Unable to open NWA in PI 7.1
Hello Friends,
We have PI 7.1 (EHP1). In all our systems (Development, Quality, Production), form the Integration Builder Page, when we click "NetWeaver Administrator", the NWA screen is not coming.
It shows like below:
In the browser : http://:8063/nwapi
Server not found
Firefox can't find the server at :8063
Previously it was working, In the last 3 days, this problem comes.
Could you please clarify friends, why it is not showing the NWA screen?
Kind regards,
Jegathees P.
Hi Srinivas & Spant
Thank you very much for your quick reply. Now I am able to open NWA by directly type the URL in the browser.
I will go through the Notes mentioned in the Link. It is surprising to me previously it was working from the XI start page itself suddenly it is not coming.
Thank you very much Friends.
Similar Messages
-
Hi,
When we try to send file over seeburger SFTP (receiver) we are getting the error as below.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true, >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true
But we are able to connect through filezilla . we are able to create and delete file using the same username and password which is being used in SFTP adapter.
we have imported the both dsa and rsa keys in SFTP partner folder in NWA. Even though we are getting same error.
Thanks,
VinayakHi Ram,
we checked with network team and port 22 is open and they are able to ping to the target system.
we checked the seeburger logs and we see EOF received from remote site error:
Caused by: com.maverick.ssh.SshException: EOF received from remote side [Unknown cause]
#at com.maverick.ssh2.TransportProtocol.b(Unknown Source)
#at com.maverick.ssh2.TransportProtocol.i(Unknown Source)
#at com.maverick.ssh2.TransportProtocol.nextMessage(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter.d(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter.access$000(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter$_b.run(Unknown Source)
Thanks,
Vinayak. -
Unable to open SLD & other SolMan Portal:
Dear All,
I have newly Installed Solution Manager 7.1 SR-1 on windows 2008 Sybase ASE database and ran post installation activities.
After updating SLD by applying all cim & CR files, I am unable to open SLD and other Solution Manager portals using IE-8 with http://<FQDN>:50000/index.html, /nwa, /sld, /useradmin etc.
For your reference & investigation, please see attached DefaultTrace Logs & applications log files.
Please help me and do the needful ASAP.
Thanks & Regards
Ahsan.Hi,
According to note 1292171 page no 3:
- Server receives HTTP code 401 "Unauthorized". Possible
reasons: the user is locked, user/password are not set
correctly in the logical port, the user does not have right to
execute WS calls. If SSO is used there may not be trust
relationship between consumer and provider.
The 401 return code indicates an authorization problem. Please ensure
that the user you have configured in the SLD bridge is valid on the
target SLD (not the sending SLD) and has the required roles
DataSupplierLD
LcrInstanceWriterAll
LcrAdministrator
Are you using solman_admin user to run solman_setup? secondly are you
able to login to the SLD of your solman using solman_admin?
http://fqdn:5NN00/sld
If you are able to get into the website, can you click on the
'administration' and check if the status is running?
Regards,
Aidan -
Unable to open bpm task in uwl
Hi experts,
I am getting below error to open BPM task -
Unable to open the task xxxxxxxxxxxxx because of technical issues. Contact your system administrator for more details.
Error getting suddenly and log message is - I/O problem occurred when executing Archiving Command indexdescribe.
Please clarify dependency here- If I deployed DC on server with some changes, and tried to open old task which is in NEW status, what would be the chances to get error.
I believe there is no dependency, please correct me and advice how to fix above error.
Thanks in advance.
IanHi all,
I am sorry to delay in reply, I went on vaction.
Still issue persists, and observed issue seems not deploying new version of BPM DC.
As per my application, once user submits WebDynpro application, UWL task will trigger. If I open the task no error coming out, otherwise If I opened the task after few hours I am getting error.
So far I thought issue with new version of BPM DC, but issue now seems in different way.
