"Unable to open" WhatsApp download page, or download Appworld

Hello,
I have a Blackberry Z10 device.
My problems began earlier today when WhatsApp prompted me update it because the application is too old. When I pressed the "Update WhatsApp" link within WhatsApp, strangely nothing happened (it has always worked previously). So I thought I would instead download WhatsApp from the WhatsApp website, http://whatsapp.com/download . To my surprise, when I entered this URL in the browser it said "Unable to open appworld://content/2360?" I then realized that maybe my Blackberry Appworld has been accidentally deleted at some point because I can't find it on my phone.
So my next step was to reboot the phone and then try to download Appworld again from this link: www.blackberry.com/appworld/download
The page opened and told me "Visit www.blackberry.com/appworld/download from your smartphone to download." Of course, I already had this very page open on my phone, so that was a dead end. I went for the second option, to enter my email address integrated with my Blackberry smartphone and have a download link sent to me.
The link that arrived in my inbox was: http://mobileapps.blackberry.com/devicesoftware/entry.do?code=appworld
When I pressed this link from my smartphone, I was taken to a page that said, "Downloads via a USB connection are not enabled for this product. Please visit our mobile download site using the browser on your Blackberry." But I WAS on the mobile download site using the browser on my Blackberry. Nevertheless, even when I pressed the link to this mobile download site it brought me back to the same page about the USB connection. My phone was not plugged in with a USB cable at the time.
So I'm now at a loss as to how to proceed with re-installing Appworld and, subsequently, WhatsApp. Assistance is appreciated!

Similar Messages

After updating to Maverick on my Mac - unable to open numbers or pages docs on iPad or iPhone any suggestions or info?

After updating to Maverick on my Mac - unable to open numbers or pages docs on iPad or iPhone any suggestions or info?

I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
IT shoulldnt erase everything, bt it might, so back up just in case
should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer

?unable to open raw photo file after downloading camera raw 7.4 update?

Can anyone help please.
I recently had my lap top wiped and have had to re load CS6. I have also downloaded the camera raw 7.4 update (I use a Nikon D7100 camera) The update downloads without any problems, I go through download, install and then finish, but I still am unable to open my raw photos. I get the following message... 'if you are attempting to open a raw file from a digital camera, make sure you have the latest raw camera update installed'. I have no idea why it is doing this, or how to combat it. Any suggestions would be much appreciated. Thanks in advance.
Gail

Hi Benjamin,
You were right. It was the camera's provided software transfer system. I've copied them directly from the (same) card to the desktop and works.
Many many thanks! Cheers

I am unable to open a Zip file I downloaded.

I play an online golf game at www.wgt.com and to help my playng I downloaded an app from www.wgt.4fan.cz it is WGT Caddy PRO. I am unable to open the file. From reading the answers to other questions concerning opening Zip files, I downloaded Unarchiver and Stuffit Expander. Neither will open the files. There is a file WGTCaddy.exe, I get a box stating "We can't open application"WGTCaddy.exe" because Microsoft windows apps are not supported on OSX. The WGTCaddy.ini file brings the message 'A failure has occurred. The Stuffit Engine was unable to determine the file format. As for the Microsoft message, I bought my iMac from a 3rd party and it has Office 2008 and other Microsoft programs, I am able to open them all. There is a video on YouTube demonstratin how to download WGTCaddy PRO and install it. The person on the video says it is a ZIP file, I am a computer dunce, so I am taking what he says, that it is a ZIPfile, at face value. That is my sad tale, any suggestions? Might the app not be compatible with OSX? Could it be another type of file? I 'll appreciate any suggestions. Thank you all.

Exe files are Microsoft Windows executables and will not work on Macs. Your Office 2008 is Microsoft Office 2008 for Mac. That's why it works.

Unable to open Firefox 7.01 since downloading MAC Lyon.

Firefox will not open a browser window since downloading Lyon Operating system to my MAC.

Thanks for your help. I found the problem yesterday. The connectivity for the browser was set up wrong. Selected automatic and everything works fine now.

Unable to open .doc in Pages

Recently I had my laptop fixed at Apple. From this, they wiped everything out and upgraded all of my software. I came home and updated all of my iWorks programs - pages, numbers, keynote. When I typed up a document in Pages I exported it and saved it as a word document. Normally I can open the document back up after it was converted to a word document however, now I am unable to open up any of my documents which have been saved to a .doc. With this being said, I basically cannot open up any of my work which needs to be edited. What can I do to fix this problem?

An immediate remedy would be to download Libre Office, then you can work while investigating Pages issues.

