Unable to open RAW files with Photoshop CS6 - Camera Raw

Hi all,
I'm trying to open .CR2 files from a Canon 450D on Photoshop CS6 as well as with Lightroom 4 but it doesn't work.
I've updated the Adobe Camera Raw to its latest edition (8.8), but anyway, when I try to open them it appears the message below: It basically says that photoshop is not able to open the file, make sure that you have installed the latest edition of Camera Raw and to visit the link for further info...
After looking for solutions on Internet, I've also tried to convert the RAW files into DNG, but Adobe DNG converter says that the folder does not contain any RAW file, though they are all .CR2 files...
I've tried several times in many ways... Any help would be much appreciated. Many thanks in advance.

Hi Benjamin,
You were right. It was the camera's provided software transfer system. I've copied them directly from the (same) card to the desktop and works.
Many many thanks! Cheers

Similar Messages

Unable to open AVI files in Photoshop CS6

Unable to open AVI files in Photoshop CS6
I am running PS6 and want to open and edit AVI files. When I try to do that I get an error message saying "the video file cannot be opened" . This seems to apply to ALL avis - yet I can open and edit MP4, MMV etc. I installed Gspot to track whether it was a codec issue and when I try to open ANY file I get this error message : "Warning: DirectShow crashed while GSpot was attempting to obtain information about a codec. This is usually due to damaged, misconfigured, conflicting, or poorly written codec drivers. It is possible, perhaps even likely, that other media players will crash when they attempt to play this file as well, as most of them will also use DirectShow. GSpot was able to intercept the crash, and has attempted to identify the codec or filter involved; uninstalling or reinstalling this codec or filter may solve the problem. The codec was tentatively identified as: C:\Windows\system32\imaadp32.acm Unknown video codec #11" I have NO idea where to go from here. I see a site to download the "imaadp32.acm" codec but what about the "Unknown video codec #11". What the heck is that and what do I do about it. Any help would be appreciate, Cliff
ps I should add that the avi files DO open and play in Bridge. I have the latest Quicktime. Everything is up to date and PS and the computer is otherwise working perfectly !

Thanks Curt and 'Mylenium'
I did re-set the prefs - but to no avail
I checked and my graphics driver and audio is all up to date.
No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
Cliff

Opening iPhoto 8 JPG file with Photoshop CS3 Camera Raw editor

I have all my photos stored in my iPhoto 8 library. I have both RAW (CR2) and JPG images. iPhoto 8 opens the CR2 images with Photoshop Raw editor, but I want to use iPhoto to open JPG images with the Photoshop Raw editor using Camera Raw.
How do I do this without having to export JPG images and opening from Photoshop?
Thanks!
SP

SP:
If you're trying to use the RAW editor on a jpg it can't be done. It will only work on the RAW file. If you are wanting to edit the RAW file from within iPHoto with CS3 then set CS3 to be the editor of choice in iPhoto's general preferences. Next go to the Advanced iPhoto preference pane and select the option "User RAW when using external editor". That will open the RAW file with Photoshop's raw editor. When you finish you MUST save the new file to the Desktop and import as a new file.
For some general info on using Photoshop with iPhoto:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's new option in it's rebuild library window, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

Can't open CR2 files in photoshop and camera raw

This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well.

Can't open .CR2 files in PhotoShop CS5, Camera RAW or Adobe DNG Converter

Firstly take note I shot these with a Canon EOS 450D (or Rebel XSi)...
I see a lot of answers speaking about having the most up to date version of the Camera RAW Plug-in.
I have a similar issue with my .CR2 files... I cannot open them in Camera RAW because it tells me that my camera model or make is not supported by the Plug-in, and so I was directed by other forums to just try converting the .CR2 files to .DNG. I already had the Adobe DNG Converter (version 6.5 I believe), so I tried this. It too told me that my files or camera make were not supported.
However, I have always been able to successfully both open my .CR2 files AND convert them to .DNG. I had not updated anything on my camera nor on my Adobe programs and for some reason this last attempt to open RAW files failed me... I have no idea what change would have led to it. Luckily I shot in both RAW and Large JPG but I certainly don't want to rely on my JPGs of course... Any idea why this problem might have arisen now if it had always worked easily in the past?
Thanks!

Are these the same exact files you've opened before that you cannot now open?
Or are they newly copied files (camera or CF card to computer)?
Can you not open ANY Canon 450D files, even those you find online and download?
What I'm getting at with these questions is to try to eliminate or suspect data corruption of the files on your disk.
Exactly what versions of the various tools do you have, specifically (don't guess - go check)?
-Noel

Unable to open jpeg files with photoshop

Hi,
just installed the photoshop cc to a mac with mac os x 10.6.8 and when the user is tryinh to open a jpeg file get the following error mesage:
"could not complete your request because the file was not found"
Thanks

Does this refer to one specific jpg or all jpgs on all volumes?
Please read these and proceed accordingly:
Photoshop: Basic Troubleshooting steps to fix most issues
http://forums.adobe.com/docs/DOC-2325

Opening JPG directly in Photoshop, passing Camera Raw

Hi! I would like to open JPGs that were edited in Camera Raw directly in Photoshop and I saw in this video from Russel Brown how I could do this. Only, he is using Bridge CS3 in the video and I am using CS4. The thing is that I don't have "Always open JPEG files with setting using Camera Raw", instead I have a dropdown with: "Disable JPEG support", "Automatically open JPEG with settings" and "Automatically open all supported JPEG". I tried these options but they don't help.
Menu options in the video
The menu options that are available to me
Do you have any solutions?
Thank you,
Victor

I just realised that setting to "Disable JPEG support" bypasses Camera Raw, but it has to be done to every file individually, and in that video from Russel Brown he just set an option and every JPEG opened in Photoshop bypassed Camera Raw. Do you know if this feature can be set in CS4 too?
Thank you,
Victor

