Unable to open RFC connection to SAP System NSP
Hi all,
During installation i am getting an error which is as follows,
"Unable to open RFC connection to SAP System NSP.
Solution: Start the system."
And the second problem is that there are no connections shown in SAPGUI.
Please help me out.
Thanking you,
Kranthi
HI Kranthi,
Have you checked this thread NW Preview Installation error?
Regards
Similar Messages
-
SAP R/3 installation - FRF-00007 Unable to open RFC connection
Hi all
I install SAP R/3 Enterprise SR1 with SuSE Linux Enterprise server 9 and SAPDB 7.3.28. At the end of the installation exactly on the " Starting RFC Jobs (post processing" the following problem begins.
<b>in the LOG INSTALLATION PROGRESS</b>
See '/sapmnt/RRP/exe/startsap all DVEBMGS00' output in '/sapinstdb/startsap.log'.
INFO 2006-07-27 16:50:47
'/sapmnt/RRP/exe/startsap all DVEBMGS00' returned with '0'.
PHASE 2006-07-27 16:50:49
Prepare Starting RSWBOINS, RADDBDIF
INFO 2006-07-27 16:50:49
RFC parameter CLIENT was set to value 000.
INFO 2006-07-27 16:50:49
RFC parameter USER was set to value DDIC.
INFO 2006-07-27 16:50:49
RFC parameter LCHECK was set to value 1.
INFO 2006-07-27 16:50:49
RFC parameter PCS was set to value 1.
INFO 2006-07-27 16:50:49
RFC parameter LANG was set to value EN.
INFO 2006-07-27 16:50:49
RFC parameter ASHOST was set to value rpone.
INFO 2006-07-27 16:50:49
RFC parameter SYSNR was set to value 00.
INFO 2006-07-27 16:50:49
RFC connection information checked successfully.
ERROR 2006-07-27 16:50:59
FRF-00007 Unable to open RFC connection.
ERROR 2006-07-27 16:50:59FRF-00063 RFC logon failed with message: Connect to SAP gateway failedConnect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
ERROR 2006-07-27 16:50:59
FJS-00012 Error when executing script.
<b>IN THE SHELL - KONSOLE</b>
TRACE [iaxxccntrl.cpp:595]
CController::stepExecuted()
The step StartSAPSystem with key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPInstancePrepare|ind|ind|ind|ind|ind|0|StartSAPSystem|ind|ind|ind|ind|ind|0|StartSAPSystem has been executed successfully.
TRACE [iaxxejsexp.cpp:138]
EJS_Installer::writeTraceToLogBook()
t_SAPComponent_SAPSystemLogon_SHARED.insertRow(), inserting
TRACE [iaxxccntrl.cpp:595]
CController::stepExecuted()
The step sCopytSAPSystemsLogon with key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Rfc_Jobs|ind|ind|ind|ind|ind|0|sCopytSAPSystemsLogon has been executed successfully.
PHASE 2006-07-27 16:50:49 [iaxxccolwk.cpp:328]
CCheckCollectingWalker::printPhaseInfo()
Prepare Starting RSWBOINS, RADDBDIF
TRACE [iaxxclib.cpp:56]
load()
Opened iamodrfc.so
TRACE [iaxxejsexp.cpp:138]
EJS_Installer::writeTraceToLogBook()
Connect to SAP gateway failed
Connect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner broken
TIME Thu Jul 27 16:50:59 2006
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -6
MODULE niuxi_mt.c
LINE 1237
DETAIL NiPRead (0.0.0.0/0)
SYSTEM CALL recv
ERRNO 104
ERRNO TEXT Connection reset by peer
COUNTER 3
Transaction begin ********************************************************
TRACE [iaxxbrfc.cpp:119]
CIaRfc::CIaRfc
Instance for SAP system module was created.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT was set to value 000.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER was set to value DDIC.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK was set to value 1.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS was set to value 1.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG was set to value EN.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST was set to value rpone.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR was set to value 00.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:571]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR 2006-07-27 16:50:59 [iaxxrfcimp.cpp:481]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE [iaxxrfcimp.cpp:482]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE [iaxxrfcimp.cpp:485]
CAbRfcImpl::openRfcConn
Connect to SAP gateway failed
Connect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner broken
TIME Thu Jul 27 16:50:59 2006
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -6
MODULE niuxi_mt.c
LINE 1237
DETAIL NiPRead (0.0.0.0/0)
SYSTEM CALL recv
ERRNO 104
ERRNO TEXT Connection reset by peer
COUNTER 3
ERROR 2006-07-27 16:50:59
CJSlibModule::writeLogEntry()
FRF-00063 RFC logon failed with message: Connect to SAP gateway failed
Connect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner broken
TIME Thu Jul 27 16:50:59 2006
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -6
MODULE niuxi_mt.c
LINE 1237
DETAIL NiPRead (0.0.0.0/0)
SYSTEM CALL recv
ERRNO 104
ERRNO TEXT Connection reset by peer
COUNTER 3
Transaction end **********************************************************
TRACE [iaxxejsbas.hpp:156]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown exception
ERROR 2006-07-27 16:50:59 [iaxxejsctl.cpp:241]
EJS_ControllerImpl::executeScript()
FJS-00012 Error when executing script.
