Unable to open Planning Classic from Workspace

Hi,
Version 9.3.1, Windows 2003
I configured classic planning; I can access Application directly from Planning URL but when i open workspace and
Navigate>administer>Classic Planning administration>Planning administration
I get error:
"Invalid or could not find module configuration"
"required application module Hyperion Planning.Planning is not configured. Please contact your administrator. "
please help.

Hi John,
I reconfigured and see similar errors
details about errors
"Invalid or could not find module configuration"
"required application module Hyperion Planning.Planning is not configured. Please contact your administrator. "
communication error> details
http://amralbhypt02:19000/HyperionPlanning/conf/HspJSConfig.xml?LOCALE_LANGUAGE=en <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>........................
,.............

Similar Messages

Issue opening Planning application from Workspace

Applications are opening fine from regular URL but from Workspace the "Opening Application" window is running forever.
Edited by: user4551969 on Jul 23, 2009 1:44 PM

Hi,
You don't have to install EPMA if you want to use classic planning and access it through workspace.
It might be that you have not configured in the correct order, this is quite common, if you run the configurator again, select foundation > workspace > configure web server > make sure planning is selected and is the correct servername, apply and it shoudl reconfigure the apache web server.
You may need to restart the workspace services.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to open Planning application through Workspace

Hi All,
I have Installed and configured the Hyperion products in the following Order
->Foundation services
->Essbase server
->Essbase Administration service
->Planning
->Reporting and Analysis
->Workspace
We know that workspace is a single user interface.
After configuring, I tried to open the Planning Application through workspace but I could not able to find "*Classic Application Administration*" under Administer option of Navigate menu Kindly guide me.
Thanks and Regards
chiDam

You don't need to start downloading weblogic.
Usually the issue is that either the web server has not been configured (this is not weblogic) or the permissions are not correct in shared services e.g. the hss roles of application creator, dimension editor.
You can always try going to create a planning application directly first http://<planningmachine>:8300/HyperionPlanning/AppWizard.jsp
Cheers
John
http://john-goodwin.blogspot.com/

Unable to open Information Map from planning web Help menu

Unable to open Information Map from planning web Help menu
The error is :
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Hi,
It should be accessing :- http://<planning server>:8300/HyperionPlanning/help/en/hp_information_map/hp_information_map.html
Can you access that address on the machine hosting planning?
The file structure on the web server depending on which app server you use should be something like \Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning\help\en\hp_information_map\hp_information_map.html
Cheers
John
http://john-goodwin.blogspot.com/

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

TS3276 i am unable to open web pages from email links on my ipad

I am unable to open web pages from email links on my ipad

A few more details might help, if nobody else recognizes this.
What happens when you try to open the links?
Can you post an example of a link that doesn't work?
Is there any particular source for the mail with the (bad) links, or is mail from all sources failing?
If you happen to know it, what's the format of the mail message? (Maybe the message is an image?)
Do the embedded links work as expected from an OS X system running Mail.app, or some system and some other other mail client?
To view the link in iOS: if you press on and hold your finger on an embedded link in most contexts, iOS will show a pop-up with the link contents, and will offer to copy it. You can use that to acquire and post the link. If pressing and holding on the link doesn't offer the pop-up, the format of the link itself may not be valid, or it might not really be a link.

Unable to open the Projects from Project center with the Alias name PWA 2010

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
3. I have observed one more thing if click on Project details then only this issue is coming project schedule and project information is also opening with Alias name.
can any one Help me.
Vijay kommireddi

Hi
Hope the below link will help you.
And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Unable to open PDF files from Fileserver Content Source using Browser

The situation is this :
A content source was created to search a fileserver
Search facility finds the files using the browser
Able to open MS Office files from the fileserver
Able to open PDF files that are in the Sharepoint Portal
Unable to open PDF files from the Fileserver
Currently using Sharepoint 2010. PDF Filter is installed and configured on the Sharepoint Server
Your assistance is always greatly appreciated.
Have a great day.
NRH

Hello Nate,
I have the necessary access to the folder.
The content source addresses are
\\172.25.136.53\KDrive\Home\Company\DAILYREP
\\172.25.136.53\KDrive\Home\Company\TRINMAR
\\172.25.136.53\KDrive\Process Safety Management
NRH

Since last update, unable to open PDF files from either banking site. The other (IE) works fine but I hate IE. I deleted newer versions and went back to older releases. No help, same thing. Checked settings in options. That is ok. What's up?

Unable to open PDF files from my banking statements.

