Unable to open the TDMS project.

Hi All,
I'm the midst of running a TDMS project. during the activities, after the deletion of data at receiver. try to reopen the project. It hangs.
Any idea, have check no dump, tablespace ok and the solman has been set no archive logs mode.
any idea.
Regards
Harziel

hi sandeep,
i;m still new in TDMS. Where should i check the logs for tdms. any how to update the db stats for that table.
My solman is running windows /oracle. my sender & receiver running on Unix/oracle
thanks in avdance.
Harziel

Similar Messages

I have saved my project to my harddrive and then when I try to open it on another computer that uses final cut I am unable to open the edited project

i have saved my project to my harddrive and then when I try to open it on another computer that uses final cut I am unable to open and edit the project

Assuming this is an external HD, use finder to select the drive with your original computer, then press Cmd+i to show info. Go to the bottom of the info window and make sure 'Ignore ownership of this volume' is checked so that other computers can access it.
Andy

This version of Visual Studio is unable to open the following projects. The project types may not be installed or this version of Visual Studio may not support them.

Hey,
I'm learning C#, using a book called "Learning C# by programming games". (2013)
It comes with a zip file containing samples to use in Visual Studio.
(I use Visual Studio Express 2013)
However, opening the .CSPROJ files in the sample folder provided by the book's website results in the error mentioned in the title of this ticket.
I would very much appreciate anyone taking the time to try and help me out.
Thanks a bunch in advance,
Erinn

Hi Erinn,
Could it have anything to do with the fact that the book uses XNA (and the sample projects were created with VS and XNA) and I use MonoGame with VS (since I my computer runs on windows 8,1)?
Yes, that's definitely the problem (I don't know about writing games, but I Googled "MonoGame vs XNA"). First result returned by that search is informative (although it doesn't tell you how to get around the problem):
http://stackoverflow.com/questions/21658493/is-monogame-just-xna
I know that doesn't help you, but it tells you that it's a common issue and if no one here can help, maybe some more Googling might turn up something. Actually, after some more Googling, this looks useful:
http://blogs.msdn.com/b/bobfamiliar/archive/2012/08/01/windows-8-xna-and-monogame-part-1-overview.aspx
http://blogs.msdn.com/b/bobfamiliar/archive/2012/08/02/windows-8-xna-and-monogame-part-2-getting-started.aspx
(UPDATE: especially Part 2, where he explains how to port XNA code to Windows 8 environment).
~~Bonnie DeWitt [C# MVP]
http://geek-goddess-bonnie.blogspot.com

Unable to open the Project web app Instnace , giving STS error

I am unable to open the Project server web app instance from CA- Proejctserver application service -- Manage , it is giving error and I am unable to open the instance as well http://intranet.cmpy.com/pwa also giving error . LOg is showing as below
An operation failed because the following certificate has validation errors: Subject Name: CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US Issuer Name: CN=SharePoint Root Authority, OU=SharePoint, O=Microsoft, C=US Thumbprint:
I have tried all the ways to fix STS error , is there any option to reprovision with out loosing the data and projects and subsites
Srini

By Creating the root certificate solved my issue
Srini

Unable to open the Projects from Project center with the Alias name PWA 2010

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
3. I have observed one more thing if click on Project details then only this issue is coming project schedule and project information is also opening with Alias name.
can any one Help me.
Vijay kommireddi

Hi
Hope the below link will help you.
And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Unable to open the wallet

I have no idea what to do with this
Oct 4, 2009 5:42:10 AM oracle.security.jps.internal.credstore.ssp.CsfWalletManager openWallet
WARNING: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
I also do not know if this error is related the wallet or even where to start
Oct 4, 2009 5:42:17 AM oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResultException
WARNING: Incomplete connection information
Oct 4, 2009 5:42:17 AM oracle.adf.share.jndi.ReferenceStoreHelper getReferencesMapEx
WARNING: Incomplete connection reference object
chuck

I have the same problem..
Does anybody have a solution?
Business Components: Load error.
Project: D:\Projects\JDev11\PPL\Model\Model.jpr
Dec 16, 2009 11:18:31 AM oracle.security.jps.internal.credstore.ssp.CsfWalletManager openWallet
WARNING: Could not open wallet. Wallet Version Not Supported
java.io.IOException: Could not open wallet. Wallet Version Not Supported
at oracle.security.pki.OracleWallet.open(Unknown Source)
...

