Unable to open .xslm file in Excel from Document Library

When selecting edit on an Excel Macro file opens Excel Web App, with the warning 'Data validation', 'VBA Project', ... click Cancel and open it in Excel, but nothing in SharePoint will allow document to open in Excel.
Using the ribbon 'Edit Document' result in an error: We're sorry, we couldn't find a program to this document.
Ideas?
P.S.
Open Documents in Client Applications by Default is Active.

Let's eliminate the obvious:
Does the computer you are accessing the site with have Excel 2010 or 2013 installed?
Are you accessing the site using one of the
supported browsers: IE 8-11 (32-bit), Chrome (Latest), Firefox (Latest), Safari (Latest)?
Can you open other Office files (.xlsx, .docx, etc)?
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Similar Messages

STP3 unable to open sample files in Ableton Live's library

Hi,
I have purchased some sample libraries that are installed under ~/Library/Application Support/Ableton/Library. These samples are .aif files, and I'm able to open them under Bias Peak and with any other application I've tried. I'm unable however to open them in Soundtrack Pro 3. It reports the following error: "An Unexpected Error CNSExceptionWrapper
type = 16777216, error = 0, message = Audio data format is not supported."
I notice when I look at the file info in Peak, it gives the compression type as 'able'. On the other hand, the file shows as 'raw' 16 bit AIFF below Peak's waveform display. So I tend to think it's just a PCM file, with an odd tag.
Has anyone else run into this? Is there any way I can coax STP3 into opening this file?
thx,
-Luddy

You might have to open them with Peak or the Loop Utility, do a save as, and use the resulting file. That's the only thing I can think of.

How to open a index.html page from document library rather than download

Hi,
I have uploaded a website template folder structure to Office 365. Like this
When i click index.html the file gets downloaded to my pc. What i am trying to do is:
Open the index.html file in new tab so that i can show demo for my site template?

Hi NirajZ,
You can't view the html file that uploaded in the SharePoint document library or List as attachment.
If you wanted to see the html file in the SharePoint, Create the Content Editor WebPart and copy the html url in the link.(Edit the Content Editor WebPart and Check the Properties)
Murugesa Pandian | MCPD | MCTS | SharePoint 2010

Unable to open Macro file in Excel 2013 but opens fine in Excel 2010

Hello,
Hopefully someone can help us. We have a Macro Excel file created with Password Protected to open as well as to Modify. The file opens fine in version 2010. However, in Excel 2013, we get an error message "Cannot run the macro "filename.xlsm'!QC'.
The macro may not be available in this workbook or all macros may be disabled. However, if we removed the password all together, the file can be opened in Excel 2013 without any issues. We do NOT want to have the file without the password so any
help is appreciated.
Thank you in advance.

Hi,
Do you have the latest update of 2013, there has been changes in dec 2014 that causes problems with VBA code.
Maybe that is also the reason here. See below link for more information.
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2014/12/11/forms-controls-stop-working-after-december-2014-updates-.aspx
Regards,
Reshma
Please Vote as Helpful if an answer is helpful and/or Please mark Proposed as Answer or Mark As Answer when question is answered

Unable to open raw files in lightroom from my nikon d5300

I have recently bought a nikon d5300 camera and cannot open any raw files using elements 12 or lightroom 5.3 which are both recommended for the new camera and its raw formats?

What exactly do you mean, please describe in detail, "cannot open any raw files". What steps are you trying in Lightroom, and what happens when you try those steps in Lightroom, and what is the error message.
Did you use any Nikon software at any time in the handling of these photos, before you try to open them in Photoshop Elements, or import them into Lightroom?

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

Unable to open project file - from one 6.0.2 to another 6.0.3.

Hi
We're at a time-critical stage of finishing our movie, and we need to get the color-corrected sequence from the post-house to our studio so we can make some picture changes and get it back to them. They can open the project file just fine (it was created in 6.0.2, but they since updated their system to 6.0.3), and we have just updated to 6.0.3 also. Quicktime is 7.4.5 (which matches their version). However, they've FTP'd it to us, and we cannot open it here. FCP gives the error "Unable to open project file". It's not the "older version" message which I've seen before, it just ... fails to open it. Almost as if the file were corrupt. However, the post house can re-download the file from FTP and open it there, so this confuses me. I've also tried the file on a FCP 6.0 system (which I can't update because it's an Avid system locked to a certain version of Quicktime) and the same error message.
Would anyone be willing to test the file and see if they can, at least, open it?
Many thanks.
Matt

Have them zip the file... Project files via email often don't open if they aren't zipped..
Jerry

Unable to open project files from 2001

I have a .fcp file and a .fcm file from 2001 that I am unable to get FCP 5 to recognize. For the .fcp it gives the error "Unable to open project file." For the .fcm it says "File error: Wrong type." I don't remember which version of FCP they were made on (perhaps even FCP 1?) but I'm really worried about not being able to open them anymore. Any suggestions, please?

