Unable to Open RoboHelp 7 Editor

I am unable to even open the RoboHelp 7 editor. When I attempt to open it I get the standard MS message "Abode RoboHelp 7 has encountered a problem and needs to close. We are sorry for the inconvenience." My IT department doesn't know what to do to fix it. Can anyone help? Below is some information my IT department collected when they attempted to look at it.
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date: 11/27/2009
Time: 12:25:13 PM
User: N/A
Computer: UDIMOO4277
Description:
Faulting application robohtml.exe, version 7.2.1.0, faulting module msvcr80.dll, version 8.0.50727.1433, fault address 0x00014500.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 6c707041 74616369 206e6f69 6c696146
0010: 20657275 626f7220 6d74686f 78652e6c
0020: 2e372065 2e312e32 6e692030 76736d20
0030: 30387263 6c6c642e 302e3820 3730352e
0040: 312e3732 20333334 6f207461 65736666
0050: 30302074 35343130 0a0d3030
Thanks!

If you are using Vista, try right clicking the shortcut and selecting Run As Administrator.
Otherwise, I would try a repair or a reinstall.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Similar Messages

Unable to open Elements 12 Editor

Unable to open Elements 12. Have changed password. Still won't open.

Follow the steps in this ling re sign in
Activation & Deactivation Help

Unable to open raw file editor in PSE8

Hi,
I have just purchased PSE8 and after installing on my laptop, I cannot open a camera raw file in the raw file editor. Instead in opens directly in the PSE8 editor.
My software and camera details are as follows: Adobe Photoshop Elements Language Version: 8.0.0 (8.0 (20090905.r.605812))
Operating System: Windows Vista 32-bit Version: 6.0 Service Pack 2le editor.
My camera is a Nikon D80 and raw files have the extension .NEF
PSE 8 camera raw plugin is version 5.5.0.97
I have tried removing PSE 8 and the plugin as defined in solution 2 at:
http://kb2.adobe.com/cps/407/kb407110.html
I did have a trial version of PSE8 installed before purchase, but removed it from my laptop as defined above before installing PSE8.
Any help appreciated.
Best regards,
TonyMV8

Thanks for your reply. I have followed the instructions as defined at: http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Problems_open ing_raw and the problem is still there.
I have alos completly removed PSE8 and the associated plugins form my laptop including empting the trash bin and then started reloaded PSE8, but hte end result does not change anything.
You asked how I was opening a raw file, well what I am doing is as follows:
1. I open PSE8 from my desktop.
2. Select 'Edit' and PSE8 Editor opens.
3. Select 'File' then 'Open'
4. Highlight a 'NEF' with 'Files of type: set to 'All Formats' and select 'Open' ( I have also tried changing the 'All formats' to raw files, but this does not change anything).
5. The raw file opens within PSE8, and not the raw editor.
At stage 5 on my desktop PC running under XP in PSE8, the raw editor appears as per below.
Any thoughts and ideas appreciated.
Best regards,
TonyMV8

Unable to open Tiff in editor

PSE 9
Windows 7 64 bit
I sporadically receive the error " could not complete your request because an unexpected end-of-file was encountered" when trying to open layered .tif files in the pse editor. These are all files that never had problems on my older machine with XP pse 7. It is only affecting some of my files and does not seem to be based on size. All files (problematic and not) are stored on an external hd that is always turned on before booting the pc and never turned off before. Any ideas on what to do?

function(){return A.apply(null,[this].concat($A(arguments)))}
99jon wrote:
This is a windows setting not an internet setting. It relates to user account privileges. So I must disagree.
And you don't see permanently loosening permissions as relevant to security concerns??
function(){return A.apply(null,[this].concat($A(arguments)))}
99jon wrote:
In this thread you recommended “Run As Administrator” which circumvents the original user account settings; so you seem to be contradicting yourself.
You misunderstand the relation of "Run as administrator" and user account settings. But thanks for your participation in the forums, anyway. Just a word of caution to folks who've been monitoring this discussion: run away from any reccommendation to permanently weaken your security.
Ken

Unable to open RoboHelp

When I try to launch RoboHelp, a windows installer opens and
says "Preparing to Install." After an hour or so, it times out.
I've tried reinstalling RoboHelp, but to no avail.

I think this is something specific to the PC. Can you try
installing it on another PC just to see if it works OK. Uninstall
it afterwards.
If, as I suspect, it installs OK on the other machine and
opens repeatedly, uou then have two options. One would be to
contact Adobe Support as I don't think this problem has hit the
forums before but it may have hit them. The other would be to try a
new profile on your PC but that would involve the loss of all the
settings on your applications.
Also before posting this I just ran through the thread again,
Colum mentioned firewall settings and I don't think you responded
specifically to that. I had a problem with RoboScreenCapture
wanting to be activated after every reboot. Not quite the same
problem but close. That turned out to be because the firewall was
only allowing that application one way traffic rather than two way.

