Unable to open TestStand 2 sequence from TestStand 3

I have a sequence file built in TestStand 2 that I am unable to open from TestStand 3. I first receive some type conflict prompts, then the following error.
Invalid adapter name: 'Labview'.
The sequence file 'filename' cannot be loaded.
Error code -17336, Invalid adapter name.
Source 'TSAPI'.
Does anyone have any ideas as to what may be causing this or how work around it?

Kevin -
The adapter name in TestStand 2.x for LabVIEW is "G Std Prototype Adapter". If you look in most TestStand 2.x files you should see lines like this:
Adapter = "G Std Prototype Adapter"
Based on your error I assume that if you look in your TS 2.x file you will see:
Adapter = "Labview"
I am not sure how the adapter name was set like this. If the text is "Labview", then you should be able to backup your current TS 2.x file, edit in NOTEPAD the value of the text in quotes for the Adapter setting.
If the text is not "Labview", can you please post the sequence file?
Note that TestStand 3.0 files no longer store this adapter setting in the same way, so you no longer see this line in TestStand 3.0 files.
Scott Richardson
Scott Richardson
National Instruments

Similar Messages

I am unable to open .epub books downloaded from Barnes and Noble. Keep getting "Unlock Code Needed" message.

I am running Windows 8 and am unable to open .epub books downloaded from Barnes and Noble. Keep Getting "Incorrect Unlock Code" message. B&N help is useless. Any ideas?

the user name is not the B&N username, but the name on the billing address. And the credit card number used for the purchase is the unlock code.

I have Acrobat Pro DC and Adobe PDF Pack and I am still unable to open a PDF file from my outlook.

I have Acobat Pro DC and Adobe PDK Pack and I am still unable to oepn an PDF filed from my Outlook. So I have to save it on my computer but then I can only open it in Adobe Reader. Please help

Hello courtneym48375386,
Could you please let me know what version of Outlook are you using.
Please try opening some other PDF file and check if the same issue persists as this might be a document specific issue.
Also, what happens if you try opening the file in Acrobat?
Let me know.
Regards,
Anubha

Unable to open directly libreoffice files from firefox. The files have to be saved everytime and opened separately with libreoffice

Firefox ver: Nightly for Ubuntu
Unable to open attached libreoffice document & spreadsheet files in firefox. The files have to be saved and then opended with libreoffice later.
Not facing the issue in Ubuntu 11.04

What extensions do you have installed? To get a full list, do the following:
In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy all to clipboard''. Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Using the Troubleshooting Information page]].
Thanks in advance for your help!

Unable to open large PDF file from the Attachment list.

Hi Gurus,
Users had attached 10 PDF file in the work order attachment list and his supervisor is trying to open the PDF file from the work order attachment list and he is able to open 9 PDF files without any issue, but 1 PDF file is giving the error message as "Database error for <GET DATA FROM KPRO>" and then select ok, we are getting the below message.
Window cannot find u201CC/Documents and Settings/b2m/SaoworkDir/5015851 Vendor data sheets B&P 2010 SDown XXX .PDFu2019. Make sure you typed the name correctly, and then try again. To search for a file, click the start button, and then click serch.
Looks like this particular file is not transferring to the SAP work directory.
Could you please check and suggest us as to how to fix it.
Thanks & Regards,
Srivas

Hi,
Thanks for your reply.
We verified your OSS notes it's not relevant to us Because our issue is while opening the PDF aatchement it is not transferring to my SAP Work Directory because of that reason we are getting the KPRO error. When I'm opening the other PDF files it's transferring to my SAP Work Directory and it's automatically open without any issue.
Please check and suggest.
Thanks,
Srivas

Unable to open SharePoint 2010 task from any Microsoft Office application - cannot open a new form (schema validation errors)

