Unable to open Query in Bex Analyzer

Hi All,
I am unable to open query in BEx Analyzer though i am able to open it in RSRT.It gives me no error,as soon as i open query it shows processing then nothing happens.No selection screen nothing,no error also.
Any pop up something like that which is blocking the execution of Query??And its in production system,so its pretty urgent.

Hi,
RSRT works while Analyzer doesn't. I would check it from the authorizations/roles point of view.
Some time ago I saw similiar error - due to lack of some rights the user was unable to run a query.
After I looked into the data provider definition I saw nothing there. My (admin) rights were good enough to run the query and see the data.
The user had no rights to read some infoprovider data. After granting the rights he could run the query.
Regards. Leszek

Similar Messages

Error when opening query in BEx Analyzer BI7

Hi all,
I get the following error when I open a query in the Analyzer.
Unable to convert character set 4103 to character set 4103. possible.
Afterwards it closes the connection.
Any help will be appreciated.
Cheers,
Meurant.

Hi Meurant,
Most likely it is a mismatch between your Client GUI and sever.eps
The following steps helped in some cases.
1) Uninstall the SAP GUI on your m/c.
2) Upgrade all you operating system patches to the required level...If it's Windows XP.....just
get the latest updates from Microsoft.
3) Re-install GUI for 7.0
Good luck, BB

Unable to access query in Bex Analyzer

Dear All,
Could you please help us as we are getting No authorization error in Bex Analyzer when we are trying to view the query. We can access the query in RSRT using USERID for Execute as others. When we try the same query and with same userID in Bex Analyzer we are getting the error No authorization. We are on BI 7.3. Please let me know in case you need more information
Thanks and Regards,
Jyoti Arya

Hi,
please get required approrvals from client or business team.
Later seek basis or security team help to get required authorizations.
Thanks

Error Message while opening workbook or Query in BEx Analyzer

Hi all,
Whenever I try to open any workbook or query using Bex Analyzer I get an error message saying "Serious error occured while reading history folder" Message class RSOBJS, number 170. But this doesnt stop me from opening the workbook or the query.
Kindly help me to suppress or eliminate this message. I am not able to find this message in the list of messages available in RSRT either.
Thanks and Regards
Mui Kanva

Hi Mui Kanva,
Does your problem occur in a copied system?
I have same problem in our Quality-BW (copied from productive system). WE are in our QBW not able to activate personalization correct and get the same error messages. I suggest the reason in the fact, that the source-system Myself (QBW) does not work correct. This reason causes that export data sources could not be activated via RFC-Connection.
Please check to activate your source system?
We accept the error messages in our QBW and did not activate the RFC connection.
Regards
Andreas

Error in running query in Bex Analyzer

Hi All,
I faced some problem in running the query in Bex Analyzer, when I run
the query in the Bex Analyzer, there are error messages indicates that
the query is fail to load. Before that all the query can be run without any problem.
The details for one of the error msg are as follows:
Diagnosis
Variable 0P_MATBK has the processing type "Manual Input/Default Value".
However, it is not input ready, and no default value has been specified.
System Response
Procedure
Make the variable input ready or specify a default value.
Procedure for System Administration
Any1 can help? Thanks.

Take a look at this link...
http://help.sap.com/saphelp_nw04/helpdata/en/55/589b3c494d8e15e10000000a114084/content.htm
For the variable wizard...
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/content.htm
To make it Ready for Input...
In the variable properties window, Check "Ready for Input".
Message was edited by:
Jerome

BW Server Error when running Query in BEx Analyzer

Hi All,
We are currently trying to run a custom Consolidation query in Bex Analyzer but coming across this error below.
We are on BI 7.0 (SAP NetWeaver 2004s), BEx Analyzer 2004s Release, Support Pack 9, Patch 4, Revision 372.
This error message is only occuring for certain custom consolidation queries and not all and does not occur for standard queries.
Does anyone have any advice?
Cheers,
Wiki
ERROR MESSAGE
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program CL_RSR_RRK0_SELECTION and form COLLECT_CHAFIX-02-(see long...)
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

