Unable to open Power BI Sites - Error: We were unable to load the Site. Refresh the page to try again

Power BI Sites Error
We were unable to load the Site. Refresh the page to try again
When opening Power BI Sites with internet explorer, in certain security configurations you may run into the above error. While we are looking into resolving this, please see the following workaround:
From the Tools menu, select internet options.
On the security tab uncheck the "Enable Protected Mode" checkbox form the relevant Zone (Intranet/Internet)
Remove all entries to *.powerbi.com from trusted sites or/and local intranet sites
On the advanced tab, uncheck the "Enable enhanced protected mode" (if you made a change here it will require a restart of the machine)
Restart and try again (if not changes done in the last step, just restart the browser)

Hi
Any further debugging tips? I upgraded from IE9 to IE11 on my Win7 machine to try get Q&A working, it broke the entire PowerBI site for me

Similar Messages

After rebooting ML server, unable to open active directory. Error msg is Unable to open requested node error -14006.

This active directory is a replica of master on 2nd Mac Mini server which still thinks replica is there (perhaps it is) and will not let us delete in order to recreate. Both servers are running 10.8.4. Nothing changed on either server, simply did a reboot. When we logged in, Active Directory was turned off and when trying to turn on or access received message "Unable to open the requested node. The node LDAPV3/127.0.0.1 could not be opened because of an unexpected error -14006".
Does any one have experience with this and how can we recover? Thanks in advance for your help.

Hi again,
I've been able to run Reports by changing the "Reports_Tmp" key in the Registry under:
Hkey_local_machine\software\oracle\home0\
to the D:\ drive

BCA error Message: (0) Unable to open this document, undefined error

To whom it may concern:
          I am using BO 6.5 and I activate the BCA module. One of my document shows the message "(0) Unable to open this document, undefined error" and no result is generated. Please help me to find out.
Antonio

Dear Sarbhjeet:
        Thank you for your answer but I found that the problematic BCA job does not contain a too-long file or doc name. Finally we found it is the synchronization problem of the universes between repository and the local copy. And, your answer at my another posted question solve it.
        Thank you again!
Antonio

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

TS3297 I Cannot update or purchase from itunes because of this error " We were unable to authorize your payment card for this purchase please update your billing info " this error is beacuse my brother tried to purchase some game worth 38$ which i dont ne

I Cannot update or purchase from itunes because of this error " We were unable to authorize your payment card for this purchase please update your billing info " this error is beacuse my brother tried to purchase some game worth 38$ which i dont need it and i want to report a problem for this issue and able to get update my apps

Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

I am unable to open scanned documents (with .jpg file extension) in my e-mail inbox, on the Mail app on my iPad. Please provide a clear answer. Thanks a lot.

I am unable to open scanned documents (with .jpg file extension) in my e-mail inbox, on the Mail app on my iPad. Please provide a clear answer. Thanks a lot.

Can you actually see that the attachment has a .jpg extension? Some mail systems strip it off (I've seen AOL do that) which makes the attachment difficult to open.

HT3275 I keep getting the "Unable to complete backup. An error occurred while copying files to backup volume. The solution on the website is try try again. Its been trying for 5 days now. Now what? Obviously something else needs to be done.

I'm using an airport extreme and I keep getting the "Unable to complete backup. An error occurred while copying files to backup volume. The solution on the website is try try again. Its been trying for 5 days now. Now what? Obviously something else needs to be done.

Verify the backup.
Is this TM you are using? TM to airport extreme connected hard disk are known to be fragile at best.
A5 http://pondini.org/TM/Troubleshooting.html
make sure the disk is available and online..
But if it is not working.. then you will have to wipe and start again.
http://pondini.org/TM/Airport.html
If this is not TM then also verify the source disk.

Out of Office error: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.'

Hi,
This is my first post in the forums. Please forgive me if it's in the wrong category or if it's not posted correctly in any way.
I'll try and give you below as much information about the problem we have here as I can.
What we have:
- an on-premises Windows 2012 Standard server that is the PDC, DNS and DHCP server;
- a second Windows 2012 Standard server with the sole purpose of hosting our Exchange 2013 CU7 server;
- Windows 7 PCs with Office Home and Business 2010 v.14.0.7143.5000 (32-bit);
- Outlook 2010 connects through Outlook Anywhere (mail.ourdomain.com).
The problem:
If trying to set up Out of Office through Outlook on the client PCs, we'd get an error message: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.' Interestingly, it does work normally for some users.
It works fine for all users if done through OWA.
Tests performed:
User 1 on PC1 has the problem. User 2 on PC2 doesn't have the problem. Both users are members of the same security groups.
- setting up User 2 on PC 1: the problem exists;
- setting up User 1 on PC 2: the problem exists;
- setting up a second Outlook profile on PC2 within User 2's domain account (the one that works), for the same User 2: the problem still exists!
I haven't been able to set up an Outlook account that works since this issue was discovered, although there are existing Outlook accounts that do not have the issue.
Let me also point out we have another issue we are working on and which may or may not be related: the Autodiscover function in Outlook doesn't work. Test E-mail AutoConfiguration results in 'Autoconfiguration was unable to determine your settings!'.
I can see postings in the Internet of other people having the same problem with OoO, but couldn't see a solution that fits my case: some existing accounts in Outlook are fine, other are not and newly created profiles of aforementioned working accounts do not
work. The majority of the articles/threads I read suggest recreating the Virtual Directories in Exchange, but we did that just a month ago (when troubleshooting the Autodiscover problem) and besides if the problem is in the Virtual Directories, I would expect
it to affect all accounts.
Any help in resolving this problem would be greatly appreciated. Please let me know if you need other details.
Apologies if the posting is not in the right place or not done properly - I'm still learning.

