Unable to open Notes

I mentioned this in a similar thread in the iPhone 3Gs forum, but I have an iPhone 3G, so I figured I should post it here too. I am unable to access Notes: the app opens, displays a blank note for a few seconds, then crashes back to the main screen.
The problem occurred a couple of days ago, soon after creating a new note - the first new note since I installed the 3.0.1 update. I'd had no trouble with Notes prior to this.
I've tried restarting the iPhone, both normally and via hard reset; I've also Restored the phone via iTunes and then from my last backup. I'm still experiencing the same issue.
Anyone else seen this? I have some Notes I'd be pretty sad to lose, since I gave up carrying a notepad and pencil when I discovered how handy Notes was.

I have this problem since a week ago and cannot find out any solution for it. Can anyone help on this?

Similar Messages

"Unable to open, Not a keynote valide file"

Hi all,
Composing a slide show with occasional switches (import export) to ppt.
I have a recurrent bug on re-opening a keynote file.
I am working on a keynote presentation, saves it OK. At some point, it comes from powerpoint, and also I cut/paste graphics from an original Illustrator .ai file. The following problem occured to me 3 or 4 times, and I cannot diagnose if it comes from working with the ppt imported file (all seems to work fine after my initial ppt import), or after my adobe illustrator cut and paste. Cannot reproduce the bug on purpose, but it is recurrent.
The bug:
When I quit keynote and try to open again my .key file (worked fine up saving and so up to this time...):
I have the failure window (approx translation from French):
" Impossible to ope file XXX because it is not a valid keynote document ".
Any hint to a reported keynote I/O problem ?
Running crazy...
Thanx

Are you double clicking on a Zip file when you get this message? If so, you need to set your file associations so that the proper application opens them.
Here's how (for Windows): Zip files open the wrong program (Windows 8, Windows 7, or Windows Vista) - WinZip Computing :: Knowledgebase

My apple id is not working in imessage or facetime. I tried to rest password still unable to open any. Though i can download stuff from istore.Only facetime and imessage not working. Please suggest.

I am using Ipad3 and OS is upgraded. I tried to reset password still unable to open imessage and facetime. I am able to download from istore though. Tried everything i knew. Please suggest!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Hi. My new computer had Acrobat on it. Suddenly, I was unable to open any PDF's. and then I tried to update and was forwarded to the Adobe site that said I had to buy a monthly subscription. I do not have the physical box with a serial number and was

Hi. My new computer had Acrobat on it. Suddenly, I was unable to open any PDF's. and then I tried to update and was forwarded to the Adobe site that said I had to buy a monthly subscription. I do not have the physical box with a serial number and was going to buy the one advertised on the website until I discovered it's only for students and teachers, which I am not. What should I do next as I need to use PDFs on a daily basis. Thanks! I would like to be able to download this and pay online. Possible? I currently have Adobe Acrobat XI Pro. I have a Windows 7 system. Please help!

As long as you know your serial number you can download PSE from here:
Download Photoshop Elements products | 11, 10
If you don't know your serial number:
Find your serial number quickly

