Unable to open sequence diagram created by earlier version of JDeveloper

About 2 years back, we were using the JDeveloper to create sequence diagrams using the latest version of JDeveloper at that time. The diagrams were created and saved by Jdeveloper in ".oxd_seq" files.
We are now trying to open these diagrams using the JDeveloper version of Studio Edition Version 11.1.1.3.0. It is not working for ".oxd_seq" file. Is there any way we can recover those diagrams in JDeveloper 11.1.1.3.0?

Hi Drew
Normally it's pretty simple.
1. Copy the .CP file(s) from source computer to intermediate media. (Network server, USB drive, CD, Etc.)
2. Copy .CP file(s) from intermediate media to destination PC.
3. Open Captivate and open file(s) in new location on destination PC.
At no point should you ever consider leaving the .CP file on a network drive and opening Captivate and browsing to the file to make edits while it is in the network location. You always want to work locally.
Another thing to consider is that Captivate seems touchy with CP files. You will want to ensure that all PCs are using the same version of Captivate. This includes patches. I wouldn't want to save a .CP file from a patched version 4 and expect to open it without issues on an unpatched version 4.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

Itunes will not open, message says library was created with earlier version. what now?,

itunes will not open, message says library was created with earlier version. what do i do?

Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

Logic will not open files created with earlier versions?

Logic Pro 9 will not open willnot open files created in earlier versions advising that attempts should be mad using Logic pro 7. My Mac Pro wil not open this version of Logic "because PowerPC applkcations are no longer supported." Any help would be very much appreciated since I need to have books reprinted.
Thanks

Pancenter wrote:
Won't help, the "installer" (through Logic 8) uses some PPC code, this person is running Lion which means no version of 7 or 8 can be installed.
Hi
I think that the PPC installer can be worked around (?):
Make disk images of the Install Disks, mount them all, then use Pacifist to run the Install process
Looks like it should work here..
CCT

HT1222 my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix))

my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix)

So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

Earlier Versions of JDeveloper?

Does anyone know where I could get an earlier version of
JDeveloper? Possibly 1.5?
Thanks
Jesse
null

I'm going to use this ugly workaround:
af|panelCollection::statusbar{
display: none;
.showStatusBar af|panelCollection::statusbar{
display: block;
}This will hide status bar on all af:panelCollections, and I will use style class showStatuBar for very few places where I need status bar.

I can't open itunes - error message - created by earlier version of itunes

Hi,
My sister used my itunes to set up her new ipod nano but now when I click on the itunes icon on my laptop I get an error message that says it can't open because it was created by an earlier version of itunes. I think she upgraded itunes when she registered her ipod. Any idea how I can now get itunes to open?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Can't open projects with Imovie 5 that were created with earlier version

I can't open my Imovie projects that I created when using Mac OS 9.2 now that I'm using Tiger and Imovie 5.
I'm not sure what version of Imovie I created them with. Do I need to find an earlier version and open them in the classic environment, or is there some way of converting or importing them?
iBook G4 Mac OS X (10.4.2)

Theoretically iMovie 5 can convert old projects, but projects created in Mac OS 9.2 can be quite difficult, for OS 9 is very different than OS X. More about that here:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=1677339
Your best option is to use the version of iMovie that you used originally to edit the project. If the projects are really old, that may require starting up your Mac in Mac OS 9 (instead of running iMovie in the Classic environment, which is Mac OS 9 running inside Mac OS X.)
Your best solution may be to boot up in Mac OS 9 and use your old version of iMovie to export the project back to the camera, then boot into Mac OS X and import the tape into iMovie 5.
If you don't have a camera, export to a Full Quality DV movie, then import that movie into iMovie 5.
The camera will (probably) deliver the clips to iMovie 5 as clips, while the export to a Full Quality DV movie will not.
By the way, to see which version of iMovie last edited the project, drop the project file on the TextEdit icon in the Dock. The version is shown at the top of the file.
iMovie 2.1.2 was the first version to run in OS X, I believe. The last version to run in OS 9 had the same version number, unfortunately.
If your Mac doesn't let you start up in Mac OS 9, then say more about exactly what happens when you try to convert the project. Do you get error messages? What are they?
Karl

I am unable to open my iWeb-created web site, for which I have a backup.

My web site is online and I want to access it to make changes. It does not appear when I open iweb, but I have a backup copy on my desktop. When I move backup onto icon for iweb, it doesn't open it. How can I open it again? Since my last opening of it, I've installed the new OS-X software - 10.9
I'm not very computer literate, but I did download the file:
file:///Users/monicaanderson/.Trash/iWeb%20Switch%20Domain.app/
file:///Users/monicaanderson/.Trash/iWebDrop%2013-50-25-235.app/
I copied these links from my download folder and neither would open.
Can anyone help me -- in simple terms
Thank you

iWeb has no import facility, so is unable to open any published website at all.
All the data from your iWeb sites is stored in what is called your domain.sites files. These can be located under your User Library/Application Support/iWeb/domain.sites. Find this file and double click it and iWeb will open it.
The User Library is hidden in Mavericks, so to display it you need to click on the Go menu at the top and then click the alt key and your User Library will then be displayed and then you need to go to Application Support and then iWeb and then you will find your domain.sites files from there.
If you can't find these files, then you are looking at re-building your site from scratch and there is no way in which you can alter your site because unfortunately the backup of your site that you need is your domain.sites files and not a published version - this is not good in iWeb because iWeb has no import facility so cannot open it.