Robohelp 7 open Robohelp 9 project?

as I search through internet, I understand that robohelp 7 unable to open robohelp 9 project
we have two robohelp 7 licenses and three robohelp 9 licenses
when working on project in robohelp 9, it need to upgrade the project, but robohelp 7 is unable to open the project after upgraded
Is it any way opening Robohelp 9 project(converted from version 7 project) in Robohelp 7?
Is it upgrade Robohelp 7 to 9 is the only way? We do not wish to upgrade is because i am wondering if later Adobe release robohelp 10, and by that time we need more robohelp license and we purchased additional license, we will need to upgrade all other old robohelp product?

Hello again
Yep, conditional tagging is handled in the project before you compile or generate, so indeed they would be lost as would any information you excluded via the tab and build expression.
Not perfect, but at least you get a project you may continue editing in version 7.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Unable to open photo editor in photoshop elements 11

After initial install on my windows 7 64 bit system , all aspects of the software worked for about a month and then I could not open the photo editor. All other aspects of this product opens and works fine . Unfotunatly I cannot use the editor or open photos previously modified in the editor. I can open the editor if I log in in safe mode but no other way. I have done 2-3 clean installs as described in previous articles, there are no errors just won't open. Any ideas>?

Went through verified firewall disabled and turned off defender ,previously removed antivirus that I was using. Uninstalled and reinsatalled now recieving error "
PhotoshopElementsEditor.exe - Application Error
The application was unable to start correctly (0xc0000142). Click OK to close the application.
OK
Still not opening., Every other aspect seems to be working fine , just not the editor.

Unable to open any programs in ABAP editor

Hi folks i'm unable to open any programs in ABAP Editor.
When ever i try to open any program it goes to short dump.
Even when i try to open STO4 to view error log.
it shows following message
Short text
    Runtime error, short dump could not be written.
What happened?
    Error in the ABAP Application Program
    The current ABAP program " " had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Unfortunately, the system cannot carry out a detailed analysis of the
    error, as the table SNAP (which gathers information at the time of
    termination) does not contain a suitable short dump.
Information About Termination Point in XSLT Prog.
    Termination occurred in the XSLT program " ".
    The call took place using CALL TRANSFORMATION from the ABAP
    program specified below.
    In the source code, the termination point is in line " "
    of the (Include) program " ".
Internal notes
    The termination was triggered in function " "
    of the SAP kernel, in line " " of the module " ".
    The internal operation just processed is " ".
    Internal mode was started at " ".

hi,
check whether any exit has been implemented for se38 and because of some statements in that it may goto dump.
also try to open ur program from SE80.if u have access to se80 then u can do it from there itself.
reward points if hlpful.

I downloaded and paid for Photoshop Elements 13. I am unable to open the editor at all.

I downloaded, and paid for, Photoshop Elements 13. At first I was able to open the editor only when I made an adaption to the Task Manager Processes(at the recommendation of one of the forums) but now I am unable to open the editor at all.

Can you try opening Editor directly from the exe available at:
C:\Program Files\Adobe\Photoshop Elements 13\PhotoshopElementsEditor.exe
If it still does not open, are you seeing an error message when you try to open Editor?
Thanks,
Anwesha

I am unable to open Organizer or Photo Editor this morning of elements 12 and don't know why.

I am unable to open Organizer or Photo Editor in elements 12 this morning and don't know why. Any ideas??

OK,
Good to hear that you are running at the moment.
The causes for organizer and the editor to stop working are usually different. For both to be affected, I would tend to suspect disk space problems. Probably a good idea to check that you have plenty of free space.
Please let us know if you have problems again and we can try troubleshooting.
Brian

Unable to open application | e6 photo editor

I have formatted my phonr (e6).
After that I am unable open Photo editor. It says "unable to open application".
Also unable to see photo edit option in the gallery.
Please help me.
Mirza

Hi Ziyaul Islam,
Thanks for your post and welcome to the Nokia forum.
In order to fix this issue, I would advise you to perform a hard reset. First of all, back up your data using Nokia Suite (Tools > Back up). Once your data is fully backed up, type *#7370# on the keypad. Default lock code is 12345.
The hard reset will dellete all your personal information, that's why a back up is very important.
Alternatively, you may also check for updates on Nokia Suite (by going to Tools > Updates).
If the problem persists, I would suggest you to contact your local Nokia care.
Hope this helps and feel free to post any other questions you may have.
Regards,
Pfrancoise
If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated.