Please find log u2013
800#Error#com.sap.tc.bpem.nwa.processmgmt.procmgmt.procmgmt.ProcMgmt#
com.sap.BPM.nwa_pm.000006#BC-BMT-BPM-MON#sap.com/tcbpemnwaprocessmgmt#3C4A9248728053DD0000000200004770#216718650000000004#sap.com/tclmitsamuimainframewd#com.sap.tc.bpem.nwa.processmgmt.procmgmt.procmgmt.ProcMgmt#Guest#0##5366996011D611E18AB900000CEADD3A#f7da953311d511e1c6fb00000ceadd3a#f7da953311d511e1c6fb00000ceadd3a#0#Thread[HTTP Worker [@1437481805],5,Dedicated_Application_Thread]#Plain##
Retrieval of Process instance details in 'Manage Process' has failed.Contact support.[Ljava.lang.StackTraceElement;@96dcd01#
#2.0 #2011 11 18 03:13:48:471#0-800#Error#com.sap.tc.bpem.nwa.processmgmt.procmgmt.procmgmt.ProcMgmt#
com.sap.BPM.nwa_pm.000021#BC-BMT-BPM-MON#sap.com/tcbpemnwaprocessmgmt#3C4A9248728053DE0000000000004770#216718650000000004#sap.com/tclmitsamuimainframewd#com.sap.tc.bpem.nwa.processmgmt.procmgmt.procmgmt.ProcMgmt#Guest#0##5366996011D611E18AB900000CEADD3A#0f8a891811d611e1aba600000ceadd3a#0f8a891811d611e1aba600000ceadd3a#0#Thread[HTTP Worker [@1132952642],5,Dedicated_Application_Thread]#Plain##
Retrieval of Process instance details in 'Manage Process' has failed.[Ljava.lang.StackTraceElement;@7c47dd9d
[EXCEPTION]
com.sap.tc.lm.itsam.ui.proxy.exception.JMXAccessControlOperationException: Caller Guest not authorized, required permission missing (javax.management.MBeanPermission -\#fetchProcessInstanceInfo[com.sap.default:SAP_ITSAMGalaxyProcessManager.Name=SAP_ITSAMGalaxyProcessManager_EA5.SystemHome.abdbbh0,SAP_ITSAMJ2eeCluster.CreationClassName=SAP_ITSAMJ2eeCluster,SAP_ITSAMJ2eeCluster.Name=EA5.SystemHome.abdbbh0,cimclass=SAP_ITSAMGalaxyProcessManager,type=SAP_ITSAMJ2eeCluster.SAP_ITSAMGalaxyProcessManager,version=3.3] invoke)
at com.sap.tc.lm.itsam.ui.proxy.JMXGenericModelClassMBean.invokeOperation(JMXGenericModelClassMBean.java:632)
at com.sap.tc.lm.itsam.ui.proxy.JMXAbstractModelClass.invokeOperation(JMXAbstractModelClass.java:160)
at com.sap.tc.bpem.nwa.processmgmt.procmgmt.model.SAP_ITSAMGalaxyProcessManager.fetchProcessInstanceInfo(SAP_ITSAMGalaxyProcessManager.java:104)
at com.sap.tc.bpem.nwa.processmgmt.procmgmt.procmgmt.ProcMgmt.supplyInstances(ProcMgmt.java:2125)
at com.sap.tc.bpem.nwa.processmgmt.procmgmt.procmgmt.wdp.InternalProcMgmt.supplyInstances(InternalProcMgmt.java:479)
at com.sap.tc.bpem.nwa.processmgmt.procmgmt.procmgmt.wdp.IPublicProcMgmt$IInstancesNode.doSupplyElements(IPublicProcMgmt.java:2875)
at com.sap.tc.webdynpro.progmodel.context.DataNode.supplyElements(DataNode.java:108)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:263)
at com.sap.tc.webdynpro.progmodel.context.MappedNode.createMappedElementList(MappedNode.java:78)
at com.sap.tc.webdynpro.progmodel.context.MappedNode.supplyElements(MappedNode.java:71)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:263)
at com.sap.tc.webdynpro.progmodel.context.Node.getElements(Node.java:270)
at com.sap.tc.webdynpro.progmodel.context.Node.sortElements(Node.java:555)
at com.sap.lm.itsam.ui.util.table.TableSorter.sort(TableSorter.java:211)
at com.sap.lm.itsam.ui.util.table.TableSorter.<init>(TableSorter.java:138)
at com.sap.lm.itsam.ui.util.table.TableSorter.<init>(TableSorter.java:152)
at com.sap.lm.itsam.ui.util.table.TableAccessories.createSorter(TableAccessories.java:420)
at com.sap.lm.itsam.ui.util.table.TableAccessories.createSorter(TableAccessories.java:370)
at com.sap.tc.bpem.nwa.processmgmt.procmgmt.procmgmt.ProcMgmtView.wdDoModifyView(ProcMgmtView.java:329)
at com.sap.tc.bpem.nwa.processmgmt.procmgmt.procmgmt.wdp.InternalProcMgmtView.wdDoModifyView(InternalProcMgmtView.java:2547)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:94)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:746)
at com.sap.tc.webdynpro.progmodel.window.ViewController.modifyView(ViewController.java:254)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:432)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:438)
at com.sap.tc.webdynpro.clientserver.phases.ModifyViewPhase.execute(ModifyViewPhase.java:69)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:162)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:110)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:97)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:514)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:55)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1689)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1503)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:899)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessing(ApplicationSession.java:871)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:356)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:328)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.wdc.DispatcherServlet.doContent(DispatcherServlet.java:89)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:404)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:203)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:440)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:429)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:82)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:268)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:54)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:447)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:264)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: com.sap.engine.services.jmx.exception.JmxSecurityException: Caller Guest not authorized, required permission missing (javax.management.MBeanPermission -\#fetchProcessInstanceInfo[com.sap.default:SAP_ITSAMGalaxyProcessManager.Name=SAP_ITSAMGalaxyProcessManager_EA5.SystemHome.abdbbh0,SAP_ITSAMJ2eeCluster.CreationClassName=SAP_ITSAMJ2eeCluster,SAP_ITSAMJ2eeCluster.Name=EA5.SystemHome.abdbbh0,cimclass=SAP_ITSAMGalaxyProcessManager,type=SAP_ITSAMJ2eeCluster.SAP_ITSAMGalaxyProcessManager,version=3.3] invoke)
