Unable to open the iTunes?

From morning I have been getting an error when ever I tap on the iTunes app saying " can't connect to iTunes " so does any one have any solution for that

Let me know if this is any help. http://support.apple.com/kb/ts1368

Similar Messages

  • Unable to open the iTunes store or download/update apps

    When I try to open the iTunes store on my iPhone i get the error "cannot connect to iTunes store". When I try to download or update apps I get the loading bar on the app icon, but it never downloads. I contacted apple support and was told to check here. I have already restarted the phone several times. I have disabled and enabled wifi. I verified that the issue is not the wireless network, because I have this issue on 3 different networks as well as 3G. I also have no problems using safari, I am writing this post from my phone. I would love some suggestions to fix this.

    Is iTunes endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?

  • HT1925 My ipod is not showing up when I have itunes up. I was told to remove itunes and reinstall however. I receive a message with unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-

    can someone please advise on what I should do? unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-4953-92FA-624BDF5D 85AB) VEIFY THAT YOU HAVE SUFFICIENT ACCESS TO THAT KEY, OR CONTACT YOUR SUPPORT PERSONNEL,  Which i did . I contacted the apple support and they could not help. has anyone gotten this error? Did some research some results show that this has occurred during updates on the itunes but has not seen how to successfully uninstall without getting this error. I attempted to use the control panel and uninstall but it provides me with the same error all the time. I NEED SOME Answers on this issue. Can you please help?!

    Perhaps try the fixit from the following Microsoft web page. (Try the "problems uninstalling" option.)
    Fix problems with programs that can't be installed or uninstalled

  • Where can i download quicktime 7.5.5? A compatibility version gets downloaded but its not what I need. Im unable to open my ITUNES without the quicktime 7.5.5 upgrade or higher. Anything higher isnt supported by my mac ( OS X 10.5)

    where can i download quicktime 7.5.5? A compatibility version gets downloaded but its not what I need. Im unable to open my ITUNES without the quicktime 7.5.5 upgrade or higher. Anything higher isnt supported by my mac ( OS X 10.5)

    I had the same problem when re-installing my old iBook recently. You can find it here:
    http://support.apple.com/kb/DL27

  • I am unable to open my itunes after maverick update.  Any suggestions?

    I am unable to open my itunes after maverick update.  Any suggestions?

    Hi there sharonlarks26,
    You may want to try reinstalling the latest version of iTunes. Take a look at the article below for more information.
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/kb/ht2311
    -Griff W.

  • When I open the iTunes store it tills me that I cannot connect ,how i can connect then??

    When I open the iTunes store it tills me that I cannot connect , how can I connect then?

    You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
     Cheers, Tom

  • TS1424 I am unable to open the Apps store. Any suggestions as to what the problem might be?

    I am unable to open the Apps store. Any suggestions as to what the problem might be?

    Hi Helen5012,
    When troubleshooting iTunes Store connection issues, the following articles provides the best information:
    First, try signing out of your account in Settings > iTunes & App Store. Once signed out, go ahead and sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    If the above did not resolve your issue, refer to the following:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    If you haven't been able to connect to the iTunes Store:
    - Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
    - Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
    - Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
    - Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
    - Try resetting (turning off and then on again) your Wi-Fi router
    - If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connectionsoriOS: Troubleshooting Wi-Fi networks and connections.
    Thanks,
    Matt M.

  • I have just updated my mac but now I am unable to open my itunes can someone help me please

    I have just updated my mac but now I am unable to open my itunes can someone help me please

    This worked for me:
    1 Go to the finder menu bar at the top of the screen
    2Click go
    3 click applications
    4 go down to iTunes and right click on Show Package Contents
    5 open contents folder then go to mac os folder
    6 open the terminal marked iTunes in that folder
    This should force it to open and function enough, it will not allow importing of music from a desk top

  • After the ios7 update I have been unable to open the i-tunes store on my i-phone5, it basically flashes up for two seconds and then closes itself down, anyone else had anything similar and no a fix?

    Since updating to ios7.0.2 on my i-phone5 I have been unable to open the i-tunes store app, basically it just opens for a second or two then shuts itself down, I've tried a soft reset, turning on and off, closing down all running apps but nothing seems to work, anyone else had the same problem and no how to fix it?

    Hey there Fistycuff,
    It sounds like iTunes launches for a split second, then quits unexpectedly.
    I would recommend a few things for this issue. First, close all the running apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that, sign out of your iTunes account in Settings > iTunes and App stores, and restart the phone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, I would next backup your device to iTunes, and restore it:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities
    Regards,
    Sterling

  • Unable to open my itunes

    I am unable to open my itunes on my PC.  The error message showing is: "This application has failed to start because MSVCR80.dll was not found.   Re-installing the application may fix this problem".  I've tried to reinstall itunes, with no success - it seems to jam.  Any suggestions or solutions?

    See if this post from turingtest2 helps (it's been a fairly common problem with the new version) : https://discussions.apple.com/message/24620553#24620553
    He also has this user-tip for troubleshooting problem with updating iTunes (written as a result of the current update) : https://discussions.apple.com/docs/DOC-6562

  • Runtime errror displayed R6034 when trying to open the iTunes program from my computer.