Oh no! I am really in trouble, because this is a very complex project with about a million cuts. What you're basically saying is I should just start over? What other options to I have? There must be some way to convert an old FCP file, no?

HT3678 If I download a .mov file from gmail, I am not able to open the file. I reinstalled QuickTime 7.6.6, still unable to open the file. If I download the same file from another mail server I have no trouble. What is gmail doing to my file?

If I download a .mov file from gmail, I am not able to open the file. I reinstalled QuickTime 7.6.6, still unable to open the file. If I download the same file from another mail server I have no trouble. What is gmail doing to my file?

Also i have reinstalled the reader9 two times and tried with reader8 also but in both the cases same problem.
it would be gr8 help if someone can help.

KUP-04063: unable to open log file.. (while selecting from External table)

Hi
I am trying to craete an external table and then select the data from the table. However I am getting error while trying to select the data from external table.
SQL>CREATE OR REPLACE DIRECTORY my_dir as 'C:\arun';
Directory created.
SQL>GRANT ALL ON DIRECTORY my_dir TO PUBLIC;
Grant succeeded.
SQL>DROP TABLE proj_checklists_external;
Table dropped.
SQL>CREATE TABLE proj_checklists_external
2 ( checklist_submission_id NUMBER
3 ,Lead_reviewer_name VARCHAR2(30)
4 ,Lead_reviewer_corp_id VARCHAR2(10)
5 ,creation_date VARCHAR2(10)
6 ,submitted_dater VARCHAR2(10)
7 ,approved_date VARCHAR2(10)
8 ,status VARCHAR2(50)
9 )
10 ORGANIZATION EXTERNAL
11 (
12 TYPE ORACLE_LOADER
13 DEFAULT DIRECTORY my_dir
14 ACCESS PARAMETERS
15 (
16 RECORDS DELIMITED BY NEWLINE
17 FIELDS TERMINATED BY ','
18 )
19 LOCATION ('Book1.txt')
20 )
21 PARALLEL 5
22 REJECT LIMIT 200;
Table created.
SQL>SELECT * FROM proj_checklists_external;
SELECT * FROM proj_checklists_external
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: unable to open log file PROJ_CHECKLISTS_EXTERNAL_28484.log
OS error No such file or directory
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
I craeted an file PROJ_CHECKLISTS_EXTERNAL_28484.log also in C:\arun and then tried to select but still got same error.
Any idea how to overcome this error.
Regards
Arun

here you go:
SQL> CREATE OR REPLACE DIRECTORY GRATIS_LOAD as 'D:\AdvSourceData\Membership\';
Directory created
SQL> GRANT ALL ON DIRECTORY GRATIS_LOAD to ADVROLE;
Grant succeeded
SQL>
SQL> DROP TABLE MEMB_BATCH_LOAD_ID;
Table dropped
SQL> CREATE TABLE MEMB_BATCH_LOAD_ID (
2 ID_NUMBER VARCHAR2(10),
3 STATUS CHAR(1)
4 )
5 ORGANIZATION EXTERNAL
6 ( TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY GRATIS_LOAD
8 ACCESS PARAMETERS
9 ( records delimited by NEWLINE
10 fields (
11 ID_NUMBER POSITION (1:10) CHAR,
12 STATUS POSITION (11:1) CHAR
13 )
14 )
15 LOCATION
16 ( 'GRATISID.TXT'
17 )
18 );
Table created
SQL> select * from memb_batch_load_id;
select * from memb_batch_load_id
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: unable to open log file MEMB_BATCH_LOAD_ID_1388_5552.log
OS error The system cannot find the file specified.
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
SQL>

Unable to open PDF files from Fileserver Content Source using Browser

The situation is this :
A content source was created to search a fileserver
Search facility finds the files using the browser
Able to open MS Office files from the fileserver
Able to open PDF files that are in the Sharepoint Portal
Unable to open PDF files from the Fileserver
Currently using Sharepoint 2010. PDF Filter is installed and configured on the Sharepoint Server
Your assistance is always greatly appreciated.
Have a great day.
NRH

