Unable to open RPD in online mode OBIEE 11g.

Hi All,
We are using OBIEE 11g . We are unable to connect to BI Admin in online mode. All servers (admin server, biserver) are up and running fine. Checked the staus of all the servers in command prompt, it showed ALIVE.
We are able to connect in offline mode.
Able to connect till yesterday and faced no problems. suddenly problem occured. Once the problem occured restarted all the servers but still unable to connect in online mode.
ERROR Description:[nQSError:43126] Authentication failed:Invalid Username/Password.
[nQSError:37001] could not connect to the BI Server instance.
Thanks.

Hi Thnaks for the reply.
We are able to open the same repository in offline mode and furhte rmore even we are able to create the new repository with th esame database. One thing we noticed is our ip address has been changed, is this cusing the error..??
One more question:
Our database has been SHIFTED to new system and got new tns details(hostname, service name etc). What changes do i need to do with respect to the new database in obiee 11g application so that I can connect to the database with same repository.
The things I have done:
1.Copied the new tnsnames file to oracleBI1\network\admin
2.Created the new DSN with respect to new databse service name.

Similar Messages

Unable to Open RPD in online mode by using the Admin tool in OBIEE 11g.

Hi All,
I Installed OBIEE 11g (11.1.1.5) in Linux Box.
When I am trying to Open the RPD in online mode by using the Admin tool, I am facing the below error.
Logon failed due to:[nqsError:43113] Message returned from obis
[nQSError:13037] Cannot connect to BI Security Service,please make sure this is running properly (with SSL ot not) in EM.
[nQSError:37001] Couldnot connect to the Oracle BI Server Instance.
All my services are up and the status are Alive,My biserver is in Running Mode and I am able to open the Answers page too.
I am able to open the same RPD in Offline mode but not in Online mode.
I Created a System DSN in ODBC Data Source Administrator for opening the RPD by using the OracleBIServer1 driver,still the issue doesnt resolve.
Any help is highly appreciated.
Thanks,
Praveen.
Edited by: 885630 on Dec 21, 2011 3:33 AM

Hi All,
This question is answered.
The Resolution is
While Installing the RCU i created two instances so the RPD is not able to take the correct instance.After deleting the other instance now i am able to open the RPD in online mode as it is pointing to only one instance.
Thanks,
Praveen.

Unable to conect to BI Admin in online mode OBIEE 11g

Hi All,
We are using OBIEE 11g . We are unable to connect to BI Admin in online mode. All servers (admin server, biserver) are up and running fine. Checked the staus of all the servers in command prompt, it showed ALIVE.
We are able to connect in offline mode.
Able to connect till yesterday and faced no problems. suddenly problem occured. Once the problem occured restarted all the servers but still unable to connect in online mode.
ERROR Description:[nQSError:43126] Authentication failed:Invalid Username/Password.
[nQSError:37001] could not connect to the BI Server instance.
Thanks.
Edited by: RAJ on Apr 12, 2011 11:14 PM

Can you find any errors in NQSAdminTool.log?
Please see if these docs help.
Cannot Open Repository In Online Mode with BI Administration Tool [ID 850921.1]
Unable To Access RPD In Online Mode Using The Oracle BI Administration Tool, Error "Logon Failed" [ID 1206870.1]
How to fix “Unable to Sign in. An error occured during Authentication" error when a user logs in OBIEE 11g [ID 1302924.1]
Cannot Log Into OBIEE Administrator RPD File In Online Mode [ID 1128883.1]
Thanks,
Hussein

Not able to open rpd in online mode

I am not able to open rpd in online mode.
It just says that it opens in Read Only mode.
The service is up and running. Still I get this problem.
When the service is turned off and I try to open the rpd in offline mode too, it gives me the same problem.
I am facing this issue even when the NQConfig.ini file is pointing to someother rpd.
This issue is not with all the rpds in my Repository folder but only with few rpds. I have observed these probs with the latest two rpds each time.
Can someone pls suggest me on this.
Thanks,
Swetha

Yes.. so far the latest 2 rpds are not working.. (last two rpds that I have saved.. the older ones are working fine)

