Unable to open software

I have downloaded software on to my computer but I am unable to open software so that I can configure system.
I am using Windows Vista Home.
I no Airport Express works using Windows Vista Home as we got it working from a laptop .
The problem seems to be with my machine
Peter

the files go to the desktop where I try to open them. If the Mac OS can't open them I move them to the trash and empty the trash.
When I try to open the file I get a small window saying file was not readable and maybe it was damaged. In some cases I get a list of other applications to try to open the file but the only download app on these iMacs is the Mac software install utility which is the one that can't determine what it is supposed to work with.
I have the same problem with Firefox on 2 different Macs using different versions of Mac OS X.
There are no screen shots available of this.

Similar Messages

I updated the software on my 2009 MBP to Mountain Lion. Since then, my iPhoto has been unable to open my photo library. I have updated iPhoto, and still no luck. Any ideas for fixing this problem?

I updated the software on my 2009 MBP to Mountain Lion. Since then, my iPhoto has been unable to open my photo library. I have updated iPhoto, and still no luck. Any ideas for fixing this problem?

Welcome to the Apple Support Communities
Do you see any message when you open iPhoto? Try to open iPhoto holding Option key and select the library

Since installing OS X Mavericks I am unable to open Adobe CS5 software such as Photoshop CS5 etc

Since installing OS X Mavericks I am unable to open Adobe CS5 software such as Photoshop CS5 etc

Check out the Adobe / Mavericks support page > OS Compatibility and FAQs for Mac OS Mavericks (v10.9)

When I open an encryted pdf file in my Hp Slate 7 voice Tab it was unable to open the pdf file.Tje same file was opening with other pdf reader software.Kindly Help.

When I open an encryted pdf file in my Hp Slate 7 voice Tab it was unable to open the pdf file.Tje same file was opening with other pdf reader software.Kindly Help.
[spam link removed]

Could you please send the pdf to [email protected] so that we may investigate the issue?
Thanks,
Adobe Reader Team

Unable to open files made in iWork '08 without installing original software

After re-installing my original Mac OSX to try to cure another issue, I find I'm unable to open my Numbers '08 files unless I re-install the original software.
The following message appears: Files that iWork needs are missing. To restore the missing files, use the iWork Installer to re-install iWork.
I can't remember whether I actually bought the disks, or whether I downloaded the software on line, as I'm unable to find any trace of software in the house.
Is the iWork '08 software still available, and if so, where can I download it from?

As far as I know, the answer is No. I have also found it safer to re-build all my MS1 concerts in MS2 rather than importing them from MS1.
It doesn't cost too much to upgrade from MS1 to MS2.

After updated to OS X Yosemite, unable to open my Photon 3G software

Hi
After updated to OS X Yosemite, unable to open my Photon 3G software which was working previously properly.
Please help me out

Go to the system preference and click on network.
In network it will show you the dongle option like in my case my dongle name is ZTEUSBModem.
And enter the phone number "*99#". Click on connect.
http://apple.stackexchange.com/questions/153136/tata-photon-3g-dongle-crashes-af ter-upgrading-my-os-to-yosemite

N95 software update - "unable to open database"

Hi all,
Ive just done the update to V 20.0.016 and it seemed to work ok. I can add contacts, add calendar but it wont sync with my PC.
it gives "unable to open database" on the phone.
have tried removing the battery for 5 mins, the hard reset (though holding four buttons down was hard), restore to factory settings and reinastalled the update to no avail.
any clues would be appreciated.
Adie

I had the same error message after updating my firmware. However, I had my config set to "delete all" data on phone before copying data from phone to PC. When I removed this setting and actually put something in the phone database all has worked fine.

Unable to open Apple application

Last week, I did the most current software updates. Ever since then, I have been unable to open certain Apple programs such as iChat, Skype, Preview, Pages, Photo Booth, etc. I have tried to download AIM, but the computer says it isn't supported. Also, now when I try to open Photo Booth, it says my graphics card doesn't support it, but I have never changed the card from the one the computer came with. The programs will open up, and then immediately quit, and I am left with "The application _____ quit unexpectedly" message. No matter how many times I relaunch and reset, ignore, or report, I can't get them to open. I'm in college and really have no way to get to a Genius Bar for a few more weeks, and I don't have the Leopard disk with me. Is there any way I can fix this on my own? Thanks!

