I have restarted my computer and that did not help.

    What happens when you try to launch applications? Do you see error messages?
    Check the behavior in Safe Mode by restarting the computer with the Shift key held down. Booting will take a while longer--this is normal, so just be patient.
    ~Lyssa

  • Unable to open /dev/agpgart  - going to command line no GUI

    I have tried both Xorg and Xsun in solaris 10 . Can anyone suggest me how to fix this problem. I am pasting Xsun.0.log here in. I have the same error in Xorg. I have installed patches 118966-15 and 120536-08. Log gives all of my environment info.
    Here it goes:
    (EE) screenInfo.numScreens = 1
    (==) Log file: "/var/log/Xsun.0.log", Time: Tue Mar 21 12:37:31 2000
    (WW) No supplemental Xorg Configuration file exists, use Solaris OWconfig file
    (==) ServerLayout "SimpleLayout"
    (**) |-->Screen "DefaultScreen 1" (0)
    (**) | |-->Monitor "DefaultMonitor"
    (**) | |-->Device "DefaultDevice"
    (WW) No FontPath specified. Using compiled-in default.
    (==) FontPath set to "/usr/openwin/lib/X11/fonts/Type1/,/usr/openwin/lib/X11/fonts/Type1/sun/,/usr/openwin/lib/X11/fonts/F3bitmaps/,/usr/openwin/lib/X11/fonts/Speedo/,/usr/openwin/lib/X11/fonts/misc/,/usr/openwin/lib/X11/fonts/75dpi/,/usr/openwin/lib/X11/fonts/100dpi/,/usr/openwin/lib/X11/fonts/TrueType"
    (==) RgbPath set to "/usr/openwin/lib/X11/rgb"
    (==) ModulePath set to "/usr/openwin/sfw/server//lib/modules"
    (II) Module ABI versions:
         X.Org ANSI C Emulation: 0.2
         X.Org Video Driver: 0.7
         X.Org XInput driver : 0.4
         X.Org Server Extension : 0.2
         X.Org Font Renderer : 0.4
    (II) Loader running on solaris
    (II) LoadModule: "pcidata"
    (II) Loading /usr/openwin/sfw/server//lib/modules/libpcidata.a
    (II) Module pcidata: vendor="X.Org Foundation"
         compiled for 6.8.2, module version = 1.0.0
         ABI class: X.Org Video Driver, version 0.7
    (II) PCI: Probing config type using method 1
    (II) PCI: Config type is 1
    (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,7124 card 0000,0000 rev 03 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 8086,7125 card 0e11,b165 rev 03 class 03,00,00 hdr 00
    (II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01
    (II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80
    (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
    (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00
    (II) PCI: 01:05:0: chip 125d,1988 card 0e11,b19d rev 12 class 04,01,00 hdr 00
    (II) PCI: 01:09:0: chip 1113,1211 card 1113,1211 rev 10 class 02,00,00 hdr 00
    (II) PCI: 01:0a:0: chip 134d,7897 card 134d,0001 rev 02 class 07,03,04 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
         [0] -1     0     0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
         [0] -1     0     0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
         [0] -1     0     0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared)
    (II) Bus 1 I/O range:
         [0] -1     0     0x00001000 - 0x000010ff (0x100) IX[B]
         [1] -1     0     0x00001400 - 0x000014ff (0x100) IX[B]
         [2] -1     0     0x00001800 - 0x000018ff (0x100) IX[B]
         [3] -1     0     0x00001c00 - 0x00001cff (0x100) IX[B]
    (II) Bus 1 non-prefetchable memory range:
         [0] -1     0     0x40000000 - 0x400fffff (0x100000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(0:1:0) Intel Corp. 82810E DC-133 CGC [Chipset Graphics Controller] rev 3, Mem @ 0x44000000/26, 0x40100000/19
    (II) Addressable bus resource ranges are
         [0] -1     0     0x00000000 - 0xffffffff (0x0) MX[B]
         [1] -1     0     0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
         [0] -1     0     0xffe00000 - 0xffffffff (0x200000) MX(B)
         [1] -1     0     0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
         [2] -1     0     0x000f0000 - 0x000fffff (0x10000) MX[B]
         [3] -1     0     0x000c0000 - 0x000effff (0x30000) MX[B]
         [4] -1     0     0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [5] -1     0     0x0000ffff - 0x0000ffff (0x1) IX[B]
         [6] -1     0     0x00000000 - 0x000000ff (0x100) IX[B]
    (II) Active PCI resource ranges:
         [0] -1     0     0x40000000 - 0x7fffffff (0x40000000) MX[B]E
         [1] -1     0     0x40100000 - 0x4017ffff (0x80000) MX[B](B)
         [2] -1     0     0x44000000 - 0x47ffffff (0x4000000) MX[B](B)
         [3] -1     0     0x00001800 - 0x000018ff (0x100) IX[B]E
         [4] -1     0     0x00001400 - 0x000014ff (0x100) IX[B]E
         [5] -1     0     0x00001000 - 0x000010ff (0x100) IX[B]E
         [6] -1     0     0x0000eee0 - 0x0000eeff (0x20) IX[B]E