Hi Wiki,
I am running into this error also. You marked the question as answered, did you apply the notes or did you find any alternate solutions?
Thanks,
Vedant

Getting below error while opening query in bex 3.5x

Dear Guru's
I am getting below error while opening query in bex 3.5x
The following object were not found when accesing the server .
Press repair to correct the problem (included parts of query deleted) press cancel to undo the last action.
Regards
Karan

Hi,
1) When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
2) so create an authorization object for each of these attributes with * (full authorization)
Regards,
Marasa.

Iam Facing an error whenever i run a query in Bex Analyzer

Hi All,
Whenever i run the query in bex Analyzer iam facing an error as
*Error reading the data of infoprovider*
*Error in BW :error creating Index*
*Enter an rfc destination*
*The following error occured during parallel processing of query 67.* Please anyone help me on this.
Thanks & Regards
Sameer Khan

Hi Sameer,
There could be several reasons for this error. Based on the first message you got
*Error reading the data of infoprovider*
Please check that you have the requisite authorizations to execute queries on this infoprovider
Naresh

Problem opening a query in BEx Analyzer 7.10

Hello,
we have problems with the BEx Analyzer, an empty screen is
displayed when we open a query.
I'm going to explain the steps:
We open Analyzer, goto open query, logon into BW window appears and then, before the screen to select query from an Infoarea, roles, etc is load, the Analyzer seems to open the SAP Logon and an empty screen from R/3 appears.
We can not close this R/3 empty window, only when we close the Analyzer this windows is closed.
The problem happens with the SAP GUI 6.40, so we updated to
SAP GUI 7.10, installed patches, addons and windows/ office
patches but the problem persists.
How can we solve this issue?
Thanks in advanced.
Best regards,

Yes, I have done all the installations that the notes said and the pre-requisites:
- Microsoft .NET Framework 1.1 + .NET Framework 1.1 SP1 + Hotfixes and windows update + Microsoft Visual J# .NET Framework 1.1.
- Microsoft .NET Framework 2.0 + .NET Framework 2.0 SP1 + Hotfixes and windows update + Microsoft Visual J# .NET Framework 2.0.
- Microsoft Officce 2003 patches (KB907417, KB945185) + Office 2003 SP3
- bi710sp03_300 and bi710sp04_400
- gui710_6-10002995.exe and kw710_1-10004321.exe
But the problem persist.
I have executed BI Frontend installation check tool (sapbexc710.xla) and seems everything is OK.
Regards,

Problem in opening a query in BEX analyzer..

i am using front end sap gui 7.20 with patch 9..
my issue is that when i tried to open a query in bex analayzer. i get following error stating that
you donot have suffiecent authorizations for the infoprovider XXXXXX
function module /SDF/AL_MAP_TRANSID_LOGH does not exist
and i tried to open a query from bex query designer ..i am not able execute it
and i get strange error while executing tcode rrmx..the status error states that microsoft excel is not installed, install microsoft excel viewer
after installing microsoft excel viewer also..i get the same error...
pls suggest asap guys

Hi Satish,
You can ask yur tech support team to install sap gui and in specify them to tick "SAP BW add ons".
also Enable the macros for the analyser.
Regards
Rahul

Unable to Open Query

Hello,
I have a user that is unable to open a query using the BEx Analyzer. The user is able to refresh workbooks, but cannot open queries using the Business Explorer Menu.. When selecting a query, the screen goes blank. I have tried this user's ID on my computer and it still does not work. We are running BEx 3.5.
Any help would be greatly appreciated.
Thanks!
Tina

It could be either or both. SAP BW has two, and potentially three, levels of security.
1) There could be custom Authorization Objects created to limit access to authorization-relevant InfoObjects. Any
InfoProvider where an authorization-relevant InfoObject exists will invoke this security.
2) BEx has some Authorization Objects required in order to do particular functions within the tools. Also, there are activities (e.g. create, read, modify, etc) that are associated to the objects.
3) If you're using the SAP BI Portal or SAP Enterprose Portal for your reporting, it has it's own set of Authorization Objects because you can setup tabs whereby you can restrict who can view specific tabs. For example, you can have a tab for Labor reports in your portal where only a select few people can even execute the reports. This would be desirous even though the data is security and the report would come back with no data.