I think it was the repair disk permission that actually worked for me. I tried it once and got no result, and then tried to download the updater. For whatever reason, I couldn't even download that. So I went back and did the disk permission repair again. It still didn't seem to work, so I just turned the computer off out of frustration. When I turned it back on, it was all fixed. So I'm not entirely sure what it was that fixed it...all I know is it works now!

ERROR: Unable to open TUXCONFIG file

Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PM

Hi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM

Unable to open .eps file "unknown format and cannot be opened" ?

A client sent me an .eps file (logo). I tried opening it in Illustrator AND photoshop (just to see if it was saved in one vs the other program) - however to no avail.
Illustrator gives me a message "unknown format and cannot be opened"
Photoshop gives me a message "photoshop was unable to parse the postscript".
I'm using Adobe CS4, and I've never seen this message before—would love to know what this means and how to resolve?
File attached if anyone is able to open / fix it?
Thanks kindly,
Chemol

Thanks for the advice Scott - does compression improve the .eps? Is it
silly for me to ask them to compress it since the file is only 766 KB
(that's how big the attachment is in my email - though I am unable to open
it)?
My friend is able to open it on his end - however the 3rd person (client) is
the one who sent it, and I have already requested a different version - no
response from them yet. Unfortunately what the company "has" is what he
will likely give to me again (ie: same file / unable to open). So ... I am
curious about how I can resolve this issue on my end - if possible?
Do you know what the AI and Photoshop error messages mean? Could the issue
be a mac vs PC concern? Or is it a corrupt file? Could it be a software
version issue (old vs new) ... or Quark incompatibility?
.... just guessing at this point....Any insight as to what different
scenarios may apply in this situation would be greatly appreciated ..thank
you.

I restarted my Firefox this morning and it automatically updated to version 9.0.1. Since that update, I am unable to open Firefox - it is giving no response.

I restarted my Firefox this morning and it automatically updated to version 9.0.1. Since that update, I am unable to open Firefox. When I try to open it (and this is on a Mac), it does not respond and freezes with a white screen, the tab says "connecting...," and there are no bookmarks or anything showing on the browser. It does not respond at all - I cannot even click into the navigation to change any of the preferences. Please, someone help! Not having Firefox is killing me!

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

[SOLVED] Rad 7790+Catalyst = Error: unable to open display (null)