         [7] -1     0     0x0000eec0 - 0x0000eeff (0x40) IX[B]E
         [8] -1     0     0x00002020 - 0x0000203f (0x20) IX[B]E
    (II) PCI Memory resource overlap reduced 0x40000000 from 0x7fffffff to 0x400fffff
    (II) PCI I/O resource overlap reduced 0x0000eec0 from 0x0000eeff to 0x0000eedf
    (II) Active PCI resource ranges after removing overlaps:
         [0] -1     0     0x40000000 - 0x400fffff (0x100000) MX[B]E
         [1] -1     0     0x40100000 - 0x4017ffff (0x80000) MX[B](B)
         [2] -1     0     0x44000000 - 0x47ffffff (0x4000000) MX[B](B)
         [3] -1     0     0x00001800 - 0x000018ff (0x100) IX[B]E
         [4] -1     0     0x00001400 - 0x000014ff (0x100) IX[B]E
         [5] -1     0     0x00001000 - 0x000010ff (0x100) IX[B]E
         [6] -1     0     0x0000eee0 - 0x0000eeff (0x20) IX[B]E
         [7] -1     0     0x0000eec0 - 0x0000eedf (0x20) IX[B]E
         [8] -1     0     0x00002020 - 0x0000203f (0x20) IX[B]E
    (II) OS-reported resource ranges after removing overlaps with PCI:
         [0] -1     0     0xffe00000 - 0xffffffff (0x200000) MX[B](B)
         [1] -1     0     0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
         [2] -1     0     0x000f0000 - 0x000fffff (0x10000) MX[B]
         [3] -1     0     0x000c0000 - 0x000effff (0x30000) MX[B]
         [4] -1     0     0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [5] -1     0     0x0000ffff - 0x0000ffff (0x1) IX[B]
         [6] -1     0     0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
         [0] -1     0     0xffe00000 - 0xffffffff (0x200000) MX[B](B)
         [1] -1     0     0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
         [2] -1     0     0x000f0000 - 0x000fffff (0x10000) MX[B]
         [3] -1     0     0x000c0000 - 0x000effff (0x30000) MX[B]
         [4] -1     0     0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [5] -1     0     0x40000000 - 0x400fffff (0x100000) MX[B]E
         [6] -1     0     0x40100000 - 0x4017ffff (0x80000) MX[B](B)
         [7] -1     0     0x44000000 - 0x47ffffff (0x4000000) MX[B](B)
         [8] -1     0     0x0000ffff - 0x0000ffff (0x1) IX[B]
         [9] -1     0     0x00000000 - 0x000000ff (0x100) IX[B]
         [10] -1     0     0x00001800 - 0x000018ff (0x100) IX[B]E
         [11] -1     0     0x00001400 - 0x000014ff (0x100) IX[B]E
         [12] -1     0     0x00001000 - 0x000010ff (0x100) IX[B]E
         [13] -1     0     0x0000eee0 - 0x0000eeff (0x20) IX[B]E
         [14] -1     0     0x0000eec0 - 0x0000eedf (0x20) IX[B]E
         [15] -1     0     0x00002020 - 0x0000203f (0x20) IX[B]E
    (II) LoadModule: "i810"
    (II) Loading /usr/openwin/sfw/server//lib/modules/drivers/i810_drv.o
    (II) Module i810: vendor="X.Org Foundation"
         compiled for 6.8.2, module version = 1.3.0
         Module class: X.Org Video Driver
         ABI class: X.Org Video Driver, version 0.7
    (II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
         i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, 915GM
    (II) Primary Device is: PCI 00:01:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset i810e found
    (II) resource ranges after xf86ClaimFixedResources() call:
         [0] -1     0     0xffe00000 - 0xffffffff (0x200000) MX[B](B)
         [1] -1     0     0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
         [2] -1     0     0x000f0000 - 0x000fffff (0x10000) MX[B]
         [3] -1     0     0x000c0000 - 0x000effff (0x30000) MX[B]
         [4] -1     0     0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [5] -1     0     0x40000000 - 0x400fffff (0x100000) MX[B]E
         [6] -1     0     0x40100000 - 0x4017ffff (0x80000) MX[B](B)
         [7] -1     0     0x44000000 - 0x47ffffff (0x4000000) MX[B](B)
         [8] -1     0     0x0000ffff - 0x0000ffff (0x1) IX[B]
         [9] -1     0     0x00000000 - 0x000000ff (0x100) IX[B]
         [10] -1     0     0x00001800 - 0x000018ff (0x100) IX[B]E
         [11] -1     0     0x00001400 - 0x000014ff (0x100) IX[B]E
         [12] -1     0     0x00001000 - 0x000010ff (0x100) IX[B]E
         [13] -1     0     0x0000eee0 - 0x0000eeff (0x20) IX[B]E
         [14] -1     0     0x0000eec0 - 0x0000eedf (0x20) IX[B]E
         [15] -1     0     0x00002020 - 0x0000203f (0x20) IX[B]E
    (II) resource ranges after probing:
         [0] -1     0     0xffe00000 - 0xffffffff (0x200000) MX[B](B)
         [1] -1     0     0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
         [2] -1     0     0x000f0000 - 0x000fffff (0x10000) MX[B]
         [3] -1     0     0x000c0000 - 0x000effff (0x30000) MX[B]
         [4] -1     0     0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [5] -1     0     0x40000000 - 0x400fffff (0x100000) MX[B]E
