Unable to pair my Plantronics Voyager Legend to My iPhone 4s using ios 6.1.1

i have problem pairing my Plantronics Voyager Legend with my iPhone 4s using ios 6.1.1
anyone can help me?

If you have Samsung Android phones, get Viber or Whatsapp, it feels just like texting but it's a free messaging/chat service instead.
But talk to your provider, they should be able to identify if there's any international restrictions active on the accounts.

Similar Messages

  • Ipad 2 blue tooth not pairing with plantronics voyager legend

    Ipad 2 is not pairing with plantronics Voyager Legend (blue thooh)  but this device (blue thooh) is pairing working good with my iphone 4s

    http://www.plantronics.com/us/support/kb/detail.jsp?vfurl=/articles/en_US/Troubl eshooting/Compatibility-statement-in-regards-to-the-Apple-iphone-5-and-the-Voyag er-Legend&retURL=%2Fapex%2FknowledgeSearch&region=us&p=&c=All&k=Voyager%2BLegend &t=All&lang=en_US&popup=false&c=All

  • Plantronics Voyager Legend and my iPhone 4

    sometimes my audio will switch from my Plantronics blue tooth to just coming out of the iphone.
    i will push the audio button and sometimes it will show the blue tooth still checked, other times iPhone will be checked.
    Also, there are times I push the button on my Voyager, hear the tone, and wait for voice control to be activated on my iPhone, but it doesn't happen.
    anybody else seen this?   why does it just switch back and forth, and why can't i consistently invoke voice control via my Voyager?  I recently updated the firmware on my Voyager and am still seeing the same problems.

    Hi wbnelso1, 
    Welcome to the Apple Support Communities!
    I undress and that it can be very frustrating when your car Bluetooth connection is not working as you would expect. In your situation, I would recommend using the troubleshooting steps outlined in the attached article.
    iOS: Troubleshooting car stereo connections
    Have a great day, 
    Joe

  • Plantronics voyager legend not pairing to iPhone 6

    My iPhone 6 does not recognize my Plantronics Voyager Legend headset. It worked fine on my iPhone 5 with OS 8.02.  Any ideas how to connect the two?

    This worked for me:
    To Pair Voyager Legend to a Different Phone or Re-Pair to the Same Phone:
    Turn the headset on. Slide the power switch to the 'on' position showing green.
    Using voice commands. Tap the Voice button on your Voyager Legend and say “Pair mode,” or  Press and hold the Call button on your Voyager Legend until you hear “Pairing”
    Turn on your phone’s Bluetooth feature. While the Voyager Legends LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.
    • iPhone Settings > General > Bluetooth > On
    • Android™ Smartphones Settings > Wireless & Networks > Bluetooth: On > Scan for devicesNOTE: Menus may vary by device
    Select Voyager Legend. Select “PLT_Legend" on your phone as a found device.  If your phone asks, enter four zeros (0000) for the passcode or simply accept the connection.
    Complete pairing process. Once successfully paired, LEDs on the Voyager Legend will stop flashing red/blue and you will hear “pairing successful.” from the headset.NOTE To enable caller name announcement, allow access to your contacts if your phone prompts you.Your phone should now be paired with the Plantronics Voyager Legend headset and ready for use.

  • Pair plantronics voyager legends

    Since upgrading to Yosemite on my MacBook Air I can no longer pair my Plantronics Voyager Legend bluetooth headset.
    I am able to connect to my iPhone6 (IOS 8).
    any suggestions?

    I should works since it supports the A2DP and AVRCP profiles which are also supported by the iPad. From the Plantronics site:
    Bluetooth Profiles Supported:
    Advanced Audio Distribution (A2DP)
    Audio/Video Remote Control (AVRCP)
    Hands-free v1.5 (HFP)
    Headset v1.1 (HSP)
    Secure Simple Pairing (SSP)
    http://plantronics.custhelp.com/cgi-bin/plantronics.cfg/php/enduser/stdadp.php?p_faqid=18753&p_created=1287701497&p_sid=m5Q1qdmk&p_accessibility=0&p_re direct=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9Njgs NjgmcF9wcm9kcz0mcF9jYXRzPSZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNo X25sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9UGxhbnRyb25pY3MgVm95YWdlciBQUk8!&p_li=&p_top view=1#productspecifications

  • Z30 connection to Plantronics Voyager Legend

    z30 won't connect to Earpiece 
    Shows up as "One" and says "Connont connect with One"
    Help!!!