The IIS log files on the CAS might tell you something. Depending on how your proxy server handles NAT the IP address of your connection might be from the proxy server instead of your client.
In any case, a tool like Fiddler (http://www.telerik.com/fiddler) can be extremely helpful in working on problems like this because it can decode the SSL traffic on the client and you can see what's being sent
and what's being received.
Another thing to check (although it's unlikely to be your case) is whether or not your browser (when you try connecting to the autodiscover URL) thinks it's in the "Internet" zone. the "Local intranet", or at a "Trusted" site.
The domain names you use on machines on your LAN should be excluded from being proxyed. Anything with "." in the name will be set, unless excluded, to the proxy server.
Is the time correct on the client machine? Is it more than 5 minutes different to the Exchange machines and domain controllers? That'd be something that would cause Kerberos to fail.
A certificate can be a problem if its expired or if it doesn't have the correct names. But I wouldn't worry about the uglog.com domain just yet. Until you get the Autodiscover working with the SCP you have bigger problems.
If you've never used a WPAD file then don't worry about it. It's very useful if you have a complex network and you want to manage how browsers connect to servers. For example, if you have multiple proxy servers the each manage a different set of names, an/or
if some names should bypass proxy servers entirely and just connect directly. If run a strictly Microsoft network with only Microsoft product that you can manage with GPOs (and you can enforce those GPOs on every machine -- even the BYOD ones) you probably
don't need a WPAD.
--- Rich Matheisen MCSE&I, Exchange MVP

Tried installing latest iTunes (10.5.3.3). During installation received error message asking to verify access to "C:\Config.Msi\187e500.rbf". The only option it gives is "try again" or "cancel". No choice but to cancel installation. Any suggestions?

The problem started when my current iTunes kept popping up a window stating that my Auto Run was turned off. (which means iTunes will not be able to recognize when a CD is inserted or ejected). It asked if I wanted iTunes to run Auto Run and I select Yes every time (this window pops up every time I open my iTunes), but a second window pops up stating iTunes cannot turn on my Auto Run setting (but it will still be able to recognize CDs) to which I choose okay. A third window pops up after stating that iTunes was not properly installed and if I wish to import or burn CDs I need to re-install iTunes, except that I can import CDs since I did this only yesterday and this problem has been going on at least a month.
To add to this, I cannot cannot automatically update to version 10.5.3. (I don't recall which problem came first, my Auto Run problem or the fact that my iTunes can't update). iTunes suggested that I manually install the update, so I went to the apple site and tried manually installing the latest iTunes (10.5.3). However, during the installation process I received an error message. It asked me to verify access to "C:\Config.Msi\187e500.rbf". The only option it gives is "try again" or "cancel". I tried hitting Try again a few times but the same error message popped up, so I had no choice but to cancel the installation. Afterwards, I tried searching in my C drive but could not find "C:\Config.Msi\187e500.rbf"
Does anyone have any suggestions how I can update my iTunes?

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

Unable to connect to the selected mobile data service, please try again later. If the problem persists please contact your administrator

Since last week or 2 weeks ago, some of our users (both Batam and Singapore) here encountered a problem where they are not able to browse the Internet on their BB as they used to.
Example :
I did a test to browse on their BB
www.cnn.com
they will see below error:
“Unable to connect to the selected mobile data service, please try again later.
If the problem persists please contact your administrator “
However if we use ‘Google’ or ‘Yahoo’ search on the BB and entered ‘CNN’ and run a search on it.
We are able to open the CNN website – from the link result search by Yahoo or Google
It’s also applicable to other websites too.
Any idea?

Hi thatemailguy,
Are the users on a BlackBerry Enterprise Server?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Why am I seeing this message when I try to access my Creative Cloud account - 'We are unable to load all your plans & products. Please try again.'

Why am I seeing this message when I try to access my Creative Cloud account:
'We are unable to load all your plans & products. Please try again.'
I want to see which products are included with my CC subscription - e.g. do I have a Prosite portfolio website or would I need to pay for an additional subscription?
Is this a temporary site issue or an on-going problem?