Server 08 R2 DC - unable to open ADUC, netlogon does not start

Hello everyone, and thank you in advance for any possible support.
Note: All identifying server/domain names have been replaced with "CORP" "Sub" and "Sibling" where appropriate. Our forest consists of 3 domains - two which are 'siblings' at the top, CORP and Sibling, (corp being
the primarily used one), and one which is a 'child' of Corp (Sub).
Today we identified that on one of my domain controllers (named for this post, CORP-DC6) we are unable to open ADUC. This is only one of our 8 DC's, and it does not hold any FSMO roles; the only two important pieces on this server is that it's where we manage
our OCS from (we use ADUC on this system to enable a user for OCS, create SIP addresses, etc) and that Certification Authority is installed on the system.
Attempting to open ADUC gives error "Naming information cannot be located because: The target principal name is incorrect."
Web searches for this prompted me to check DNS for issues. In looking into DNS, I found that the system was somehow assigned a different IP address than it should have (it was now at 192.168.1.124 instead of 192.168.1.290 where it should have been).
I moved the IP address back to the correct IP, and rebooted.
The issue was still there, so I continued searching; which lead me to a suggestion to check out my netlogon service. I found that the Netlogon service was NOT running. When attempting to start the service, it fails and I am presented wih the
following error in the System event log:
Log Name: System
Source: Service Control Manager
Date: 7/24/2013 10:54:59 AM
Event ID: 7023
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
The Netlogon service terminated with the following error:
%%-1073741724
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7023</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:54:59.175664400Z" />
<EventRecordID>850085</EventRecordID>
<Correlation />
<Execution ProcessID="496" ThreadID="584" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.om</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Netlogon</Data>
<Data Name="param2">%%-1073741724</Data>
</EventData>
</Event>
Additionally, there is also this error:
Log Name: System
Source: NETLOGON
Date: 7/24/2013 10:54:59 AM
Event ID: 5602
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
An internal error occurred while accessing the computer's local or network security database.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="NETLOGON" />
<EventID Qualifiers="0">5602</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:54:59.000000000Z" />
<EventRecordID>850083</EventRecordID>
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security />
</System>
<EventData>
<Data>%%1317</Data>
<Binary>640000C0</Binary>
</EventData>
</Event>
At this point, I've read a bunch of stuff online and not really found anything that has helped nor seemed completely relevant.
Additional Info that may help out:
When I open Server Manager, it seems to think the local system's name is WIN-3OL3DIFK4S instead of CORP-DC6; similarly opening Device Manager from w/in Server manger gives a message about managing a remote system; even though I am managing the local system.
There are additional errors in the System and Application log which are certainly issues, but I do not know if they pertain to the main issue at hand here or not.
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 7/24/2013 10:55:04 AM
Event ID: 1055
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1055</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:04.448473700Z" />
<EventRecordID>850088</EventRecordID>
<Correlation ActivityID="{582C2637-5A99-47AE-B50C-C1A063DDABDC}" />
<Execution ProcessID="888" ThreadID="1056" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">1632</Data>
<Data Name="ProcessingMode">1</Data>
<Data Name="ProcessingTimeInMilliseconds">11762</Data>
<Data Name="ErrorCode">5</Data>
<Data Name="ErrorDescription">Access is denied. </Data>
</EventData>
</Event>
Log Name: System
Source: LsaSrv
Date: 7/24/2013 10:55:13 AM
Event ID: 40961
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
The Security System could not establish a secured connection with the server ldap/corp-dc1.corp.com/[email protected]. No authentication protocol was available.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LsaSrv" Guid="{199FE037-2B82-40A9-82AC-E1D46C792B99}" />
<EventID>40961</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:13.262489200Z" />
<EventRecordID>850092</EventRecordID>
<Correlation />
<Execution ProcessID="504" ThreadID="1332" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Target">ldap/CORP-dc1.corp.com/[email protected]</Data>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-DfsSvc
Date: 7/24/2013 10:55:24 AM
Event ID: 14548
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
The DFS Namespace service could not initialize the trusted domain information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DfsSvc" Guid="{7DA4FE0E-FD42-4708-9AA5-89B77A224885}" EventSourceName="DfsSvc" />
<EventID Qualifiers="49152">14548</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:24.000000000Z" />
<EventRecordID>850102</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security />
</System>
<EventData Name="DfsNoTrustedDomainInfo">
<Binary>B5060000</Binary>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-Security-Kerberos
Date: 7/24/2013 10:57:44 AM
Event ID: 4
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/corp-dc1.corp.com. The target name used was cifs/corp-dc1.corp.com. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (CORP.COM) is different from the client domain (CORP.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Kerberos" Guid="{98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}" EventSourceName="Kerberos" />
<EventID Qualifiers="16384">4</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:57:44.000000000Z" />
<EventRecordID>850163</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>CORP-DC6.CORP.com</Computer>
<Security />
</System>
<EventData>
<Data Name="Server">host/corp-dc1.corp.com</Data>
<Data Name="TargetRealm">CORP.COM</Data>
<Data Name="Targetname">cifs/corp-dc1.corp.com</Data>
<Data Name="ClientRealm">CORP.COM</Data>
<Binary>
</Binary>
</EventData>
</Event>
There are also the following errors in the Application event log
Log Name: Application
Source: Microsoft-Windows-CertificationAuthority
Date: 7/24/2013 10:55:13 AM
Event ID: 91
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificationAuthority" Guid="{6A71D062-9AFE-4F35-AD08-52134F85DFB9}" EventSourceName="CertSvc" />
<EventID Qualifiers="49754">91</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:13.000000000Z" />
<EventRecordID>254767</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="MSG_E_DS_RETRY">
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-CertificationAuthority
Date: 7/24/2013 10:55:30 AM
Event ID: 44
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
The "Windows default" Policy Module "Initialize" method returned an error. Logon failure: unknown user name or bad password. The returned status code is 0x8007052e (1326). The Active Directory containing the Certification Authority could not be contacted.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificationAuthority" Guid="{6A71D062-9AFE-4F35-AD08-52134F85DFB9}" EventSourceName="CertSvc" />
<EventID Qualifiers="49754">44</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:30.000000000Z" />
<EventRecordID>254773</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="MSG_E_POLICY_ERROR">
<Data Name="PolicyModuleDescription">Windows default</Data>
<Data Name="MethodName">Initialize</Data>
<Data Name="ErrorCode">0x8007052e (1326)</Data>
<Data Name="param4">The Active Directory containing the Certification Authority could not be contacted.
</Data>
<Data Name="ErrorString">Logon failure: unknown user name or bad password.</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-CertificateServicesClient-AutoEnrollment
Date: 7/24/2013 10:55:31 AM
Event ID: 6
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
Automatic certificate enrollment for local system failed (0x8007052e) Logon failure: unknown user name or bad password.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificateServicesClient-AutoEnrollment" Guid="{F0DB7EF8-B6F3-4005-9937-FEB77B9E1B43}" EventSourceName="AutoEnrollment" />
<EventID Qualifiers="16384">6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:31.000000000Z" />
<EventRecordID>254775</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security />
</System>
<EventData>
<Data Name="Context">local system</Data>
<Data Name="ErrorCode">0x8007052e</Data>
<Data Name="ErrorMsg">Logon failure: unknown user name or bad password.
</Data>
</EventData>
</Event>
Link to output of DCDiag on pastebin: http://pastebin.com/VFPTcEGT
Smply based on a quick look through of the dcdiag and the various event log messages, It seems to me that the NetLogon service not starting up is causing most of the errors; but I am not aware of how to get it to start up.