         [6] -1     0     0x40100000 - 0x4017ffff (0x80000) MX[B](B)
         [7] -1     0     0x44000000 - 0x47ffffff (0x4000000) MX[B](B)
         [8] 0     0     0x000a0000 - 0x000affff (0x10000) MS[B]
         [9] 0     0     0x000b0000 - 0x000b7fff (0x8000) MS[B]
         [10] 0     0     0x000b8000 - 0x000bffff (0x8000) MS[B]
         [11] -1     0     0x0000ffff - 0x0000ffff (0x1) IX[B]
         [12] -1     0     0x00000000 - 0x000000ff (0x100) IX[B]
         [13] -1     0     0x00001800 - 0x000018ff (0x100) IX[B]E
         [14] -1     0     0x00001400 - 0x000014ff (0x100) IX[B]E
         [15] -1     0     0x00001000 - 0x000010ff (0x100) IX[B]E
         [16] -1     0     0x0000eee0 - 0x0000eeff (0x20) IX[B]E
         [17] -1     0     0x0000eec0 - 0x0000eedf (0x20) IX[B]E
         [18] -1     0     0x00002020 - 0x0000203f (0x20) IX[B]E
         [19] 0     0     0x000003b0 - 0x000003bb (0xc) IS[B]
         [20] 0     0     0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/openwin/sfw/server//lib/modules/libvgahw.a
    (II) Module vgahw: vendor="X.Org Foundation"
         compiled for 6.8.2, module version = 0.1.0
         ABI class: X.Org Video Driver, version 0.7
    (**) I810(0): Depth 8, (--) framebuffer bpp 8
    (==) I810(0): Default visual is PseudoColor
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/openwin/sfw/server//lib/modules/libxaa.a
    (II) Module xaa: vendor="X.Org Foundation"
         compiled for 6.8.2, module version = 1.2.0
         ABI class: X.Org Video Driver, version 0.7
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/openwin/sfw/server//lib/modules/libvbe.a
    (II) Module vbe: vendor="X.Org Foundation"
         compiled for 6.8.2, module version = 1.1.0
         ABI class: X.Org Video Driver, version 0.7
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/openwin/sfw/server//lib/modules/libint10.a
    (II) Module int10: vendor="X.Org Foundation"
         compiled for 6.8.2, module version = 1.0.0
         ABI class: X.Org Video Driver, version 0.7
    (II) I810(0): initializing int10
    (II) I810(0): Primary V_BIOS segment is: 0xc000
    (II) I810(0): VESA BIOS detected
    (II) I810(0): VESA VBE Version 3.0
    (II) I810(0): VESA VBE Total Mem: 1024 kB
    (II) I810(0): VESA VBE OEM: Intel(R) 8xx Chipset Video BIOS
    (II) I810(0): VESA VBE OEM Software Rev: 33.118
    (II) I810(0): VESA VBE OEM Vendor: Intel Corporation
    (II) I810(0): VESA VBE OEM Product: Intel(R) 8xx Chipset
    (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/openwin/sfw/server//lib/modules/libddc.a
    (II) Module ddc: vendor="X.Org Foundation"
         compiled for 6.8.2, module version = 1.0.0
         ABI class: X.Org Video Driver, version 0.7
    (II) I810(0): VESA VBE DDC supported
    (II) I810(0): VESA VBE DDC Level 2
    (II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
    (II) I810(0): VESA VBE DDC read successfully
    (II) I810(0): Manufacturer: CPQ Model: 3053 Serial#: 1110784050
    (II) I810(0): Year: 2001 Week: 8
    (II) I810(0): EDID Version: 1.2
    (II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    (II) I810(0): Sync: Separate
    (II) I810(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
    (II) I810(0): Gamma: 2.26
    (II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    (II) I810(0): redX: 0.635 redY: 0.323 greenX: 0.283 greenY: 0.593
    (II) I810(0): blueX: 0.146 blueY: 0.069 whiteX: 0.281 whiteY: 0.311
    (II) I810(0): Supported VESA Video Modes:
    (II) I810(0): 720x400@70Hz
    (II) I810(0): 640x480@60Hz
    (II) I810(0): 800x600@60Hz
    (II) I810(0): 800x600@75Hz
    (II) I810(0): 1024x768@60Hz
    (II) I810(0): 1024x768@75Hz
    (II) I810(0): Manufacturer's mask: 0
    (II) I810(0): Supported Future Video Modes:
    (II) I810(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
    (II) I810(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
    (II) I810(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
    (II) I810(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) I810(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) I810(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
    (II) I810(0): Monitor name: COMPAQ FS740
    (--) I810(0): Chipset: "i810e"
    (--) I810(0): Linear framebuffer at 0x44000000
    (--) I810(0): IO registers at addr 0x40100000
    (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
    (EE) I810(0): AGP GART support is not available. Make sure your kernel has
         agpgart support or that the agpgart kernel module is loaded.
    (EE) PreInit done
    (EE) Screen(s) found, but none have a usable configuration.
    And finally GUI test will stop and i have to restart by doing power off. Your suggestion is appreciated.

