Unable to open Numbers file in iCloud using Numbers 2.3 (iWorks 09)

Using my iMac (OS 10.8.5) and Numbers (2.3), I am unable to open a Numbers file built on my iPad2 (7.1.1) and stored on iCloud. I get an error message indicating that I need to upgrade Numbers on the iMac. The version available to download on the App Store is 3.2.2 and seems to require Maverick to run. i don't really want to spend the money on either, but will if I have to obviously. (DISLIKE). Are there other options? And will the upgrade also force me into iOS 8?
Thanks in advance.

Hi Reefkeeper,
You will need Mavericks to use Numbers 3. I don't use iCloud right now but it seems some users are experiencing difficulties at the moment with the iOS 8 upgrade. To Use Numbers in iCloud you will need iCloud Drive which requires iOS 8 and Yosemite on the Mac. Yosemite is not out yet.
I sync my Numbers files between my iPod and Mac using iTunes and file sharing. It is a little clunky but gets the job done. You can also email files.
It has been said on these forums that Numbers 3 is a free upgrade- I can't remember. I don't do a lot of printing or find and replace and Numbrs 3 has suited me very well. It is said to be more applescript friendly and of course that whole cloud thing. '09 will still be on your computer.
quinn

Similar Messages

Unable to open PDF file in browser using Reader 9 with IE8

I just updated to IE8 and when trying to open a PDF file on the browser, I received a message stating to use Adobe Reader 8 or 9. I downloaded AR9 and still receive the same message and cannot open PDF files in browser window. It defaults to my Adobe Acrobat 6.0 which will not open the file. I have Windows XP. I do not have a problem opening a PDF file in Yahoo mail with AR9. I have tried many different ideas on the web to no avail. Appreciate any help to be able to default to open PDF files in the browser using AR9 which is apparently required by IE8.

Fixed problem by taking to a computer store to find that my hard drive storage was maxed out. I had the hard drive repaced with a larger amount of storage. Problem resulted from inadequate amount of storage space which prevented me from downloading and installing Adobe Reader 9.
Thanks to al that responded.

Unable to open .htm file in browser using SharePoint 2013 ?

On Share Point 2013 we had .htm file which was published under excel as shown below (File name t1.htm)
As the Icon is different from normal excel file.
My question is why the .htm file is opening in Excel when we access from SharePoint Web Interface ?
And when we use the option "Open in Explorer" it opens the .htm file in browser.
I need the publish .htm file needs to be open in Browser.
Thanks for reply.

Looking at this a little more closely, what happens is when you upload the Excel HTM file, a folder is also uploaded to the Library (but hidden outside of the WebDAV view). This folder would be named "t1_files" in your case. If this folder is present (which
it needs to be as t1.htm references files within it, including all of the sheets), then it will attempt to open with the client application because of the association within C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\XML\DOCICON.xml,
referring to the line:
<Mapping Key="Excel.Sheet" Value="ichtmxls.gif" EditText="Microsoft Excel" OpenControl="SharePoint.OpenDocuments" OpenApp="ms-excel" />
Removing this line will cause it to be treated as a standard HTM file, but I'm not sure how that will work out for your scenario.
The other option is to install and configure Office Web Apps 2013 on a separate server so you can display Office documents in the browser.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

Unable to open PDF files from Fileserver Content Source using Browser

The situation is this :
A content source was created to search a fileserver
Search facility finds the files using the browser
Able to open MS Office files from the fileserver
Able to open PDF files that are in the Sharepoint Portal
Unable to open PDF files from the Fileserver
Currently using Sharepoint 2010. PDF Filter is installed and configured on the Sharepoint Server
Your assistance is always greatly appreciated.
Have a great day.
NRH

Hello Nate,
I have the necessary access to the folder.
The content source addresses are
\\172.25.136.53\KDrive\Home\Company\DAILYREP
\\172.25.136.53\KDrive\Home\Company\TRINMAR
\\172.25.136.53\KDrive\Process Safety Management
NRH

ERROR: Unable to open TUXCONFIG file

Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PM

Hi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM

ERROR: Unable to open structapps file!

Hello,
Having modified the structapps.fm in FM10, I am getting the following error within a dialog when attempting to use the same file in FM8:
ERROR: Unable to open structapps file! FA_errno -43
Is FM not backward compatible ? OR do I need to reread the file in FM8
Thanks

The file should be saved in the FM version that you're using it in. You can't use any newer FM version file in any older version of FM, e.g. FM8 can't open any FM10 files (except for the MIF formats).

ZAV 10 - Unable to open parameter file error

When trying to launch a ZAV 10 app, C-Cure Administration Console, users are getting an error "**Unable to open parameter file cc800cl.pf, errno 2. (1247)". This only appears to be happening on Win7. This did work when first created, but after a few weeks the error has started to pop-up.

If this was working and is not now, and you are certain nothing has changed on the client systems (or at least nothing that could interfere here), then this might be an issue with the license used when building the application. What is the expiry date of your license and was it applied prior to building this exe?
If this isn't expiring please open an SR for this issue, if you can. This is the information the support team will require:
- Copies of any warnings or errors around the time the issue occurs (or a copy of the application and system event logs, in .evtx format)
- A copy of the exe you are using
- If you can build the exe again as a diagnostic-mode executable and provide the diagnostics generated when attempting to run, that can be very helpful
- It may also be required that you send installation media for the application and your build process, so the team can attempt to reproduce the issue in-house
- You will also typically be asked for the .xappl file and associated Files folder, if reproducing in-house is required. This will become absolutely necessary if a ticket needs to be filed with Spoon, so sending it ahead of time is a good idea

"Unable to open config file" Error when starting tomcat

hi all,
Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
Content of 'catalina.out'
Unable to open config file
Starting service Tomcat-Standalone
Apache Tomcat/4.0.4
Unable to open config file
Starting service Tomcat-Apache
Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background thread

I have all those files too.
I think the 'config file' mentioned in the error log is the mod_jk.conf.
On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though.