I think almost every dev is on arch-general, so that is the place to contact the group in general. Specific points can probably be emailed to the dev involved, if one is identifiable and if the bug tracker is not a better place (bug reports to my email get ignored).
I think the whole problem here is that there is really no dev in charge of that package. So your emails were probably seen then skipped over by all devs thinking not my problem... (I know that is true for me). Then Andrea noticed an "orphan" package that needed updated and went ahead with it without connecting it to your previous emails, which is unfortunate.
Now our maintainer backend is fixed, hopefully we can get all the orphan packages adopted out, or at least know if we need to bring on new people to maintain them. That way, there should always be someone who information about specific packages should be sent to.

Unable to view planned order from exceptional summary window

Hello All,
I have ran ASCP plan and it details out the exceptions and recommendations, but I am unable to view planned order from exceptional summary window>recommendations>cilck discrete jobs, no planned orders visible. This issue also shows up for other exceptions, on click of exceptions details it shows up the items but unable to take any actions.
I have tried by giving large no of days to view recommendations in preference.
Can someone help me to reslove issue.
Thanks,
Edited by: user604737 on Jul 18, 2011 6:09 AM

We don't have any query built on the exceptional window. As I am able to view below recommendations
Recommendations
Discrete Jobs 8
Purchase Req 27
When we click on discrete jobs/purchase req, its not showing any planned orders in supply window.
Can you please let me know, which is the backend table which stores supply information which are displayed in exceptional window.
Edited by: user604737 on Jul 18, 2011 9:15 AM

Unable to open KVM's from UCS Console

Unable to open KVM's from UCS KVM Console, Windows 2008 R2 with Java installed try in IE and Firefox, I am able see all KVM's but when I click on KVM it will ask for save or open, saving to disk and opening from disk, directly open not working. Any configuration for IE and Java

Try to Attach the Screenshot here....

HT4489 I'm unable to open vCard exported from MS Outlook for Mac (2011) which adheres all requirements.

I'm unable to open vCard exported from MS Outlook for Mac (2011) which adheres all requirements.

vCards exported from Outlook are not compatible with iCloud if that's what you're trying to import it to. You'll have to do something like create a Gmail account, then export your Outlook contacts to Gmail (see http://office.microsoft.com/en-us/outlook-help/export-outlook-contacts-to-google -gmail-HA001148902.aspx), then export the contacts from Gmail as a vCard (see https://support.google.com/mail/answer/24911?hl=en) and import it to iCloud (see http://support.apple.com/kb/PH3605).

Unable to open HFM application using workspace

I am facing the follwing error after reconfiguration of EPMA from server IP address to server name.
Whenever I try to open the sample application Comma from workspace I get the following error
*"There was some communication error. Response is : http://svctag-hdwft1s:19000/hfm/GlobalWorkspaceNav/bpm/modules/com/hyperion/hfm/web/appcontainer/Adf.asp"*
My HFM is working fine.
"hfm" displayed after i explore the web http://localhost/hfm from IIS
After reading various support links for the above error I tried the following
1. Provisioning done sucessfully for admin as well as other admin users
2. Tried to register it using classic administration. Got the following message
This is a BPMA application. The functionality must be done through BPMA.
3. Reregister from Application Library -
I am able to work with the dimension library and Application Library.
I am able to deploy the application but I am not able to open it.
Please assit on this.

Thanks John.
I have shared services and planning service in different machines (servers)
which one should I reboot.
I checked configuration utility on shared services server.
Foundation, Hyperion shared services and Configure database was showing red.
should I configure my shared services database again, eventhough my shared services is showing in my services list.
thanks a bunch.

Unable to open mp4 files from legato video converter

I converted my hi8 tapes to mp4 files using legato video converter. I am unable to open the mp4 files in adobe premiere 11. Please help

double nn
Thanks for the additional information.
This is what I would like you to try.
Make copies of your present AVCHD.mp4 file. And, then go through the process of renaming the file extension ONLY from:
mp4
to
.mts, m2t, m2ts, .mov, .avi.
Then set up a Premiere Elements 11 new project by
a. Setting your own project preset NTSC DV Standard
To do that, in the Premiere Elements 11 workspace, File Menu/New/Project. Then in the New Project Dialog, set for NTSC DV Standard, making sure that you put a check mark next to "Force this Project setting on this project" before you click OK.
b. Then import your AVCHD.mp4, AVCHD.mts, AVCHD.m2t, AVCHD.m2ts, AVCHD.mov, AVCHD.avi into Premiere Elements 11 with its Add Media feature.
Do any of the files with the different file extensions import?
We will be watching for the outcome.
Thanks.
ATR

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

Unable to open Planning Classic from Workspace

Similar Messages

Maybe you are looking for