Unable to openlog in page in application window

i am unable to open login page
iam facing the following error.please any one helpme.
afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time

Hi,
select status from v$datafile where file#=30;

Similar Messages

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have

Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have?

Hello, hanliefromzaf.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iTunes for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Cheers,
Jason H.

Unable to surf some pages in windows 7

hi friends
current am using windows 7 64 bit, but from last two month am unable to open some pages on my G550. pages like
apple.com and unable to login in itunes store.
Am having 1 mbps internet connection
so what should i do

Try this:
1) Start
2) Run
3) ipconfig /flushdns
4) Start
5) Run
6) ipconfig /registerdns
Sometimes works when the DNS cache is no longer valid.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Unexpected error: unable to find item name at page or application level

HI!
I upgrade my application from apex 3.0 to 3.1
I created a new page.
When trying to insert a new row, on clicking "create", the page displays the error :
Unexpected error: unable to find item name at page or application level
This error didn't appear in apex 3.0
What this error can be? Is it a bug of APEX 3.1?
Thank you!

I have seen this in combination with javascript. Recreating the item helped.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Windows SharePoint Services-compatible HTML editor

Dear All,
I am frequently getting following error message on aspx pages on my SharePoint 2007 environment
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Windows SharePoint Services-compatible HTML editor such as Microsoft Office SharePoint Designer.
If the problem persists, contact your Web server administrator.
Upon refreshing and restarting the browser several times, this error message temporarily gone and everything becomes fine. But after some time same error message starts appearing again. Also I have noticed that this error message also appears
while working with SharePoint Designer 2007.Any clues how to resolve this issue ?
Any help in this regard will be greatly appreciated.
Muhammad Tariq khan

Hi All,
As I regenerated the problem (Unable to display this Web Part... ) from the faulty
user. I experience following error message in the ULS logs...
Error while executing web part: System.Data.SqlClient.SqlException: Invalid object name 't5_sco'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler,
SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()     at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)     at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior,
Boolean returnStream, Boolean async)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)     at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)     at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
behavior)     at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior)     at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean& bSucceed)
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback(String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback,
ISPDataCallback pSchemaCallback)     at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback(String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter
pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pSchemaCallback)     at Microsoft.SharePoint.SPListItemCollection.EnsureListItemsData()     at Microsoft.SharePoint.SPListItemCollection.get_Count()
at Microsoft.SharePoint.WebControls.SPDataSourceView.ConvertToIEnumerableWrappers(SPBaseCollection items, Int32 firstRow, Int32 rowCount, String[] fieldList)     at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteSelect(DataSourceSelectArguments
selectArguments)     at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)     at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigatorInternal()
at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator()     at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator(IDataSource datasource, Boolean originalData)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXPathNavigator(String
viewPath)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform()
What does this error message mean ?
Muhammad Tariq khan

Unable to connect wifi printer Envy 4500 - Unable to print test page and windows office file

Scan doctor suggest the software installation.
The HP software don't completed the connection of the printer.
I tried to connec the printer from the control panel and the printer is now connected: i cannot print from microsoft office file or from the test page of the printer, but i can print from acrobat or any other program.
Help me please.
Thk
ps: i have tried to reinstall software without Antivirus and with the fierewall in off but nothing change. I have already tried to remove hp software and reinstall driver but nothing change.

Hello @Emilio66,
Welcome to the HP Support Forums!
I understand that you're experiencing issues when trying to print from Microsoft Office and Test Pages from your Windows 8.1 computer to your HP ENVY 4500 e-All-in-One Printer. However, you are able to print from all other programs from your computer to your printer. I would like to assist you today with resolving this printing issue.
Recently Microsoft has released a Hot Fix to correct 'Offline' or 'Partial Printing' issues within their latest Windows 8 and Windows 8.1 Operating Systems as they recognize this as an issue within their Operating System. The issue occurs when you have a networked printer and a corruption with the WSD (network) port on the Windows Operating System. This issue appears to affect a variety of networked makes and models of printers. Therefore, I am going to have you run the Hot Fix to correct the network printing issue. Please click here to install the Hot Fix. Once the website opens select the button for Hotfix Download Available. Please follow any onscreen prompts to install the fix. Once the fix is installed you should have no issues printing to your printer.
If the printing issue persists, can I please have you click here to download and run the HP Print and Scan Doctor Tool. This Tool will run on your computer and 'fix printing' issues for you. Should any driver, software, or connection conflicts be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you. Once the Tool has completed please test printing again.
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Web page hosting on Windows 7

I am using Home Control Assistant to control lights in my house. HCA uses a web page to allow other computers in the house to control devices. I am unable to access the webpages since installing Windows 7. I have enabled the port 9955. I am unable to localhost:9955 and retrieve the webpage either. I have tried turning the windows 7 firewall off.
Any ideas on what I missed.
Thanks
Duane

Windows 7 come with a very handy application/tool set called
Internet
Information services 7.5, which allowed you to use any PC as a server for your newly created website. Hosting
your own website doesn't
have to cost a monthly fee or
required a lot of technical knowledge to
set up. If you just need to host a small website that will only have a few visitors, you can turn your Windows PC into. Hosting
helps us in designing all the web application activities. If
want more
information, then visit myasp.net.
Here you found many more information’s......

When I view application windows, but then cancel from this view I am moved to another open window from the application on a different desktop space. How can I prevent this from happening?