TRACE [iaxxgenimp.cpp:428]
processUserInput()
got notification...
TRACE [iaxxsubjct.cpp:58]
notify()
releasing notifyLock
DO YOU HAVE SOME IDEA; HOW I CAN SOLVING THIS PROBLEM
Thanks
Jose MarcosHi Johanes
Thank you very much fot your email
Sorry Im new in this Installation
I have some questions.
I see the SPdent, and I dont have any SP Installed
<b>In the etc/host I have</b>:
hosts This file describes a number of hostname-to-address
mappings for the TCP/IP subsystem. It is mostly
used at boot time, when no name servers are running.
On small systems, this file can be used instead of a
"named" name server.
Syntax:
IP-Address Full-Qualified-Hostname Short-Hostname
127.0.0.1 localhost
special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
192.168.101.29 rpone.local rpone
I need to install the SP?
What IP I need to delete ?
Regards
Jose -
Unable to open RFC connection - Err message
I all
I am trying to install SAP ERP 2004 SR1 on Microsoft Windows Server 2003, SQL Server 2000. I have successfully installed the Central Instance but when I try to install the Database instance after the database loading the following error is given:
FRF00007 - Unable to open RFC connection.
I have also tried to start the sap system. The message_server and igswd processed run ok, but the disp+work process is stopped.
I am also sending you the developer trace for this process.
Thank you a lot
Vasil
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 27 11:24:48 2009
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 2668
***LOG Q00=> DpSapEnvInit, DPStart (01 2668) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Mon Jul 27 11:24:53 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 058C0040, size: 3192688)
DpShMCreate: allocated sys_adm at 058C0040
DpShMCreate: allocated wp_adm at 058C1B58
DpShMCreate: allocated tm_adm_list at 058C4478
DpShMCreate: allocated tm_adm at 058C44A0
DpShMCreate: allocated wp_ca_adm at 05B6B0E8
DpShMCreate: allocated appc_ca_adm at 05B70EA8
DpShMCreate: allocated comm_adm_list at 05B72DE8
DpShMCreate: allocated comm_adm at 05B72E00
DpShMCreate: allocated vmc_adm_list at 05BB9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05BB9AF8
DpShMCreate: allocated wall_adm at 05BB9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1131 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( upayweb1) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Jul 27 11:24:54 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Mon Jul 27 11:25:33 2009
ERROR => W0 (pid 3740) died [dpxxdisp.c 12187]
ERROR => W1 (pid 3748) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3756) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3764) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3772) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3780) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3792) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3800) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3740 (SIGUSR2)
ERROR => DpWpKill(3740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3748 (SIGUSR2)
ERROR => DpWpKill(3748, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3756 (SIGUSR2)
ERROR => DpWpKill(3756, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3764 (SIGUSR2)
ERROR => DpWpKill(3764, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3772 (SIGUSR2)
ERROR => DpWpKill(3772, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3780 (SIGUSR2)
ERROR => DpWpKill(3780, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3792 (SIGUSR2)
ERROR => DpWpKill(3792, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3800 (SIGUSR2)
ERROR => DpWpKill(3800, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:43 2009
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 27 09:25:43 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3740 Ended no 1 0 0
1 DIA 3748 Ended no 1 0 0
2 UPD 3756 Ended no 1 0 0
3 ENQ 3764 Ended no 1 0 0
4 BTC 3772 Ended no 1 0 0
5 BTC 3780 Ended no 1 0 0
6 SPO 3792 Ended no 1 0 0