at com.sap.engine.services.jmx.auth.UmeAuthorization.checkMBeanPermission(UmeAuthorization.java:100)
at com.sap.engine.services.jmx.JmxServerFrame.checkMBeanPermission(JmxServerFrame.java:101)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.checkMBeanPermission(MBeanServerSecurityWrapper.java:438)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:288)
at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:813)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:367)
at com.sap.lm.itsam.ui.connection.impl.ITSAMUIMBeanServerConnectionWrapper.invoke(ITSAMUIMBeanServerConnectionWrapper.java:350)
at com.sap.tc.lm.itsam.ui.proxy.JMXGenericModelClassMBean.invokeOperation(JMXGenericModelClassMBean.java:613)
... 77 more
Caused by: java.security.AccessControlException: access denied (javax.management.MBeanPermission -\#fetchProcessInstanceInfo[com.sap.default:SAP_ITSAMGalaxyProcessManager.Name=SAP_ITSAMGalaxyProcessManager_EA5.SystemHome.abdbbh0,SAP_ITSAMJ2eeCluster.CreationClassName=SAP_ITSAMJ2eeCluster,SAP_ITSAMJ2eeCluster.Name=EA5.SystemHome.abdbbh0,cimclass=SAP_ITSAMGalaxyProcessManager,type=SAP_ITSAMJ2eeCluster.SAP_ITSAMGalaxyProcessManager,version=3.3] invoke)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:327)
at java.security.AccessController.checkPermission(AccessController.java:546)
at com.sap.engine.services.jmx.auth.UmeAuthorization.checkMBeanPermission(UmeAuthorization.java:84)
... 84 more
please do adivce to fix.
Ian
Edited by: ian.sapce on Dec 13, 2011 4:53 PM -
I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?
The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC -
Brand new Mac Book Pro
Purchased in Mexico's Department store Liverpool on June 20th 2012
Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
Upgraded memory from 4Gb to 8Gb on June 28th.
Tried to write on my external HD (previously written on a windows based PC) with no success.
Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
Then formatted my external HD and copied back all my information to it.
deleted all the information from my MacBook Pro HD.
Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
Looked in the trash bin and there it was, all the information previously deleted..
Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
Could not get enough space released, after several attpempts the trash bin was finally emptied.
All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
"Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
The following is the script that appears on the screen upon safe boot. and halt after the last line.
AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine Policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All Rights Reserved.
MAC Framework Succesfully initializad
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vextors 64:87
ACPI: System State [SO S3 S4 S5] (S3)
PFM64 (36cpu) 0xf10000000, 0xf0000000
Aplconsole relocated to 0xf1000000
PCI configuration changed (bridge=16 device=4 cardbus=0)
[ PCI configuration end, bridges 12 devices 16 ]
Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDateless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless controller
5.100.98.75
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1 com.apple.launchd 1 *** launchd[1] has started up. ***
com.apple.launchd 1 com.apple.launchd 1 *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Any help or suggestions on what to do next would be welcomed.
I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
Best regards
Sergio RamosReinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard -
I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?
Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
I am unable to open Icloud on my PC with Windows 7 but have it installed
I am unable to open Icloud on my PC with Windows 7 but have it on my Iphone & Ipad working OK
Please helpThe menu selection only shows the other options if you already have a selection active; a selection made with one of the available tools like lasso or quick selection. First select with the tools, then use the menu 'Select'.
-
I installed iOS7 on my iPhone5 and now I am unable to open iTunes - the screen just stays blank.
I have checked date and time and wifi settings.
Not sure what else to do.
I do have iMatch active on my device and its working fine on my other iPohne with iOS7 installed.
