Unable to open Raw files from Nikon D800 in Photoshop CC [was:raw updates with creative cloud?]

i have a d800, bridge or photoshop do not seem to support the raw files, i am using CC and bridge will not bring up the thumbnails and photoshop will not open the files at all, can anyone help?

[Moved from Cloud forum to Camera Raw forum]
ACR = Adobe Camera Raw.
ACR is the plugin used by Photoshop to read and process Raw files from cameras. It must be updated every time a new camera comes on to the market.
The Nikon D800 has been fully supported since ACR7.1
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
ACR7.1 is compatible with Photoshop CS6 and later
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
So, if you are in fact using Photoshop CC, there should be no reason that Raw files cannot be opened.
In Photoshop, click:
Windows: Help > About Plug-In > Camera Raw
Mac: Photoshop > About Plug-In > Camera Raw
Which version number is shown?
Are you using Nikon transfer software to get the Raw files from your camera to your computer?

Similar Messages

Unable to read net files from Nikon D800

purchased Nikon D800
have cs5
updated Adobe manager as suggested
closed all adobe products
Tried installing Adobe patch installer- Adobe 7.1 update,
Update Failed- not applicable for me
Still cannot read NEF files,
I would like to read NEF files from Nikon D800 in bridge and photoshop.
Any suggestions?
Thank you
Karla Chouhan

The D800 is supported in Camera Raw 7.1 and higher
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
CS5 is not compatible with Camera Raw 7 and higher. You need CS6 (paid for upgrade or join the Adobe Cloud).
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Or stay with CS5 and use the free DNG converter to convert all D800 Raw files to DNG then edit the DNGs in Bridge and Photoshop
http://www.adobe.com/products/photoshop/extend.displayTab2.html

Opening NEF file from Nikon D7100 i Photoshop Elements 11, problem.

Hi
Photoshop Element no. 11 do not open NEF file from Nikon D7100.
Versjon of element: Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
Pleas help me.
Martin Høegh

How do I update Adobe Bridge CS4 so that I can view NEF files?
Unfortunately, you don't. Bridge can never be updated again once a new version of Creative Suite comes out, so bridge CS4 can't be updated past where it was back when CS5 came out. There is no way to make bridge CS4 see the raw files for the D7100, I'm afraid.

Can't open raw files from Nikon d800 in PS CS5 and can't update Camera Raw plug-ins

Can't open raw files from Nikon d800 in PS CS5 (Win7 64-bit). It says, the model not supported by Camera Raw. Tried updating Camera Raw plug-ins for d800 but keep getting error message: Update failed, Adobe Application Manager may be damaged. Re-install the latest application manager but still the same error message. How to fix?

These links may help
Adobe - Photoshop : For Macintosh
Adobe - Photoshop : For Windows
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

HT201070 Since my last update RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

Since my last update to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

update 10.8.5 solved this problem. Thankyou anyway.

Can not open RAW-Files from Nikon D4 in Photoshop cc

hi. i can not open RAW-Files from Nikon D4 in Photoshop cc. (Camera RAW 6.7) can you help please?

ACR 6.7 would be for an older product, PS-CS5 or PSE10 or PRE10.
What does Help / About Plug-ins… / Camera Raw… show in PS-CC for a version for ACR and is there more than one version of ACR in the Help / About Plug-in list. Help / About Plug-in is what I’d do on Windows; I’m not sure if the menu path is the same on a Mac or not.

I can not open NEF files from Nikon Df

I can not open NEF files from Nikon Df
Buongiorno a tutti,
qualcuno mi può essere di aiuto per utilizzare Camera RAW con i file NEF della nuova Nikon Df ?
Grazie infinite .
Hello everyone,
someone can help me to use Camera RAW NEF files with the new Nikon Df?
Thank you very much.

This thread has instructions for importing Nikon Df raw files in Lr5.3RC (by making them look like Nikon D4 raw files):
http://forums.adobe.com/message/5920044#5920044

NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved

NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved

You can install and use Camera Raw 8.8 with OSX 10.8 Go to Help > Updates in Photoshop CS6

Photoshop elements 12 do not open nef files from Nikon D610 , help please

photoshop elements 12 won't open nef files from Nikon D610 , I have to use DNG converter to openfiles on my elements 12, help please
Thank you
Ptrebor
[email protected]

Thank you,
First I cannot find how to see what version is my Camera Raw, please give
me a hint on that.
Secondly, I am using Windows 7 .
Thanks again,
Ptrebor
2014-12-13 17:34 GMT-05:00 R_Kelly <[email protected]>:
photoshop elements 12 do not open nef files from Nikon D610 , help
please created by R_Kelly <https://forums.adobe.com/people/R_Kelly> in *Photoshop
Elements* - View the full discussion
<https://forums.adobe.com/message/7012253#7012253>

