Unable to Open My Root Folder in Files View

Even though I was working with these files just fine
yesterday, I am now unable to pull up my chosen root folder in the
files panel. Apparently it's not defined as a site. Is there
anything I can do about it? Thanks ahead of time for any help y'all
might have to offer!

SITE | New Site > Follow the bouncing ball (so to
speak)....
Just point the Local Root folder to the correct spot on your
drive.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dreamer spiderwoman1" <[email protected]>
wrote in message
news:g90opc$cfb$[email protected]..
> Thanks for your helpful reply! Can you tell me how to
create a new site
> and point to my chosen root folder?
>
> Kate McNamara
> Rookie (Only been at it 10 days)

Similar Messages

Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III files. SNo support or upgrade availab

Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III files. SNo support or upgrade available on the site but 6.7 upgrade.!Please advise

http://labs.adobe.com/technologies/cameraraw7-1/

I am unable to open scanned documents (with .jpg file extension) in my e-mail inbox, on the Mail app on my iPad. Please provide a clear answer. Thanks a lot.

I am unable to open scanned documents (with .jpg file extension) in my e-mail inbox, on the Mail app on my iPad. Please provide a clear answer. Thanks a lot.

Can you actually see that the attachment has a .jpg extension? Some mail systems strip it off (I've seen AOL do that) which makes the attachment difficult to open.

I am unable to open attachments (Word Documents, Excel file, Adobe) from my Gmail with Firefox.

I am unable to open attachments (Word Documents, Excel file, Adobe) from my Gmail with Firefox. My computer freezes when I try to open the (email attachment) file. Task Manager says "not responding".
You can respond to [email protected]

You may first want to look into Safari's "Installed Plugins" section within the browser. This is (usually) found under the Safari Help header in the top of a browser. I say usually, because I don't use Safari often and mine is an older version. They handle applications and plugins like most others, to a point.
I see in Safari Installed Plugins that mine would use
application/pdf
Acrobat Portable Document Format
Acrobat Reader & reader plugin v9.5.5 for web browsers
(in Safari 5.x, where I looked into this)
While I use FireFox, SeaMonkey (Mozilla) and others, where I can choose in preferences the helper applications to open from the browser, Safari has different methods; so if you can change this in the preferences or settings of Safari in a later version I am not certain.
You could see what the defaults are by using Safari help menu to open the Installed plugins, and maybe find out what happend to Adobe reader plugin. Could be it was 'sandboxed' in a later OS X and needs to be installed differently to be accepted as safe.
It is easier to set how a file type is handled once it is inside the computer and not held in the browser; by file type in general or specific to each single document. I do both, and seldom let an a browser do these things due to security considerations. I download and open them, only then if I feel they are safe.
Sorry to not have a specific answer for that anomaly.
Good luck & happy computing!

UNABLE TO OPEN FCP 6.02 PROJECT FILES AFTER INSTALLING LEOPARD!

**Unable to open FCP 6.02 project files after installing Leopard**. Tested and found that the files can be opened on another computer with OS 10.4.10, but not OS 10.5. Spoke to apple support many times, and have tried reinstalling FCP, but it didn't work.
Apple is now saying to erase my HD and reinstall from scratch. This presents a problem since i have software installed but no disc due to a move, (they are deep in offsite storage).
Anyone have this problem? Anyone know a fix?

Lynne,
There is a section in the manual on the migration tool... I don't have my machine fired up right now so can't direct you to the exact page. I think a search for migration or migrate should do it.
Two other things to try:
1. There have been numerous reports that Quicktime 7.3 is what is killing older projects. According to one of the third party program makers Apple re-wrote Quicktime changing the null value to Zero from minus-one. I'm not a code junkie so can't vouch for this but the upshot would be, go back to Quicktime 7.1 or 7.2 not 7.3
2. There is a Quicktime plugin called "Perian". For lots of people it has caused numerous problems.
Look for Perian on your machine and if you find it, drag the app to the trash... re boot and try again.
Of course the ultimate solution would be to reinstall Tiger, Final Cut Studio 2 and Quicktime 7.2. So far the most stable combined setup for me and lots of others on G5 machines.
36 degrees and thunderstorms with sleet here this afternoon. The door on my storage unit is staying closed.
Message was edited by: John Criswell

Unable to open iTunes music folder on NAS after 10.5.6 update

I just updated my system to 10.5.6 and am now unable to open my iTunes music folder on my Sans Digital MN2L NAS. I can connect to the device and open every other folder but not the music folder. When I try to open the folder the finder window shows the spinning whatever in the bottom right corner for about 10 seconds and then restarts. This occurs when I connect using Bonjour and SMB. I can open the folder in question through my windows laptop without problem. There are approximately 1200 subfolders contained within the Music folder. My iMac and NAS are both connected through the same gigabit switch via CAT 5e.