    This worked for me:
    To Pair Voyager Legend to a Different Phone or Re-Pair to the Same Phone:
    Turn the headset on. Slide the power switch to the 'on' position showing green.
    Using voice commands. Tap the Voice button on your Voyager Legend and say “Pair mode,” or  Press and hold the Call button on your Voyager Legend until you hear “Pairing”
    Turn on your phone’s Bluetooth feature. While the Voyager Legends LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.
    • iPhone Settings > General > Bluetooth > On
    • Android™ Smartphones Settings > Wireless & Networks > Bluetooth: On > Scan for devicesNOTE: Menus may vary by device
    Select Voyager Legend. Select “PLT_Legend" on your phone as a found device.  If your phone asks, enter four zeros (0000) for the passcode or simply accept the connection.
    Complete pairing process. Once successfully paired, LEDs on the Voyager Legend will stop flashing red/blue and you will hear “pairing successful.” from the headset.NOTE To enable caller name announcement, allow access to your contacts if your phone prompts you.Your phone should now be paired with the Plantronics Voyager Legend headset and ready for use.

  • Just purchased an iPhone5 and can not pair my Plantronics Voyager Pro HD.  I can't get a flashing red/blue signal light.

    Just purchased an iPhone5 and can not pair my Plantronics Voyager Pro HD.  I can't get a flashing red/blue signal light.

    Did you press and hold the power button until the LED flashes alternating red/blue - you may have to hold it for quite a few seconds.  If the LED is not flashing red/blue, then it is not in pairing mode, and I would then call Plantronics tech support as their manual has nothing else to offer (I have the same headset, but I had no problem pairing with my iPhone 5 when I upgraded from my iPhone 4).
    In the USA, call 1-866-363-2583 for Plantronics.

  • How can I pair my plantronics PLT M20 to my iphone?  It just show the device and says not paired?

    I have been trying to pair my plantronics plt m29 to my iphone and all i get is not paired and shows now discoverable!! what else should I do? I followed the manufaturer directions and what someone said about turning off the iphone bluetooth then put the bluetooth in paring mode and turn on the phone bluetooth.

    it was-the lights were blinking from red to blue indicating that it was in paring mode. Still does not work! any other suggestions?  This is really frustrating- my last on paired just fine but they don't work so well when you wash them!!

  • Galaxy S5 and Plantronics Voyager Legend

    I got the Voyager Legend Headset when I preordered my S5. The headset worked perfect with my Motorola Razr maxx.
    Now with my S5 the headset auto answers every call as long as it is turned on and paired to the phone. Doesn't matter if it's on my ear or not it will auto answer the call.
    I took it into a Verizon store they weren't able to determine why. They even grabbed a brand new one off the shelf, paired it to my phone and it did the same thing. I contacted Plantronics whet through all of their troubleshooting and still no change. Plantroncis recommended exchanging it for a new one.
    Since I had seen another one already have this issue I thought I'd post this on this forum and see if anyone else is having this problem and see if anyone has found a solution.
    Things I've done.
    1) Installed the Plantronics app and checked all the settings
    2) Updated the firmware on the headset and checked the settings with the plantronics website
    3) Tried changing all the "answering and ending call" options on the S5
    4) Unpairing the headset and repairing it.
    5) Tried using the headset with the s5 in safe mode
    Anyone have any more thoughts or suggestions?

    I have recently just got the solution.
    Even Samsing wasn't able to help. After going through all the settings on the S5 I found the fix.
    Go to Settings --> Applications --> Call --> Call Accessories. There is an option for Automatic Answering. Uncheck that.
    The headset will now work perfectly.

  • Pairing a Plantronics Voyager Pro HD with Skype

    Has anyone sucessfully used the Plantronics Voyager Pro HD with Skype on the iPad 3?
    I can get it to work with audio such as music but the headset does not receive sound through the earpeice, only through the iPad speaker.
    Is there a setting for this I am missing?
    Thanks.

    Hey iacobdoc,
    Thanks for the question. The following articles provide the most relevant information to your issue:
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/HT1664
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Bluetooth disconnects, intermittent connectivity, or unable to find
    - Move your iOS device closer to the Bluetooth accessory.
    - Position your iOS device and Bluetooth accessory in direct line of sight of each other. For example, move the Bluetooth accessory and iOS device to the same side of your body.
    - Remove any case, stand, or other accessories from your iOS device and see if performance improves.
    - Check for sources of potential interference and move both the iOS device and the Bluetooth accessory away from other electronic devices.
    - Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
               - Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN, and APN settings.
    Thanks,
    Matt M.

  • Can I pair a plantronics voyager pro + with my droid charge?

    According to the instructions it does not work. According to the plantronics site the phone is not listed. Wanted to see what all you think before I buy another headset.
    Thanks!

    No it does not supply enough power for a macbook pro.

