Unable to Open Query Designer

Hi All,
I'm trying to open a query in query designer .... after selecting the query and click on Open .... I'm receiving a message "This componet was edited with more recent version of a editor. You also have to use the more recent version to edit further Further processing is not possible. Update your front end"
I know I need to upgrade ... please advise and me on this .... I noticed SAP Service market place ... I can't find one.
TQ
Nathan Ranj

Hi,
If you open the BW 3.5 query in BI 7.0 front end and again if you try to open this in BW 3.5 this error may arrive.
Please let me know youa re using both front end tool for reporting.
Regards,
Vishwa.

Similar Messages

  • Unable to open query designer while able to access BI system

    Hi Experts,
       I have problem while opening query designer, analyzer , WAD . I get the below error. But when i access the relevant BI system i am able to access it well , i dont get any RFC Error. Will there any port setting for query designer separately. This is problem faced at offshore which connects to client servers at onsite. Onsite guys are not facing any issues openning query designer or analyser. Please guide as i am not good in basis ..
    RFC_ERROR_COMMUNICATION
    Message
    CMALLC : rc=27 > Connect from SAP gateway to RFC server failed
    Connect_PM  GWHOST=163.164.XX.XXX, GWSERV=sapgw00, SYSNR=00
    LOCATION    SAP-Gateway on host XXXXXXX/ sapgw00
    ERROR       timeout during allocate
    TIME        Mon Sep 12 14:20:38 201
    RELEASE     700
    COMPONENT   SAP-Gateway
    VERSION     2
    RC          242
    MODULE      gwr3cpic.c
    LINE        2066
    DETAIL      no connect of TP sapdp00 from host 163.164.XX.XXX, after 20 sec
    Thanks
    Vamsi
    Edited by: vamsi talluri on Sep 14, 2011 6:57 PM

    Hi Experts,
       I have checked with basis team , my issue is resolved, please find the solution .
    1) Add corresponding system server names in host files of the offshore desktops.
    2) After that basis has added offshore natted ips in sap gatewat parameter/alternate hostnames in system profile (rz10 tcode).
    Then offshore are able to access query deisgner etc....
    Regards
    vamsi

  • Unable to access Query Designer with RRMX.

    I have intalled Sap GUI 7.0. I am able to run all applications vai Link : START -> ALL PROGRAMES -> BUSINESS EXPLORER -> QUERY DESIGNER.
    But when i try opening query designer from my logon pad with transaction RRMX, the query designer does not work.Kindly guide on the issue.

    You can start the BEx Query Designer using one of the following options:
    ●      Standalone, by choosing Start ® Programs ® Business Explorer ® Query Designer.
    ●      BEx Web Application Designer:
    In the menu bar of the Web Application Designer, you have chosen Extras  ® BEx Query Designer.
    ●      BEx Analyzer:
    You are in an empty cell and have chosen Extras ® Define New Query in the analysis toolbar.
    ●      BEx Report Designer:
    In the menu bar of the Report Designer, you have chosen Extras ® BEx Query Designer.

  • Error when open query designer

    Hi people when i try to open query designer on my dev system i have some message. In the query designer appears two STOP error that tell to me ther's a dump in system. On system on st22 the dump is this:
    Errore run-time        RAISE_EXCEPTION                                                            
    Data e ora             29.05.2007 15:25:52                                                                               
    Testo breve                                                                               
    Exception condition "RFC_FUNCTION_NOT_FOUND" raised.                                                                               
    Causa dell'errore                                                                               
    The current ABAP/4 program encountered an unexpected                                         
         situation.                                                                               
    Possibili soluzioni                                                                               
    Note down which actions and inputs caused the error.                                                                               
    To process the problem further, contact you SAP system                                       
         administrator.                                                                               
    Using Transaction ST22 for ABAP Dump Analysis, you can look                                  
         at and manage termination messages, and you can also                                         
         keep them for a long time.                                                                               
    Analisi errori                                                                               
    A RAISE statement in the program "SAPLTREX_EXT_ADMINISTRATION" raised the                    
          exception                                                                               
    condition "RFC_FUNCTION_NOT_FOUND".                                                          
         Since the exception was not intercepted by a superior                                        
         program, processing was terminated.                                                                               
    I try to search some oss but i can't find solution

    <FONT FACE = "Tahoma", Font Color = "Blue">
    Hi<br>
    If you are getting the same problem while opening queries on other systems like Quality and Prod, then I think it must be your Frontend installation problem.<br>
    Please re-install the Business Explorer.<br>
    However if the problem is occuring only when you work in Development, then please take help from your BASIS Team. There must be some RFC setting issue which BASIS would be able to resolve with your help.
    <br><br>
    Hope it helps.<br><br>
    Cheers Abhijit<br>
    </FONT><FONT FACE = "Verdana", Font Color = "Red">
    It's a good habit to reward someone with points in SDN if you think his/her
    response was helpful to you
    </FONT>

  • Unable to open Query in Bex Analyzer

    Hi All,
    I am unable to open query in BEx Analyzer though i am able to open it in RSRT.It gives me no error,as soon as i open query it shows processing then nothing happens.No selection screen nothing,no error also.
    Any pop up something like that  which is blocking the execution of Query??And its in production system,so its pretty urgent.

