Unable to pair ipad 3 and apple wireless keyboard

I own an Ipad 3 but am unable to pair it with my apple wireless keyboard. I bought it in Sept 2012 same day with keyboard. Both paired without issues daily. Once I downloaded the recent ios 6 update i've been unable to connect my keyboard with my ipad. The apple keyboard still pairs with my macbook pro and my iphone 4.

Lrlandés-
I never tried my function keys before, but most are working under iOS 4.3.5. I get no response for F3, F4, F5 or F6. I suspect those may be App-specific.
What model keyboard is yours? Mine is MC184LL/A, according to the box it came in.
Fred

Similar Messages

HT3917 I am unable to pair my new apple wireless keyboard with my new i-pad. It keeps says not paired and will not pair. I do not know what to do now. Help.

I am unable to pair my new apple wireless keyboard with my new i-pad. It keeps saying not paired. What can I do to pair it?

Turn off keyboard. (make sure its' off, mabye even take out the batts since people always screw this up).
Turn off iPad as well..
Turn on iPad and quicky power up keyboard.
Now pair it.

Ipad and apple wireless keyboard interferance

I am getting some weird behavior on my bluetooth apple keyboard in relation to my iPad. I can't tell what is causing the problem. I am halfway through typing something and it just stop working. The strange behavior is that I see the actual keyboard pop up on the screen. Then after waiting a few seconds it starts working again and the on ipad keyboard is still visible. Why are the two running in parallel? Doesn't the use of a wireless keyboard overwrite the need for an onscreen keyboard? Thoughts?

Thats what I was thinking so I checked the screw and it seemed a bit loose. It might have been a tiny bit loose and so it was dropping contact. Since tightening the screw the problems seems to have gone away. Hopefully this has fixed the problem. If I see it again I may change out the batteries.

Have iPad Air and Apple Wireless Keyboard. Can I access emoji from the wireless keyboard?

RE: iPad Air and Apple Wireless Keyboard
HI, I have an iPad Air paired with an Apple Wireless Keyboard. Can I access emoji from the wireless keyboard?
Thanks for any help on this subject!

Eureka! I kept searching and found the solution. So, if anyone wants to know here is the solution: press fn and the up arrow on F Keys (top) row (it's the one all way to the right. The iPad keyboard will then pop up on the iPad and from there you can access the emoji keyboard.

How do i get my iphone5 to pair with my apple wireless keyboard?

how do i get my iphone5 to pair with my apple wireless keyboard?

turn on bluetooth on you iPhone (Settings > Bluetooth > On) on you iMac click the bluetooth icon in the status bar or go to System Preferences (System Preferences > Bluetooth > Set to 'ON' and 'Discoverable') then either on you iPhone or iMac, search and select the other device and choose to pair them.
That's basically it! Hope it helps

Magic Mouse and Apple Wireless Keyboard with Bootcamp and Win XP Pro 32-bit

Does the Apple Magic Mouse and Apple Wireless Keyboard work with Boot Camp running Windows XP Pro (32-Bit)... I read something leading me to believe there maybe a problem and you need to use a wired USB mouse/Keyboard.
Is this true?

Apple Wireless Keyboard is able to work in Boot Camp via Window XP Pro, it's good enough.
but the Magic Mouse, it's not able to work completely in Window XP Pro,
it's just work like a normal bluetooth wireless mouse,
all the Multi-Touch features like scroll, rotate, swipe, pinch and tap click are not gonna work,
even you are configure via the snow leopard, so please be reconsider.
Message was edited by: BenNovello

IPad 2 and Apple wireless keyboard (function keys not working)...

Hello all,
I just purchased the Apple wireless keyboard to use with an iPad 2. It pairs fine and I can type away but none of the function keys work (brightness, volume etc). Anyone have any ideas? I think these worked fine on earlier keyboard models.
All help gratefully accepted,
Irlandés
P.S. I'm running iOS 4.3.4 (8K2)

Lrlandés-
I never tried my function keys before, but most are working under iOS 4.3.5. I get no response for F3, F4, F5 or F6. I suspect those may be App-specific.
What model keyboard is yours? Mine is MC184LL/A, according to the box it came in.
Fred

IPad rename Apple wireless keyboard

We have several Apple wireless keyboards which were originally paried with another name. When paried to my computer I was able to use the gear icon on Bluetooth to rename the keyboard to the name I wanted. Unfortunately the old name comes up on my iPad (likely because that is where I first tried to pair it) How to rename it on my iPad?

go to bluetooth settings an ignore the keyboard and connect your keyboard with your iPad again

1st generation MacBook not pairing/connecting with Apple Wireless Keyboard

I just purchased an Apple Wireless Keyboard to use with my iPhone and my 1st generation MacBook.
I managed to pair/connect my keyboard with iPhone on my first try.
So far, however, I have not been able to pair or connect my keyboard with my MacBook.
Does anyone have a solution to this problem?
Thanks.