Unable to Open Feed Editor for iTunes U Collection

I was starting to upload new files to the Exploring Numerical Methods collection of USF on iTunes U when Safari crashed unexpectedly. When I logged back in to the PSM I was unable to open Exploring Numerical Methods from the collections page by clicking on the Apple Hosted link. It stays on the Collections listing page of PSM. Other collections open to edit okay. Here is the link to Exploring Numerical Methods: https://phobos.apple.com/WebObjects/DZStudio.woa/wa/viewPodcast?dz_in=14&id=4027 27090&wosid=ybVpvFQxyQQtYcmJYQpADM

Hi Rajender,
To know how to enable SQL Editor in Visual Composer and the security risks involved, have a look at the following links:
Adding a parameter for Visual Composer
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393338373436%7d">SAP Note Number 938746 - Security Risks with the SQL Editor and MDX Editor</a>
SQL Editor
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/f9facc992e6bece10000000a11466f/frameset.htm">Configuring Optional Properties in Visual Administrator</a>
Bye
Ankur
Do reward points if it helps!!

Opening RoboHelp HTML ver. 9.0 Projects - Out of memory error

I have just updated to Technical Communication Suite 3 which includes RoboHelp HTML 9. I have installed all of the latest updates as of 6/20/2011. I am running Windows 7 Ultimate 64-bit OS, 6GB RAM. Note that I still have RoboHelp HTML 7 installed on the machine.
I can use all of the Technical Communication Suite applications (e.g., FrameMaker 10, PhotoShop CS5, etc) except RoboHelp 9.0. When I attempt to open any project (including the sample projects listed on the Starter screen, I receive the error:
"Unable to open the file c:\users\myname\Document\My RoboHelp Projects\Adobe RoboHelp 9\myprojectfolder\myprojectname\$rhvariable$.htm. Out of memory starting the editor services."
Please let me know if anyone has encountered this error and has resolved it.
Thanks!
Andrea

Hi Jeff,
I am getting this error message.

Unable to open project files can filters effect this ?

Hi Guys ! I have been a long time reader of the forums and from just observing have always learned a great deal from the discussions. Up until now I have been able to read through post and always find an answer from some of the great advice. As a relatively new Final Cut Editor I have limited knowledge but can edit and have learned enough to structure my work flow and put a project together how I would like it and complete with good results.
I have read a few post on this subject “Unable to open project file” but haven’t seen any with the specifics as my own.
Up until yesterday my files were opening all fine and working perfectly until this last night I had saved and shut down my Mac in the normal fashion. When I tried to open two specific files I was greeted with the infamous “Unable to open Project Files”. These as I can gather are the only two files that will not open and both files have used the RIVER ROCK– Chromatic Glow, or Day for Night Free downloadable Filters in the last 2 weeks could this be the reason ?
I have all the recent updates and have tried going into the Auto Vault and Render files to access the last available versions of these project files. I am able to access those but am only left with a much earlier version of the same project like a version a week earlier without vital changes.
So I would pretty much have to start again.
Any Help would be greatly appreciated
Regards
FC

Hi Tom thanks very much for your reply! , I un mounted the external drive , and reset and created a temporary scratch disk on My Hardrive to get Fce to start.
The 3 projects I have been working on which all were rendered on the 2nd of April around 3 in the afternoon. Two of the Files using the River rock filters are Not accessible from the most recent and up to date versions. The one remaining Project is able to be opened and is the only one not using the filters.
The two files accessed from the auto save vaults before April 1st up to 3pm April 2nd are working and are able to be opened with no problem. Everything after that is not opening which is a real downer as its where the project became near completion but at least I have a time frame of when things started to go wrong.
What would you suggest?

Unable to open project on different computer

Hi all,
I've got an interesting situation. I created a project on a Mac Pro, then used FCPX to consolidate media onto an external drive. Then, I realized that the "Organize Media" was needed to get all original files correctly located in the FCPX media folder, so I did that and the project would then open with my laptop (which I used as the test computer). Now, I handed the project over to another using a newer MBP than mine, and for some reason, he has been unable to open the project or even view the event media.
He's updated FCPX to 10.0.1, rebooted the computer, trashed FCP prefs, copied the Motion Templates to his Movies folder (I made a copy on the external drive as I have several templates for the project), and has done a permissions repair. All without change. The Mac Pro is a 2010 12-core running the latest version of Lion and my MBP test computer is running the latest version of Snow Leopard. His computer is running Snow Leopard.
Any ideas?
Thanks,
Lawrence

Tom was certainly right about the duplicate function being the best way to copy a project. However, the problem here was actually two-part. First, the editor did not tell me that he was able to see the project after updating to 10.0.1, but the project had missing media. He just said it still wasn't working.
Second, the missing media was only a result of him not properly copying the Motion Templates folder from the hard drive to his Movies folder.
Thanks to Tom for suggesting a better way to copy these projects, though! I think I'm going to use that, and Singlemizer to remove the duplicated files outside the "Original Media" folder to keep from building up duplicated media.
Lawrence

Unable to Open RoboHelp 7 Editor

Similar Messages

Maybe you are looking for