7 UP2 3800 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 27 09:25:43 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Jul 27 09:25:43 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 27 09:25:43 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:48 2009
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3724) (SOFT_KILL)
Stop icman
killing process (3732) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3724 HANDLE:1592)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:49 2009
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3724 HANDLE:1592)
[DpProcDied] Process died (PID:3732 HANDLE:1584)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'upayweb1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1596
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2668) [dpxxdisp.c 8495]
Good Bye .....Hi Juan <br>
I am sending you the log from dev_w0 <br>
<br>
Thank you a lot,<br>
Vasil
<br> <br>
<br>
<br>
trc file: "dev_w0", trc level: 1, release: "640"<br>
<br>
*<br>
ACTIVE TRACE LEVEL 1<br>
ACTIVE TRACE COMPONENTS all, M<br>
*<br>
B <br>
B Mon Jul 27 11:24:53 2009<br>
B create_con (con_name=R/3)<br>
B Loading DB library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' ...<br>
B Library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' loaded<br>
B Version of 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43)<br>
B New connection 0 created<br>
M systemid 560 (PC with Windows NT)<br>
M relno 6400<br>
M patchlevel 0<br>
M patchno 43<br>
M intno 20020600<br>
M make: multithreaded, Unicode<br>
M pid 3740<br>
M <br>
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3740) [dpxxdisp.c 1160]<br>
I MtxInit: -2 0 0<br>
M DpSysAdmExtCreate: ABAP is active<br>
M DpSysAdmExtCreate: JAVA is not active<br>
M DpShMCreate: sizeof(wp_adm) 10528 (1316)<br>
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)<br>
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)<br>
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)<br>
M DpShMCreate: sizeof(comm_adm) 290000 (580)<br>
M DpShMCreate: sizeof(vmc_adm) 0 (372)<br>
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)<br>
M DpShMCreate: SHM_DP_ADM_KEY (addr: 060C0040, size: 3192688)<br>
M DpShMCreate: allocated sys_adm at 060C0040<br>
M DpShMCreate: allocated wp_adm at 060C1B58<br>
M DpShMCreate: allocated tm_adm_list at 060C4478<br>
M DpShMCreate: allocated tm_adm at 060C44A0<br>
M DpShMCreate: allocated wp_ca_adm at 0636B0E8<br>
M DpShMCreate: allocated appc_ca_adm at 06370EA8<br>
M DpShMCreate: allocated comm_adm_list at 06372DE8<br>
M DpShMCreate: allocated comm_adm at 06372E00<br>
M DpShMCreate: allocated vmc_adm_list at 063B9AD0<br>
M DpShMCreate: system runs without vmc_adm<br>
M DpShMCreate: allocated ca_info at 063B9AF8<br>
M DpShMCreate: allocated wall_adm at 063B9B00<br>
X <br>
X Mon Jul 27 11:24:54 2009<br>
X EmInit: MmSetImplementation( 2 ).<br>
X <ES> client 0 initializing ....<br>
X Using implementation flat<br>
M <EsNT> Memory Reset disabled as NT default<br>
X ES initialized.<br>
M <br>
M Mon Jul 27 11:24:55 2009<br>
M calling db_connect ...<br>
C Thank You for using the SLOLEDB-interface<br>
C Using dynamic link library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll'<br>
C dbmssslib.dll patch info<br>
C patchlevel 0<br>
C patchno 43<br>
C patchcomment View with literal containing (0x60) (786638)<br>
C np:(local) connection used on UPAYWEB1<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
C Provider Release:9.00.1399.06<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes<br>
C Using shared procedure name cache UPAYWEB1_UFTUFT_UFT_MEM initialized by another process.<br>
C Connected to db server : [UPAYWEB1] server_used : [np:(local)], dbname: UFT, dbuser: uft<br>
C pn_id:UPAYWEB1_UFTUFT_UFT<br>
C Not using MARS (on sql 8.0)<br>
B Connection 0 opened<br>
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost <br>
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090727 112454 UPAYWEB1 <br>
C The IRow interface is supported by this OLEDB provider<br>
M db_connect o.k.<br>
I MtxInit: 0 0 0<br>
M SHM_PRES_BUF (addr: 0AD60040, size: 4400000)<br>
M SHM_ROLL_AREA (addr: 5EF60040, size: 160563200)<br>
M SHM_PAGING_AREA (addr: 0B1A0040, size: 72417280)<br>