I just found a post on another board that appears to have solved my problem. The issue wasn't really with the NAS but rather with a file that the finder left in the Music folder in the NAS.
The following is an excerpt from the post I found:
DS_STORE files might very well have been the culprit. I was given the advice and link to the
following:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_16831&sliceId=2
Now I've only just resolved it however I have accessed folders which previsouly always resulted in a
crash. Some other links I was sent:
http://discussions.apple.com/thread.jspa?messageID=4553291&#4553291
For removing .DS_store see
http://discussions.apple.com/thread.jspa?messageID=4643556&#4643556

Unable to open the document when combining files.

We have a user that gets an error when combining files. It says
Unable to open the document:
<Filename and path>
Please check to see if you have read permission for the above file.
Retry and cancel buttons.
We get this error on every subsequent file, it works on the first one after the computer starts.
This computer has Windows Vista Business with SP2, Adobe Acrobat X with the latest patches.
It doesn't matter if the files are local or on a network drive, the same always occurs. I have cleared
all user and system temporary files, re-installed, verified the Acrobat Add-In for Word 2010 is active,
verifed the PDF printer is working fine. It only happens when trying to combine files. I have given the
user local administrator privilidges, tried with my account that has domain admin priviledges, no luck.
I really need some suggestions...
Thanks,
Tom

I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed.
This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok.
They said an update to correct this issue will be coming within the next quarter.
TP

Unable to open scanned Kaiser Baas jpeg files in Photoshop Elements 6

I have scanned photos and negatives using Kaiser Baas Photo & Negative scanner. I am unable to open the jpeg files produced using Photoshop Elements 6, any advice on how to?

I don't seem to have any trouble opening the file in pse 6 on windows xp.
I'd reset the pse 6 editor preferences and see if that makes a difference.
Press and hold Shift+Ctrl+Alt just after starting the launch of the pse 6 editor
Keeping holding down the keys until you get a dialog asking if you want to delete the photoshop elements settings file
Press Yes in that dialog

Can someone help? I am unable to open MS Word 2011 .docx files after installing LION OS.

I recently had a hard drive failure on my iMac. A new 1TB hard drive was installed along with OS X 10.6.8. Since restoring files from Time Machine, I am unable to open .docx files using MS Word 2011. I receive a 'convert file' dialog box. I can open .doc files that were restored from Time Machine and any new files in .docx format. I cannot open any .docx files restored from Time Machine. Has anyone else ran into this problem and do you have a workaround or solution?
thanks.

Might look into NeoOffice...
http://www.neooffice.org/
Or Open Office...
http://www.openoffice.org/download/index.html
There are older versions for 10.4.11 available...
http://www.neooffice.org/neojava/en/download.php#download
http://download.openoffice.org/other.html

Trouble with with CS4 "open with" and FOLDER OPTIONS FILE TYPES

I just installed CS4 MC and when I right click to use "OPEN WITH" CS4 is not listed. I use BROWSE and point to photoshop.exe in which is in the adobe/adobe photoshop cs4 folder as it should be. I click the .exe file then click OK and it takes me back to the OPEN WITH dialog box, but nothing has changed. There is no icon for Photoshop. It acts as if it didn't do anything. Same thing happens when I try to use FOLDER OPTIONS > FILE TYPES to change a file so that PS will open it. All was well with CS4. When I installed I did not use disk 5 (Windows Components) DVD to install. Once disk 4 was done and it said photoshop was installed, I stopped. What does disk 5 contain and is that the probably cause of why I can't use OPEN WITH? I am on XP with SP3. Photoshop works fine and I have no issues opening files thru photoshop, or from bridge into photoshop. Thanks in advance for any help.

BedtymeBear wrote:
I think that this is similar to something I've ran into before with Dreamweaver after I installed an upgrade. It seems to be some kind of limitation in Windows, actually, that causes the problem. Basically, you can only have one application per file name registered for the Open With in Windows.
There are two options for you, I believe:
1. Rename the "photoshop.exe" file in Program Files\Adobe\Adobe Photoshop CS4 to something else, like "ps.exe", then use the Open With > Browse option to select the newly-renamed file.
2. Delete the "photoshop.exe" key in the Windows Registry. Don't delete just any key, the specific one (and only) key that you should delete, if you go this route, is in HKEY_CLASSES_ROOT\Applications. Then use Open With to set up the association.
HTH
You can have only 1 defalult "Open With" but you can have many options of Open With.
Not a computer geek but seems like you options 1 and 2 are risky. Would get a second opinion.

Unable to open Canon 7D CR2 raw files in Photoshop CS6

Hi Folks,
I have been trying to open Canon 7D CR2 raw files in Photoshop CS6 (Extended) (Windows 8.1) but I'm always getting the error "Could not complete your request because the file format module cannot parse your file".
I installed the Camera Raw plugin ver 8.8.0.397 today. Did this initially by downloading and running the CameraRaw_8_8.zip available here Camera Raw plug-in installer. Still got the error.
Went and did the Check Updates in Photoshop and updated the Camera Raw (and other components) but STILL cannot open the CR2 files.
I can see the thumbnails in Bridge but when I double click to open them in Photoshop, same error.
Cannot seem to get past the "Could not complete your request..." error.
Any ideas?
Cheers,
Doug...