I cannot open a document from an earlier version of pages.

Hope someone has a helpful solution for me. I am trying to access my resume that I did in an earlier version of Pages. I tried to open it today and saw an error saying that the document could not be opened. I have tried researching this and basically have no solution. I need my resume and don't know what to do. Has anyone else figured out a solution other than blowing up their computer?
Sharon

Copy/paste from TextEdit works. The use of Pages v5 has created more problems than user solutions. Make certain you export to Word format as a backup. Pages v5.5.1 will make a huge 500Kb Word document. You will need to open and save it out from either MS Word, or the free LibreOffice to reduce it down to small double-digits in size.
Sharon, there is a Yosemite community under the general category of MacOS & System Software. Post your Yosemite questions there, and you should get competent answers to your questions. Responders to your question(s) will want to know the year and make of your Mac, how much memory is installed, and if you upgraded to Yosemite from Mavericks, or an older OS X installation. The Apple > About this Mac can provide useful info. Be as concise as you can while still conveying the issue you want resolved. If you are running anti-virus software, state that as it is a known performance and stability decrement for OS X.
Yosemite is now one revision beyond the base release. Each new iteration of updates to Yosemite will fix bugs, attend to some usability issues, and improve performance. I am running Yosemite on a 2014 MacBook Air with 4GB of memory. It has been flawless — if not overly art-deco for my taste.

Premiere Pro CC 2014 seems to Corrupt projects created with earlier versions

I have opened in PPro CC 2014 projects created in PPro CS6 or PPro CC. Every time PPro crashed and got the message " PPro Debug Event - PPro encountered a major problem and has stopped working" After that the project seemed corrupted and could not be opened even in earlier versions.
I get the following message
Première Pro Debug Event (Title of the window)
Premiere Pro has encountered an error
[c:\caravan\releases 2014.09\shared\adobe\mediacore\mediafoundation\api\incK... (can't read the res...)
Then there is a "continue" button if I hit this button I get the following window
Following a serious error PPro must shut down. The program will try to record your current project.
Has anyone encountered this problem?
I don't dare open any old project. help!

Hi there!
I´ve updated to latest version and then opened my project and got this error.
Then I found in a forum that I should delete the ADOBE folder in \my documents
I´ve deleted and then I could open the file again.
But the .MP4 and some other video files doesn´t open.
I saw that the 'Effect Presets and Custom Items.prfpset' file on \my documents\adobe\premiere Pro\8.0\Profile-myprofilename was causing the error.
I also saw in other forum that I should rename Adobe folder to old.adobe from \userfolder\appdata\roaming and \userfolder\appdata\local but this hasn´t solved the problem.
I tried also to reinstall Quicktime and K-Lite Codec Pack but the problem persists.
Have you found any solution??
Regards
Lucas

CS3 breaks site created in earlier versions

I originally created my site, www.inboxer.com, using
Dreamweaver MX. I upgraded with each version and had no significant
problems until the CS3 upgrade. My three biggest problems:
1. Design view no longer works. When I open a file in split
view, the design section is blank. But, when I make a minor edit,
such as adding a space character, and hit refresh, the design
appears. Unfortunately, after a few edits, the design disappears
again.
When this happens, the design view shows that it is in the
<head> tag -- even though I am editing the code in another
section. I do have a </head> tag. And, again, this code
worked fine in CS2.
I am also finding extra carat characters, <, in the code.
These carats are almost always either before the body command or at
the end of the document.
2. The library updates no longer work at all.
3. I have tried to detach from the templates and the
libraries, just so that I can edit the raw HTML, but I get an
unexpected end of file message when I try to save.
I am totally out of ideas and these problems make CS3
unusable. Do you have any ideas on how to fix the design view,
library update, or unexpected end of file?