I can’t get the Microsoft Office SharePoint Task integration to work with any SharePoint 2010 Workflows. When any end user clicks the “Open this task…”
button from outlook (or any other office application) a warning dialog appears stating that:
“Outlook cannot open a new.
The form contains schema validation errors.”
The error details are:
Element '{http://www.w3.org/1999/xhtml}div' is unexpected according to content model of parent element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}Body'.
Some points to note:
I can replicate this using on several computers running as different users.
I have full control over the site and the task I am trying to open.
When I navigate via the SharePoint site I can open the task.
The Info Path form that cannot be opened was automatically created by automatically SharePoint designer / InfoPath. I have subsequently deleted the form and published
the workflow (which created the InfoPath form again).
I am running Mircosoft Office Professional Plus 2010 version 14.0.5128.5000 (32-bit)
One workaround is to remove the “Open this task…” button as per
http://social.msdn.microsoft.com/Forums/en-US/sharepoint2010general/thread/eb273ee9-6a4b-409c-8eb0-5351bb113386/. This is not ideal and will be my last resort.
Any suggestions and or thoughts appreciated.
Thanks!

Yes, I tried that. It did not work for me.
I have 4 site collections. The main site collection is the only one that I receive the error.
When the user clicks on the email link and opens the document for approval, they receive the following error when they click on "Open This Task".
Element '{http://www.w3.org/1999/xhtml}a is unexpected according to content model of
parent element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}Body'.
There is nothing wrong with the task list itself, just the link from the Office 2010 client.
I am wondering if there is a web config or other file on the server that is specific to the site collection??
Tracey

Unable to open CR2 RAW file from canon 5D mark III

Installed cs6 which seemed to be working just fine until I attempted to open a CR2 file from a canon 5D Mark III, will not open, checked for RAW updates, nothing.

Hello, you will need to install Camera Raw 7.1 RC available in the labs: http://labs.adobe.com/technologies/cameraraw7-1/

Unable to open jpeg in photoshop from Bridge

Hi
I recently installed CS5 Production Premium on a Windows 7 computer. I have been unable to open Jpegs by right clicking the mouse. When I get the 'open with' tab, the default states Com Surrogate 6.1.
I am unable to ascertain how to set Photoshop as the default programme to open JPEG files.
Any assistance woul be appreciated!
Regards
RoeBean

Default programs (at least in CS3) are in edit/preferences/file type associations. Scroll down the list to change the default opening program.

Why am I unable to open or delete files from hotmail while using firefox browser

I am unable to open or delete emails in my Hotmail Inbox or Junk files while using Mozilla Firefox browser but if I use IE I can open with no problem

See https://bugzilla.mozilla.org/show_bug.cgi?id=665140
This works in newer versions of Firefox, but some users of 3.6.23 are having issues.