Hi Folks,
Thanks for your replies and assistance so far, very much appreciated. Its a very frustrating problem... this should be one of those things that just work.
I have uploaded two sample pics taken with my canon 7d. If you get a chance, could you please try opening these images to see if they work on your machine.
http://www.bespoke-gems.com/images/gemstones/misc/rawtest1_canon7d.cr2
http://www.bespoke-gems.com/images/gemstones/misc/rawtest2_canon7d.cr2
I have tried opening them on both my office and home computer but neither of them work.
Hmmm... could it have anything to do with the lens (Canon Macro Lens EF 100mm1:2.8 USM)
Many thanks!

Unable to open 5D Mark II Raw files in CS4 [was: raw photos]

unable to open raw photos from canon eos 5d mark II on photoshop cs4

Photoshop CS4 supports Adobe Camera Raw 5.0 to 5.7.
What is the current version of Camera Raw Plugin installed on machine?
it should be 5.2 and later because Canon 5D Mark II start supported since relase of Camera Raw 5.2.
For more info please refer following article:
Camera Raw plug-in | Supported cameras
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw-compatible Adobe applications
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

Applicationundertest.launch unable to open my downloads folder path

Hi, I wanted to run a automation script in c# to open downloads folder (C:\Users\test\Downloads) and run
vs_ultimate.exe file.
I am using
ApplicationUnderTest.Launch(@"C:\Users\test\Downloads");
under TestInitialize() but giving me error
Microsoft.VisualStudio.TestTools.UITest.Extension.FailedToLaunchApplicationException: "The application cannot be started because it cannot be found in the specified location, or the user does not have sufficient permissions to start the application."
File: C:\Users\test\Downloads..
but when I open the path manually I am able to access download folder. I am admin for my system as well.
I use
ApplicationUnderTest.Launch(@"C:\Windows\System32\calc.exe");
and able to access.
please suggest me a solution on this.

Hi, I passed ApplicationUnderTest.Launch(@"C:\Users\test\Downloads\vs_ultimate.exe");
giving me a different scenario which is not as expected as shown in fig1. I wanted to open a window like shown below and double click on exe file which gives me run and cancel button in fig2.
I wanted to send you screenshots of this but unable to post..giving me error body text cannot contain images or links until we are verifying your account.

Unable to open some Powerpoint 2010 PPTX files which were emailed to me

A presentation created by a colleague was emailed to me via Outlook 2010. After saving the file (save attachments) in a folder, I cannot open the PPTx file. I get the following error ina dialogue box:
     Powerpoint found a problem with content in XXX.ppt.
     Powerpoint can attempt to repair the presentation.
     If you trust the source this presentation, click Repair.
When I click on 'Repair', I get another dialogue box which says:
   This error can be caused by following conditions:
    ---- none of which are applicable to my system. Can somebody help me with this problem?

Hi there. I had a similar issue. How I was able to resolve this was by doing the following. You will need Office 2003 (with compatibility pack) and Office 2010.
1. Open the Powerpoint presentation in Powerpoint 2003.
2. Once you have the presentation opened in Powerpoint 2003, save it as a Powerpoint 2007 presentation.
3. Open the presentation using Powerpoint 2010. You may get some error prompts (you can ignore). Click on save as, and save it as a Powerpoint 2010 presentation. Close it.
4. Now open it again using Powerpoint 2010, you should be able to work on it without any issues.
Not the most elegant solution but it worked for me. I hope this helps.

Unable to open AutoCAD dwg in 2010 file format with Illustrator 15/CS 5

Hello,
We are trying to open some dwg's with illustrator that are saved in the 2010 file format. We get an error "The file "XXXXX.dwg" is an unknown format and cannot be opened.", if we save the same file down to the 2007 format it opens as expected. Try to understand if that format just does not work with Illustrator 15 or if there is a template setting we did or what as it is all dwg's in that file format and as I said same file saved a format down works fine. The issue with tis solution is most of our illustrator users dont' have AutoCAD so this is creating a bottle neck.
Thanks,
Tyler

This is a workaround, but the Dassault Systems ( the company that sells SolidWorks and Catia ) has a free CAD program called DraftSight that will open a
2010 DWG file. You could then do a SaveAs to an earilier DWG format that AI can work with. They have free versions for both Windows and Mac.
http://www.3ds.com/products/draftsight/download-draftsight/
I use the Windows version, and it works pretty good - but my background is more CAD than AI.
Good Luck

Unable to Open My Root Folder in Files View

Similar Messages

Maybe you are looking for