Unable to open Canon 7D CR2 raw files in Photoshop CS6

Hi Folks,
I have been trying to open Canon 7D CR2 raw files in Photoshop CS6 (Extended) (Windows 8.1) but I'm always getting the error "Could not complete your request because the file format module cannot parse your file".
I installed the Camera Raw plugin ver 8.8.0.397 today. Did this initially by downloading and running the CameraRaw_8_8.zip available here Camera Raw plug-in installer. Still got the error.
Went and did the Check Updates in Photoshop and updated the Camera Raw (and other components) but STILL cannot open the CR2 files.
I can see the thumbnails in Bridge but when I double click to open them in Photoshop, same error.
Cannot seem to get past the "Could not complete your request..." error.
Any ideas?
Cheers,
Doug...

Hi Folks,
Thanks for your replies and assistance so far, very much appreciated. Its a very frustrating problem... this should be one of those things that just work.
I have uploaded two sample pics taken with my canon 7d. If you get a chance, could you please try opening these images to see if they work on your machine.
http://www.bespoke-gems.com/images/gemstones/misc/rawtest1_canon7d.cr2
http://www.bespoke-gems.com/images/gemstones/misc/rawtest2_canon7d.cr2
I have tried opening them on both my office and home computer but neither of them work.
Hmmm... could it have anything to do with the lens (Canon Macro Lens EF 100mm1:2.8 USM)
Many thanks!

Unable to open d800 files with cs6 and camera raw 8.3

unable to open d800 files with cs6 and camera raw 8.3

Have you used Nikon Transfer on those files? Early versions are known to corrupt files so that ACR can't read them. Nikon has since fixed the bug so new versions are safe.
Here's a thread (with a fix) in the Lightroom forum: https://forums.adobe.com/message/6253962

I can't open D7200 NEF file with Photoshop CS6. I checked the updates and there are no updates available. What do I do?

Hi,
I can't open D7200 NEF files with Photoshop CS6.I checked the updates and there are no updates available.What do I do?
Nitin

For the time being, shoot JPEG images. At this time there is no support for NEF files from the D7200 in any Adobe product. It was released at such a time that it wasn't included in the last Camera Raw update. And Lightroom hasn't been updated either. Consequently, there is no DNG converter available at this time. We will have to wait and see what programs will be able to accommodate the D7200 when Adobe releases updates or upgrades that support the camera.

Having trouble opening camera raw files. Already downloaded Camera Raw Update for Photoshop CS5. I have a pc.

Please Help? Having trouble opening camera raw files. Already downloaded Camera Raw update. I have a pc.

If the camera is fairly new then the version of ACR you have with CS5 won't be able to read those file. You'll need to upgrade to a newer version of Photoshop or use Lightroom 5.
Once a new version of Photoshop comes out Adobe does not support updating ACR from the older version of PS.

Unable to open PDF files with Adobe Reader, Mac trying to open files with Quicktime instead, but not succeeding. HELP!

Unable to open PDF files with Adobe Reader, Mac trying to open files with QuickTime instead, but not succeeding. HELP!

Hi BDAqua,
Thanks for the info, I dragged a PDF to desktop ctrl-, get info. change all to open with adobe.
Problem solved, many thanks for a quick response.
Barry69

Is there any photoshop API functions can let me open a file with photoshop in my plugin?

I used the function system("open file"), it works well in any other program.
For example, system("open 1.psd"), this code can use photoshop open the file 1.psd .
But it just don't work in my plugin program.
How can I use photoshop to open a file in filter plugin at Mac OS X?
Is there any photoshop API functions can let me open a file with photoshop in my plugin?

Go to settings> general and scroll down to multitasking geastures, turn them on and by swiping with four fingers from the right side of the iPad to the left and back you can switch between apps. I think this is what you need I'm not sure, I hope it helps

Please direct me to the Photoshop CS6 camera raw plugin for Canon G15 digital camera

please direct me to the Photoshop CS6 camera raw plugin for Canon G15 digital camera
Thank you

Hi, rich_fred.
As the Canon G15 is a very new model, support is not yet available through Camera Raw. In the meantime, try out the software that came with you camera, to see if it can export a TIF or JPEG, which should open up in Photoshop just fine.
Hopefully support for the G15 will be available in the next Camera Raw update. You can find a list of supported cameras here: http://www.adobe.com/products/photoshop/extend.html

How do i open CR2 files with photoshop cs5?

Adobe camera raw will not open CR2 files in photoshop. How do i open these files? i have tried updating camera raw witht he last 8 updates but it still will not open. Camera raw shows a pop up box saying the file is not supported.

mushybutt wrote:
I believe the proglem is with in Adobe CS5 and something just isnt working correctly and that maybe why it cant read or do anything with RAW files. I also noticed that Adobe's site says that it supports canon 70D CS2 files. my camera files are CR2, im not sure if maybe that might have something to do with my issue.
Nothing to do with anything being faulty in CS5.
The reason has already been given by tpolakov above: The 70D was first supported in Camera Raw 8.2 which is only compatible with CS6 and later. CS5 is not compatible with Camera Raw 8.2 so CS5 cannot read Raw files from the 70D. That's all there is to it.
mushybutt wrote:
Thanks Tomsm13, I actually tried to convert the files to DNG but that doesnt work either. I used the latest compatable Adobe DNG converter and i get a message that it can not find any camera RAW files to convert.
You select a folder containing CR2 files, not a CR2 file.
See Camera Raw: How to use Adobe DNG Converter - YouTube
From 1.40 onwards.

Unable to open RAW files with Photoshop CS6 - Camera Raw

Similar Messages

Maybe you are looking for