Unable to open an '08 Pages document

Up until today I had no trouble opening Pages documents submitted to Blackboard, the college academic suite. I could open them, and return them with annotations for correction. But this semester one student with Pages '08 had difficulty, because being unaware of the student's version of Pages, I would return the annotated document saved as Pages '09, and the student was unable to open it. In Pages '09 there is no notification that a Pages '08 document is being opened.
Now the student submits Pages '08 documents in a way that I cannot open them at all. If I attempt to open the student document with Pages '08, this message appears:
+You need a newer version of Pages to open this document.+
I tried opening the same student document with Pages '09 and this message appears:
+The document "---- .pages" could not be read. The document does not have a valid format.+
Opening the student document's Information window, Pages '09 (version 4.0.3) is the default application. Under "more info" the "where from" details are as follows:
http://bb.grcc.edu:80/courses/1/SP101.4784.F09/attempt/29502701/s/(student name).pages?bsession=11755035&bsessionstr=session_id=11755035,user_id_pk1=37601,user_id_sos_id_pk2=1,one_timetoken=, https://bb.grcc.edu/webapps/blackboard/assignments/instructor/gradeassignment.jsp?course_id=_92633_1&outcomeDefinitionId=_312408_1&courseMembership Id=_23108551_1&cancelGradeUrl=%2fwebapps%2fgradebook%2fdo%2finstructor%2fviewGra deDetails&source=cp_gradebook2_view_grade_details&attempt_id=_29502701
Does anyone have an idea what I need to do?

I notice you say you have something on iOS 7.1 which does not work with Pages '08.
Peter
As I recall, the dropdown menu had no option for os 10.6.8. The sending computer works on os 10.7.5 and the receiving computer operates on 10.6.8. Both iMacs. The Pages app was downloaded from the same CD some time ago. The CD purchase was for three computers and has worked well until recently. No recent upgrades. Are the OSystems above compatible? Frank

Help: Unable to open documens in Pages on iPad2

Hi, everyone. About 10 minutes ago I've been unable to open any of the documents I have in Pages, Numbers, and Keynotes on my iPad 2. Is anyone experiencing the same problem and has any solution to this? Thank you for your cooperation - ysoerjoatmodjo

An immediate remedy would be to download Libre Office, then you can work while investigating Pages issues.

Unable to open documents in pages for iPad

I use iWork for work on a regular basis. All my documents are organized in folders. Some of my documents show inside their respective folders but I'm unable to open them. For example in one folder I have 12 documents raging from January thru December and I can see all of them, but when I click on December to open it doesn't do anything. Clicking on edit doesnt let me highlight it either. I can't delete it or open it. When logging in to iCloud the documents dont even show on there. Fortunetly I can recreate the damaged documents but I can't get rid of them. Anyone having the same issue who has successfully deleted these? Thanks

Hi Ankit,
Thank you for your advice, but Im still having problems.
Back to the OP. To avoid the threads getting confused, I suggest the other user starts a new one?
I have tried ensuring that PDFs are automatically opened by Adobe. I used the path you suggested. However, I'm still having the same problem.
When I went to do this, Adobe was listed in the "recommended" list of products with which to open PDF files. However, I ignored this and followed your guidance. Once I had done, nothing happened (i.e. Adobe icon was not added to the 'Other products' list below the 'Recommended').
To me, this speaks of either a bad installation or bad association in which something is causing Adobe not to recognise itself.
What else can you advise?
Is there, for instance, a way to have a clean removal of Adobe, and then reinstall? I don't even know if this will work.

Unable to open a new page with transparent background.

I must have hit something (or maybe several things), because suddenly I can't open a new page in Photoshop (CS2). I can see it's picking up the white background color (from the lower left corner of the tool menu), but I can't figure out how to change it. Also noticed that my camera is suddenly automatically savings pix as jpgs (instead of tiffs) which I think I read somewhere prevents removing the white background color . . . but even if I start by trying to create an empty transparent background and pasting my graphic into it (which is what I usually do), it still loads as a white one.
After fighting with the software for the past 2 hours, maybe I'm just too confused to see the obvious. I do know how to get a transparent background when all is running smoothly. (Have been doing it for years, without running into problems.) It's figurng out what the problem is tonight that has me running in circles. The answer probably is staring me in the face, but if it is, I can't see it. I need help . . . PLEASE!