M SHM_ROLL_ADM (addr: 0F6C0040, size: 1603610)<br>
M SHM_PAGING_ADM (addr: 0F850040, size: 525344)<br>
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F8E0040<br>
M ThCreateNoBuffer index size: 3000 elems<br>
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0F970040<br>
X EmInit: MmSetImplementation( 2 ).<br>
X <ES> client 0 initializing ....<br>
X Using implementation flat<br>
X ES initialized.<br>
C <br>
C Mon Jul 27 11:24:58 2009<br>
C The IRow interface is supported by this OLEDB provider<br>
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
B dbtbxbuf: Buffer TABL (addr: 146900C8, size: 30000000, end: 1632C448)<br>
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1<br>
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5<br>
B dbtbxbuf: protect_shm = 0, force_checks = 0<br>
B dbtbxbuf: tsize_retry = 14304000<br>
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]<br>
B dbtbxbuf: Buffer TABLP (addr: 163300C8, size: 10240000, end: 16CF40C8)<br>
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1<br>
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5<br>
B dbtbxbuf: protect_shm = 0, force_checks = 0<br>
B dbtbxbuf: tsize_retry = 5047296<br>
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]<br>
B dbtbxbuf: Reading TBX statistics:<br>
B dbtbxbuf: Opening C:\usr\sap\UFT\DVEBMGS01\data\tbxnew failed (No such file or directory).<br>
B dbtbxbuf: Renaming C:\usr\sap\UFT\DVEBMGS01\data\tbxnew to C:\usr\sap\UFT\DVEBMGS01\data\tbxstat failed (No such file or directory).<br>
B dbtbxbuf: 0 object entries precreated<br>
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.<br>
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455]<br>
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 208, sev 16), Invalid object name 'DDLOG'.<br>
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455]<br>
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT MAX(SEQNUMBER) AS c FROM DDLOG ]<br>
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112017<br>
C DbSlRead - Error 103 (dbcode 208) on open<br>
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455><br>
C DbSlRead - Error 103 (dbcode 208) on fetch<br>
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455><br>
B ***LOG BZY=> unexpected return code 103 calling SEL [dbsynseq#1 @ 255] [dbsynseq0255 ]<br>
B db_syinit failed<br>
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 252]<br>
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1901]<br>
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1359]<br>
M in_ThErrHandle: 1<br>
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9413]<br>
M <br>
M Info for wp 0<br>
M <br>
M stat = 4<br>
M reqtype = 1<br>
M act_reqtype = -1<br>
M rq_info = 0<br>
M tid = -1<br>
M mode = 255<br>
M len = -1<br>
M rq_id = 65535<br>
M rq_source = 255<br>
M last_tid = 0<br>
M last_mode = 0<br>
M int_checked_resource(RFC) = 0<br>
M ext_checked_resource(RFC) = 0<br>
M int_checked_resource(HTTP) = 0<br>
M ext_checked_resource(HTTP) = 0<br>
M report = > <<br>
M action = 0<br>
M tab_name = > <<br>
M <br>
M *****************************************************************************<br>
M *<br>
M * LOCATION SAP-Server upayweb1_UFT_01 on host upayweb1 (wp 0)<br>
M * ERROR tskh_init: ThIPCInit<br>
M *<br>
M * TIME Mon Jul 27 11:24:58 2009<br>
M * RELEASE 640<br>
M * COMPONENT Taskhandler<br>
M * VERSION 1<br>
M * RC 17<br>
M * MODULE thxxhead.c<br>
M * LINE 9589<br>
M * COUNTER 1<br>
M *<br>
M *****************************************************************************<br>
M <br>
M PfStatDisconnect: disconnect statistics<br>
M Entering TH_CALLHOOKS<br>
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP<br>
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]<br>
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]<br>
M Entering ThSetStatError<br>
M Entering ThReadDetachMode<br>
M call ThrShutDown (1)...<br>
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3740) [dpnttool.c 357]<br> -
Error : FRF-00007 Unable to open RFC connection
Hi All,
I'm installing SAP BW 3.5 for oracle 9.2 and patch 10.1 on AIX 5.3server.