Hello Nate,
I have the necessary access to the folder.
The content source addresses are
\\172.25.136.53\KDrive\Home\Company\DAILYREP
\\172.25.136.53\KDrive\Home\Company\TRINMAR
\\172.25.136.53\KDrive\Process Safety Management
NRH

Upgraded from Canon 5D Mark II to the new Mark III - unable to open RAW files

Have upgraded from a Canon 5D Mark II to the new Mark III - unable to open RAW files from the Mark III

Canon 5D Mark III is not a supported camera as of now.
For details, Check Camera Raw plug-in | Supported cameras

Since last update, unable to open PDF files from either banking site. The other (IE) works fine but I hate IE. I deleted newer versions and went back to older releases. No help, same thing. Checked settings in options. That is ok. What's up?

Unable to open PDF files from my banking statements.

I think almost every dev is on arch-general, so that is the place to contact the group in general. Specific points can probably be emailed to the dev involved, if one is identifiable and if the bug tracker is not a better place (bug reports to my email get ignored).
I think the whole problem here is that there is really no dev in charge of that package. So your emails were probably seen then skipped over by all devs thinking not my problem... (I know that is true for me). Then Andrea noticed an "orphan" package that needed updated and went ahead with it without connecting it to your previous emails, which is unfortunate.
Now our maintainer backend is fixed, hopefully we can get all the orphan packages adopted out, or at least know if we need to bring on new people to maintain them. That way, there should always be someone who information about specific packages should be sent to.

I am unable to open some file because there is "encrypt contents to secure data" attribute applied by me before format my pc

Please see this chat session
Shayne M:
3:03:06 PM
Hi, thanks for visiting Answer Desk! I'm Shayne M.
You:
3:03:24 PM
Hi! I am Surendra from Lucknow Inida.
Shayne M:
3:03:37 PM
Hello
How can I help you?
You:
3:05:35 PM
Madam my some file in green color and i am unable to open these file because there is encryption attribute applied by me some time before and now i am unable to remove encryption from my files
because today I format my system please help me
Shayne M:
3:06:01 PM
oh, sorry to hear that.
may I know what type of files is that?
is that a word file?
You:
3:07:37 PM
many type files excel pdf doc docs and many more some programs also encrypted, and some folder also encrypted.
Shayne M:
3:07:48 PM
I see.
may I know what version of windows do you have?
You:
3:08:53 PM
Window 7 Professional
Shayne M:
3:09:16 PM
I see, thanks.
Click here (Link Silverlight)
you can try that link
Dial toll-free: 1800 102 1100 or 1800 111 100
Direct dial: +91 80 40103000
or dial that number for Microsoft India.
any other questions for me?
You:
3:10:34 PM
I am downloading silverlight.exe please wait
Shayne M:
3:10:41 PM
okay.
please try the link I gave you, if that will not work, feel free to contact us back so we can look for any other options for you,
you may also contact the number I gave you for Microsoft India support.
You:
3:13:40 PM
program install successfully what to do now ?
Shayne M:
3:13:59 PM
please follow the intructions I gave you.
it's on the link.
You:
3:14:45 PM
please repeat
Shayne M:
3:14:53 PM
Click here
(Link Silverlight)
there you go,
if that will not work,
feel free to contact us back
You:
3:15:11 PM
please wait i am reading
Shayne M:
3:15:23 PM
Dial toll-free: 1800 102 1100 or 1800 111 100
Direct dial: +91 80 40103000
or you may dial that number/
just take your time reading that. I cannot stay any longer Surendra.
anything else?
You:
3:17:18 PM
I am unable to remove attribute till now
Shayne M:
3:17:28 PM
alright,
you may contact the number I gave you for further assistance.
Dial toll-free: 1800 102 1100 or 1800 111 100
Direct dial: +91 80 40103000
that's Microsoft for India.
You:
3:18:43 PM
ok
Shayne M:
3:18:43 PM
anything else?
Thank you for contacting Microsoft Answer Desk, you Have a Great Day,Take care.
You:
3:19:04 PM
thank you
Shayne M:
3:19:10 PM
you're welcome.
Your Answer Tech Shayne M has ended your chat session. Thanks for visiting Answer Desk.

Hey guys,
So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
Aaisha

Unable to open .xslm file in Excel from Document Library

Similar Messages

Maybe you are looking for