Thank you for the quick response!
Windows firewall is disabled for all network profiles.
We have do have 7 DC's in the forest. here's an image i created a while back that lists our DC's and shows the replication partners (not really relevant, but this shows the DC's) http://i.imgur.com/AtjGuiM.jpg
I believe May 27 was a date in which we performed maintenance/upgrades on our vmware virtual hardware on this VM; when we upgraded the virtual hardware, it created a new NIC device on this server (which is how the system lost it's IP address configuration).
Today, I assigned the correct IP to the 'new' NIC.
will look at link about Kerberos
I'm unfortunately not familiar enough with the purposes of the internal vs external forwarders to comment on this or make a change at this time.
IPConfig info shown below
DNS is AD integrated, each domain has it's own DNS servers and have conditional forwarders to point to the other domain when appropriate. I believe each DC is also running DNS, but via DHCP we only pass out at most two DNS servers to client systems (main
office, it's 192.168.1.7, 192.168.1.8)
C:\Users\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CORP-DC6
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection #
2
Physical Address. . . . . . . . . : 00-50-56-AD-5C-29
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::f43a:f215:c266:5a70%14(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.190(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 285233238
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-F5-25-A1-00-50-56-AD-5C-29
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{5B04D7AC-9161-4A51-9ADC-166E37EE4D0E}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\daniel_da>
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : corp-dc1
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
Physical Address. . . . . . . . . : 00-50-56-AD-29-1D
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.8
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
Primary WINS Server . . . . . . . : 192.168.1.7
C:\Documents and Settings\daniel_da>
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CORP-DC2
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter #3
Physical Address. . . . . . . . . : 00-50-56-AD-67-B0
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.7
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.7
192.168.1.8
Primary WINS Server . . . . . . . : 192.168.1.7
C:\Documents and Settings\daniel_da>
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : sub-dc2
Primary Dns Suffix . . . . . . . : sub.corp.com
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sub.corp.com
corp.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter
Physical Address. . . . . . . . . : 00-50-56-AD-39-7E
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.136
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
C:\Users\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Sibling-DC3
Primary Dns Suffix . . . . . . . : sibling.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sibling.com
corp.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . : corp.com
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection #
2
Physical Address. . . . . . . . . : 00-50-56-AD-6E-97
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7c97:854f:8bf5:efdb%17(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.147(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, May 27, 2013 2:53:39 PM
Lease Expires . . . . . . . . . . : Thursday, July 25, 2013 2:56:42 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.7
DHCPv6 IAID . . . . . . . . . . . : 285233238
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-B5-55-91-00-50-56-AD-6E-97
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
Primary WINS Server . . . . . . . : 192.168.1.7
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.occfiber.com:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : corp.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : corpsite3-dc7
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Dallas:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : BASP Virtual Adapter
Physical Address. . . . . . . . . : 00-19-B9-EA-65-FA
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.35.7
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.35.1
DNS Servers . . . . . . . . . . . : 192.168.35.7
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : siblig-dc1
Primary Dns Suffix . . . . . . . : siblingsite2.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sibling.com
corp.com
Ethernet adapter smpdc1_nw:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : BASP Virtual Adapter
Physical Address. . . . . . . . . : 00-14-5E-2B-0D-88
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 172.20.24.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 172.20.24.5
DNS Servers . . . . . . . . . . . : 172.20.24.2
172.20.24.221