Radeon HD 7790 + Catalyst = Error: unable to open display (null)
Greetings,
I've installed Arch 2 days ago(migrated from Fedora), but I'm still a newbie to linux, so please have patience.
I've bought AMD Radeon HD 7790 recently and decided that it's time to upgrade system, but since then I had only problems with it. No LiveCD I tried (Fedora 20, Mint) worked properly in graphics mode, so I suspected problem in built-in drivers and moved to linux with text-only installation (Arch), so I could install drivers later.
I've followed wiki manual and installed catalyst, removed open source driver, added nomodeset parametr to GRUB etc. but I'm still stucked, because Xorg won't start(black screen and errors presented in Logs). Tried googling, but learned nothing except Radeon proprietary drivers are comparable to suicide.
Versions:
Kernel: 3-10.40-1-lts (catalyst_build_module sucessful)
Catalyst: 14.4-10
Xorg: 1.14.5-11
Logs&Configs:
lsmod
fglrx 8672295 0
amd_iommu_v2 7174 1 fglrx
button 4765 1 fglrx
fglrxinfo
Error: unable to open display (null)
Xorg.0.conf
[ 2632.576]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 2632.594] X Protocol Version 11, Revision 0
[ 2632.600] Build Operating System: Linux 3.12.6-1-ARCH x86_64
[ 2632.606] Current Operating System: Linux localhost 3.10.40-1-lts #1 SMP Tue May 13 12:50:03 UTC 2014 x86_64
[ 2632.606] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4f60e723-44e9-4264-8d6c-ca62c43cf69c rw quiet nomodeset
[ 2632.619] Build Date: 08 January 2014 01:35:51PM
[ 2632.629]
[ 2632.635] Current version of pixman: 0.32.4
[ 2632.646] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2632.646] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2632.671] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 25 00:53:45 2014
[ 2632.677] (==) Using config file: "/etc/X11/xorg.conf"
[ 2632.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2632.690] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2632.690] (==) ServerLayout "aticonfig Layout"
[ 2632.690] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2632.690] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2632.690] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2632.690] (==) Automatically adding devices
[ 2632.690] (==) Automatically enabling devices
[ 2632.690] (==) Automatically adding GPU devices
[ 2632.690] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2632.690] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2632.690] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2632.690] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2632.690] (II) Loader magic: 0x7fac20
[ 2632.690] (II) Module ABI versions:
[ 2632.690] X.Org ANSI C Emulation: 0.4
[ 2632.690] X.Org Video Driver: 14.1
[ 2632.690] X.Org XInput driver : 19.1
[ 2632.691] X.Org Server Extension : 7.0
[ 2632.692] (--) PCI:*(0:2:0:0) 1002:665c:1458:226a rev 0, Mem @ 0xc0000000/268435456, 0xde800000/8388608, 0xdffc0000/262144, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
[ 2632.698] Initializing built-in extension Generic Event Extension
[ 2632.704] Initializing built-in extension SHAPE
[ 2632.710] Initializing built-in extension MIT-SHM
[ 2632.717] Initializing built-in extension XInputExtension
[ 2632.723] Initializing built-in extension XTEST
[ 2632.728] Initializing built-in extension BIG-REQUESTS
[ 2632.734] Initializing built-in extension SYNC
[ 2632.740] Initializing built-in extension XKEYBOARD
[ 2632.745] Initializing built-in extension XC-MISC
[ 2632.751] Initializing built-in extension SECURITY
[ 2632.756] Initializing built-in extension XINERAMA
[ 2632.761] Initializing built-in extension XFIXES
[ 2632.767] Initializing built-in extension RENDER
[ 2632.772] Initializing built-in extension RANDR
[ 2632.777] Initializing built-in extension COMPOSITE
[ 2632.782] Initializing built-in extension DAMAGE
[ 2632.787] Initializing built-in extension MIT-SCREEN-SAVER
[ 2632.792] Initializing built-in extension DOUBLE-BUFFER
[ 2632.797] Initializing built-in extension RECORD
[ 2632.802] Initializing built-in extension DPMS
[ 2632.806] Initializing built-in extension X-Resource
[ 2632.811] Initializing built-in extension XVideo
[ 2632.816] Initializing built-in extension XVideo-MotionCompensation
[ 2632.821] Initializing built-in extension XFree86-VidModeExtension
[ 2632.825] Initializing built-in extension XFree86-DGA
[ 2632.830] Initializing built-in extension XFree86-DRI
[ 2632.834] Initializing built-in extension DRI2
[ 2632.834] (II) "glx" will be loaded by default.
[ 2632.834] (II) LoadModule: "glx"
[ 2632.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2632.835] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2632.835] compiled for 6.9.0, module version = 1.0.0
[ 2632.839] Loading extension GLX
[ 2632.839] (II) LoadModule: "fglrx"
[ 2632.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2632.863] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] Module class: X.Org Video Driver
[ 2632.863] (II) Loading sub module "fglrxdrm"
[ 2632.863] (II) LoadModule: "fglrxdrm"
[ 2632.863] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.863] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 2632.864] (II) AMD Proprietary Linux Driver Release Identifier: 14.10.1006
[ 2632.864] (II) AMD Proprietary Linux Driver Build Date: Apr 17 2014 21:15:33
[ 2632.864] (--) using VT number 2
[ 2632.885] (WW) Falling back to old probe method for fglrx