Cannot open repository in online mode

I cannot open repository in ONLINE mode
I'm using Oracle BI Administration tool version 11.1.1.3 and Oracle Enterprise Manager 11g version 11.1.1.3.
My procedure is:
- Enterprise Manage: open repository, apply changes, restart services
- Administration tool: CTRL+L (open online) and type username and password. But Open button in administration tool is always grayed.
Regards
Andrej

Hi,
Can you please check the below mentioned link and follow the same and update-
Unable to open RPD in ONLINE Mode
Hope this helped/ answered
Regards
MuRam

Error while opening the OBIA 7.9.6.3 RPD in Online mode

[nQSError:13024] Successful completion of init block 'EBS Security Context' is required.
[nQSError:37001] Could not connect to the Oracle BI Server instance
Edited by: 993897 on Apr 25, 2013 4:48 AM

Thanks
BI DSN it is working fine...
Actually Integrated the BI with Oracle EBS R1213....
Still It return the Same error when opening the RPD in online mode
Error:
Logon failed due to: [nQSError: 43113] Message returned from OBIS.
[nQSError:13024] Successful completion of init block 'EBS Security Context' is required.
[nQSError:37001] Could not connect to the Oracle BI Server instance

Logging in to RPD in online mode fails after upgrading rpd from 10G to 11g

Hello guys
I have an issue here..
I have everything working in 10g using external table authentications by having 2 init blocks:
ISAuthorization --- row wize initailization:
select 'GROUP', UG.GROUPNAME from USER_USERGROUPS FFF, USER U, USERGROUP UG where
UG.ID = FFF.USERGROUPS and
U.ID = FFF.IS_SEC_USER and
UPPER(U.USERNAME) = UPPER(':USER')
ISAuthentication -- 5 target variables: User, email, loglevel,password, displayname
select USERNAME, DISPLAYNAME, LOGLEVEL, EMAIL,PASSWORD from IS_SEC_USER
where UPPER(USERNAME) = UPPER(':USER') and PASSWORD = IS_GET_MD5_VAL(':PASSWORD') ----- IS_GET_MD5_VAL is nothing but a store proc we have to encrypt passwords.
Everything works perfectly in 10G where a new user gets created in the DB table, passwords assigned and encrypted, then I am able to log in using the new user.
The admin user in 10G environment was 'Administrator/admin' which was native in 10g. During the upgrade process, I have set the new password for Administrator to be 'admin123' and upgrade was a success.
Now that I have upgraded the rpd, when I open it in offline mode, I was successful by entering Administrator/admin123. However, when I try to open it in online mode, I encounter the below error:
nqserror:13024 successful completion of initialization block "*ISAuthentication*" is required
My 11g version is 11.1.1.6.5
Any thoughts on how I can debug this issue?
Thanks in advance

Just an update:
In my below set up:
ISAuthentication -- 5 target variables: User, email, loglevel,password, displayname
select USERNAME, DISPLAYNAME, LOGLEVEL, EMAIL,PASSWORD from IS_SEC_USER
where UPPER(USERNAME) = UPPER(':USER') and PASSWORD = IS_GET_MD5_VAL(':PASSWORD')
Variable User and password was 'Administrator' and 'admin' in 10G when I ran the test on the initialization block, however, when I test the same block in 11g rpd, these 2 variables are blank..
I do have 'Administrator' user created through weblogic and it is showing up in the rpd.
Any thoughts on why the variable is not working in 11g rpd?
Thanks

Unable to open RPD in Windows 8 (OBI 11.1.1.7)

Hello All,
I am unable to open RPD in Windows 8 (OBI 11.1.1.7).
Just the command prompt opens up and then hangs and end up with error.
[nQSError: 47077] NQSConfig.ini file was not found. Make sure your enviroment is set-up properly.
I installed 32 bit client but that did not work.
Can someone give me any pointer?
Regards,
KN

check this
Error: nQSError:47077 Error When Installing OBIA 7.9.6.4 in OBIEE 11.1.1.7 (Doc ID 1549631.1)

Unable to import table or columns in OBIEE 11G RPD

Hi All,
We are unable to import table into the RPD using OCI 10G/11G to import the table then the import box open but we are unable to see the tables below the schema name. When we use ODBC 3.5 and created a DSN for the database then we are able to see all the tables and import them. But the problem here is that when we are using window server 7 64 bit to install client and then importing the table ODBC is not working fine as well.
Please note that we are using OBIEE 11G which is installed on unix box and we connect to RPD using client installed on windows server.
Appreciate all the help in advance.
Thanks,
Mohit