Opening a TDM project in a native setup...?

I have a Logic project that was created in Logic 7 on a mac using a ProTools HD2 setup. I need to open this project on my Macbook using a NI KORE controller as soundcard. The project opens fine, but there is no sound.. The KORE controller is selected as core audio device in prefs/audio. Does anyone know how to do this?!??

Thanks, i couldn't change this in the arrange window, but I could in the environment. So now I'm one step closer. However, since all the stereo files in the TDM project are split, I end up with two tracks for each file, which in itself is no problem as the files are linked like they were on the TDM system, but Logic makes the first track a stereo and the second one a mono, and plays them both. I have to manually either mute the mono track or set it to no output. Is there a way around this? Thanks

Open doc URL: unable to open the report in same window

Hi
I'm trying to open a report using open doc url with "swindow=same" but still it opens in a separate window. This happens only when I use JAVA viewer. it works fine in ActiveX and HTML but I want this in JAVA viewer as i'm including this page in my JAVA application and it should open the report in the same window. I tried using "<a>URL</a>" and also target="_self" by HTML interpretation for that object but still the same problem. I'm unable to open the report in the same window by using JAVA viewer for Crystal Reports in info view. Please help me!!!
Envirorment Details: Crystal Reports 2008 SP3, BOE XI R3 SP3
regards
Raghavendra.G

I have tested that myself and It seems that HTML interpretation does not work with the Java viewer.
I have also tried using a hyperlink containing javascript
eg.
javascript:window.location.href='http://www.sap.com'
but the java viewer seems always to launch a new window before processing the command.
I would recommend to open a case by SAP support ( httP://service.sap.com/support )
Regards,
Stratos

Error message: "Unable to open the physical file" when trying to attach AdventureWorks database

I have searched the internet and this forum and have not found an answer...
I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005. I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'. I attempt to run the following script:
exec sp_attach_db @dbname = N'AdventureWorks',
@filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
@filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
The error message I get back is:
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write. I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist! They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
What do I have to do to install the AdventureWorkds database????

Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on get info . What am I suppose to change in the setting on getinf

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Unable to open the downloaded file

Unable to open the downloaded file:
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.1.0 -> for Windows x86 -> File2
http://www.oracle.com/technetwork/middleware/performance-management/downloads/hyperion-foundation-1112-086772.html
Error message -
Cannot open file: it does not appear to be a valid archive. If you download this file, try downloading the file again.
Tried many a times and used various unzipping tool.

do not pause the download in the middle of the download.
with some download software, you can pause/stop the download in middle and continue.it will corrupt the software.
else in middle the due to network... it may corrupt.
check/compare the size with the original bytes mentioned in the oracle software download index size matches your downloaded file size.
try to download it again.
Good Luck.

I am unable to open the microsoft word and excel and pdf files after upgratding to 4.3.3 os version

I am unable to open the microsoft word and excel and pdf files after upgratding to 4.3.3 os version. I was able to access them in 4.3.1 .
Can anybody tell when is this getting resolved.

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

Unable to open the physical standby in read only (10g)

Hi,
I m trying to create physical standby using RMAN to another server . But at the last step when trying to test Real Time Apply i m unable to open the standby in read only mode.Can Anyone please let me know whats the issue and how to resolve it
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database recover managed standby database using current logfile disconnect from session;
Database altered.
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open read only;
alter database open read only
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1:
'/u01/app/oracle/product/10.2.0/oradata/test1/system.dbf'