[ 2632.899] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.901] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.901] ukiOpenDevice: open result is 11, (OK)
[ 2632.901] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2632.901] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.904] (--) Chipset Supported AMD Graphics Processor (0x665C) found
[ 2632.904] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 2632.905] (II) fglrx(0): pEnt->device->identifier=0x11bea10
[ 2632.905] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 2632.905] (II) Loading sub module "vgahw"
[ 2632.905] (II) LoadModule: "vgahw"
[ 2632.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2632.905] (II) Module vgahw: vendor="X.Org Foundation"
[ 2632.906] compiled for 1.14.5, module version = 0.1.0
[ 2632.906] ABI class: X.Org Video Driver, version 14.1
[ 2632.906] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2632.906] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2632.906] (==) fglrx(0): Default visual is TrueColor
[ 2632.906] (**) fglrx(0): Option "DPMS" "true"
[ 2632.906] (==) fglrx(0): RGB weight 888
[ 2632.906] (II) fglrx(0): Using 8 bits per RGB
[ 2632.906] (==) fglrx(0): Buffer Tiling is ON
[ 2632.906] (II) Loading sub module "fglrxdrm"
[ 2632.906] (II) LoadModule: "fglrxdrm"
[ 2632.906] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.906] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.906] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.908] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.908] ukiOpenDevice: open result is 13, (OK)
[ 2632.908] ukiOpenByBusid: ukiOpenMinor returns 13
[ 2632.908] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.908] (**) fglrx(0): NoAccel = NO
[ 2632.909] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2632.909] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x665c)
[ 2632.909] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x226a)
[ 2632.909] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2632.909] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 2632.909] (--) fglrx(0): MMIO registers at 0xdffc0000
[ 2632.909] (--) fglrx(0): I/O port at 0x0000e800
[ 2632.909] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2632.909] (II) fglrx(0): AC Adapter is used
[ 2632.914] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 2632.914] (II) Loading sub module "vbe"
[ 2632.914] (II) LoadModule: "vbe"
[ 2632.915] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2632.915] (II) Module vbe: vendor="X.Org Foundation"
[ 2632.915] compiled for 1.14.5, module version = 1.1.0
[ 2632.915] ABI class: X.Org Video Driver, version 14.1
[ 2632.915] (II) fglrx(0): VESA BIOS detected
[ 2632.915] (II) fglrx(0): VESA VBE Version 3.0
[ 2632.915] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 2632.915] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 2632.915] (II) fglrx(0): VESA VBE OEM Software Rev: 15.32
[ 2632.915] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product: BONAIRE
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 2632.915] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2632.915] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 2632.915] (II) fglrx(0): PCIE card detected
[ 2632.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2632.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2632.915] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 2632.915] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2632.915] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2632.915] (II) Loading sub module "fb"
[ 2632.915] (II) LoadModule: "fb"
[ 2632.916] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2632.916] (II) Module fb: vendor="X.Org Foundation"
[ 2632.916] compiled for 1.14.5, module version = 1.0.0
[ 2632.916] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2632.916] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 2632.916] (II) Loading sub module "ddc"
[ 2632.916] (II) LoadModule: "ddc"
[ 2632.916] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 2633.034] (II) fglrx(0): Output DFP2 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP3 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP4 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP5 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP6 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP7 has no monitor section
[ 2633.034] (II) fglrx(0): Output CRT1 has no monitor section
[ 2633.034] (II) Loading sub module "ddc"
[ 2633.034] (II) LoadModule: "ddc"
[ 2633.034] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Connected Display0: CRT1
[ 2633.034] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2633.034] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.034] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.034] (II) fglrx(0): EDID Version: 1.3
[ 2633.034] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.034] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.034] (II) fglrx(0): Gamma: 2.20
[ 2633.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.034] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.034] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.034] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.034] (II) fglrx(0): Supported established timings:
[ 2633.034] (II) fglrx(0): 720x400@70Hz
[ 2633.034] (II) fglrx(0): 640x480@60Hz
[ 2633.034] (II) fglrx(0): 640x480@67Hz