Please refer here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Regards
Rajshree

How to resolve error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again."

I inadvertently deleted my iPhone backup on my MacBook Pro. I restored iPhone to factory settings and then synced remotely with iCloud. However the error message repeatedly states:
iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again.
Any ideas as to how this can be resolved please. Thank you very much.

My wife's iPhone 5 would not backup, after upgrading to iOS 8.     The "genius" at the Apple store succeeded in DELETING, the only recent backup of her phone so
recovery became more critical.
I followed all the procedures for troubleshooting it, but still it would try to backup and then stop due to an error. We particularly wanted to preserve some game data/history/progress that she'd been working on for years.      This game (Dream Fish) would no longer open after the iOS 8 upgrade ... and the phone would not successfully backup, and so we had no confidence that it would restore from an older backup either.       I googled for solution and found Phoneview and iFunBox.      These apps allow you to see & access data files in the iPhone.      Phoneview was too fragile and crashed when copying a file any size.
I found "iFunBox".     iFunBox was excellent.      I used iFunBox to recover her game data.    It allows you to make a copy of data files that reside on the iPhone... and store them as a manual backup on the Mac.
And in the process I found 2 games that caused iFunBox to crash.      The 2 games in question were not important enough to try to keep, so I deleted them from the iPhone.
So then, I had a manual backup of the important iPhone data, and had eliminated two game files that apparently had a conflict with iOS 8.
My next Backup attempt was successful.        The iPhone with iOS 8 would now backup to both the Mac and to the Cloud.
Next I deleted Dream Fish from the iPhone and downloaded a fresh version from the Cloud.    The new Dream Fish with no history opened in iOS 8.
Then I used iFunBox to copy my wife's Dream Fish data history from the Mac back into the new game.
Once the transfer was complete, Dream Fish would now OPEN and all of her progress was there and working like normal.
Hope this helps.

I received this error: "iTunes could not connect to the iTunes Store. An unknown error occurred (-3212). Make sure your network connection is active and try again." We are connected. Any ideas on how to solve this?

I downloaded iTunes. I was going to put an MP3 lecture on iTunes so I could put it on our new iPad but I got the message:
"iTunes could not connect to the iTunes store. An unknown error occurred (-3212). Make sure your network connection is active and try again." I was able to get on this site so I know the connection is fine. Any ideas how to fix this?
Thanks.

Hello Buck
If you are having issues with the iTunes store, check out the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for using Apple Support Communities.
Regards,
-Norm G.

"Unable to connect to the BlackBerry ID server. Please try again. (50500)"

We have a user that is continually getting asked to verify his blackberry ID. Whenever the device turns on, tries to access apps etc.
Whenever he types in his correct Blackberry ID details (verified as we are able to login at http://au.blackberry.com/bbid.html without any issues, both on PC and from the devices browser itself) we are met with the following error;
Unable to connect to the BlackBerry ID server. Please try again. (50500)
We have tried nearly every possible way to get around this, tried seperate BBID's (none work), different networks, resetting passwords, clearing browser cache, removing wifi networks, battery pulls etc etc. We were resigned to the fact that the device would have to be wiped however we cant even connect it to Link to take a backup without it saying "please sign in with your blackberry id on your device" within the Link window in order to backup certain stuff.
Can anyone recommend anything we can do to either fix this issue, or try and allow us to take a full backup - (note; we have already tried disabling all networks on the device and no internet connectivity on the PC its connected to and trying to run a backup as well but to no avail).

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB33916 "Unable to connect to the BlackBerry ID Server (50500)" is displayed when attempting to change the BlackBerry ID Password or Recovery Question on the BlackBerry 10 smartphone
Unfortunately, it has nothing useful (except for at least knowing that BB knows of the issue).
You might try some of the things from this "sticky" post:
http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
Otherwise, you might need to ring up your mobile service provider and convince them to escalate you to formal BlackBerry support.
Good luck and let us know!
VIA | sdgardne
http://supportforums.blackberry.com/t5/BlackBerry-Q5/Connection-id-Error-50500/m-p/2592423/highlight...
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

I make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

i make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

Those are the instructions for your computer's iTunes (i.e. using the Store menu at the top of your computer's iTunes and selecting 'View My Account' on it). If you are doing it on your iPad then are you following the instructions for iOS devices :
To unhide your purchases
Depending on the content type, open the App Store, iBooks, or iTunes Store on your device.
Scroll to the bottom of the main page.
If you're not already signed in, tap Sign In.
Tap your Apple ID name, then tap View Account.
Scroll down on the Account pane, and tap Hidden Purchases.
Locate the item you would like to unhide then tap the Unhide button.

Unable to open Power BI Sites - Error: We were unable to load the Site. Refresh the page to try again

Similar Messages

Maybe you are looking for