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

Unable to open PDF files from Fileserver Content Source using Browser

The situation is this :
A content source was created to search a fileserver
Search facility finds the files using the browser
Able to open MS Office files from the fileserver
Able to open PDF files that are in the Sharepoint Portal
Unable to open PDF files from the Fileserver
Currently using Sharepoint 2010. PDF Filter is installed and configured on the Sharepoint Server
Your assistance is always greatly appreciated.
Have a great day.
NRH

Hello Nate,
I have the necessary access to the folder.
The content source addresses are
\\172.25.136.53\KDrive\Home\Company\DAILYREP
\\172.25.136.53\KDrive\Home\Company\TRINMAR
\\172.25.136.53\KDrive\Process Safety Management
NRH

Since last update, unable to open PDF files from either banking site. The other (IE) works fine but I hate IE. I deleted newer versions and went back to older releases. No help, same thing. Checked settings in options. That is ok. What's up?

Unable to open PDF files from my banking statements.

I think almost every dev is on arch-general, so that is the place to contact the group in general. Specific points can probably be emailed to the dev involved, if one is identifiable and if the bug tracker is not a better place (bug reports to my email get ignored).
I think the whole problem here is that there is really no dev in charge of that package. So your emails were probably seen then skipped over by all devs thinking not my problem... (I know that is true for me). Then Andrea noticed an "orphan" package that needed updated and went ahead with it without connecting it to your previous emails, which is unfortunate.
Now our maintainer backend is fixed, hopefully we can get all the orphan packages adopted out, or at least know if we need to bring on new people to maintain them. That way, there should always be someone who information about specific packages should be sent to.

How to transfer image files from nikon d800 to ipad4?

How to transfer jpeg image files from nikon d800 to IPad 4?

Are you having a problem? What have you tried? Do you have Apple's camera connection kit?
With the CCK, you can connect the camera or the camera's SD card.
iPad iOS 6 Update - Camera Connection Kit Fix
http://www.georgewheelhouse.com/blog/2012/10/ipad-ios-6-update---camera-connecti on-kit-fix
 Cheers, Tom

Unable to open CS3 Files from within the application

Good Afternoon
I work as IT Support for company looking after 10 ADOBE Creative Suite 3 end-users.
One of my colleagues is unable to open Illustrator or Photoshop files from within their respective applications, but she is able to open them from outside ok.
I have reinstalled ADOBE CS3 and this appeared to resolve the issue, only for it to return again a day later.
She has no other applications or processes running during her attempt to open a file from within CS3.
She will click on Open and the 'Open File' window will flash up for a split second, then the whole application will be frozen. It is as if the 'Open File' window is there, but isnt there because we cant click on it, but the application thinks it is displaying and so she can not click on anything else. The only way to close the application is to end the process under Task Manager.
While I am sitting here tearing what little amount of hair I have on my head, can anyone point me in the right direction?
Is this a Windows problem or an ADOBE problem do you think?
I look forward to any replies.
Thank you

Hi Bob
Ok...
Opened illustrator but was unable to open the 'Open File' window.
Changed the screen resolution, it suddenly worked!
Changed the screen resolution back to as it was before, it also worked.
What could cause this do you think?
By simply changing the screen resolution and back again, the 'Open File' window displayed itself.
Very bizarre!

Unable to open project file - from one 6.0.2 to another 6.0.3.

Hi
We're at a time-critical stage of finishing our movie, and we need to get the color-corrected sequence from the post-house to our studio so we can make some picture changes and get it back to them. They can open the project file just fine (it was created in 6.0.2, but they since updated their system to 6.0.3), and we have just updated to 6.0.3 also. Quicktime is 7.4.5 (which matches their version). However, they've FTP'd it to us, and we cannot open it here. FCP gives the error "Unable to open project file". It's not the "older version" message which I've seen before, it just ... fails to open it. Almost as if the file were corrupt. However, the post house can re-download the file from FTP and open it there, so this confuses me. I've also tried the file on a FCP 6.0 system (which I can't update because it's an Avid system locked to a certain version of Quicktime) and the same error message.
Would anyone be willing to test the file and see if they can, at least, open it?
Many thanks.
Matt

Have them zip the file... Project files via email often don't open if they aren't zipped..
Jerry

Unable to open Raw files from Nikon D800 in Photoshop CC [was:raw updates with creative cloud?]

Similar Messages

Maybe you are looking for