The end of installation 'Starting RFC jobs" i got the error.
Log Details:
ERROR 2008-07-28 19:20:02
FRF-00007 Unable to open RFC connection.
ERROR 2008-07-28 19:20:02
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failedConnect_PM GWHOST=biqci, GWSERV=sapgw00, ASHOST=biqci, SYSNR=00
Can anybody help me to solve this issue
Regards,
M.M Selvakumaar
09739798709
subject changed by moderator!... Read the "Rules of Engagement"
Edited by: Juan Reyes on Jul 28, 2008 4:03 PMHi juan,
Thanks for Ur reply
As per ur advice : I checked the path etc/services
Everything is fine there
Then
Solution:
I stopped the sap service and restart the service then I continued the installation without error
After installation I checked T-code: SICK there I got one error
Error Details:
SAP System Check
OS release AIX 3 5 00C5E98B4C00 is not supported with this kernel (640)
Severe problems were detected during initial system check.
Please, do not use that system before fixing these problems.
So please help me to solve the issue
Regards,
MM.selvakumar -
FRF-00007 Unable to open RFC connection.
I am trying to install SAP R/3 Enterprise 4.70 on Windows Server 2000, database Oralce 9.2 and I want to install entire SAP system in 1 Computer.
I have been installed Oracle 9.2 and SAP's center service successfully.
But when i install SAP's database service it throws error as below and
teminated.
ERROR 2006-12-04 01:01:08
FRF-00007 Unable to open RFC connection.
ERROR 2006-12-04 07:03:21
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failedConnect_PM GWHOST=diane, GWSERV=sapgw00, ASHOST=diane, SYSNR=00Hi,
I had a similar error, with windows 2000 advanced server, oracle 9.2.0.6, SAP BW 3.1.
To resolve this error please upgrade your kernel.
download the kernel. say 640
uncar the files sapdbexe.sar and sapexe.sar using the sapcar.exe
on dos prompt go to the particular directory where u have downloaded the above sar files using "cd" command.
SAPCAR -xvf <your-SAR-file> to uncar the files.
shut down sap using the MMC.
then in services stop saposcol
oracle service sapserviceSID
and the sapSID_##
now just copy the new kerlnel files you have uncared above into the /usr/sap/SID/exe/run/ directory.
start the services you stopped and start SAP using the MMC.
Now you should be able to logon. Somtimes the MMC shows the yellow status due to missing workprocess status. However the system should work fine.
Manmath. -
"COMMUNICATION FAILURE" during JCo call. Error opening RFC connection
Hi
I am trying the following scenario
/people/varadharajan.krishnasamy/blog/2007/05/11/how-to-use-digital-certificates-for-signing-encrypting-messages-in-xi
In SM 59 test connection of AI_RUNTIME_JCOSERVER throws error " Error opening RFC connection"
Do I need to activate any service in SICF and do I need to do any IE configuration (sxmb_adm)
pls let me know the steps to solve this
thanks
manianHi Manian,
pls chk with ABAP system tha tu have given the correct PWD and CLNT No
Use
You need to create the following RFC destinations with both transaction SM59 (ABAP) and the Visual Administrator (Java):
● AI_RUNTIME_JCOSERVER
Points from the Integration Server to the mapping runtime. The program ID corresponds to the entry under JCo RFC provider for the J2EE Engine (used for the mapping runtime, value mapping, and the exchange profile).