Hi Stefan,
Thanks for your help. Indeed, I followed the instructions for pairing and connecting the keyboard last night. I shut down my computer last night with the idea that a restart this morning might be helpful. Per your message, I attempted to follow the instructions again a moment ago, with no success.
Bluetooth on my MacBook and on my keyboard are both on. My MacBook is discoverable. Any thoughts about what the glitch might be?
Thanks again!
Scott

Windows Vista/ Boot Camp and Apple wireless keyboard/mouse

Could someone please outline the steps needed to make the apple wireless mouse and keyboard work with Windows Vista on the Mac. It was working fine before I installed the Mac drivers, but now nothing. Whats worse is my computer boots to windows automatically now so I can't use it at present!
All help very gratefully received.
Many thanks
Dominic

You cannot use a keyboard or any other peripheral with the tv, I'm afraid. Think of it more like a giant ipod than a little mini in that respect.

"F" Keys on iPad and Apple Bluetooth Keyboard

Anybody know how to get the "F" Keys on my Apple bluetooth keyboard to work with my iPad? I need to use F1, F2, etc. Please Help.

You might notice that keyboards sold exclusively for use with the iPad do not include function keys. That is because the iPad does not currently offer any system-wide method for assigning actions to those keys. I suppose that individual apps might be able to look for function key presses and have actions assigned to them, but since most apps are designed to work with the iPad's built-in input tools, I doubt that many – or any – apps implement this.

Problems with Magic Mouse and Apple Wireless Keyboard battery levels 10.6.7

Last day, when I update to 10.6.7, Mac tells me that the batteries of the mouse and the keyboard is 18850648374% and in the Preferences panel always tell me 100%, but the other day Mac tells me that the keyboard had no battery and that's not true
How can I fix it?
This is driving me crazy!
Thank you!
P.D: sorry for my bad English, I'm Spanish...
Message was edited by: Alfonso Garcia
Message was edited by: Alfonso Garcia

Getting Bluetooth set up initially in Bootcamp is a bit of a hit and miss affair in my experience, but persistence pays off, and connection is reliable. I gave up with the keyboard on my Mac Pro at one stage, tried again a few days later and it worked.
How did you do it?
Persistence and repetition, reading lots of threads and getting snippets from various sources, can't recall any silver bullets.
Have you searched this forum, there are a LOT of posts on the subject.
Links please? I can't find any.
If you type "bluetooth" in the search box while at the top level of the Bootcamp section you will get six pages of hits. Here are just a few, not necessarily the best or a complete list or in any particular order, but they contain relevant info.
I can't remember the detail now but one of the key steps for me was launching the bluetooth "service" mentioned in some of these links. Initially option wasn't appearing at all. Also mine (and others) seems to need a single click after boot to be activated. If you try and move it before a click it won't respond so you might think it wasn't working.
BTW I am assuming you have successfully installed the Boot Camp 3.1 drivers?
http://discussions.apple.com/thread.jspa?threadID=2221427&start=0&tstart=0
http://discussions.apple.com/message.jspa?messageID=10943844#10943844
http://discussions.apple.com/thread.jspa?messageID=10669525&#10669525
http://discussions.apple.com/thread.jspa?threadID=2057008&tstart=0
http://discussions.apple.com/thread.jspa?messageID=10948512&#10948512
http://discussions.apple.com/thread.jspa?messageID=10935130&#10935130
I am afraid at this point I stopped trawling through looking for the most relevant ones so the above is incomplete.

I can't seem to pair my new apple wireless keyboard to my iphone 3gs despite following the instructions in the manual. My keyboard is a new model so it should be compatible.I have read several discussion pieces but no real answers. thanks Frank

this is a question?

Hello Mik:
You cannot register a KB. Apple does not keep a database of peripheral devices.
I would question the store about the unwrapped batteries.... I would suspect that the device was returned by someone else.
Barry

Apple wireless keyboard on XP with D-Link DBT-120

It was effortless to pair my aluminum Apple wireless keyboard with Windows XP SP2 using the D-Link DBT-120 (Ver. C1) Bluetooth USB dongle. It paired just like any Bluetooth keyboard and works well when it's connected.
The XP box the keyboard is paired with never sleeps, but when I come in in the morning the keyboard doesn't work. I always have to delete it from the Bluetooth Manager and re-pair it. It seems that the long overnight period of inactivity causes the connection to fail, even though my machine doesn't sleep or get rebooted.
This same keyboard stayed paired with the same PC for weeks when I was using a Logitech Bluetooth dongle (WIDCOMM stack), so I'm guessing this is a D-Link issue or perhaps a quirk of the Toshiba Bluetooth stack. I even put fresh batteries in the keyboard to make sure it wasn't just starting to run low on power.
Does anyone have any idea why a long period of inactivity (with no sleep or reboots) might cause Bluetooth connection problems between Apple's keyboard and XP/DBT-120?