    Hi,
    RSRT works while Analyzer doesn't. I would check it from the authorizations/roles point of view.
    Some time ago I saw similiar error - due to lack of some rights the user was unable to run a query.
    After I looked into the data provider definition I saw nothing there. My (admin) rights were good enough to run the query and see the data.
    The user had no rights to read some infoprovider data. After granting the rights he could run the query.
    Regards. Leszek

  • Unable to run Query Designer

    Dear All,
    I am not able to open Query disigner in BI.
    We had Bex for Bw.
    If I open BW then Query Designer is working.
    I am using BI so I am not able to open Query Designer.
    Is there difference in the version of Bex for BW and BI.
    How can I get Bex for BI
    Please help me...
    Regards,
    MK.................

    Hi,
    Which version of GUI are you using , This might be a version issue ,
    what error message are you getting ,
    you may need to update your GUI,
    did you try through start menu--> business explorer --> Analyzer rather than usring RRMX .
    Let me know this much information to assist you further.
    Thanks
    Sukhi

  • Unable to Open Query

    Hello,
      I have a user that is unable to open a query using the BEx Analyzer.  The user is able to refresh workbooks, but cannot open queries using the Business Explorer Menu..  When selecting a query, the screen goes blank.  I have tried this user's ID on my computer and it still does not work.  We are running BEx 3.5.
    Any help would be greatly appreciated.
    Thanks!
    Tina

    It could be either or both. SAP BW has two, and potentially three, levels of security.
    1) There could be custom Authorization Objects created to limit access to authorization-relevant InfoObjects. Any
    InfoProvider where an authorization-relevant InfoObject exists will invoke this security.
    2) BEx has some Authorization Objects required in order to do particular functions within the tools. Also, there are activities (e.g. create, read, modify, etc) that are associated to the objects.
    3) If you're using the SAP BI Portal or SAP Enterprose Portal for your reporting, it has it's own set of Authorization Objects because you can setup tabs whereby you can restrict who can view specific tabs. For example, you can have a tab for Labor reports in your portal where only a select few people can even execute the reports. This would be desirous even though the data is security and the report would come back with no data.

  • Error when opening Query Designer

    I keep getting an error when I open up query designer and hit on open query.  the error is bexopensaveservices -get nodes:RFC exception.  any ideas on how to fix?  Basis says my RFC connections are fine

    Hi,
    We are facing the same issue for Query Designer .When opening a query, we get the following error :"Terminate:Unexpected Error:BExOpenSaveServices - GetNodes:RFC Exception".
    As usual, Basis folks say, RFC connections are fine.
    Not sure of the main problem.Can any one tell me , whats the solution for the same.
    FYI, I have SAP_ALL authorizations and I think, for my user id , authorization is not a problem.
    Regards,
    Kumar

  • Rfc error while opening query designer

    installed sap gui 7.20 on my system to access sap ecc or BI.
    now my issue is while opening bex query designer of BI. it prompts me
    Error Group
    RFC_ERROR_PROGRAM
    Message
    Ent
    please suggest me what actions to be taken

    hi deepak and markus,
    evarything is doing well.. i am to operate ECC and BI. i can navigate through all the screens
    but the problem is i am not able to use query designer..even through query analyzer i am not able to navigate to query designer.
    pls suggest me whether i have to do any modification after installing GUI
    while executing rrmx in BI system it prompts me with status message as "please install excel as viewer"
    the other thing i found is that applicaton server is working in past date..and i tried it by changing it to application server date.but still i face the same proble..
    Edited by: satishchow on Dec 6, 2011 1:16 PM

  • Unable to open LifeCycle Designer in Netweaver Developer Studio

    I was trying to work on SAP interactive forms by Adobe.
    1.I have installed SAP NetWeaver Developer Studio Version: 7.0.09
    2.I have installed Adobe LiveCycle Designer ES 8.1
    3. I have Adobe Reader 7.0.
    Now when I am editing the interactive form from NWDS, it says "Could not find the required product, Install SAP Interactive Forms - Adobe Live cycle designer to edit the Interactive Form"
    Have I missed some additional settings after the installation? And is there anything to do with the versions?