Opening queries in BEx Analyzer

Hi,
We have a new SAP BW installation. When we try to open a query from the BEx Browser, it is opened with an Internet Browser instead of BEx Analyzer. The same occurs if we try to open it from the Favorites menu in the administrator workbench.
Does anybody know where we can change the setting so that the queries open in Excel?
Thanks very much,
Ana

Hi,
You define the standard Web template in the SAP Reference IMG->Business Information Warehouse->Reporting-Relevant Settings.
check this may be it suits ur need
http://help.sap.com/saphelp_nw04/helpdata/en/26/6de53cce129749893b008c627ede07/content.htm
Regards-
Siddhu
Message was edited by: sidhartha

Cannot open Query through BEX

Hi all,
I am on BW 3.5.
I have a wierd problem when I try to open a query through BEx;
as the variable entry screen comes up after I have selected a query, I can see the last opened workbook behind it.
Then after I continue with the query putting in whatever options, the workbook opens.
If I refresh, it tries to refresh the workbook, and there is no sign of the query.
If I log on using a collegues user, BEx works as normal so, it must be down to the user settings or authorisations!!!
Has anyone experienced this before.
Thanks,
Shane.

Hi Suraj,
If you want to execue your query, you can use the bex analyzer.
If you are opening the query from query designer 3.x query in 7.0 fronend, it will get upgraded and then cannot be reveted.
In your case this automatic migration might be havng some issues, owing to complexities.
Please recheck.
-Vikram

Unable to open query designer while able to access BI system

Hi Experts,
   I have problem while opening query designer, analyzer , WAD . I get the below error. But when i access the relevant BI system i am able to access it well , i dont get any RFC Error. Will there any port setting for query designer separately. This is problem faced at offshore which connects to client servers at onsite. Onsite guys are not facing any issues openning query designer or analyser. Please guide as i am not good in basis ..
RFC_ERROR_COMMUNICATION
Message
CMALLC : rc=27 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=163.164.XX.XXX, GWSERV=sapgw00, SYSNR=00
LOCATION    SAP-Gateway on host XXXXXXX/ sapgw00
ERROR       timeout during allocate
TIME        Mon Sep 12 14:20:38 201
RELEASE     700
COMPONENT   SAP-Gateway
VERSION     2
RC          242
MODULE      gwr3cpic.c
LINE        2066
DETAIL      no connect of TP sapdp00 from host 163.164.XX.XXX, after 20 sec
Thanks
Vamsi
Edited by: vamsi talluri on Sep 14, 2011 6:57 PM

Hi Experts,
   I have checked with basis team , my issue is resolved, please find the solution .
1) Add corresponding system server names in host files of the offshore desktops.
2) After that basis has added offshore natted ips in sap gatewat parameter/alternate hostnames in system profile (rz10 tcode).
Then offshore are able to access query deisgner etc....
Regards
vamsi

Infoset query in BEx analyzer

Hello,
we have a query on an infoset based on an infocube and infoobject. When running the query directly in web, the data is shown. When we run the query in BEx, we get "No applicable data found" . Is there some setting we forgot or are there issues with Infosets and BEx?
Thanks!

Hello,
Try to run the query with transaction RSRT2.
Probably youwill experiencing the same message error.
Porbably you are using different users, with different roles/authorization.
Associate SAP_ALL and BI_ALL for the affected user. If works, there is something wrong with the user's roles.
If the issue remains, open a message to BW-BEX-OT-OLAP component.
Best regards,
Edward John

Unable to open Query in Bex Analyzer

Similar Messages

Maybe you are looking for