[ 2633.034] (II) fglrx(0): 640x480@72Hz
[ 2633.034] (II) fglrx(0): 640x480@75Hz
[ 2633.034] (II) fglrx(0): 800x600@56Hz
[ 2633.034] (II) fglrx(0): 800x600@60Hz
[ 2633.034] (II) fglrx(0): 800x600@72Hz
[ 2633.034] (II) fglrx(0): 800x600@75Hz
[ 2633.034] (II) fglrx(0): 832x624@75Hz
[ 2633.034] (II) fglrx(0): 1024x768@60Hz
[ 2633.034] (II) fglrx(0): 1024x768@70Hz
[ 2633.034] (II) fglrx(0): 1024x768@75Hz
[ 2633.035] (II) fglrx(0): 1280x1024@75Hz
[ 2633.035] (II) fglrx(0): 1152x864@75Hz
[ 2633.035] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.035] (II) fglrx(0): Supported standard timings:
[ 2633.035] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.035] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.035] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.035] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.035] (II) fglrx(0): Supported detailed timing:
[ 2633.035] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.035] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.035] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.035] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.035] (II) fglrx(0): Monitor name: L1918S
[ 2633.035] (II) fglrx(0): Monitor name:
[ 2633.035] (II) fglrx(0): EDID (in hex):
[ 2633.035] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.035] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.035] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.035] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.035] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.035] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.035] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.035] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.035] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2633.035] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 2633.036] (II) fglrx(0): EDID for output DFP1
[ 2633.036] (II) fglrx(0): EDID for output DFP2
[ 2633.036] (II) fglrx(0): EDID for output DFP3
[ 2633.036] (II) fglrx(0): EDID for output DFP4
[ 2633.036] (II) fglrx(0): EDID for output DFP5
[ 2633.036] (II) fglrx(0): EDID for output DFP6
[ 2633.036] (II) fglrx(0): EDID for output DFP7
[ 2633.036] (II) fglrx(0): EDID for output CRT1
[ 2633.036] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.036] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.036] (II) fglrx(0): EDID Version: 1.3
[ 2633.036] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.036] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.036] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.036] (II) fglrx(0): Gamma: 2.20
[ 2633.036] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.036] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.036] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.036] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.036] (II) fglrx(0): Supported established timings:
[ 2633.036] (II) fglrx(0): 720x400@70Hz
[ 2633.036] (II) fglrx(0): 640x480@60Hz
[ 2633.036] (II) fglrx(0): 640x480@67Hz
[ 2633.036] (II) fglrx(0): 640x480@72Hz
[ 2633.036] (II) fglrx(0): 640x480@75Hz
[ 2633.036] (II) fglrx(0): 800x600@56Hz
[ 2633.036] (II) fglrx(0): 800x600@60Hz
[ 2633.036] (II) fglrx(0): 800x600@72Hz
[ 2633.036] (II) fglrx(0): 800x600@75Hz
[ 2633.036] (II) fglrx(0): 832x624@75Hz
[ 2633.037] (II) fglrx(0): 1024x768@60Hz
[ 2633.037] (II) fglrx(0): 1024x768@70Hz
[ 2633.037] (II) fglrx(0): 1024x768@75Hz
[ 2633.037] (II) fglrx(0): 1280x1024@75Hz
[ 2633.037] (II) fglrx(0): 1152x864@75Hz
[ 2633.037] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.037] (II) fglrx(0): Supported standard timings:
[ 2633.037] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.037] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.037] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.037] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.037] (II) fglrx(0): Supported detailed timing:
[ 2633.037] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.037] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.037] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.037] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.037] (II) fglrx(0): Monitor name: L1918S
[ 2633.037] (II) fglrx(0): Monitor name:
[ 2633.037] (II) fglrx(0): EDID (in hex):
[ 2633.037] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.037] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.037] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.037] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.037] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.037] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.037] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.037] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.037] (II) fglrx(0): Printing probed modes for output CRT1
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2633.037] (II) fglrx(0): Output DFP1 disconnected
[ 2633.037] (II) fglrx(0): Output DFP2 disconnected
[ 2633.037] (II) fglrx(0): Output DFP3 disconnected
[ 2633.037] (II) fglrx(0): Output DFP4 disconnected
[ 2633.037] (II) fglrx(0): Output DFP5 disconnected
[ 2633.038] (II) fglrx(0): Output DFP6 disconnected
[ 2633.038] (II) fglrx(0): Output DFP7 disconnected
[ 2633.038] (II) fglrx(0): Output CRT1 connected
[ 2633.038] (II) fglrx(0): Using exact sizes for initial modes
[ 2633.038] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 2633.038] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2633.038] (II) fglrx(0): DPI set to (96, 96)