    frits hoogland wrote:
    I am not sure if mdadm --remove /dev/md0
    [root@rac-1 ~]# mdadm --remove /dev/md0
    [root@rac-1 ~]# mdadm --query /dev/md0
    /dev/md0: is an md device which is not active
    /dev/md0: No md super block found, not an md component.
    [root@rac-1 ~]#
    would work, try it to see if the device gets removed that way, otherwise remove it the blunt way:
    rm -rf /dev/md0
    [root@rac-1 ~]# rm -rf /dev/md0
    [root@rac-1 ~]# mdadm --query /dev/md0
    mdadm: cannot open /dev/md0: No such file or directory
    [root@rac-1 ~]#
    then it shouldn't give anymore troubles.
    [root@rac-1 ~]# parted -l
    Model: ATA SAMSUNG HD080HJ (scsi)
    Disk /dev/sda: 80.0GB
    Sector size (logical/physical): 512B/512B
    Partition Table: msdos
    Number  Start   End     Size    Type      File system  Flags
    1      32.3kB  32.2GB  32.2GB  primary   ntfs         boot
    2      32.2GB  80.0GB  47.8GB  extended               lba 
    5      32.2GB  64.7GB  32.5GB  logical   ntfs             
    6      64.7GB  64.8GB  107MB   logical   ext3             
    7      64.8GB  80.0GB  15.2GB  logical   ntfs             
    Model: ATA ST3160815AS (scsi)
    Disk /dev/sdb: 160GB
    Sector size (logical/physical): 512B/512B
    Partition Table: msdos
    Number  Start   End     Size    Type      File system  Flags
    1      32.3kB  43.0GB  43.0GB  primary   ext3         boot
    2      43.0GB  47.2GB  4294MB  primary   linux-swap       
    3      47.2GB  160GB   113GB   extended               lba 
    5      47.2GB  52.6GB  5371MB  logical                    
    6      52.6GB  58.0GB  5371MB  logical                    
    [root@rac-1 ~]# looks it worked.may i know why the other than rm did not work?