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

JoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

E70 PDF Reader : Unable to open. File type not sup...

This morning I have bought an E70, among others due to its highscreen resolution and the possibility to run a PDF reader on it.
I have now tried ...
  - the pre-installed Adobe PDF Reader
  - the Adobe PDF Reader supplied with the PC Suite CD-ROM
  - the Adobe PDF Reader available on europe.nokia.com
I am fascinated by a software which presents itself in the About box as '1.5', prompts during installation for '1.0.5' and has filenames '1_5_0'.
Apart from minor variations in the SIS filenames they all share the same annoying feature: They refuse to display any of my PDF files but display a message 'Unable to open. File type not supported. 5. !' instead.
It doesn't seem to be a problem of the PDF files, since a collegue of mine was able to open them on his E61 or E70 (forgot to ask).
Any idea what this problem could be caused by?

I am speechless -- but happy.
The complaint about the file type only appears if you try to open a PDF stored in the phone memory but not if you try to open a PDF stored on the memory card.
Problem solved.

N79 (Error message :Unable to open .File type not ...

Dear nokia service manager,,
Iam sivakumar using the nokia N79 handset.Iam getting the message like this (Error message :Unable to open .File type not supported)when i was trying to open the video file shooted by some other camera.I have tried changing the format of the file..but no use ..i dont get ant suitable software converter in the internet.So kindly look into this matter as i need this very uregently...
hope its a mandatory feature as laptop and mobile interface are simple task nowadays in mobile...
pls reply me..its very urgent...thanku..

You could try Videora (http://www.videora.com/) - the downside here is that they have specific versions for specific phones, and sometimes it will makea file that plays perfectly in the desired phone but can't be shared to other models. The don't show a version for the N79, but try the N96 one because the N96 is the most similar OS to yours that they offer.

