Unable to open words document after the latest mac office update

I hv just updated my Office for Mac after being prompted to do so. however, we was not able to open my words doc after that.

It's possible you've reset the crop option during the placement of another PDF or .ai file and it's set to somethign that doesn't exist in the PDF you are trying to place (Bleed box, or Trim Box are likely candidates). Try showing the options when you place the file and check the crop options. It should be sticky for both PDF and .ai until changed again.

Similar Messages

Unable to Open Word Documents Since Mavericks 10.9.5 Update

Since updating to Mavericks 10.9.5, I can no longer open Word documents that were created/edited between 8-27 and 9-18-14, and that I had opened 9-17 and earlier. I receive the following message when I attempt to open a document:
"Word cannot open this document. The document might be in use, the document might not be a valid Word document,
or the file name might contain invalid characters (for example, \ /)."
I have Microsoft Word for Mac 2011, version 14.3.5., and a MacBook Air 1.8GHz, Intel Core i7, mid 2011. Can you help?

Anybody else experiencing this? No mention of effects on Quicktime in the 10.9.5 upgrade notes.
Unable to duplicate your problem in random tests of my library. M4V (H.264/AAC/AC3/Chapter encoded) files continue to play normally in both QT 7 and QT X players. Anything special about your files or anything unusual happen during the system upgrade installation?

Unable to open word document in CV02N

Hi Guru's
Am unable to open word documents in CV02N & CV03N.
While i try to open word document which is been already uploaded,Am getting the message as                                                       "26.112 bytes transferred" but document is not getting opened while a temporary files are getting created in C:/.
I av done complete settings in DC20 & DC30...but stil unable to open word documet.
Kindly help me to resolve this issue..
Regards
Bhanu

Hi,
Below are the work station application settings done for word document
WS application: DOC
Description : Win word 6.0
Archive identification: *
File suffix for appl.: doc
File format : .doc,.docx
MIME type: application/mswinword
Start Authorisation is Enabled.
PC     DOC      1     Winword 6.0     wwiexe32.exe
PC     DOC      2     Winword 6.0     wwiexe32.exe
PC     DOC      3     Winword 6.0     wwiexe32.exe
Regards
Bhanu

HT6114 After the latest OS X update (10.9.2) I cannot open Outlook (Office for MAC 2011). Outlook flashes briefly then nothing happens. How can I get Outlook to open?

After the latest OS X update (10.9.2) I cannot open Outlook (Office for MAC 2011). Outlook flashes briefly but does not open. How can I get Outlook to open?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

I cannot open my documents in the latest version of pages

I just updated and downloaded the latest update to pages. I tried to open my documents in the documents folder and it tells me I need the latest version to open the document ! When I click on the app store it tells me it is already installed. I am very annoyed and frustrated Maybe I should return to Windows !!!!

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 90 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Unable to Open Word Docs Unless the Word Application is Open

Hello All,
I recently switched from PC to Mac. I installed Office and when I attempt to open a Word Document I get the following message, "The operation could not be completed. An unexpected error occurred (error code 10660)"
I am able to open any Word document when Word is open.
Is this normal? On the PC all I needed to do was open a Word Doc and the Application opened automatically.
Thanks,
Jim

Select a Word document in the Finder, choose Get Info from the File menu, select Word under Open With, click on Change All, and confirm your action.
(31406)

My HP LaserJet 1320 quit working correctly after the latest 10.8 update. HP site is useless. What do I do?

I'm working on a 2005 iMac with 10.8.5. After the latest update my HP LaserJet 1320 will only print one page then I have to shut down the printer and the computer and start all over again. The HP site is useless. Since the printer driver came from my latest update from Apple, there must be something I can do at this end. How do I get to the just printer driver to try loading it again? How do I go back to a printer driver that works?.

I am using Mountain Lion. I reset the system a thousand times. The Mac communicates fine with the printer, that's not the problem. Somehow, recently something changed in the ppd file for the LaserJet 1320 that it simply does not print properly. For instance, I sent a job to print two pages, and use the duplex. The duplex works, but then the other side comes out empty. Is there a place I can find the old - less secure, I don't care, I just want to print - ppd file for controlling the printer? I think the printer only supports certain level of Postscript commands, and the new ppd file expects a new level. This printer is 8 years old after all. If I plug the printer in Linux, it prints the same document fine.
Thanks for any help

I lost my user folders after the latest Mac Os upgrade

I noticed the change first trying to use Nikon View NX2 to work on my desktop images. They were no longer accessible. Looking at the folder list both in View NX2 and in the Mac Finder, I could no longer find my user profiles which allow access to all of my pictures as well as my desktop--all my individual folders. This happened right after the latest Mavericks upgrade.

