Unable to open service BOE120 TOMCAT and Unable to STOP severs in CCM

Hi Everyone,
i have installed business object Edge series 3.0 in windows 2008 server standard edition. I also installed crystal 2008, xcelsius engage 2008 , live office, SAP GUI 7.10. I did not installed SAP Integration yet. The installation has done in 'D-drive' instead of 'C-drive'. The installation has been done successfully for above products.
Now i am facing two problems.
In CCM, both TOMCAT and SIA are in running state.
1. when i try to open tomcat configuration, i am getting an error as below
' Unable to open service BOE120 TOMCAT'
2. In CCM, when try to stop the TOMCAT or SIA, system showing an error
'Unable to stop the service, Access Denied'.
But when i go to windows services, there i can able to stop tomcat.
What could be the reasons for above error? Wait for your reply.
Thank you all in advance

Hi,
when you want to stop the services via ccm are you logged in as a user with local administrator rights ?
Regards
-Seb.

Similar Messages

Debug web service by tomcat and intellij idea

Any idea how to debug web services using idea.I have read
http://www.wso2.net/tutorials/axis2/java/2006/07/28/debug-ws
and it didn't worked for me.
thanks

+1. From the View menu choose Application Server Navigation+
Right click the Application Server node and choose New Application Server and then follow the instructions to create a Tomcat connection.
+2. Create an EAR or WAR deployment profile depending on what is in your application - and then you can right click the project and choose Deploy to...->Tomcat connection you defined.+
I followed these steps but that only created a .war file with only one directory inside it "WEB-INF" with two files "faces-config.xml" and "web.xml".
The ant target (from my build.xml file that was delivered with the code) was not used at all and I can see no way of connecting it with the deploy profile.
If I use the target (in the build.xml file) to build my application I do get a .war file I can use. (When putting that in the tomcat webapps directory it is used by tomcat and an application directory is created by tomcat. I can then logg into it (http://localhost:8080/myapplication).
Note however, that that .war file is used in a tomcat that has been started with:
NET START Tomcat6
Not as recommended in http://technology.amis.nl/blog/1984/java-platform-debugger-architecture-jpda-with-tomcat-oc4j-eclipse-intellij-idea-and-jdeveloper
That is with:
SET JPDA_ADDRESS=8000
SET JPDA_TRANSPORT=dt_socket
catalina.bat jpda start
So the question is, how can I use the defined ant target in my build.xml file PLUS the new tomcat server connection TOGETHER so I get something that will hopefully run.

Multiple tabs open when I click on a file to open, like a PDF file. It open tab after tab and will not stop, any ideas?

when I click on a PDF file in an email or other formats that open the browser it opens up tab after tab, after tab and does not stop till I close the browner down.

It isnt a certain file type, it is all files Including word docs, excel spreadsheets, pdf's ect.. I remember Firefox asking me if I wanted to make this my default action when I clicked on a link, and I choose to make it such. I would like to change it back so I can choose whether I open/view the file or save it to my drive.

When I click on the Firefox icon, my homepage opens to about 95% and then it stops reponding. If I click on anything, I get the message that it is "not responding:. I have used Firefox for years with no problems. What can I do?

I have used Firefox for years and it has been great until a few days ago. Now when I try to open it, the homepage from a few days ago opens, but the green bar on the lower right fills in about 95%. On the lower left it says "transferring data from l1.yimg.com but it freezes there. If I click on anything, it says (not responding) on the upper left. I have uninstalled Firefox twice and redownloaded it and the exact same thing happens. Please help me. Thank you, Dave Schumer

See these articles for possible solutions:
*[[Firefox is already running but is not responding]]
*http://kb.mozillazine.org/Profile_in_use

It's something to do with pressing an indexing button in error. Now my Dad's Mac book keeps opening random email pages and can't stop.

My Dad is 92 and doesn't see very well. He was writing on his Mac book and a button came up on his desktop that asked him to open files - and he said yes, not really understanding. When I went to check, I thought at first that the Mac was attempting to index dad's computer, but in reality, all that was happening was emails were all being opened randomly and stacking on the desktop. You could not stop it except to force quit. I restarted the computer and the whole process occurred again. What's going on?