    I am unable to open my iTunes program from my computer. Immediately a box comes up displaying:
    Program: C:\Program Files\iTunes\iTunes.exe
    R6034
    An application has made an attempt to loead the C runtime library incorrectly and to please contact the application's support team for more info.
    What does this mean?
    I am currently on Windows 7 Home Premium 32-bit. I never had a problem, for last 2 years, until this past week when trying to access the program. I have an ipod that 5th generation touch ipod I sync to my library, which successfully will load and update any app needing to be updated, and play my music library with no issues.
    I just do not understand why I cannot open this program any longer from my computer.
    Thank you so much for any help!

    sounds encrypted if you dont know that password you cant restore.  have an icloud backup?
    see this about encrypted backups
    http://support.apple.com/kb/TS5162
    Peace, Clyde

  • Open doc URL: unable to open the report in same window

    Hi
    I'm trying to open a report using open doc url with "swindow=same" but still it opens in a separate window. This happens only when I use JAVA viewer. it works fine in ActiveX and HTML but I want this in JAVA viewer as i'm including this page in my JAVA application and it should open the report in the same window. I tried using "<a>URL</a>" and also target="_self" by HTML interpretation for that object but still the same problem. I'm unable to open the report in the same window by using JAVA viewer for Crystal Reports in info view. Please help me!!!
    Envirorment Details: Crystal Reports 2008 SP3, BOE XI R3 SP3
    regards
    Raghavendra.G

    I have tested that myself and It seems that HTML interpretation does not work with the Java viewer.
    I have also tried using a hyperlink containing javascript
    eg.
    javascript:window.location.href='http://www.sap.com'
    but the java viewer seems always to launch a new window before processing the command.
    I would recommend to open a case by SAP support ( httP://service.sap.com/support )
    Regards,
    Stratos

  • HT2292 hello i'm facing  problem  i downloaded iTunes version 11 32bit  and after i installing the set up when i opened the iTunes a massages  occur saying i tunes could not connect to iTunes store an unknown error occurred (-3212) even  though my interne

    Hello i'm facing  problem  i downloaded itunes version 11 32bit for windows 7 and after i installing the set up when i opened the iTunes a massages  occur saying i tunes could not connect to iTunes store an unknown error occurred (-3212) even  though my internet is on

    Try this...
    Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
    cmd /k netsh winsock reset
    Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
    You should get something similar to this:
    Reboot the computer and the problem should be resolved.
    If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
    tt2

  • Unable to open the Project web app Instnace , giving STS error

    I am unable to open the Project server web app instance from CA- Proejctserver application service -- Manage , it is giving error and I am unable to open the instance as well http://intranet.cmpy.com/pwa also giving error . LOg is showing as below
    An operation failed because the following certificate has validation errors:  Subject Name: CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US Issuer Name: CN=SharePoint Root Authority, OU=SharePoint, O=Microsoft, C=US Thumbprint:
    I have tried all the ways to fix STS error , is there any option to reprovision with out loosing the data and projects and subsites
    Srini

    By Creating the root certificate solved my issue
    Srini

  • Unable to open the Projects from Project center with the Alias name PWA 2010

    Hi,
    I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is  project server 2010,
    My system is ABC.DC.IN  alias name i have given is DEF.AD.COM  
    With the system name i can able access PWA and all are working fine.
    As i have observed with alias name i can able to login to  pwa and all the server  setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
    is coming in the below of the ie. 
    But with Alias name these are the issues i am facing,
    1.when longing with alias name its asking two times for user name and password
    2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
    3. I have observed one more thing if click on Project details then only this issue  is coming project schedule and project information is also opening with Alias name.
    can any one Help me. 
    Vijay kommireddi

    Hi
    Hope the below link will help you.
    And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
    Thanks
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Maybe you are looking for

  • Is there a dvorak keyboard option rather than just a QWERTY keyboard?

    So I've been recently trying out the dvorak keyboard settings since i've heard that its faster and easier to type. I wanted to see if the itouch has it but was disappointed to see that it does not. I've also got the 3.0 software and it doesn't have i

  • Itunes artwork cache

    Hello, I need some help please regarding itunes cache of artwork. I have a 500GB collection of music stored on an external harddrive, so I'm not worried about that. It's the artwork caches stored on my macbook air that seem to be taking up a large pa

  • Report script to have attributes

    Hi, I am developing a report script to extract the base dimension members as well as some of the attributes in the columns, followed by the last data column. I have the product dimension with 2 attributes (Brand and Origin). However, when I put all t

  • Uploading File url

    Hi All! When uploading file (using Flex FileReference) how can we know if the url is really accessible? What if the server is down or the session already expires? Is there a way for flex to know this? Thanks.

  • Images as hyperlinks.

    I'm trying to hyperlink some images on my pages, I can easily link words using the inspector, but for some reason images does not work at all. Does anyone know if it's possible to link images? Am I doing something wrong? Thanks, I'll be so grateful f