> 1. Design view no longer works. When I open a file in
split view, the
> design
> section is blank.
This almost ALWAYS means that there are coding errors on the
page that were
tolerated by the earlier versions but cannot be rendered by
CS3. We would
need to see your code to know what those might be, but you
can probably find
them by validating the page here -
http://validator.w3.org
> And, again, this code worked fine in CS2.
There was no DW CS2 - I assume you meant DW8.
> I am also finding extra carat characters, <, in the
code. These carats
> are
> almost always either before the body command or at the
end of the
> document.
DW would never put these extra characters in your code. They
can only be
the result of operator error.
> 2. The library updates no longer work at all.
Try recreating the site cache (SITE | Advanced > Recreate
Site Cache). If
that fails then we will have to explore your site definition
a bit.
> 3. I have tried to detach from the templates and the
libraries, just so
> that
> I can edit the raw HTML, but I get an unexpected end of
file message when
> I try
> to save.
Your pages' code is seriously hosed. I think we will have to
see the
template to go further.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"elleirdad" <[email protected]> wrote in
message
news:[email protected]...
>I originally created my site, www.inboxer.com, using
Dreamweaver MX. I
> upgraded with each version and had no significant
problems until the CS3
> upgrade. My three biggest problems:
>
> 1. Design view no longer works. When I open a file in
split view, the
> design
> section is blank. But, when I make a minor edit, such as
adding a space
> character, and hit refresh, the design appears.
Unfortunately, after a
> few
> edits, the design disappears again.
>
> When this happens, the design view shows that it is in
the <head> tag --
> even
> though I am editing the code in another section. I do
have a </head> tag.
> And, again, this code worked fine in CS2.
>
> I am also finding extra carat characters, <, in the
code. These carats
> are
> almost always either before the body command or at the
end of the
> document.
>
> 2. The library updates no longer work at all.
>
> 3. I have tried to detach from the templates and the
libraries, just so
> that
> I can edit the raw HTML, but I get an unexpected end of
file message when
> I try
> to save.
>
> I am totally out of ideas and these problems make CS3
unusable. Do you
> have
> any ideas on how to fix the design view, library update,
or unexpected end
> of
> file?
>

Opening projects in CS4 from earlier versions of Premiere

I have various projects in Premiere 2.0. They work fine.
I tried opening one in Premiere CS4. It mostly works, but I found a small hickup where a transition (cross disolve) is quite messed up. Otherwise, it seems the project is playing the same in CS4.
My question is: how accurate is it to open projects in CS4 from an earlier version? I don't really want to have to go through every second of every project to make sure it works properly, yet I would like to upgrade to CS4.
What's the normal protocol for this? I'm sure people deal with having to open projects from earlier version of Premiere all the time.

Harm,
Thanks for your answer -- it's helpful. I will follow your advice.
What blows my mind is what the legions of editors out there do when they have to old up an old project? This must happen all the time!
Do editors have to maintain two machines -- one with the old version of Premiere to open up their old project, and another machine to work on new projects? Oh, I guess they need one machine for each version they've ever created a Premiere project in. That's like 5 machines.
Seriously, what to people do when they have to open up an old project for whatever reason? It's seems like if you open it up in the latest version of Premiere, you would have to go through every second of the project very carefully to make sure there are errors introduced -- way time consuming.

How do I import images created in earlier versions of Aperture and saved to DVD as an Aperture library into Aperture 3.2.1?

When I insert the DVD into my MacPro the disk appears as though it is blank, with the little 'burn' icon in the top right
When I insert the DVD into my macbook it shows the full Aperture library structure and when I allow file sharing between the machines the MacPro can also recognises the files
I suspect I am making a basic error somewhere as the images are clearly all there. This doesnt just occur for one DVD, I have dozens that are all perfroming in the same way when I try to import files created in an earlier version of Aperture back into the version I am now using, 3.2.1
Any suggestions would be greatly appreciated
Reiss.

To get the old library into Aperture it will need to be upgrade. To do this you will need to copy the library off the DVD onto our HD and then open Aperture on this library. Aperture should then upgrade the library to the latest version.

Problem opening PC files created on latest version of CS5 on Mac

Hi.
We´re a creative team in my company of four people, three mac users and one pc user. We recently all subscribed to the creative cloud so that we allways have the latest version of CS5, but there seems to be a problem with all files edited or created from the PC user.
We've (mac users, all three) tried to open the files either created or edited by the PC user and we're told that this was created by a newer version and is not possible. Trying to understand why this message occure when all three macs where updated with creative cloud after the PC user.

your title is confusing.
the pc user is using cc 2014 apps, correct?
the mac users are using cc 2014 apps, correct?
if so, there should be no problem.
if someone is using cs5 to try and open a file created by a cc 2014 app, you will see the problem you described.

I am unable to edit a form created with LiveCycle version 8.5 with LiveCycle Version ES1.

I am trying to edit a form created with LiveCycle version 8.08.2073 (installed with Adobe Pro 8). I am using LiveCycle version ES (installed with Adobe Pro 9). I can open the fhe form, but the tools are greyed out. It apears the file is locked for editing, but I cannot determine where/how to unlock it.

You should try to start in safe mode which runs a file check. You hold the shift key down during a start up till there is a progress bar towards thr bottom of the screen. This start will take a longer time than normal. In safe mode try the functioins you are having problems with to see if there is an improvement. Some links below to read.
http://support.apple.com/kb/ht1564
http://support.apple.com/kb/ht1455

Unable to open sequence diagram created by earlier version of JDeveloper

Similar Messages

Maybe you are looking for