See if there's any help in this:
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

Installed Win 7 64 Service Pack 1 and ThinkVan update stops working

I have a T510 i7, Win 7 Prof. 64, bit and this morning I installed Service Pack 1 from Window Update, and now when I use ThinkVantage to check for Lenovo updates, I press Next....and then at 9% I get the message
...........an error occured whilst gathering user information"
Can anyone give any help please

you need to install the new version of sys update http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73695
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

After v29 update, the tabs i left opened constantly move left and right, none stop.

When ever I open the firefox, all the tabs i got on the top constantly moving from left to right, none stop. It only stop moving when any page loads or reloads.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

How to use JMS with tomcat and Axis

Hello
I'm new in ii, so i'm still a little bit lost. I have been implementing web services with tomcat and Axis. However, these services are synchronous and I would like that some services were asynchronous.
I've been reading about the topic and I've found that JMS is a good solution for it. I have already downloaded JMS in my computer but now I don't know what else to do. I've been trying to run the SimpleQueueSender.java example but I get the error:
JNDI API lookup failed: javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
But I have attached all .jar from F:\Sun\MessageQueue\lib
In addition to this, for my first webservices I used the Java2WSDL, WSDL2Java and AdminClient (axis tool) to create my web services bindings, stubs and skeletons and to deploy the web service on the server. Do I have to use them now with JMS? or now the deployment must be performed in a different way?
Thank you in advanced,

The error means that you have to specify the type and location of your jndi store. You could create a jndi.properties file and put two properties in it:
java.naming.provider.url=file\\\:////var/jndi
java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory
for a file based jndi store. Then you have to make sure your jndi.properties file is in your CLASSPATH. Then you have to use something like imqadmin to create your jndi store and store in it your administrative objects like Queues and QueueConnectionFactories.

Unable to open PWA in browser and MSP on application server in project server 2007. ERROR: Sending the Soap message failed or no recognizable response was received.

Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeep

Hi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep

I am unable to open the microsoft word and excel and pdf files after upgratding to 4.3.3 os version

I am unable to open the microsoft word and excel and pdf files after upgratding to 4.3.3 os version. I was able to access them in 4.3.1 .
Can anybody tell when is this getting resolved.

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

When I converted a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How can I solve this problem?

When I tried to convert a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How do I solve this problem? I don't know how to change it from Read Only.

Dear Sara
Thank you very much for sending the converted file. Yes, I am able to edit it - that will be very useful to me and I appreciate your help.
Referring to your previous message when you said you'd converted via Acrobat and not Acrobat.com, I'm converting via Acrobat.com because that's the only option that is shown (how do I convert via Acrobat? - perhaps that would be more successful). I'm using the Export PDF website, and the OCR is enabled to "Recognize text in English UK". However, I've just tried converting a different LPA pdf form, this time for Health & Welfare https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/245571/LPA114_He alth_welfare_LPA.pdf and again I have the same problem as before. I've altered it from "Read only" and thought I'd then be able to enter text, but "Drawing Tools" is shown in the pane and I'm unable to enter anything onto the form - everything appears to be in images. Also, the lettering on the heading of' page 1 has become jumbled, with the word "Public" overlaying the word "Guardian." Any suggestions as to what it is I'm doing wrong would be welcome - I don't like to be beaten!
Regards,
Judith.

I'm opening up my Mac and it is going straight to Word for Mac and randomly opening multiple pages automatically. I am unable to control it. I think there is a problem. I'm desperate to get into my work - any ideas?

I'm opening up my Mac and it is going straight to Word for Mac and randomly opening multiple pages automatically. I am unable to control it. I think there is a problem. I'm desperate to get into my work - any ideas?

If you close all the windows and quit word, next time you restart, DO NOT check "Reopen windows on login".
Also, check your login items for your user account.