Standby database unable to fetch missing archive sequence from primary

Hi,
My primary oracle db version is 10.2.0.5 which is n Windows 2003 server 32 bit in file system
My standby database version is 10.2.0.5 which in wondows 2008 server in ASM instance.
some of the archivelogs are not fetching by standby database from primary db.because of that recovery is not happening and it waits for missing archive logs but its not transfering on satndby database.
I tried many time by doing manuall..manuall its hapening but again sometimes its stucks and waits for next missing archivelog.
standby alert log mesage
Sun Jul 08 21:33:13 Pacific Daylight Time 2012
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 128945-128945
DBID 4176230406 branch 617106566
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
Sun Jul 08 21:44:03 Pacific Daylight Time 2012
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
trace file of standby
Dump file d:\oracle\admin\mks01p\bdump\mks01p_mrp0_6628.trc
Sun Jul 08 21:30:23 2012
ORACLE V10.2.0.5.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Oracle Label Security, OLAP, Data Mining and Real Application Testing options
Windows NT Version V6.1 Service Pack 1
CPU : 8 - type 8664, 4 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:37019M/49108M, Ph+PgF:87277M/103214M
Instance name: mks01p
Redo thread mounted by this instance: 1
Oracle process number: 19
Windows thread id: 6628, image: ORACLE.EXE (MRP0)
*** SERVICE NAME:() 2012-07-08 21:30:23.422
*** SESSION ID:(95.1) 2012-07-08 21:30:23.422
*** 2012-07-08 21:30:23.422 64949 kcrr.c
MRP0: Background Managed Standby Recovery process started
*** 2012-07-08 21:30:28.445 1170 krsm.c
Managed Recovery: Initialization posted.
*** 2012-07-08 21:30:28.445 64949 kcrr.c
Managed Standby Recovery not using Real Time Apply
*** 2012-07-08 21:30:39.833
Recovery target incarnation = 1, activation ID = -118713082
Influx buffer limit = 10000 min(50% x 191963, 10000)
Successfully allocated 7 recovery slaves
Using 158 overflow buffers per recovery slave
Start recovery at thread 1 ckpt scn 7982577982885 logseq 128945 block 2
*** 2012-07-08 21:30:40.784
Media Recovery add redo thread 1
*** 2012-07-08 21:30:40.784 1170 krsm.c
Managed Recovery: Active posted.
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '+ORAREDO3/mks01p/mks01p_redo01b.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO3/mks01p/mks01p_redo01b.rdo
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-00312: online log 1 thread 1: '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '+ORAREDO3/mks01p/mks01p_redo01b.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO3/mks01p/mks01p_redo01b.rdo
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-00312: online log 1 thread 1: '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
*** 2012-07-08 21:30:40.940 64949 kcrr.c
Clearing online redo logfile 1 +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '+ORAREDO3/mks01p/mks01p_redo01b.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO3/mks01p/mks01p_redo01b.rdo
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-00312: online log 1 thread 1: '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-00349: failure obtaining block size for '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
Error 349 creating/clearing online redo logfile 1
*** 2012-07-08 21:30:40.987 64949 kcrr.c
Clearing online redo logfile 1 complete
*** 2012-07-08 21:30:41.034 64949 kcrr.c
Media Recovery Waiting for thread 1 sequence 128945
*** 2012-07-08 21:30:41.050 64949 kcrr.c
Fetching gap sequence in thread 1, gap sequence 128945-128945
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:30:41.533 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:30:41.533 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:31:11.610
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:31:12.094 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:31:12.094 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:31:42.186
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:31:42.654 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:31:42.670 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:32:12.747
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:32:13.215 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:32:13.230 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:32:43.276
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:32:43.759 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:32:43.775 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:33:13.821
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
i created new password fle on bith primary and standby database also.
Please help me to resolve this issue.

ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mountedhave you mentioned parameter LOG_FILE_NAME_CONVERT in standby when online redo log locations are different?
post from standby:-
SQL> select name, state From v$asm_diskgroup;
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privilegesPost from primary & standby
SQL> select * from v$pwfile_users;
User Profile for 919131
919131
Handle:     919131
Status Level:     Newbie
Registered:     Mar 6, 2012
Total Posts:     16
Total Questions:     8 (8 unresolved)
OTN failed 100% to help you, then why you posted another question?
First close all your old answered threads and then better continue your updates in your thread.
Edited by: CKPT on Jul 9, 2012 11:45 AM

Unable to open only particular website from office which is site to site VPN site with juniper firewall

All,
when I tried to open a website I am getting request timed out after few minutes ,I have done a wireshark capture but unable to identify the problem particularly the url /timetracking/home.asp is not working ,can you help out here. please find attached capture from source to destination and vice versa.
Thanks in advance.

Yes, I tried that. It did not work for me.
I have 4 site collections. The main site collection is the only one that I receive the error.
When the user clicks on the email link and opens the document for approval, they receive the following error when they click on "Open This Task".
Element '{http://www.w3.org/1999/xhtml}a is unexpected according to content model of
parent element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}Body'.
There is nothing wrong with the task list itself, just the link from the Office 2010 client.
I am wondering if there is a web config or other file on the server that is specific to the site collection??
Tracey

Is there a cure against apple tv3 being unable to open videos or music from itunes library?