Hi,
This is a newly created standby. I created just now. Below the o/p requested
In Primary
SQL> set line 200
SQL> set pagesize 200
SQL> col message format a90
SQL> select severity, error_code, to_char(timestamp,'DD-MON-YYYY HH24:MI:SS'), message from v$dataguard_status where dest_id=2;
SEVERITY      ERROR_CODE TO_CHAR(TIMESTAMP,'D MESSAGE
Error              12541 04-MAR-2012 11:55:05 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 12541.
Error              12541 04-MAR-2012 12:00:12 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 12541.
Error               1034 04-MAR-2012 12:06:25 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 1034.
Warning             3113 04-MAR-2012 13:21:24 ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3113)
Warning             3113 04-MAR-2012 13:21:24 ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error               3113 04-MAR-2012 13:21:24 PING[ARC1]: Error 3113 when pinging standby test1.
Warning             3113 04-MAR-2012 13:33:29 ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3113)
Warning             3113 04-MAR-2012 13:33:29 ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error               3113 04-MAR-2012 13:33:29 PING[ARC1]: Error 3113 when pinging standby test1.
Error               1034 04-MAR-2012 13:39:50 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 1034.
Error               1034 04-MAR-2012 13:45:29 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 1034.
Warning             3113 04-MAR-2012 13:57:56 ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3113)
Warning             3113 04-MAR-2012 13:57:56 ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error               3113 04-MAR-2012 13:57:56 PING[ARC1]: Error 3113 when pinging standby test1.
14 rows selected.
SQL> select     ds.dest_id id
,       ad.status
,       ds.database_mode db_mode
,       ad.archiver type
,       ds.recovery_mode
,       ds.protection_mode
,       ds.standby_logfile_count "SRLs"
,       ds.standby_logfile_active active
,       ds.archived_seq#
from    v$archive_dest_status   ds
,       v$archive_dest          ad
where   ds.dest_id = ad.dest_id
and     ad.status != 'INACTIVE'
order by
        ds.dest_id
/   2    3    4    5    6    7    8    9   10   11   12   13   14   15   16
        ID STATUS    DB_MODE         TYPE       RECOVERY_MODE           PROTECTION_MODE            SRLs     ACTIVE ARCHIVED_SEQ#
         1 VALID     OPEN            ARCH       IDLE                    MAXIMUM PERFORMANCE           0          0            64
         2 VALID     UNKNOWN         ARCH       UNKNOWN                 MAXIMUM PERFORMANCE           3          0            64In standby
SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
   THREAD# MAX(SEQUENCE#)
         1             64
SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
   THREAD# MAX(SEQUENCE#)
         1             64
SQL> select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC0: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery starting Real Time Apply
Media Recovery Waiting for thread 1 sequence 63
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
MESSAGE
RFS[1]: Assigned to RFS process 9880
RFS[1]: Identified database type as 'physical standby'
Media Recovery Log /u01/app/oracle/product/10.2.0/archive/test1/1_63_776981781.arc
Media Recovery Log /u01/app/oracle/product/10.2.0/archive/test1/1_64_776981781.arc
Media Recovery Waiting for thread 1 sequence 65
16 rows selected.

One more solution for Silent Monitoring Windows 7 64-Bit - ERROR VOIP2037 Unable to open the NIC adapter for sniffing.

Hi,
we are using UCCX 8.5 SU3.
After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
I just learnt about the wonderful tool nicq.exe.
And so i found out that the driver spcd.sys wasn't installed.
Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
After starting the NICQ.EXE as administrator the driver is being installed.
Test 1: Check Driver Status
Driver not installed. Attempting to install it...
Driver has now been successfully installed.
SPCD Driver service is not running. Attempting to start it...
SPCD Driver service is now running.
Test 1: SUCCESS
And after that the silent monitoring works again like a charm.
Maybe that info help someone.
kind regards, sebastian

Excellent information, this has been driving me crazy for a while now. Once i saw this info I was able to get it resolved rather quickly.
+5 for you, (I tried to click it above but it would not let me.)

Unable to open the document when combining files.

We have a user that gets an error when combining files. It says
Unable to open the document:
<Filename and path>
Please check to see if you have read permission for the above file.
Retry and cancel buttons.
We get this error on every subsequent file, it works on the first one after the computer starts.
This computer has Windows Vista Business with SP2, Adobe Acrobat X with the latest patches.
It doesn't matter if the files are local or on a network drive, the same always occurs. I have cleared
all user and system temporary files, re-installed, verified the Acrobat Add-In for Word 2010 is active,
verifed the PDF printer is working fine. It only happens when trying to combine files. I have given the
user local administrator privilidges, tried with my account that has domain admin priviledges, no luck.
I really need some suggestions...
Thanks,
Tom

I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed.
This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok.
They said an update to correct this issue will be coming within the next quarter.
TP

Unable to open the TDMS project.

Similar Messages

Maybe you are looking for