Unable to open System Preferences - Keyboard and Mouse

Hi, My MacBook Pro don't open System Preferences -> Keyboard and Mouse Panel.
I tested reinstall the system, it's working, but after update to 10.5.2 the problem returned.
The following messages are displayed on the console when i click on "Keyboard and Mouse" icon.
/Applications/System\ Preferences.app/Contents/MacOS/System\ Preferences
2008-02-21 14:11:38.442 System Preferences[272:10b] * -[NSCFArray objectAtIndex:]: index (2147483647( or possibly larger)) beyond bounds (3)
---

I'm having basically the same problem, though with a different console message:
5/2/08 15.04.49 System Preferences[55360] * -[NSURL initFileURLWithPath:]: nil string parameter
Anyone else see this?

HT201303 Has anyone experienced being a victim of GNU Emacs Api Emulations hacking thru URL's - Feeds - Email - Redirect - Data Scrabling and more? We are unable to stop them because they are super users. They come back and do more damage. Help Please.

We have been compromised within our businesses from an empolyee that was terminated with GNU Emac Api enulation program that has infiltrated all of our brand new Apple Computers. We made a decision to move to Mac's this year because of all our businesses being internet based and we are in several different platforms that require many different passcodes, email address, bank accounts, etc. It is not one seamless system that would address one email, password, bank account, etc.
Eacy time we change one segment of our business unit to move to the next one to fix, we go back to check the previous one that we changed and they have already been in the accounts and changed them so that we have to redo them.
The information is so broad and wide that the only way I know to ask this first questions - has anyone had this happen to them? We have seeked many avenues with law, experts, reformating our 2 momth old systems 2-3 times each and start over. They are the super users of this program and we can not get them out by changing passwords, accounts, etc. They have everything we do and make sure they keep changing it as we work on the next segment. They have cost our small business thousands of dollars already.
I am a victim of something that even the local forenic authority is stumped because they don't know where to start. We are not a banking instutition or 100 million dollar company to get the help we need. We don't want to find hackers like they have done to us, we want to get them stopped and get us back on track to start getting our businesses rebuilt.
Lots of stuff, but WE ARE BEGGING for HELP.
Apple Support today spent 3 hours with us on the phone and our suppot representative was awesome, but they also said it was big and we need to reach out to the Apple community to see if they heard of anything like this crime. They are in the URL's, RSS Feeds and ghosting everything we do.
I was told by our local Mac support that this was done by someone that was highly sophicated and they did not know many people that could do this type of damage. I can't image that someone in the Apple community would not know of someone that can assist. The one security company we contacted was around $25,000 to fix this aweful crime.
We just want them stopped and put in jail so we can go back to business before it destoys us completely. They even installed emacs on all of our Iphone and androids. WE are being taped, video recorded and eery key stroke is recored. They are only taking us down in middle America.
Anyone have any ideas? Thank you.

Hi AP_In_Surbiton,
I am really sorry that you have had so much trouble getting your Caller ID up and going. I'll be happy to help you out with this and get it working for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Services to start and stop Tomcat

I have Tomcat 4.1.27 on a Windows 2000 Server where the startup.bat doesnt work and I have to startup the container using the Windows Services tool. The server also doesnt show any Tomcat console window so I can see what is happening.
The startup.bat just pulls up a window real quick and it disappears and the container never starts up. The shutdown.bat does shut down the container but I use the Server Services to shutdown the container when needed.
Please advise if this is normal and anyway to change it to how I have it in my local develper environment. In my local developer env, I use startup.bat and shutdown.bat and see Tomcat console window after it is started up and the console window stays up so I can view it.

Hi,
I have the same env. I faced the same problem. Go to cmd prompt and go to tomcat bin directory, before that set the JAVA_HOME in the windows Env properties or open Catlina.bat file and set the JAVA_HOME. After setting the JAVA_HOME setup, give the command as like this "catalina run" in the command prompt, the command prompt window will not be disappered. If you give "Catlina start" a new tomcat startup window will be opened. If any error occurs on startup the window gets disappered.
Let me know you need some more help.
Cheers!!!
Sundaram.

Unable to open service BOE120 TOMCAT and Unable to STOP severs in CCM

Similar Messages

Maybe you are looking for