Unable to open Office 2010 file in Office professional Plus 2013

Hi All,
Excel file created in Excel 2010 opens correctly along with edit option where the owner has created it in protect mode available in excel.
But when we try to open the same in office 2013 it opens where the protected mode enable, if we click view it gives formulas instead of just enabling user to edit the protected cell.
Please help..

Hi,
Thanks for your question.
Does this only happen to some specific files or all? When you say "protect mode", do you mean the "Protected View"?
We can not fully understand your query based on your current description. Please elaborate a little bit on your case, or provide a sample file, so that it will be easy for us help you.
You can send the sample file to this email account:
[email protected] and inform us here (the email subject should be the link of this thread).
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

How to read Office 2010 files?

Latest IOS is not yet able to open and read Office 2010 files, no application is available too: any suggestion? Thanks

I just opened a XL 2010 attached to a gmail email, (just for viewing) on my Ipad2 the document Icon had an "E" , just wondering IF what opened was native to the Ipad2 OR was GoogleDocs (which I have and acct for ) but this doc is not on GD, Oh by the way in Google DOCS with the Ipad 2 you can do all the office docs editing ,just fine! (I have not downloaded anything from the Store that would do this)

I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

No, it is not a backup method at all. If you delete a sync'd file on any device, you delete it permanently from iCloud. That by its very essence is not a backup solution therefore. A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

Upgrade Office 2010 Standard to Office 2010 Pro Plus using Config.xml

Hello,
I am upgrading Office 2010 Standard to Office 2010 Pro Plus. But after using the below config pro plus did get installed but both versions of Office 2010 ( Stand and Plus ) show up on the machines. I want only Office Pro plus to appear.
The second issue is that even after uninstalling Office 2010 Standard from the Control panel the Office shows activation of both ( Going to --File ---Help)
How can I edit this config.xml to remove office 2010 Standard first and then upgrade to Office 2010 Pro Plus?
<Configuration Product="ProPlus">
<Display Level="None" CompletionNotice="No" SuppressModal="Yes" AcceptEula="Yes" />


<PIDKEY Value="aaaa-aaa-aaa-aaa" />
<COMPANYNAME Value="XYZ Co." />
<Setting Id="AUTO_ACTIVATE" Value="1" />







</Configuration>

Hi,
Here is not a Config.xml solution, but we can use it as a workaround, basically automate the uninstallation of Office 2010, reboot the computer and then deploy Office 2010. You may find the following article useful if you need more info on that.
http://blogs.technet.com/b/odsupport/archive/2011/04/06/how-to-perform-an-uninstall-upgrade-to-office-2010.aspx
Regards,
George Zhao
TechNet Community Support

REP-0004: Warning: Unable to open user preference file.

Hi,
I am creating an invoice header in Payable through open interface in r12. I have inserted one line in ap_invoices_interface table.
When I run Payables Open Interface Import request, it completes normal but invoice does not create.
Please see below log file and provide your guidence.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXIIMPT module: Payables Open Interface Import
+---------------------------------------------------------------------------+
Current system time is 24-DEC-2013 12:39:46
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_source='MANUAL INVOICE ENTRY'
p_batch_name='test4'
p_purge_flag='N'
p_trace_switch='N'
p_debug_switch='N'
p_summary_flag='N'
p_commit_batch_size='1000'
p_user_id='19334'
p_login_id='2499994'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00000: 0 invoice(s) were created during the process run
MSG-00000: 0 invoice(s) were fetched during the process run
MSG-00000: summarize flagN
MSG-00883: After Repport Trigger: Setting the Org Context to Multiple
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 24 12:39:47 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Regards
Farooq

Please also see if the following docs help.
R12: Master Troubleshooting Guide for Supplier Contacts Open Interface Import Report (APXSCIMP) [Video] (Doc ID 1373699.1)
R12: REP-0004 Error While Running Supplier Contacts Open Interface Import Program (APXSCIMP) (Doc ID 1195815.1)
R12: APXSUIMP Ends With REP-0004 Error, But Output Does Not Display Reason for Rejection (Doc ID 1060824.1)
Thanks,
Hussein

Error message: "Unable to open the physical file" when trying to attach AdventureWorks database

I have searched the internet and this forum and have not found an answer...
I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005. I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'. I attempt to run the following script:
exec sp_attach_db @dbname = N'AdventureWorks',
@filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
@filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
The error message I get back is:
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write. I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist! They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
What do I have to do to install the AdventureWorkds database????

Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day

Unable to open the downloaded file

Unable to open the downloaded file:
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.1.0 -> for Windows x86 -> File2
http://www.oracle.com/technetwork/middleware/performance-management/downloads/hyperion-foundation-1112-086772.html
Error message -
Cannot open file: it does not appear to be a valid archive. If you download this file, try downloading the file again.
Tried many a times and used various unzipping tool.

do not pause the download in the middle of the download.
with some download software, you can pause/stop the download in middle and continue.it will corrupt the software.
else in middle the due to network... it may corrupt.
check/compare the size with the original bytes mentioned in the oracle software download index size matches your downloaded file size.
try to download it again.
Good Luck.

Unable to open Form Repsonse File

Hello,
I am unable to open a response file to one of my distributed forms.
I have made no changes to my system or the file. I get the following error
"To view the Flash technology content in this pdf file, please install this version of Flash Player that supports Adobe Reader and Acrobat"
If I click Proceed to download page, nothing happens.
Any suggestions??
NB: All other flash content works on this computer, Flash version 11,7,700,179

do not pause the download in the middle of the download.
with some download software, you can pause/stop the download in middle and continue.it will corrupt the software.
else in middle the due to network... it may corrupt.
check/compare the size with the original bytes mentioned in the oracle software download index size matches your downloaded file size.
try to download it again.
Good Luck.

Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

hi,
am running the below command for moving sql serevr mdf and ldf files from one drive to another : c drive to d drive:
but am getting the below error
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
use master
DECLARE @DBName nvarchar(50)
SET @DBName = 'CMP_143'
DECLARE @RC int
EXEC @RC = sp_detach_db @DBName
DECLARE @NewPath nvarchar(1000)
--SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
DECLARE @OldPath nvarchar(1000)
SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
DECLARE @DBFileName nvarchar(100)
SET @DBFileName = @DBName + '.mdf';
DECLARE @LogFileName nvarchar(100)
SET @LogFileName = @DBName + '_log.ldf';
DECLARE @SRCData nvarchar(1000)
SET @SRCData = @OldPath + @DBFileName;
DECLARE @SRCLog nvarchar(1000)
SET @SRCLog = @OldPath + @LogFileName;
DECLARE @DESTData nvarchar(1000)
SET @DESTData = @NewPath + @DBFileName;
DECLARE @DESTLog nvarchar(1000)
SET @DESTLog = @NewPath + @LogFileName;
DECLARE @FILEPATH nvarchar(1000);
DECLARE @LOGPATH nvarchar(1000);
SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
exec xp_cmdshell @FILEPATH;
exec xp_cmdshell @LOGPATH;
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
go
can anyone pls help how to set the db offline. currently i stopped the sql server services from services.msc and started the sql server agent.
should i stop both services for moving from one drive to another?
note: I tried teh below solution but this didint work:
ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
Update:
now am getting the message :
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
(3 row(s) affected)
(3 row(s) affected)
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

First you should have checked the database mdf/ldf name and location by using the command
Use CMP_143
Go
Sp_helpfile
Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
Database is already detached that’s why db offline failed
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
Attached step is failing as there is no mdf file
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
Solution:
Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

REP-0004 warning: Unable to open user preferance files

Hi,
I am new to R12. This is the upgradation project 11.5.1.2 to R12. we are newly installed the R12 application and 10g database.
I am going to customize the standard report 'Printed Purchase Order Report', the rdf file is 'POXPRPOP'. but it is not getting any out put and xml tags also. even standard report also not getting any output and I noticed in logfile that the error like 'REP-0004 warning: Unable to open user preferance files'.
I have tested in backend, its getting the data. then I have added command MO_GLOBAL.SET_POLICY_CONTEXT('S'.org_id) in before report trigger also. but getting same issue.
Could you please help me wheather I need do any setups/modifications in RDF or Application. This is very urgency.
Thanks in Advance.
Regards,
Thirupathi