It turned out to be a bug in the release of iTunes 11.2. iTunes 11.2.1 supposedly fixed it.

Unable to open InDesign documents after updating to InDesign 2014

Hi
Just recently updated to InDesign 2014 everything was working fine before the update but now I am unable to open some InDesign from a network location. It just shows a general error "Cannot open "xxxx.indd".
I have tried removing all InDesign app and reinstalled InDesign 2014 but same error appears.
Strange thing is if I do not tried to open the file and copy the file locally it will open but if you attempt to open the file from network location, get the error then I can not copy the file locally.
Abit lost with this one wish someone can shed some light.
Regards

Are you using SMB to connect? There are a number of reports of different types of problems with CC 2014 and the SMB protocol on Mac.

Unable to open pdf-files since the latest INDD update

Hi there!
Since I updated my CS 5 I can't place the great mayority of absolutely ordinary pdf files into any kind of indd documents. The "best": if I open the last document where I placed some pdf, delete one on them and try to re-place exactly the same pdf again, my german, legal version tells me "Opening of the pdf-file impossible" literally translated.
If I copy-paste a placed pdf from a indd document to another instead it works - I can paste the pdf, but I cant place it (same file!!)
Does anyone have a clue?!
WIN 8 X64, INDD Version 7.0.4
Thanks!
Sebastian

It's possible you've reset the crop option during the placement of another PDF or .ai file and it's set to somethign that doesn't exist in the PDF you are trying to place (Bleed box, or Trim Box are likely candidates). Try showing the options when you place the file and check the crop options. It should be sticky for both PDF and .ai until changed again.

How I Got iTunes to Work After the Latest (So-Called) Update

Does anyone at (cr)Apple test updates before releasing them?!! My iTunes, as I see has happened with many, MANY others, would not open after downloading the latest update. Here's what I did to fix this issue:
1. Go into Windows Control Panel, click on "Programs and Features", and find both Apple Application Support & Apple Mobile Device Support. Uninstall both of them (in my case, both applications were listed twice, with two different version numbers. Ihad to uninstall the newer one first, before I could uninstall the older version).
2. Download the correct version of iTunes for your operating system (32-bit for 32-bit versions of Windows; 64-bit for 64-bit versions of Windows), and SAVE it (NOT run!) somewhere, like your desktop.
3. Once downloaded, right-click on the file and use a program like 7-Zip to extract the files somewhere you'll be able to locate them (in my case, "ITunes64SetUp").
4. Go into the folder and find the follwing two files or programs: "AppleApplicationSupport.msi" and "AppleMobileDeviceSupport64.msi" (or, I'm assuming if your system is 32-bit Windows, that last one would be called "AppleMobileDeviceSupport32.msi" or maybe just "AppleMobileDEviceSupport.msi).
5. Double-click each one and that will launch the install programs. Follow the prompts and install both.
6. After that, your iTunes should work correctly. Mine did!
Good luck!
This is ridiculous that we have to do this - the average computer user would have NO idea how to fix this!

Quit iTunes.
Copy the iTunes Folder to the D drive, leave a copy on the C drive.
Then open the XML file in the C drive in the iTunes folder with a Text editor with "Find and Replace" ability.
Correct all the partial pathnames so it matches the new location where the iTunes Folder is now.
Example:
Find: C:\Windows\Users\Johnny\Music\iTunesFolder... to
Replace: D\\Music\iTunesFolder....
Quit iTunes and transfer all the folders out of the iTunes Folder on C except the two single files, including the XML you edited.
Start iTunes and click on one song you have but dislike, if it plays your fine. Leave the C/iTunes folders alone to make sure it works for all your content, then finally back it up or delete it to make room on C. Do a Windows defrag on C for increased performance.
If you get a Explanation Point in iTunes, it didn't find the file and you didn't correct the pathnames correctly..