Unable to open email inbox or files. screen changed suddenly last night. got some message about patch not being applied. i have the patience of a gnat and have no clue how to fix this issue. HELP! in English

I'm running Mozilla-firefox on a Lenovo laptop. Last night the screen changed suddenly. brief alert about patch. unable to open email inbox to read/send emails. logged off thinking all would be right by morning. today, can access internet, google, etc, but unable to open email inbox. plus the listing of the various yahoo accts has changed the sequence order. please help. i depend on my email for my livelihood. i can read emails on my blackberry so the issue is not my internet provider.

In the patch 29, it is
function encode_attachment(str) {
var c, i, s = ''
for (i = 0; i < str.length; i++) {
switch (c = str.charAt(i)) {
case ' ':
case '#':
case '?':
case '%':
s += NN ? '_' : escape(c); break
default:
s += c
return s
NO issues seen, Able to open attachment which has space in the file name.

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on get info . What am I suppose to change in the setting on getinf

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

SMS: unable to open. message format not supported...

hey folks i've seen a bunch of guys asking this same question on another threads with no reply, is this a OS bug or something? from time to time i received SMS from my contacts and sometimes I am not able to open them and i got a message: "unable to open. message format not supported Symbian" even though i can read some text from the preview list.
any workaround?
thanks!
Powered by Nokia X6

try a reset there could be a file in the message which phone wont support
*#7370# security code 12345 back up your data 1st
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

E5 - unable to open. object type not supported

hi.
2 Month back i brought Nokia E-5 Mobile and after few weeks i upgraded the Memory from 2Gb to 8GB. After copying all files from 2gb to 8gb am not able to open or install any existing programs and files. Even maps are not working. When trying to open or install the files am getting this erro " unable to open object type not supported " . Kindly help on this error.
Thanks
Velavan

I have never attempted what you did, so can't say for certain, but I don't think memory card data is meant to be copied from one card to another (unless we're talking about data files like pictures or mp3's). I don't understand what you mean by being unable to install files. Are you trying to reinstall the programs that aren't working? If your 2GB card still works normally, I suggest you format the 8 GB card, reinstall the programs to the empty card, and re-download the maps data. If the programs still give you trouble, you may need to uninstall them from the 2 GB card first, but I don't think that should be necessary. I hope that helps.

Unable to open.File type not supported.

Hi.,
I'm geting error while opening any files in my meory card & even sometimes im getting disk error.could someone help me on fix this issue.
Nokia C6-00
Software Version : V 20.0.042

My Adobe version is Adobe Reader XI 11.0.10. The file was created by the
state tax authority for employers to be able to save and print the file
when tax data must be submitted to the state.
Lars Olov
2015-01-26 15:30 GMT+01:00 Vikrantt Singh <[email protected]>:
I can not open pdf files. This text appears:Unable to open PDF file
because the file type is not supported or the file is corrupted (eg to it
was sent as an email attachment and not decoded correctly). created by Vikrantt
Singh <https://forums.adobe.com/people/Vikrantt+Singh> in *Acrobat
Installation & Update Issues* - View the full discussion
<https://forums.adobe.com/message/7132068#7132068>

Unable to open message. Format not supported.

This problem has already been discussed here however I can provide some more detailed information. Our company runs a network of automatic telemetry stations. The stations send short messages containing some data to the users. Even though the message contains only a plain text and can be displayed on most mobile phones without any problem, it can't be displayed on some Nokia phones, e.g.. N8 and 2630. The model 2630 shows "Message cannot be displayed". The N8 shows "Unable to open message. Format not supported", but the beginning of the message (preview) is readable in the inbox.
On the sender side the Wavecom wireless CPU model Q2686 is used. I tried to send various messages using AT+CMGS command but regardless of the content they cannot be displayed on N8 and 2360.
Please help. If anyone is interested in this problem I can demonstrate it by sending an 'undisplayable' message to his mobile phone number.

Hi,
I have N8, and same thing happened to me when i recieved MMS Confg. for using operator internet mobile, "Message Format not supported"
about me i change to another GSM operator, and its work now.
i think u can add an access point manually, go to ur GSM Operator and take the setup details, and from conective > setting > Destinations > Add new acc. pt.
Hope this will help u.

Unable to open Notes

Similar Messages

Maybe you are looking for