Hi Hussein,
Thank you for your valuable response.
I have followed the same steps for this customization what they are given in the metalink ID 374165.1.
And one more thing, I am not getting any output if i ran the standard program 'Printed Purchase Order Report (Portrait)' in R12. what it could be the problem.
Regards,
Thirupathi

Unable to open the XML files in Nakisa

Hi Gurus,
We are unable to open certain XML files in Nakisa. They show up as encrypted in the notepad or fail to open using the XML Marker. The files in question are
AppResources.xml
LoginConfiguration_SAP_Standard
LoginConfiguration_Anonymous
Purpose: We want to enable the SSO with the portal . We have checked the radio button but nakisa does not recognize the SSO ticket from the portal (Any folder in Nakisa where we need to place the Portal ticket?)
Also we want Nakisa to show the org chart for the logged in user. Luke had mentioned that some changes need to be made in the AppResources.xml (hope i correctly remember this) and we were looking to make these changes (rather try out.. any pointers please..?)
Thanks and Regards,
Arun E V

Hi Arun,
These files are encrypted. If your organisation is a partner with Nakisa you can obtain the decrypter from them.
Portal SSO works without any configuration directly in the XML files. If you are getting an error stating that the Portal ticket cannot be interpreted then your configuration is not correct. In your URL iView you need to ensure the fully qualified domain name (FQDN) is used for the application URL. In the Administrator Console you need to ensure you enter the system details (Host, Sys Nr and Client) for the backend system which holds your SSO ticket for that Portal. You need to use FQDN here too.
There is additional security configuration that can be done in the XML files but SSO will still work with just the Administrator Console configuration.
I hope that helps!
Luke

Unable to open in pdf files in ipad 3 using adobe reader 10.2 but able to do so in ipad 2 using adob

Unable to open in pdf files in ipad 3 using adobe reader 10.2 but able to do so in ipad 2 using adobe reader x 10.1 .

Can you please share the file you are trying to open with us at [email protected]? Also, can you please confirm that you've updated the Adobe Reader on your iPad 3 to the latest version using iTunes or the AppStore app?

I am unable to open a PDF file in Firefox 4. I have no problem with IE8

I am unable to open a PDF file in Firefox 4. I have no problem with IE8

Hi Nupoorv,
Thanks for contacting us.
Could you please provide some details like from where you downloaded your pdf , and what happens when you click on 'Open in Adobe Reader' .
On tap on 'Open in Adobe Reader' does Adobe Reader application come in focus .
You can follow think link also which provide details of how you can open documents in Adobe Reader http://forums.adobe.com/docs/DOC-2532
Let us know if you still face problem.
Thanks
-Satyadev

When I open an encryted pdf file in my Hp Slate 7 voice Tab it was unable to open the pdf file.Tje same file was opening with other pdf reader software.Kindly Help.

When I open an encryted pdf file in my Hp Slate 7 voice Tab it was unable to open the pdf file.Tje same file was opening with other pdf reader software.Kindly Help.
[spam link removed]

Could you please send the pdf to [email protected] so that we may investigate the issue?
Thanks,
Adobe Reader Team

After updating silverlight, i'm unable to open any pdf files in the system

After updating silverlight, i'm unable to open any pdf files in the system

According to your User Agent you posted this question using Internet Explorer 11 on Windows 8.1. Are you having a problem with Firefox? What Firefox version?
You said you are having a problem opening PDF files on your system. Can you explain that better? Mozilla Support can help you with opening PDF files in Firefox, which uses a built-in PDF reader. Maybe one of these articles will help?
* [[View PDF files in Firefox without downloading them]]
* [[How to disable the built-in PDF viewer and use another viewer]]

Unable to open Office 2010 file in Office professional Plus 2013

Similar Messages

Maybe you are looking for