Hi Everyone!
I'm new to Mac, and I'm a bit unsure of how to handle a problem I'm having with application windows.
Here's the scenario:
On one space I have a bunch of PDF's open in Preview next to the document I am working on. On another space, I might have an unrelated PDF open and an image, also open in Preview. Now, say I use the Application Windows button to view all my open PDF's on the first space, but then discover I haven't got the PDF open, so I need to open in in finder. The moment I quit out of the Application Windows view I am transported to another desktop containing an open Preview window! This happens with other applications too, like if I trigger application windows on pages instead of preview and need to cancel, I get transported off to some other open pages document.
This is insanely infuriating, how can I stop it!
Thanks for your time.

See Recover your iTunes library from your iPod or iOS device.
tt2

Application window not working, must go to dock

I am having a strange thing happen both on my mac at home and my one at work. Sometimes when I click on the application window, it will not come forward. I have to go to the dock and click on it to select it. This happens quite a bit in the print dialog.. but happens in a lot of other applications.

I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
Still hoping someone out there can help me.
thanks,
anne

Open that jspx page in new window using commandLink

Hi All,
I'm working on adf application.I'm using jdeveloper 11.1.1.5 version.I want to get the attribute value of current row and pass it to jspx page.And i want to open that jspx page in new window.I tried like following:
<af:column id="resId1c7" align="center" width="50">
<af:commandLink actionListener="#{bindings.setCurrentRowWithKeyValue.execute}"
text="MSG-ID"
disabled="#{!bindings.setCurrentRowWithKeyValue.enabled}"
id="cl1"
action="dialog:Confirm" windowHeight="600"
windowWidth="800" useWindow="true"
partialSubmit="true"/>
</af:column>
And in my faces-config.xml i add the navigation rule like this.
<navigation-rule>
<navigation-case>
<from-outcome>dialog:Confirm</from-outcome>
<to-view-id>/AuditLogInfo.jspx</to-view-id>
</navigation-case>
</navigation-rule>
Here my problem is i want to get the result jspx page in new window.But im not able to do it.Please help me how can i do this?
Thanks in advance!

Thq very much.It is working fine.
I added the command link in my home page.When i'm clicking on that link im able to get my child.jspx page in new window.But I have added the login page to my adf application.If i run the login page im able to get my home page.But now i'm not able to get my child.jspx page when i'm clicking on command link.How can i resolve this.Please give me your suggestions.
Thnks in advance.

Unable to print full page to 1 specific printer while other computers can.

I have 1 computer (Windows 7, 64 bit) which is unable to print full page to a Xerox Phaser 7760GX. I have other computers (Windows 7 64 bit and Mac OSX Mavericks) which are able to print perfectly fine to the same printer. This only happens in Adobe Acrobat XI Pro, not in other software I have tested. The same PDF's also print to other printers without problem.
So far I have:
Re-installed drivers (including the Xerox Generic Drivers)
Set it to print as image (which makes it full screen, but also greyscale)
What happens when I try to print normally, is assume the page is portrait. It will print it landscape, on the right side of the page (so it takes up half the page). It will also send out a blank page after it. Has anyon else experienced this and come up with a different solution?

Glad you solved your problem. On Aperture 3.02 I find no expansion slider. Where is it in 3.01?

Unable to create a file in Application Server using OPEN DATASET stattement.

I am unable to create a file in Application Server using the following statement.
OPEN DATASET filename FOR OUTPUT
IN TEXT MODE ENCODING DEFAULT
MESSAGE msg.
The message I'm getting is "Permission Denied". I have checked authorisation using SU53 which says "The last authorization check was successful". Please help.

You can use following code to capture the error.
TRY.
      OPEN DATASET filename FOR OUTPUT IN BINARY MODE MESSAGE V_MSG.
      CATCH CX_ROOT
      INTO EXCEPTION.
      CALL METHOD O_EXCEPTION ->IF_MESSAGE~GET_TEXT
        RECEIVING
        RESULT = V_MSG.
      MESSAGE v_msg
      TYPE 'E'.
ENDTRY.
You can capture error in v_msg.
Following are the exceptions for the same:
Exceptions
Catchable Exceptions
CX_SY_FILE_OPEN
Cause: The file is already open.
Runtime Error: DATASET_REOPEN
CX_SY_CODEPAGE_CONVERTER_INIT
Cause: The desired conversion is not supported. (Due to specification of invalid code page or of language not supported in the conversion, with SET LOCALE LANGUAGE.)
Runtime Error: CONVT_CODEPAGE_INIT
CX_SY_CONVERSION_CODEPAGE
Cause: Internal error in the conversion.
Runtime Error: CONVT_CODEPAGE
CX_SY_FILE_AUTHORITY
Cause: No authorization for access to file
Runtime Error: OPEN_DATASET_NO_AUTHORITY
Cause: Authorization for access to this file is missing in OPEN DATASET with addition FILTER.
Runtime Error: OPEN_PIPE_NO_AUTHORITY
CX_SY_PIPES_NOT_SUPPORTED
Cause: The operating system does not support pipes.
Runtime Error: DATASET_NO_PIPE
CX_SY_TOO_MANY_FILES
Cause: Maximum number of open files exceeded.
Runtime Error: DATASET_TOO_MANY_FILES   Non-Catchable Exceptions
Cause: An attempt was made to open a pipe that is already open.
Runtime Error: DATASET_PIPE_POSITION
Hope that will help you.
Please reward if useful.

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Unable to download iTunes on my second windows computer (64 bit). I got it fine on my first one. After downloading the program and installing it, I keep getting an error message:Apple Mobile Device Failed to Start. This happens wven when my IPhone 5c is t

I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Unable to openlog in page in application window

Similar Messages

Maybe you are looking for