Hi Sayak,
This means we need to installed Oracle client to resolve this problem. Can you please share if you have some knowledge regarding the same.
Thanks,
Mohit

RPD deployment issue in OBIEE 11G

Hi All,
I am getting issue while deploying my own RPD. I followed the below link to deply but when i clicked on Lock & Edit button , It was not giving me the option to choose the new RPD. That browse button was disable.
http://prolynxuk.com/blog/?tag=obiee-11g
Please help if anyone knows .
thanks...

Hi,
Did you clikc on Deploy tab->Repository->Lock & Edit button configuration?
After you click browse option gets enabled and you can see release configuration above.Can you see release configuration?
Regards,
Srikanth

RPD Patching ISSUES in OBIEE 11G

Hi all,
when i am doing the RPD patching in OBIEE 11G i ll be missing one subject area in the process of merging can some one provide the solution for this.
i have two rpds one rpd contains the two subject areas and another rpd contains the single subject area while in the process of merging
i am getting everything getting correct but expect the subject areas. i am missing the one subject areas.
pls provide the solution for this
Thanks,

Are you patching or merging? I've found the patching to be very hit and miss.
Robert

Unable to import tables through ODBC in obiee 11g

Hi all,
In obiee 11g,
OBIEE 11g is successfully installed but when i am trying to import the tables in RPD through odbc then it is giving a problem.
I have tried using the OCI and it is working fine but can anyone tell me why it is not happening through odbc.
created the dSN for it and it is working fine.
any help would be appreciated.
thanks in advance.

Hi,
You need do full installation of obiee11g.
Go through this..May help you.Not getting connected to a data source in obiee 11g
How to install 11g ODBC client drivers to access OBIEE 11g server?
Regards,
Srikanth

Unable to sign in presentation services in OBIEE 11g

Hi All,
I had installed OBIEE11g. Installation gone fine. all the services are up and running except scheduler.
I am able to login to Weblogic console and Enterprise manager, but I am not able to login to Presentation services. When I try to login it says Unable to Sign In (An Invalied User Name and Password).
Can any one guide me to overcome the issue.
Regards,
Kumar

Hi,
Go through this.. OBIEE 11g Cluster Controller Failed to start
Thanks,
Srikanth

Unable to connect to Active directory from obiee 11g

Hi Gurus,
I was trying to integrate Active directory into OBIEE 11g. Followed the Oracle documentation and Rittman Mead too but cannot get past a connection issue. I create a new provider,provide the connection details,use bissytemuser in AD as the Principal but when WLS is bounced/restarted, it fails to connect and throws the below error:
"Cannot initialize identity store, cause: oracle.security.idm.ConfigurationException: javax.naming.CommunicationException: <hostname>:389 [Root exception is java.net.UnknownHostException: <hostname>]".
Not sure if this makes a difference but admin and managed server come up but not analytics.
Please help me out with scenarios to test if my bi server is connecting to AD or not?
Thanks,
Dan

To answer this need more details.
btw: I would suggest to check these
Property Name=virtualize
Value=true
and
Control Flag list to OPTIONAL
you may send me email

Firefox is crashing continuously when I open it. I'm unable to open it in safe mode and reinstalling the application has not worked.

I've been running Firefox v. 18.0.2 and for a few days the application continually crashes everytime I open it. I'm currently unable to get into safe mode and this is occurring on all profiles on the machine. I've went through and updated all my Add-Ons however the issue persists. I decided to re-install the application wiping out any configurations that were previously configured. I've also tried deleting the entire %APPDATA%\Mozilla folder. Up until this point I am unable to get Firefox running.

1. Click the Windows Start button, and select Run... on Windows XP or press Windows Key + R on Windows Vista/7. Type in "%APPDATA%\Mozilla\Firefox\Crash Reports\submitted" including the quotation marks and click OK.
2. In the resulting folder will be a text file for each crash report you have submitted. Using the View menu, arrange them by date to find out which is the newest file; and double-click on it to open it.
3. Report back to us with the latest crash ids.

Unable to open RPD in online mode OBIEE 11g.

Similar Messages

Maybe you are looking for