Yes. When I select all and edit/clear the screen stays white.
Unfortuantely, it alsois not allowing me to grab a screen shot. I've tried both keystrokes and "Grab" (in Application Utilities.)
But the image in the layers panel is easy to describe.
1) When I open a new PS document and click on transparent, the icon is a small rectangle with a double line border that has a white space midway on each side.
Whether it is active or hidden, the box next to it just says "layer 1" (i.e., not background.
In this mode, the Transparency & Gamut settings show the following:
Grid Size Medium
Grid Colors Light
Below that are 2 empty boxes
In the bottom section, Gamut Warning shows a darkened out Square. A both ends of the Opacity bar (1% and 100%) it remains unchanged.
When I add an image, it does not add a layer. The icon just changes to a thumbnail of the image.
If I don't change them, the Transparency & Gamut pane remains unchanged.
point, I'm running out of time, so would switch to that other Adobe Application (with fewer options and tools, which came on the same disk as another Adobe graphic program ), but can't search for it on my computer because I don't remember it's name. But since it's not in the application folder, if it was not compatible with System 10, I may have removed it. By any chance do you know which application I'm referring to?

Oracle 10G Express:Unable To open DataBase Home Page

I am not able to open Database Home page.
http://127.0.0.1:8040/apex
I verified the below steps:
1.OracleListener and Service are starting up fine.
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
The OracleXETNSListener service is starting.
The OracleXETNSListener service was started successfully.
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
The OracleServiceXE service is starting.......
The OracleServiceXE service was started successfully.
2. netsat output - local host listening to port 8040
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>netstat -an | find "8040"
TCP 127.0.0.1:8040 0.0.0.0:0 LISTENING
3. Http port in database
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Aug 20 18:11:13 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> select dbms_xdb.gethttpport() from dual;
DBMS_XDB.GETHTTPPORT()
8040
SQL>
4. Disabled Personal Firewall before starting the Service and Listener
5. listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 8040))
DEFAULT_SERVICE_LISTENER = (XE)
CONNECT_TIMEOUT_LISTENER=10
6.tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 8040))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
7. Listener log when i try to open the database home page.
Started with pid=180
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8040)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
20-AUG-2006 17:28:23 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
20-AUG-2006 17:30:34 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
Can someone help me how to get to the home page.

What does your lsnrctl status give you?

Http 500 internal server error unable to open CCM admin page

When i install CCM 4.1.2 the admin page was opening without having any problems. Eventually CCM admin page is not opening.
=======================================
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Open the fasi home page, and then look for links to the information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer
=========================================Any particular reason

Thanks for Reply; the page is https its not opening https://fasi/CCMAdmin/Main.asp
How do i check the proxies?
I can see there is red error icon on IISAdmin.

Unable to open WebIC default page in the browser

Hi Experts,
When I am trying to open WebIC default page in the browser, below error is occuring. I am using CRM5.0 system.
Note
The following error text was processed in the system XXX : Exception condition "HTTP_COMMUNICATION_FAILURE" raised.
The error occurred on the application server XXXXXX_XXX_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_HTTP_CLIENT~RECEIVE of program CL_HTTP_CLIENT================CP
Method: CREATE_SESSION of program CL_SAM_BSP_SESSION_LAUNCHER===CP
Method: START_WORKER_SESSION of program CL_ICWC_SESSION_REGISTRY======CP
Method: ONCREATE of program CLO23UTXK1DHIM8WX0QZD2TBW2KZ9CP
Method: %_ONCREATE of program CL_O23UTXK1DHIM8WX0QZD2TBW2KZ9CP
Method: DO_INIT of program CL_BSP_PAGE===================CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Please help me in resolving this issue.
Thanks & Regards,
jp

I'd suggest looking that these notes
1045941 - HTTP Client: Incorrect request URI II
Note 1144511 - Blank screen when starting CRM WebClient or IC WebClient
1244321 - Simplifying error analysis in CRM WebClient UI
1242835 - IDES CRM 2007
1168941 - Simplifying system setup
612670 - SSO for local BSP calls using SAP GUI HTML Control

WHy can I no longer open multiple tabs; whenever I try each tab is opened but no page is downloaded but no error messages are displayed

Each tab displays the usual rotational 'downloading' icon but even if I wait several minutes nothing happens.....
Even if I halt all or close all tabs bar one I am no longer able to download any pages unless I close Firefox completely and restart.
Upon restart I can then open tabs slowly one at a time but if more than one of my open tabs tries to update similtaneously then the problem reoccurs and I have to restart Firefox once again.
I have tried removing & reinstalling Firefox as well as creating an all new profile (importing only bookmarks) with no change

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I am unable to open my updates after they download.

I've downloaded 3.6 but it will not open or update Firefox on my Desktop. Other downloads will not open either.

Hi there sharonlarks26,
You may want to try reinstalling the latest version of iTunes. Take a look at the article below for more information.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
-Griff W.

"Unable to open" WhatsApp download page, or download Appworld

Similar Messages

Maybe you are looking for