[ 2633.038] (II) fglrx(0): Eyefinity capable adapter detected.
[ 2633.038] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 2633.038] (==) fglrx(0): PseudoColor visuals disabled
[ 2633.038] (II) Loading sub module "ramdac"
[ 2633.038] (II) LoadModule: "ramdac"
[ 2633.038] (II) Module "ramdac" already built-in
[ 2633.038] (==) fglrx(0): NoDRI = NO
[ 2633.038] (==) fglrx(0): Capabilities: 0x00000000
[ 2633.038] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2633.038] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2633.038] (==) fglrx(0): UseFastTLS=0
[ 2633.038] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 2633.038] (--) Depth 24 pixmap format is 32 bpp
[ 2633.038] Loading extension ATIFGLRXDRI
[ 2633.038] (II) fglrx(0): doing swlDriScreenInit
[ 2633.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.039] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.039] ukiOpenDevice: open result is 14, (OK)
[ 2633.039] ukiOpenByBusid: ukiOpenMinor returns 14
[ 2633.039] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.039] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2633.039] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 2633.039] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x3c000
[ 2633.039] (II) fglrx(0): [uki] mapped SAREA 0x3c000 to 0x7f000fd0d000
[ 2633.039] (II) fglrx(0): [uki] framebuffer handle = 0x3d000
[ 2633.039] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2633.039] (II) fglrx(0): swlDriScreenInit done
[ 2633.039] (II) fglrx(0): Kernel Module Version Information:
[ 2633.039] (II) fglrx(0): Name: fglrx
[ 2633.039] (II) fglrx(0): Version: 14.10.2
[ 2633.039] (II) fglrx(0): Date: Apr 17 2014
[ 2633.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 2633.039] (II) fglrx(0): Kernel Module version matches driver.
[ 2633.039] (II) fglrx(0): Kernel Module Build Time Information:
[ 2633.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.40-1-lts
[ 2633.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 2633.039] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 2633.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 2633.039] (II) fglrx(0): [uki] register handle = 0x0003e000
[ 2633.040] (II) fglrx(0): DRI initialization successfull
[ 2633.040] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
[ 2633.041] (==) fglrx(0): Backing store disabled
[ 2633.041] Loading extension FGLRXEXTENSION
[ 2633.041] (**) fglrx(0): DPMS enabled
[ 2633.041] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 2633.041] (**) fglrx(0): Textured Video is enabled.
[ 2633.041] (II) LoadModule: "glesx"
[ 2633.042] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 2633.043] (II) Module glesx: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 1.0.0
[ 2633.043] Loading extension GLESX
[ 2633.043] (II) fglrx(0): GLESX enableFlags = 8784
[ 2633.043] (II) fglrx(0): GLESX is enabled
[ 2633.043] (II) LoadModule: "amdxmm"
[ 2633.043] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 2633.043] (II) Module amdxmm: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 2.0.0
[ 2633.055] Loading extension AMDXVOPL
[ 2633.055] Loading extension AMDXVBA
[ 2633.055] (II) fglrx(0): Enable composite support successfully
[ 2633.055] (WW) fglrx(0): Option "VendorName" is not used
[ 2633.055] (WW) fglrx(0): Option "ModelName" is not used
[ 2633.055] (II) fglrx(0): X context handle = 0x1
[ 2633.055] (II) fglrx(0): [DRI] installation complete
[ 2633.055] (==) fglrx(0): Silken mouse enabled
[ 2633.056] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 2633.056] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2633.414] (--) RandR disabled
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.432] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.432] ukiOpenDevice: open result is 15, (OK)
[ 2633.432] ukiOpenByBusid: ukiOpenMinor returns 15
[ 2633.432] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.432] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.443] ukiOpenDevice: open result is 16, (OK)
[ 2633.443] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiDynamicMajor: found major device number 250
[ 2633.446] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.446] ukiOpenDevice: open result is 16, (OK)
[ 2633.446] ukiOpenByBusid: ukiOpenMinor returns 16
[ 2633.446] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.525] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.526] ukiOpenDevice: open result is 17, (OK)
[ 2633.526] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiDynamicMajor: found major device number 250
[ 2633.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.527] ukiOpenDevice: open result is 17, (OK)
[ 2633.527] ukiOpenByBusid: ukiOpenMinor returns 17
[ 2633.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.546] (II) fglrx(0): OverDrive6 Detected!
[ 2633.551] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 2633.594] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2633.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.594] (II) LoadModule: "evdev"
[ 2633.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2633.595] (II) Module evdev: vendor="X.Org Foundation"
[ 2633.595] compiled for 1.14.3, module version = 2.8.2
[ 2633.595] Module class: X.Org XInput Driver
[ 2633.595] ABI class: X.Org XInput driver, version 19.1