I tried to do what you described in this post but it does NOT work. I have a D-Link DBT-122 and Win XP running on a PC and the wireless keyboard.
I type the code in the grey field with an USB keyboard and then I do the same with the wireless one and press "Enter" but it does NOT work.
Did you miss a step in your description?

Two Apple Wireless keyboards (at 2 locations) vs 1 G4 PoowerBook

I like using my Apple Wireless keyboard with my Powerbook G4 which stands on an iCurve at work. I make heavy use of the extra keys.
At the moment I take the wireless keyboard home with the PowerBook but this is getting tiresome. I am considering buying a second wireless keyboard.
Before I do my question is this:
Can I Pair a second Apple Wireless Keyboard (which stays at Home) and maintain the office wireless keyboard (which stays at work) pairing too?
NB I don't want to have to delete any pairing everytime I go home or come to my place of work. I want seemless 'finding' of the keyboard it finds at boot time.
The two keyboards will never exist in the same location, in fact they are 50 miles apart.
I have searched through the discussions but could not find this situation discussed.
Thanks.
PowerBook G4 1.66GHz Mac OS X (10.4.5) Apple Wireless Keyboard

Hi, G.Cactus!
I've participated in a number of threads about this issue, with fairly consistent — albeit not unanimous — results. Unfortunately, many folks never post back to confirm the results of their experience; I'm guessing this is because the "answer" is unsatisfying, and ~counter-intuitive. (More on this in a minute. [1])
How? Apple is pretty unambiguous on the subject in KnowledgeBase Article 86471 — Bluetooth: How to Delete a Paired Device —"Note: Some Bluetooth devices (such as keyboards and mice) are designed to be paired and used with one computer at a time. If you pair your keyboard or mouse with another computer, delete the pairing with the original computer first. This will ensure that the device only attempts to operate with the intended computer."Logically, the converse should also be true.
Given this, your"NB I don't want to have to delete any pairing everytime I go home or come to my place of work. I want seemless 'finding' of the keyboard it finds at boot time."...appears to be too tall an order. Making your keyboard a "Favorite" enhances "seamlessness" — but multiple pairings appear to require the "extra step" — for input devices, anyway...
A number of folks have reported that this (deleting pairing/re-pairing) worked for them — although they consider it annoying. C'est la vie — if the "delete pairing" and "re-pairing" process takes more than ~a minute or two, something else is awry...
In ~10 months of watching this & a few other Bluetooth forums, I can only recall one poster who reported success without having to delete pairing. See [ Richard Kroc, "Re: Can you pair 1 mouse to 2 computers?" Jan 28, 2006 9:45 pm ], if you're interested.
You can peruse other threads from this forum on the topic by using — search terms such as < delete +(pair OR pairing OR paired) > — along with delimiters of your choice (such as (+keyboard !mouse)...
[1] Why? "Unsatisfying" is apparent.
"Counter-intuitive" (imo) because one of Bluetooth's strong points is that it facilitates inter-operability across a range of Bluetooth-enabled devices — even allowing one device to work ~concurrently across multiple "piconets" (Bluetooth™ Personal Area Networks of up to 1 "master" and 7 "slave" devices each). But it appears that HID (Human Interface Devices, "geekspeak" for "input devices" such as mice & keyboards) are in a different category among Bluetooth-enabled device in this regard. Intentionally.
The Bluetooth technology defines numerous "Profiles" through which Bluetooth-enabled devices of different kinds can communicate, using standardized protocols.
If a "requirement" for such redundant "re-pairing" were the case for PDAs, phones, headsets, etc.,
my guess is that the Bluetooth SIG would consider this an intolerable limitation.
As defined in the latter document cited ("Profiles Overview"), the HID profile within the core Bluetooth specification was designed using "the USB definition of a HID device in order to leverage the existing class drivers for HID devices" — i.e., in an effort toward a ~universal approach among similar products. But there are clearly differences once the cables are removed.
I've read through the available HID specification ["Human Interface Design Profile (HID)," May 2003; available from here] — as best I can as a layperson. The "limitation" is intentional, and ~complex. I think I understand the rationale for it, at least in part and in general terms. Apparently, two factors control in this regard for HID:
• Limitations on discoverability/non-discoverability to facilitate ~rapid connection
• The need for rigorous support of authentication/bonding/encryption for HID "due to the extraordinary
sensitivity of the information that commonly travels from these devices" compared to other
Bluetooth profiles.
Note also that the pairing and authentication/encryption processes involve very complex communication protocols that are defined specifically wrt to each piconet. My guess is that this represents a practical boundary — at least at the moment. Depending on the evolution of Bluetooth technology, growing use of multiple "concurrent" piconets in some environments may motivate changes.
I'd be interested to hear more about your experience and views on this.
I realize this isn't the answer you wanted to hear, but...
HTH!
Dean
I edited this message... But probably not enough!
[1,957 ⊥ 3,340]

Unable to pair ipad 3 and apple wireless keyboard

Similar Messages

Maybe you are looking for