"Unable to open project file" Error Message

I pulled an all-nighter (13 hours of editing) last night to create a critical project in FCE 3.5.1 on my Intel iMac running 10.4.11 then left this afternoon for a few hours and shut down my machine. Came back tonight and tried to open the project (which I saved on my Maxtor 1 TB external drive along with all of the scratch disk files). To my absolute panic, it won't open the file now with an error message that simply says, "Unable to open project file". HELP!!!! Anyone have any suggestions?!?!

In the past I found (and reported to Apple Feedback) the same bug Steve reports here, but I should recall that the problem:
- only appeared in PAL projects (probably not the case for kscritch) - never heard of it in NTSC
- was consistent in FCE 3.x, not so in FCE 4
I made tests importing .psd images with transparency into PAL projects using FCE 4, and I had various behaviours: sometimes the project worked, sometimes I couldn't open the project again (as in FCE 3), sometimes I had error messages with inconsistent behaviour (msg like "file error", but the project opened and file was there...), etc. so I decided to do without.
Now I only import .tif or .png images when I need transparency
Piero

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

Unable to open RAW files in CS6 after update

Hi all,
I have Photoshop CS6 and have been able to open my D4 Raw files with no issues using the Camera Raw version 7.1 plugin.
Yesterday I upgraded my Mac OS from Snow Leopard to Yosemite (a big jump I agree) and proceeded to update Photoshop to the latest version as well as installing Adobe DNG Converter 8.8.
I am apparently still using the same 7.1 plugin version as I always have but I am now no longer able to open any RAW files through Photoshop as it displays a message saying 'files not recognised' when I try to open them.
Have I skipped too many updates? Do the latest Photoshop CS6 updates leave me unable to open RAW files? Am I being pushed down the CC route?
Could anybody offer any help at all as I have a wedding to edit but cannot open any files!!! Stress!!!
I backed up my system through Time Machine before I did the update but im not sure if I restore that I will still have Yosemite OS running.
Any help or advice really is appreciated.
Many thanks.
Phil

Camera RAW should be at version 8.8 for CS6
Adobe - Photoshop : For Macintosh
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

I am unable to open video files on this website.

When I click on video links of the following website--http://tubtub.com/--I receive an error message that reads as follows:
"File not found
Firefox can't find the file at mms://TITLE.tubtub.com/.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.
Try Again"
I had initially seen a window that was named "Launch Application," which, seemingly, allowed one to choose an application by which to open the video links. I chose my VLC player to do this and checked a box to associate this "Launch application" window with the VLC player, but received an error message that VLC was unable to open the file that began with an "mms" URL. Then I was never able to get back to that "Launch application" window to select another application, such as Windows Media Player, Real Player, etc. I even tried uninstalling my Firefox browser and the VLC player and reinstalling them both, all to no avail.
Please explain how I may get these video links to play and the "Launch Application" window to open again. I recall having used TubTub.com successfully before.
Thank you.

Hi mendcocr,
Please see this document about configuring web browsers to display PDF files: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html.
Please let us know if you need additional help.
Best,
Sara

I can't get pages 5.01 to open pages files from iCloud, although they open in iCloud Pages without difficulty.

I can't get Pages 5.01 to open Pages files from iCloud, although they open in iCloud Pages without difficulty.
I am using the most up to date version of Mavericks and Pages and can log into iCloud without any problems. Is this just a glitch? The files all behaved properly under previous versions and the initial release of the new version of Pages.

Pages for iCloud beta is a weird beast and as it says "beta".
I think it is the least compatible of all the many different .pages files floating around out there.
Peter

'Unable to open project File' Please help....

Help. Since yesterday, Final Cut Pro has been crashing every time I have tried to render something. I have used the FSC Maintenance Pack that has been recommended and ran Crash Analyser and Corrupt Clip Finder. No corrupt clips were found and the Crash Analyser fixed the problem for a while and I was able to work for a couple of hours. (prior to this I also removed some Motion files and that also temporarily stopped the crashing). I began working on my project again today, and the same thing started to happen. I kept having to turn everything off at the source until finally I gave up! Just before I turned it off I started running Autosave Cleaner but it seemed to freeze too so I Force Quit it. I have just turned it all back on again and to my horror, my project is not even opening. My other FCP projects are opening but not the one I am working on. I have no idea what to do. Final Cut opens and the message is 'Unable to open Project File'. I am so upset and really hope that someone out there can help.
I run 10.5.8, I have 10 GB memory. All my clips are imported as XDCAM EX 720p25 (original format MPEG HD) but I have been working in this project for weeks without a problem.
Thanks in advance
Gill

I don't know why it is set to the internal disk, but that is the default. That is not project related. It is system related (hence System Settings). So probably you started fcp one without the external disk attached. FCP forces you then to choose another scratch-, waveform-, thumbnail-, autosave location.
Probably you've set it all to the internal disk then.
Next time when the external disk was there again you might have only reset the scratch disk, but not your Autosave location... Just a thought.
That is, IMHO, the disadvantage of system orientated scratch disk settings...
Rienk

Unable to open Numbers file in iCloud using Numbers 2.3 (iWorks 09)

Similar Messages

Maybe you are looking for