● AI_DIRECTORY_JCOSERVER
Points from the Integration Server to the Integration Builder. The program ID corresponds to the entry under JCo RFC provider for the J2EE Engine (used to refresh the runtime cache).
● LCRSAPRFC
The RFC destination LCRSAPRFC is required for the connection to the System Landscape Directory (SLD). It is used to read the exchange profile.
● SAPSLDAPI
The RFC destination SAPSLDAPI is required for the connection to the SLD. It is used by the ABAP API.
Depending on your client settings, it may be necessary to log on to your Integration Server host as SAP system user with the authorization to maintain customizing tables and to release transport orders.
User SAP* or DDIC does not have these authorizations
Thanx
Sampath -
Unable to Open unix file in UNICODE system which created NON-UNICODE system
Unable to Open unix file in UNICODE system which created in NON-UNICODE system
We have two SAP systems both are ECC6.0 but System 1 is NON-Unicode and System2 is Unicode system.
There is a common unix directory/folder for both system.
Our requirement is to create one file on unix common folder and write the data to file from system1 .
In system2 open the same file for appending mode to write the data .
The file in system 1 created with below sentence.
OPEN DATASET g_unix_file FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
Now I have to append the data from system 2 to same file.
I have tried to used below statement in system 2 to open the file but sy-subrc value comes as '8'.
1> OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING UTF-8.
2>OPEN DATASET g_unix_file FOR APPENDING IN legacy TEXT MODE CODE PAGE
cdp IGNORING CONVERSION ERRORS .
3>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING Default.
4>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING NON-UNICODE.
Tried out all the possibilities as per F1 help given for open dataset , but still there is problem with opn file in appending as well output mode.However the file successfully open in Input mode(Read).
Please advice suggestion to resolve this issue.
Thanks.Messgae captured as 'Permission Denied". The program gets triggered with system user Id PPID.
How to check the security access of the User ID. -
Call a remote RFC from one sap system to to other sap system
Hi experts,
I'd like to know how to connect two sap systems via RFC. The two systems are in the same network and I'd like to know how to set up the SM59 in order to create the destination to the RFC.
Any help in configuring the SM59 to stablish the communication?
thanks a lot.<b>You can do that from t-code SM59 or SALE</b>
This step is to create the Logical system for the remote system.
A logical system allows SAP internal functions to interface with external systems, either an SAP system or a non-SAP system. We also need to have a logical system name for the SAP system,.
SALE is the transaction.
Expand the Sending and receiving Systems and then the Logical systems click on define logical system.
You will receive the informational message, The table is cross-client. Click the green check icon to continue.
Now click on the New Entries.
The Screen appears like this here you will be giving the LS name and the description of that.
After u click on the save button a window will be displayed like the bellow asking for the Request ID. Here we can create our own or we can use the existing one.
After that we see the message blow as DATA SAVED.
Now the step is to Link the LS to the client.
Click on the Assign Client to LS .
The Screen as below will be appearing.
Double click on the client on which u r going to work and there specify the SAP LS(IDS47800) and you also need to specify the City and Std Currency and the client role as Test for the drop down box.
Register the RFC server module with the
SAP gateway
The RFC (Remote Function Call) destination is a logical name used to define the
Characteristics of a communication link to a remote system (in our case, LS for the remote system) on which a function needs to be executed. In ALE, the RFC specifies information required to log on to the remote SAP system to which an IDoc is being sent.
To register the RFC Sever Module as the RFC destination:
SAP transaction code: SM59 Type /nsm59 on the SAP input window and press the
Enter key.
Expand the TCP/IP connections directory.
Give some name to the RFC Destination (ALESERVER), Connection type as T. and fill the Description field.
In technical settings give the program name as you desired.
Click on save
regards,
srinivas
<b>*reward for useful answers*</b>
Message was edited by:
XI_Novice
Message was edited by:
XI_Novice -
How to connect one SAP system to Non-SAP system(Example:Window's7)?
Hi Experts,
In general, One SAP system can connect another SAP system through RFC.How to connect One SAP system to Non-SAP system(example:window's 7) and is it possible through RFC?