Any help please!Have you tried logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then logging back in ? If it's still the same after that then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
-
Unable to open Apple application
Last week, I did the most current software updates. Ever since then, I have been unable to open certain Apple programs such as iChat, Skype, Preview, Pages, Photo Booth, etc. I have tried to download AIM, but the computer says it isn't supported. Also, now when I try to open Photo Booth, it says my graphics card doesn't support it, but I have never changed the card from the one the computer came with. The programs will open up, and then immediately quit, and I am left with "The application _____ quit unexpectedly" message. No matter how many times I relaunch and reset, ignore, or report, I can't get them to open. I'm in college and really have no way to get to a Genius Bar for a few more weeks, and I don't have the Leopard disk with me. Is there any way I can fix this on my own? Thanks!
I think it was the repair disk permission that actually worked for me. I tried it once and got no result, and then tried to download the updater. For whatever reason, I couldn't even download that. So I went back and did the disk permission repair again. It still didn't seem to work, so I just turned the computer off out of frustration. When I turned it back on, it was all fixed. So I'm not entirely sure what it was that fixed it...all I know is it works now!
-
Error unable to open script file
I have been using DW8 since it came out. I am running Windows 7. Everything was working fine until I had hard drive failure. Replaced hard drive reinstalled Windows and DW8. Now when I try to insert an image I get the message "unable to open java script file c:\program files\Macromedia\Dreamweaver 8\configuration\objects\common\AccessibleImage.js (error 2)".
I have done the usual--rename config file--reinstall DW8--clean register and reinstall--run as admin.--run in compatibility with XP SP2, etc. but nothing works.
Help would be invaluable to me.Your version isn't listed here but something on this page may help you...
http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html -
ERROR: Unable to open TUXCONFIG file
Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PMHi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM -
ERROR: Unable to open structapps file!
Hello,
Having modified the structapps.fm in FM10, I am getting the following error within a dialog when attempting to use the same file in FM8:
ERROR: Unable to open structapps file! FA_errno -43
Is FM not backward compatible ? OR do I need to reread the file in FM8
ThanksThe file should be saved in the FM version that you're using it in. You can't use any newer FM version file in any older version of FM, e.g. FM8 can't open any FM10 files (except for the MIF formats).
-
Unable to open .eps file "unknown format and cannot be opened" ?
A client sent me an .eps file (logo). I tried opening it in Illustrator AND photoshop (just to see if it was saved in one vs the other program) - however to no avail.
Illustrator gives me a message "unknown format and cannot be opened"
Photoshop gives me a message "photoshop was unable to parse the postscript".
I'm using Adobe CS4, and I've never seen this message before—would love to know what this means and how to resolve?
File attached if anyone is able to open / fix it?
Thanks kindly,
ChemolThanks for the advice Scott - does compression improve the .eps? Is it
silly for me to ask them to compress it since the file is only 766 KB
(that's how big the attachment is in my email - though I am unable to open
it)?
My friend is able to open it on his end - however the 3rd person (client) is
the one who sent it, and I have already requested a different version - no
response from them yet. Unfortunately what the company "has" is what he
will likely give to me again (ie: same file / unable to open). So ... I am
curious about how I can resolve this issue on my end - if possible?
Do you know what the AI and Photoshop error messages mean? Could the issue
be a mac vs PC concern? Or is it a corrupt file? Could it be a software
version issue (old vs new) ... or Quark incompatibility?
.... just guessing at this point....Any insight as to what different
scenarios may apply in this situation would be greatly appreciated ..thank
you.
Maybe you are looking for
-
DVD Studio Pro 4.0.2 encoding error code?
I've just created a dvd which all works fine as a simulation (menu 1 .. 2 buttons, menu 2 .. 14 buttons, 1 x 63 minute dv pal asset, 3 jpegs), but the dv asset wont encode .. I continuously get an error: -2. I've re-exported from fcp 4 times, onto di
-
Invoice clearing issue.
Hello Experts : Is there anyway to create a dummy clearing document which will make SAP think that a payment has been made? We have 2 different SAP system , And Invoice is created in SAP 1 and replicating in SAP 2 via Interface, so both system have s
-
SQL Developer 1.5.1 and 64-bit Vista
I have reviewed some of the post and looking at differnt JDK's. The application comes up; however, I can't create a connection. I hit the plus button and nothing happens. Any new news?
-
File status remains "new version available"
Hello everyone, We are a writing team of two people and some time ago a third person joined us. We are working with RoboHelp HTML 9 and use Robosource Control to share our project. This third person has been given access to the Robosource Control pro
-
How do I change from a Windows subscription to a Mac subscription?
I have just subscribed to Adobe Acrobat Standard version but it has come for Windows; I need it for a MacBook Pro. What should I do