  • Unable to open gmail email attachments on iPad3

    I recently bought the new iPad. I configured gmail on iPad, however I am unable to open email attachments. Despite clicking on the attachments, the grey dashes around the attachments dont change & subsequently the am unable to view the attachments.
    I have already reset the iPad a few time which included erasing all content & restoring it completely
    Need some help to figure this one out.

    What you're experiencing is one major issue raised by iPad users.  Yes, you are far better using the Gmail App than the native Gmail on iPad.  Even with the native, if you switch to desktop view, you'll have the same issue.
    My issue has been, in the native version, can't attach anything without issues.  Using the Gmail App, I'm able to attach, but only pictures.  It doesn't allow me to open other subfiles to attached pics in other files or PDF, Word,Excell,etc which I create using QuickOffice Pro.
    I've tried this on various Android Tablets, and not a single issue with them. You can attach anything.  So, it's definately an Apple device thing.
    I'll even go further. If using Facebook on an iPad 3, you can post, but cannot delete a post you make whether in desktop view, native FB on iPad or the FB App itself.  Yet, on my Droid Razr phone, I can by simply swyping sideways, a black X appears and I delete the post.
    It's these quirks, that is leading me to consider selling my iPad 3, and just stick with my 13" MacBook Pro.

  • Unable to open my email messages on Firefox? How do I fix this?

    I am not able to read my emails while I am in Firefox. This has happened about 8 days ago. I don't recall how this happened because I was able to use FF very well & never had any problems. I have been using Internet Explorer because most of my work has to be done on IE, the problem is that IE crashes too many times and its become very slow, I am just sick of it. I decided to use FF to read my emails & to do my PCH sweepstakes and play some games and maybe I would not get the screen crashing effect that I'm getting on IE. However, in order to get to do this I must open my email messages to proceed with the sweepstakes, but for some reason when I click on my messages nothing happens, they don't open up. How can this be repaird? I have even gone as far as deleting FF and re-downloading it again, but the problem still persists. I need help please!
    I made a copy of my email screen to place in the box below, but it is not allowing me to paste? I tried clicking on install but all I got was an error message that it could not open up this document because it needs to know the creator. I've tried to open with different programs but it just won't work. Can anyone please give me some assistance?

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • I am unable to open some emails from an exchange server.

    Since I updated to iOS7 I have been unable to download most emails from a work exchange server. In most cases it appears to be downloading the message yet nothig appears after a lenghty wait.

    A reset of the device is a good first step:
    Hold the home button + the lock button for about 10-12 seconds until the Apple logo appears.  You will not lose any data or current settings.
    If you have already done this and it didn't resolve the issue, try remove the email accound and then re-add it.

  • I am unable to open my emails using firefox, I get message page not found 404

    I am having problems opening my emails, a page with 404 not found with the following message 'The requested URL /dc/launch was not found on this server.
    Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny9 with Suhosin-Patch Server at uk.mg.bt.mail.yahoo.com Port 80'
    I have found a way to access my emails by changing my running program eg internet explorer or google. But I don't understand why this has happened, it only affects my emails when I use firefox

    The updater may not have been able to update all the files and some were left as older versions.<br />
    You need to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • I am unable to open any emails or any folders (aside from my inbox) in Hotmail when using Firefox. What do I do?

    Starting about mid-day yesterday, when I sign into Hotmail using Firefox, I can get to my inbox but I can't open any emails or go to any other folders. This is only when using Firefox - Internet Explorer works perfectly fine. My Firefox updated itself a couple of days ago and was working fine until yesterday at about 4:30 - 5:00.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Why am I now unable to open my emails

    Until about a week ago I was able to open my emails, but as of then I cannot do so. Would appreciate any input to rectify the situation.

    Can you expound a little about what that means?
    Is the Preview pane missing?
    If not, if you click on the email in the list, does anything show up in the preview pane?
    Can you double-click an email and does it open in a separate window?

  • I'm unable to open my email how do I fix the problem

    I get this message when I attempt to open my email: "There appears to be a problem loading the email."
    How do I fix the problem?

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    '''Note:''' This will temporarily log you out of all sites you're logged in to. To clear cache and cookies do the following:
    *Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    *Under "Time range to clear", select "Everything".
    *Now, click the arrow next to Details to toggle the Details list active.
    *From the details list, check Cache and Cookies and uncheck everything else.
    *Now click the Clear now button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Also see:
    [[Problems with email and how to find help]]
    Moreover, try Reset feature
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. Note: This will cause you to lose any Extensions, Open websites, and some Preferences.
    To Reset Firefox do the following:
    * Go to Firefox > Help > Troubleshooting Information.
    * Click the "Reset Firefox" button.
    * Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    * Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.

Maybe you are looking for