Thanks and Regards,
NageswarHello Wolfgang Schaper,
Thank you so much for quick response.
As you told I am trying to work with BRFplus/DSM to call decision services from nonABAP systems,so I tried with RFC.But it is not possible as you told.
Please give any solution Without using Web Services, is there any ways to connect from SAP system with the Non-SAP Systems. -
Number of remote RFC connections to SAP from third party application
Hi All,
We are using an external application which is using the JCO API to make a connection to the SAP server to pass invoices. But the connections are note properly closed after invoking the RFCs and SAP seems to be not able to handle further requests once the numer of connections reach the maximum limit.
Could you tell whether there is a max limit on the number of connections opened to SAP from remote function calls from a third party product?
Is there anyway by which we can make sure that connections are properly closed in SAP after the each remote call?
Thanks in advance for your pointers.
Regards
ArunDear Arun,
Here are the parameter settings which you can do to set up RFC connections to SAP servers.
http://help.sap.com/saphelp_nw70/helpdata/en/c3/ce70a5cf0ab1499bfbf464e6e92de0/frameset.htm
This will resolve all your problems.
Thanks & Regards
Vivek -
HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA APPLICATION
HI expects,
HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA or . DET APPLICATION.please provide me some scenarios and documents.please help me.Hi,
In the sender side i.e. in SAP system you can use IDoc/RFC/Proxy to push the data to XI.
IDoc supports only Async communication and in Sync case performace is good using Proxy.
In the receiver side you can use Java Proxy to connect to the Java application or you can even bulid a webservice over the Java/.Net application and use SOAP adapter to post data to it.
Thanks
SaNv... -
Error when opening RFC Connection
Hello SAPers,
I have configured PDA in my ECC6.0 --- XI (ABAP+JAVA) Which was successful.
In my Web Dyno Pro Content Administrator
I have performed the JCO Destinations test which was successful
when I go to the URL
http://server:port/webdynpro/dispatcher/sap.com/isisrsrsmenapp/MainApp
entered the store number
In the next menu
Inventory Lookup when I enter the Article number and press Go Button
It is giving me error " Error when opening RFC Connection "
Rest of them working perfectly...
Do I need to do any configuration In Visual Admin?
Could anyone advice
Thanks In Advance
HariKrishnaThanks it got solved it was an error in RFC, I have changed the RFC now it is working fine
Thanks
Hari -
SWCV still contains IDocs/RFCs from an SAP system
Hi
I have imported Idoc to a SWCV. Now am trying to create one more namespace under it. When I try to create another namespace, it automatically selects the check button Import of Idoc and RFC interfaces from SAP systems permitted. If I select not permitted and try to create namespace it gives me this message
Unable to save object XYZ , 1.0 of ABC
Indicator cannot be undone since the software component version still contains IDocs/RFCs from an SAP system
Delete the objects first.
Is it possible for me to create another namespace under a SWCV, to which I have already imported Idoc, by selecting the option " Not permitted ". I want to create another namespace and I don't want to select that option as I have already imported IdocHi,
You no need to touch that check box, you can still create the namespace under software component.
Just double click lick on software component, goto edit mode and click on + symbol to insert namespace and save then activate.
Note:- As you have already imported the RFC and IDoc under your software component(not namspace as you mentioned), you keep that check box import of RFC and IDocs permitted. Dont try to uncheck that.
thanks,
madhu -
RFC connection to source system is damaged , no Metadata uploaded
Hello Friends,
I need your help to understand and rectify why my transport is failing again and again.
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata upload
Environment - Production Support (Dev - Quality - Testing - Production)
Alive scenario - Need to create two InfoObject and incorporate the fields in to data targets and reports.
What we have did?
1st request - We have created new request and captured two Infoobjects in to the request.
2nd Request - We have captured the replicated Datasource along with that the below sequence displayed by default in the same package.
Communication structure
DataSource Replica
Transfer Rules
InfoSource transaction data
Transfer structure
3rd Request - we have captured DSO and Cube only in this request.
4th Request - Captured 2 update rules (ODS) Update Rule (Cube)
The above 3rd request failed in the testing system (successful in Quality System) and ODS is inactive in the Testing system.