Remote no longer works correctly after the latest Apple TV Update

I hope someone can help.
I have the latest Apple TV, purchased this year, and the update that was just released really messed things up in using a remote control. I've tried with both the original apple remote and my Harmony multi remote.
I can unpair/pair fine with either, but navigation just plain doesn't work. I press the down arrow, it may not move at all, it may scroll all the way down to the bottom of the screen, or anywhere in between. I press the select button, the icon on screen may do nothing, it may start to wiggle, or it may actually select it. Sometimes double clicking the select works as a single click.
After a lot of play around to get it to do what i want, i was able to do a full restore to factory, but that didn't change anything with the remote and now i cannot join the home sharing because the remote wont work well enough, so i can't use the iphone app.
As I said, I tried a full restore to factory, powering the Apple TV off, 2 different remotes, nothing works, help!!!!!
I have a pretty big iTunes Anime collection and I want to watch it!
I have an older Apple TV, but I'm afraid to even plug that in if the update is bad.

Sounds very odd - could be a hardware issue rather than software if more than 1 remote is affected. Strangely though some of my older white remotes seem to have beome very poorly responsive recently and I've replaced batteries in them only a few weeks ago, I think their keys are failing though.
If you have a recent iPhone this might help asssuming the bad AppleTV is an AppleTV 3:
Apple TV (3rd generation): Using an iOS device to set up ...

Airport Extreme-won't connect after the latest Apple software update

My iBook will no longer connect to the wi-fi provider at our marina since the last two security updates to 10.3.
The iBook works just fine with all other wi-fi signals in fact pulls in one that's a half mile away! Yet, it will not connect nor show signal strength with this one wi-fi provider. They haven't changed their signal and it occured immediately after I installed the latest software updates.
When I shut down the computer today, for just a moment, a message flashed "should I grant permission to allow the marina wi-fi to connect". But it was gone before I could "click" on the button. Haven't been able to get that message again. I've tried to re-connect via "Other" and keying in the wi-fi system name and password but no luck.
How can I restore my connection to this wi-fi?
Thanks,
iBook G4 Mac OS X (10.3.9) Airport Extreme
iBook G4 Mac OS X (10.3.9)

I had this issue last month after upgrading Quicktime and downloading a security upgrade. For some reason (which Apple couldn't derive), the upgrades for their products screwed up my Keychain, and the only way to fix it was to reset my Keychain. Like you, I run 10.3.9, and this happened with two different upgrades on both my iBook and my iMac.
The reset process is as follows:
Go to Keychain Access in Utilities
Access Keychain First Aid (under Window menu)
Choose Options
Choose "Reset Keychain"
What a pain...I've stopped downloading upgrades from Apple until this gets resolved. Of course, that's not a good "solution" either.
John

Develop Module is not working after the latest 5.5 update.

I have uninstalled and installed from the direct link.
Cleaned up and optimized the catalog, etc.
Images are visible in the library and develop module, but if I try to start editing - there are no changes visible, unless I go to Library and back to Develop.
If I click "before/after" the blank screen appears.
Help! This is a major work issue for me!

Ok, I'm back!
- apply develop settings (via preset), if so: is it a custom preset?
I did apply a special preset (custom), just recently. Right now, uploading images without. Will see if that makes any difference. (Update) - NO difference.
- apply metadata
Copyright and Creator, but has done so for a while
- apply keywords
Yes. Always
- rename files
No.
Does Develop misbehave in the same way for all your images, or is it for a subset of the images? (Do you have any jpegs in your catalog? If so, does develop work for them?)
Do have some JPG, but generally all raw and it misbehaves with them all.
Have you tried making changes in Develop with the image zoomed in to 1:1? If so, is the behavior still the same?
Yes. At different zoom levels. Same problem.
Have you tried removing the *Previews.lrdata package that sits next to the catalog? Would need to do this while Lr is not running. (This will cause the need to regenerate previews, which can impact performance for a while.)
Mmmmm... I removed a bunch of things last time, maybe it was part of it... Can't find it right now. Where would it be?
Have you tried purging the Camera Raw cache, in the 'Camera Raw Cache Settings' of the 'File Handling' tab in the preferences?
Yes. No change.

After the latest Mountain Lion Update I am missing emails

I recently installed an update for Mountain Lion on my desktop iMac and now all my emails prior to 9/24 of this year are missing. Did something change in how they are stored? I can't think of why they would be gone!

When going to your software updates on your device it will provide you with the latest available update for your device.
the iPhone 4 will update to iOS 7.0.4 provided all other updates the device is asking for has been completed.
Good luck friend.

Unable to open words document after the latest mac office update

Similar Messages

Maybe you are looking for