    Hi Lien,
    I'm too facing same issue.
    My softwares have following versions:-
    1. Adobe Livecycle Designer ES 8.2  (Downloaded from Link: [here|http://www.adobe.com/cfusion/tdrc/index.cfm?product=livecycle_designer] )
    2. SAP Netweaver Developer Studio 7.0.15
    What version you are having?
    Your issue resolved after reinstalling NWDS?
    Thanks and regards,
    Amey Mogare
    Edited by: Amey Mogare on Jul 16, 2009 8:53 AM

  • Unable to find my InfoArea in Query Designer

    Hi all,
    Iu2019ve created an InfoObjectCatalog, InfoArea, DSO and an InfoCube. The data source, transformation,DTPs are all active and the flat file is loaded into the cube. I've the data also in the cube. I want to create a query out this cube that I created. But when I open query designer and look for my info area, I donu2019t find it. I searched for Info Area in Find but it says u2018No objects foundu2019. I can't find any of the objects i.e. either the cube or the Info Area.
    My question is why canu2019t find any of the objects that I created inspite of all the objects being active? How do I locate my objects in Query Designer that I created in BI backend?
    Please advise.
    Thank you.
    TR.

    Hi,
    You need to create the Query first to Find the Info Area (relevant to that Query)
    You can search the Info Area Manually (if you dont have Query also) provided You need to say New at Query designer Standard Menu.
    Hope it helps

  • BEx Query Designer Opening Problem

    Hi Guys,
    I am working on BI 7.0. My system OS is Windows XP. When i try to open Query Designer it showing an as below.
    Component 'BEx Query Designer': available version 154, version 229 required.
    Before you can continue you have to run the front-end setup.
    please let me know to resolve this issue.
    Thanks
    Murali

    Hi Murali,
    To make sure it works, you should make sure that:
    When you installed the SAP GUI, you have checked the BI option (in addition to the BW option)
    Install the latest front end patch (BI patch 7) from SAP Marketplace
    I highly recommand to also install the BI SP07 patch for the server - it adds lots of stability for the front end.
    It works pretty well for us, I am sure you will also eventually make it work
    hope this solves ur problem....
    Regards,
    Bala...

  • Need transaction code for opening Bex query designer?

    Hi ALL,
      Can anyone help me with the transaction code for opening Bex query designer?
      Like RRMX for Bex Analyzer similarly i want for Bex query designer.
    Thanks & Regards
    Sameer Khan

    THERE IS NO TCODE FOR QUERY DESIGNER. BUT THERE IS AN ALTERNATIVE..
    OPEN BEX ANALYSER THROUGH RRMX
    OPEN A QUERY
    CLICK ON TOOLS-> EDIT QUERY
    THIS OPENS QUERY DESIGNER AND YOU CAN USE IT NORMALLY..

  • Unable to Create Instance of Essbase Query Designer

    followed by Unable to Initialize Query Designer.Essbase v6.1Excel 97 sp2 iWin NT 4 sp5We are running into this error when trying to launch query designer."Unable to Create Instance of Essbase Query Designer"Query designer is checked in the addins before we try running it. We receive the messages. If we check the addins after we get the messages, query designer is unchecked.The Essbase addin works fine with no issues. Any thoughts on what this might be or how to troubleshoot it?Thanks.Mike

    Update: is it possible that security rights to the Essbase directory would affect the Query Designer? On a machine that it works on, I've noticed that the "xla" file updates each time it is accessed.

  • BEx: In Query Design I can't EXPAND Dim to select Char (missing + sign)

    Hi,
    I am in BI 7, but created some queries in RRMX i.e. the 3.x query designer.
    I went back to create a new query and I see my InfoArea but no means to expand it to select a cube, missing + sign and I can't expand the InfoArea.
    When I managed to open one of the old queries, in the query design, I see my design but all the Dimensions are missing the + sign and I can't expand them to select characteristics;
    In the same token, I can't expand the KEY Figure tree to select key figures, etc.
    Any help?

    Hello Amanda,
        1) a   There is no such rule as when to use query designer or analyzer. Essentially creating a query is done in query designer only. The only thing when using analyser to open query designer is that you can directly go to that query and change it and run the same in the analyser(Excel). To change a query when you directly go to query designer, you need to open the query manually using the "open query" button and you cant execute the report in excel from there(only web). As you can see there is no real difference, in my personal experience using query designer and then running the query on the web is much faster than using the analyser. Also excel has a limit of 65536 rows after which you cant really display the result. There is no such limit in the web analyser.
            b) Report designer is just for creating reports that look good when they are printed basically. You can refer the following link for more info.[http://help.sap.com/saphelp_nw70/helpdata/en/43/5fc0680a876b7de10000000a422035/frameset.htm]
    2)      There may be a problem with maybe the patch level or something. No real idea why this is occuring. You can definitely open the report in excel using the BI7 analyser. Programs -> Business explorer ->Analyzer.
    Regards.

Maybe you are looking for