Testing system Error Message:
The creation of the export DataSource failed
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object ZEOINV09
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/AZEOINV0900)
Table /BIC/AZEOINV0900 could not be activated
Return code..............: 8
Following tables must be converted
DDIC Object TABL /BIC/AZEOINV0900 has not been activated
Error when resetting ODS Object ZEOINV09 to the active version
So we have captured the data mart Datasource and created a new( 5th ) request (transported only 5th request )and transported in the below sequence
Communication structure
Datasource Replica
Transfer Rules
Infosource transaction data
Transfer structure
development to Quality - Successfully
Failed in testing system again.
How to rectify this error, please help us
Thanks,
Nithi.Hello All,
*Question -1*
I have checked the connections and typed the steps below - what i have seen in the screen.
Steps :
R/3 Connection - I have double clicked on the BT1CLNTXXX and tested the connections.
Connection Type :
Logon - 0KB , 10 KB , 20KB, 30 KB
R/3 connection:
5 msec, 0msec, 1msec,1msec,1msec
Please let me know whether RFC connection is OK or not.
Question - 2
I want to know is there is any option to check before transporting the TR from Developement to Quality - "Preview Check " the sequence , so that we can avoid the Transport failure because of TR sequence.
Regards,
Nithi. -
Hello,
I had installed ore 1.3.1 windows server 2008 on top of Oracle DB 11.2.0.3 ,but when I connect the database,it didn't work.
That is my code and error code.
ore.connect(user = "rquser", sid = "db11g", host = "....", password = "....", all = TRUE)
Got error as below:
error.oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-28575: unable to open RPC connection to external procedure agent
ORA-06512: at "RQSYS.RQEVALIMPL", line 17
ORA-06512: at "RQSYS.RQEVALIMPL", line 14
ORA-06512: at line 4
Also i have follwed the below link:
///ORE1.3-ore-server-win-x86_64-1.3,error ORA-28575: unable to open RPC connec
But failed to resolve the problem.
Below are the TNS and Listener file entry:
# listener.ora Network Configuration File: F:\OracleDB\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = EXTPROC)
(ORACLE_HOME = H:\ORA11G\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:H:\ORA11G\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.168.11.69)(PORT = 1521))
ADR_BASE_LISTENER = H:\ORA11G
-============================
# tnsnames.ora Network Configuration File: F:\OracleDB\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = EXTPROC)
(PRESENTATION = RO)
DB11G =
(DESCRIPTION =
(ADDRESS_LIST=
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.168.11.69)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = DB11G)
====================================================
Thanks
SandyHi Sandy,
If you set EXTPROCS_DLLS=ANY in the listener and then restart the listener, does it fix the problem?
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = EXTPROC)
(ORACLE_HOME = H:\ORA11G\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ANY")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.168.11.69)(PORT = 1521))
Sherry
Maybe you are looking for
-
How do I acquire multiple signals in the NI cDAQ 9172 using 2 analog input modules?
Hi everyone, Is anyone familiar with using the NI cDAQ 9172? This is my first time using it and I am not sure what exactly I am doing wrong... Alone with a NI 9233 analog input module, it works great. I can grab my 4 signals from each channel and g
-
Problem in more than one Routines in Pricing Procedure
Hi, I have one pricing procedure. I have created two 971 & 981 routines (CalType) as per my requirements. The issue is that both the routines are not working correctly if they are assigned together is the pricing procedure. But if I assign any one of
-
Hi All, I have a Q6600 on a P45 neo3. The cpu is overclocked by increasing the FSB Frequency. I would work with a greater FSB using a lower multiplier (x8), so disabling Intel EIST. The problem is that I run linux and disabling Intel EIST result in a
-
IE8 and new Hyperion Planning version
I have just been told that the new version 11.1.2 will support Windows & and IE8. Has anyone else heard this?
-
Did not get the music for which I paid
I purchased ten songs from iTunes, but bizzarely, one of them was not what I requested! I have e-mailed iTunes about this, but has anybody else experienced this? Thanks people iMac G5 Mac OS X (10.4.3)