HI!
I recently bought an apple tv and was trying to playback video and audio files on it.
activation of homesharing has been rather smooth (although i did have to open and close itunes several time). apple tv3 is able to download the library and lets me surf it.
my problems start when i attempt to open more than one video/song (one after another of course). It shows this circle which indicates download but does nothing. i'm able to exit from this screen but any attempt to open any file afterwards brings me the same result - running circle/star with no playback.
i read support info on the apple page and have followed more or less all recommendations, starting with allowing tcp/udp ports, making sure taht itunes is not on firewall, disabling power management on my wireless adapter, etc.
the most exciting thing is that i have the same problem if i run remote app on my iphone and/or ipad - it stops seeing itunes after a while. at the same time if i pair my ipad/iphone with itunes manually (using 4 digit password) it works smoothly.
tech specs: latest itunes running on win 7, latest software running ipad/iphone/appletv. connection over wifi.
i assume there must be a bug in the way itunes communicates with devices in the apple ID related homesharing. otherwise i can't explain why remote app works smoothly with itunes library in password pairing mode.
Has anyone faced anything similar and found a cure against the problem?
I hear different opinions re firewall, antivirus software (i use kaspersky). i'm not technical guy but assume if those pieces of the system allow to play one or two songs and then freeze, i don't think that the problem is in those pc.
WOudl be grateful for constructive feedback, hopefully with an easy solution:)
P.S> airplay from ipad, itunes, iphone works perfectly and without glitches.

Is this happening when playing from iCloud or locally from iTunes on your computer? If it is from your computer is the computer going to sleep? There is some bug in ATV that causes it to have problems being able to wake a computer that has gone into sleep mode. Some times it works fine and then sometimes for like a week ATV will not be able to WAKE the iMac. This can also be a problem if you are using an external hard drive and the hard drive is going into sleep mode. Also is iTunes running. If iTunes is not on then ATV can not connect to get content.

Suddenly I am unable to open a web page from a link in an email (eg notification from facebook) - usually have to unistall and then re-install but this is a nu

without any changes i am aware of, firefox suddenly stops opening from links in emails (thunderbird).
e.g. notifications from facebook.
Usually when this occurs I un-install and then re-install firefox and that fixes the problem but of course it interrupts what I'm doing and takes time. Is there a known cause and fix for this failure to open?

Make sure that Firefox is set as the default browser.
*http://kb.mozillazine.org/Default_browser
*https://support.mozilla.org/kb/How+to+make+Firefox+the+default+browser
*https://support.mozilla.org/kb/Setting+Firefox+as+the+default+browser+does+not+work

Plug-in PDF, Internet Explorer, unable to open a pdf file from web site. Question mark

Hello,
A computer where Acrobat 9 Standard and Acrobat Reader 9 have been installed.
When I try to read a pdf file from a web site and read it in IE, I get a popup whith a question mark and no text.
The pdf file is not open.
I have try to reinstall the last reader but the problem is not solved.
Thanks for your help.
fabrice

Any ideas how to solve this issue?
Try using Protected Mode Off. Then you will be at the same level of security that those other programs are running at. You could also try elevating the iexplore.exe task. That would turn off Protected Mode in that task automatically but then
you would be running also with Administrator level authority which might be excessive.
Robert Aldwinckle

I am unable to open PDF files created from another PGM.

Is there an ADOBE pgm that will properly read in PDF files created from another pgm and convert them to ADOBE PDF so they do not error when they are opened to be viewed by ADOBE pgm?

There is no way to know all the different scan/fax/pdf printers that are used to make the original PDFs...
CAD-KAS PDF Editor 2.6 is used to edit the files
doPDF 5 is used to modify pdf file.
Interesting, I can use the free CAD-KAS PDF reader to open & read the PDF file that the ADOBE XI reader
gives me the above error message.

Unable to open TestStand 2 sequence from TestStand 3

Similar Messages

Maybe you are looking for