[ 2633.595] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.595] (**) Power Button: always reports core events
[ 2633.595] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2633.595] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.595] (--) evdev: Power Button: Found keys
[ 2633.595] (II) evdev: Power Button: Configuring as keyboard
[ 2633.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2633.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2633.595] (**) Option "xkb_rules" "evdev"
[ 2633.595] (**) Option "xkb_model" "pc104"
[ 2633.595] (**) Option "xkb_layout" "us"
[ 2633.634] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2633.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.634] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.634] (**) Power Button: always reports core events
[ 2633.634] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2633.634] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.634] (--) evdev: Power Button: Found keys
[ 2633.634] (II) evdev: Power Button: Configuring as keyboard
[ 2633.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 2633.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2633.634] (**) Option "xkb_rules" "evdev"
[ 2633.634] (**) Option "xkb_model" "pc104"
[ 2633.634] (**) Option "xkb_layout" "us"
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2633.635] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2633.635] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
[ 2633.635] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 2633.635] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event6)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event10)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event11)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event13)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event9)
[ 2633.639] (II) No input driver specified, ignoring this device.
[ 2633.639] (II) This device may have been added with another device file.
[ 2633.639] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2633.639] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2633.639] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2633.639] (**) AT Translated Set 2 keyboard: always reports core events
[ 2633.639] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2633.639] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2633.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2633.639] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2633.639] (**) Option "xkb_rules" "evdev"
[ 2633.639] (**) Option "xkb_model" "pc104"
[ 2633.639] (**) Option "xkb_layout" "us"
[ 2633.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2633.640] (II) No input driver specified, ignoring this device.
[ 2633.640] (II) This device may have been added with another device file.
[ 2635.885] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 2639.300] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2639.300] (II) fglrx(0): Backup framebuffer data.
[ 2639.333] (II) fglrx(0): Backup complete.
[ 2653.729] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.732] (II) fglrx(0): Shutdown CMMQS
[ 2653.735] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 2653.735] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x3c000 at 0x7f000fd0d000
[ 2653.735] (EE)
[ 2653.740] (EE) Backtrace:
[ 2653.745] (EE) 0: Xorg (xorg_backtrace+0x3d) [0x57e04d]
[ 2653.750] (EE) 1: Xorg (0x400000+0x181da9) [0x581da9]
[ 2653.754] (EE) 2: /usr/lib/libpthread.so.0 (0x7f000f1e8000+0xf4b0) [0x7f000f1f74b0]
[ 2653.759] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f000f406000+0x503e) [0x7f000f40b03e]
[ 2653.765] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f000bb46126]
[ 2653.771] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x9e2e05) [0x7f000bb3ee05]
[ 2653.776] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f000bb32555]
[ 2653.782] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f000bb47286]
[ 2653.788] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f000b56897d]
[ 2653.793] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f000ab0163d]
[ 2653.799] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x441623) [0x7f000b59d623]
[ 2653.805] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f000b59d474]
[ 2653.811] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x73e) [0x7f000b6ffc1e]
[ 2653.817] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f000b6ff241]
[ 2653.823] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0xa4a846) [0x7f000bba6846]
[ 2653.828] (EE) 15: Xorg (0x400000+0xc3136) [0x4c3136]
[ 2653.833] (EE) 16: Xorg (0x400000+0x106964) [0x506964]
[ 2653.838] (EE) 17: Xorg (0x400000+0x24cd7) [0x424cd7]
[ 2653.843] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f000e058000]
[ 2653.848] (EE) 19: Xorg (0x400000+0x24f0f) [0x424f0f]
[ 2653.857] (EE)
[ 2653.861] (EE) Segmentation fault at address 0x0
[ 2653.866] (EE)
Fatal server error:
[ 2653.874] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 2653.878] (EE)
[ 2653.883] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2653.899] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2653.904] (EE)
[ 2653.908] (EE) Server terminated with error (1). Closing log file.
xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I'm sure that the main problem is between keyboard and chair, but I'd like to know, what's wrong with pc
Thanks for your efforts.
Last edited by Mytrin (2014-05-25 19:09:02)

