Unable to open the BI Query after change in ODS structure

Dear All,
I have a query which is based on some ODS. I have added one more InfoObject to the data part of this ODS and deleted one of the existing one. Now when I try to open the existing query (so that I can include this new field) based on this ODS, it is not allowing me to go to the 'Change' mode.
Ultimately I end up closing my session.
Is there any other method to go to the 'Change' mode or else I need to design the query from the scratch again ?
Thanks,
Srinivas

Thanks All.

Similar Messages

  • Unable to open the PM order in change and display mode

    Dear All,
    Am facing some issue that am unable to open the Maintenance Order in Change and Display mode.
    Can you provide the solution.

    Hi Thirupathi,
    Can you send us a screenshot or the error message information ?
    If it is due to status missing (SAP note available for the same)
    Regards
    Terence

  • Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on get info . What am I suppose to change in the setting on getinf

    Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

    I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
    I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
    Thanks in advance.

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • I have created a form in InDesign, exported to a pdf, created an editable form and saved.  When I open the form and make changes and save, the reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is alway

    I have created a form in InDesign, exported to a pdf, then created an editable form and saved.  When I open the form and make changes and save, then reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is always minus the edits.   ????

    Hi chuck,
    If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
    Can you please send the form to me at [email protected]  so that I can have a look.
    Regards,
    Rave

  • I am unable to open the microsoft word and excel and pdf files after upgratding to 4.3.3 os version

    I am unable to open the microsoft word and excel and pdf files after upgratding to 4.3.3 os version. I was able to access them in 4.3.1 .
    Can anybody tell when is this getting resolved.

    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
    Your old Profile is located here in Vista & Win7: <br />
    ''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

  • After i export a file I am unable to open the saved file

    after I export a file I am unable to open the saved file

    Please see the solution I suggested here: http://forums.adobe.com/message/4315372#4315372
    Let us know if you have any questions!
    -David

  • Unable to install the trial version after the download is completed and Safari cannot open when I click to download again

    Unable to install the trial version after the download is completed and Safari cannot open when I click to download again

    aviatornilesh,
    You may try to restart the Creative Cloud application by quitting and relaunching it.
    This may be one for this specialized forum (where you may be able find the answer from previous threads),
    http://forums.adobe.com/community/download_install_setup
    or for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
    http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
    or for Adobe Support (phone),
    http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

  • After the ios7 update I have been unable to open the i-tunes store on my i-phone5, it basically flashes up for two seconds and then closes itself down, anyone else had anything similar and no a fix?

    Since updating to ios7.0.2 on my i-phone5 I have been unable to open the i-tunes store app, basically it just opens for a second or two then shuts itself down, I've tried a soft reset, turning on and off, closing down all running apps but nothing seems to work, anyone else had the same problem and no how to fix it?

    Hey there Fistycuff,
    It sounds like iTunes launches for a split second, then quits unexpectedly.
    I would recommend a few things for this issue. First, close all the running apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that, sign out of your iTunes account in Settings > iTunes and App stores, and restart the phone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, I would next backup your device to iTunes, and restore it:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities
    Regards,
    Sterling

  • Unable to open the Projects from Project center with the Alias name PWA 2010

    Hi,
    I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is  project server 2010,
    My system is ABC.DC.IN  alias name i have given is DEF.AD.COM  
    With the system name i can able access PWA and all are working fine.
    As i have observed with alias name i can able to login to  pwa and all the server  setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
    is coming in the below of the ie. 
    But with Alias name these are the issues i am facing,
    1.when longing with alias name its asking two times for user name and password
    2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
    3. I have observed one more thing if click on Project details then only this issue  is coming project schedule and project information is also opening with Alias name.
    can any one Help me. 
    Vijay kommireddi

    Hi
    Hope the below link will help you.
    And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
    Thanks
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

  • Error message: "Unable to open the physical file" when trying to attach AdventureWorks database

    I have searched the internet and this forum and have not found an answer...
    I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005.  I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'.  I attempt to run the following script:
    exec sp_attach_db @dbname = N'AdventureWorks',
    @filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
    @filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
    The error message I get back is:
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
    The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write.  I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist!  They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
    What do I have to do to install the AdventureWorkds database????

    Hello,
    To try to help you, please, could you give some more informations ?
    - the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
    - usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
    - could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
    - have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
    If no, download it and use it to attach
    in the object explorer,
    click on your instance to expand it
    right click on databases
    in the contextual menu, click on attach
    in the new form,click on add
    you arrive on a second form : find your file , click on it, and OK
    it's the simplest way to attach ( the sp_-attach_db is complicated to type )
    the error messages are sometimes more clear in SSMSEE than in Sqlcmd
    Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
    NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
    We are waiting for your feedback to try to help you more efficiently
    Have a nice day

  • One more solution for Silent Monitoring Windows 7 64-Bit - ERROR VOIP2037 Unable to open the NIC adapter for sniffing.

    Hi,
    we are using UCCX 8.5 SU3.
    After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
    In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
    After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
    I just learnt about the wonderful tool nicq.exe.
    And so i found out that the driver spcd.sys wasn't installed.
    Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
    It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
    After starting the NICQ.EXE as administrator the driver is being installed.
    Test 1: Check Driver Status
    Driver not installed. Attempting to install it...
    Driver has now been successfully installed.
    SPCD Driver service is not running. Attempting to start it...
    SPCD Driver service is now running.
    Test 1: SUCCESS
    And after that the silent monitoring works again like a charm.
    Maybe that info help someone.
    kind regards, sebastian

    Excellent information, this has been driving me crazy for a while now.  Once i saw this info I was able to get it resolved rather quickly.
    +5 for you, (I tried to click it above but it would not let me.)

  • Unable to open the document when combining files.

    We have a user that gets an error when combining files. It says
    Unable to open the document:
    <Filename and path>
    Please check to see if you have read permission for the above file.
    Retry and cancel buttons.
    We get this error on every subsequent file, it works on the first one after the computer starts.
    This computer has Windows Vista Business with SP2, Adobe Acrobat X with the latest patches.
    It doesn't matter if the files are local or on a network drive, the same always occurs. I have cleared
    all user and system temporary files, re-installed, verified the Acrobat Add-In for Word 2010 is active,
    verifed the PDF printer is working fine. It only happens when trying to combine files. I have given the
    user local administrator privilidges, tried with my account that has domain admin priviledges, no luck.
    I really need some suggestions...
    Thanks,
    Tom

    I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed.
    This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok.
    They said an update to correct this issue will be coming within the next quarter.
    TP

  • I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.

    I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.
    Also, does reinstallation takes the back up automatically or the files will be lost. Please help.

    Here are a bunch of scripts to get folder size under all circumstances.  Take your pick.
    https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
    ¯\_(ツ)_/¯

  • Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

    Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Maybe you are looking for