I've managed to solve this error:
(EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory
There was missing library and few directories, which I found according to this http://www.reddit.com/r/archlinux/comme … _correctly at /usr/lib/dri, so I had to just symlink it. However, "unable to open display" error is still annoying me and Xorg is not working.
EDIT: Found EE about missing commands in new Xorg.0.log and installed xterm to solve this. Now I don't have entirely black screen after startx. There is white rectangular terminal and fglrxinfo seems to be all right as it detected my Radeon and OpenGL. Now I have to install some DE, but that's another story. Marking as [SOLVED] and once again thanks to clfarron4 for reply.
Last edited by Mytrin (2014-05-25 19:06:09)

Problem with Pages. I have recently been unable to open Pages, or any documents from Pages on my iMac. Pages seems to be in the Cloud and can open a list of the documents in Pages, but can't open any of those documents.

Recently unable to open Pages or any documents therein. It seems to be stuck in the Cloud. Although I can open a list of the documents I can not open any of the documents.

The answer is simple... If you want to remedy this, then don't save them as PDFs.
Word opens Word and text documents. Not PDFs.
Also note that this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office or your question in any way. If you have issues or questions about Office, it's probably best you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Unable to open Messaging Server 6.2 through admin console 5.2

my system is
Sun Java(tm) System Messaging Server 6.2-3.05 (built Nov 23 2005)
libimta.dll 6.2-3.05 (built 02:22:19, Nov 23 2005)
Microsoft Windows 2000 version 5.2 (Build 3790)
i installed Sun Java Enterprise System (directory, admin, messaging) servers on my windows 2003 server, all is working fine except:
1- unable to open my messaging server through my admin console 5.2.
when checking the error log file i see
"[05/Jun/2006:10:51:49] failure ( 2624): for host t.est.hotmail.com trying to GET /msg-config/tasks/operation/cgi_root, cgi_scan_headers reports: the CGI program E:\Sun\Server-Root\bin\msg\admin\bin\cgi_root.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)"
Any clue?
2- When creating a new user through the admin console 5.2, and check the mail account checkbox, i don't get the "mail tab" to complete the needed information, and therefore the newly created user is not an active email account as mainly the mailhost attribute has not been created for the account
Is this related to the problem in point 1?
NOTE 1: i ran cmm_dssetup.pl before configuring the messaging server and selected schema 1
NOTE 2: i downloaded the software from sun.com, didn't register it yet as i'm in the testing phase
Appreciate your help, direction and tips

Oh, my.....
1. The Directory Console is not very useful, for anything in Messaging 6. The MTA is configured via editing files, and the mail store is better configured using the configutil utility.
2. You SHOULD NOT attempt to create users with the Directory Console. They won't work. Use either the command-line tools provided (comm-admin), or use the Delegated Admin tool provided.

E70 PDF Reader : Unable to open. File type not sup...

This morning I have bought an E70, among others due to its highscreen resolution and the possibility to run a PDF reader on it.
I have now tried ...
  - the pre-installed Adobe PDF Reader
  - the Adobe PDF Reader supplied with the PC Suite CD-ROM
  - the Adobe PDF Reader available on europe.nokia.com
I am fascinated by a software which presents itself in the About box as '1.5', prompts during installation for '1.0.5' and has filenames '1_5_0'.
Apart from minor variations in the SIS filenames they all share the same annoying feature: They refuse to display any of my PDF files but display a message 'Unable to open. File type not supported. 5. !' instead.
It doesn't seem to be a problem of the PDF files, since a collegue of mine was able to open them on his E61 or E70 (forgot to ask).
Any idea what this problem could be caused by?

I am speechless -- but happy.
The complaint about the file type only appears if you try to open a PDF stored in the phone memory but not if you try to open a PDF stored on the memory card.
Problem solved.

Unable to open software

Similar Messages

Maybe you are looking for