  • Plantronics Voyager Pro+  iPhone 6 pair disconnects

    Brand new iPhone 6, 128gb.  Version 8.1.3 (12B466).  Paired my Plantronics Voyager Pro+ with it, first bluetooth thing paired with the phone.  Paired easily.
    What happens is, if my phone is idle for some period of time and the screen shuts off, when I get an incoming call, I find that the headset is no longer connected, even though the iPhone shows the bluetooth connection is there.  If I wait for a connection to happen, it never will.  I have to turn off the headset, turn it back on, at which point it connects to the phone without incident.
    I have three other devices paired with the phone now.  I find that my car's bluetooth has a similar issue - it un-pairs and re-pairs from time to time.  (2014 Mercedes ML350).  My wife's iPhone 5 does NOT have the problem with the car.  This headset, and three others from other manufacturers, worked without drama with my previous phone, a Motorola Razr Maxx HD; my car had the same disconnect/reconnect problem from time to time, so I'm assuming THAT issue is the car's problem.
    I've seen a huge number of complaints back late last year, so many I can't wade through to see if there are still issues.  The solution was supposed to be v8.1 of iOS.  Clearly not for me.
    Is there some setting I should re-do?  Doing a full reset of the phone seems to be an absurd thing to do, given that this happened with a brand new clean phone and the first bluetooth item paired to it.  I STARTED with a re-set phone...
    Help appreciated.

    Hi Susabella, great to hear. However mine is Plantronics Voyager Pro (no Plus,not sure whether it's different) and my iPad 1 still can't find it (yes my Plantronics was in discoverable mode). I read the tread and it says iPad 1 doesn't support HFP 1.5.
    http://support.apple.com/kb/ht3647
    may be that's the reasons. Thks for you reply too.

  • Pairing iphone 3G with bluetooth Plantronics voyager PLT 510

    Hello! This is my problem: I have a bt. headset Plantronics voyager 510 which I want to use with my IPhone 3G. I make my headset discoverable, my phone recognize it, and with no code, I can use (talk). All time when bluetooth is "on" my IPhone keep searching devices, and is visible. Only option wich I have is to delete PLT 510 from phone memory. Can anyone tell me where I go wrong or what`s happening?

    I had a similar issue with my Jawbone Prime. The iPhone wouldn't recognize it. I paired my Plantronics 520 without any problem -- it works fine. I tried the Jawbone again and it hooked right up! I can now use either headset.
    Far-fetched, but if you could borrow another headset and give that a try, maybe the phone will cooperate with your Plantronics.

  • Voyager Legend will not work with my laptop

    I have an HP Pavilion dv6-3120us Entertainment Notebook PC with Windows 7(64-bit). I recently purchased a new bluetooth headset and am unable to get it to work with my laptop. The Previous headset was a Plantronics Voyager Pro which worked great with my laptop, all I had to do was pair it and that was that. My new headset is the Plantronics Voyager Legend and after pairing, it starts installing drivers and all but one are fine. 
            Bluetooth AV                                               Ready to use
            Bluetooth Remote Control                       Ready to use
            Bluetooth AV Remote Control Target   Ready to use
            Bluetooth Peripheral Device                   No Driver Found
            Bluetooth Hands-free                               Ready to use
    I've uninstalled, reinstalled several times and it didn't help, It shows that the device is paired, but doesn't reroute audio to the headset or the microphone. It shows in audio devices but says disconnected, when I click on 'connect', nothing happens and 'set as default' is grayed out and I cannot select it. I know that there is a separate bluetooth USB adapter available, but I'm using the headset mostly for my phone (which works fine) and occasionally my laptop so I don't really want to purchase it. I've already contacted Plantronics about the issue and this was their response:
    "Thank you for contacting Plantronics Technical Support.
    If you are using built in blue tooth and not our blue tooth USB adapter unfortunately we cannot assist you with your built in blue tooth, Plantronics does not supply drivers, here is our statement with regards to using built in blue tooth:
    If you are pairing the headset directly to your computer, the drivers that are required are for your computer's internal Bluetooth adapter. You will need the drivers supplied by your computer's manufacturer in order for you to use your Bluetooth headset as an audio device.
    Different computer manufacturers and computer models will use different internal Bluetooth adapters, so you'll have to contact your computer manufacturer to get those drivers. Most major computer manufacturers have a "Drivers" or "Drivers and Downloads" page on their web site in which you can enter your computer model in order to retrieve available drivers. You can typically find the Bluetooth drivers under the "Network" category. "
    I've checked for bluetooth driver updates and it says that none are available, I've also uninstalled and reinstalled the bluetooth drivers from the laptop. Sorry that this is a short novel, but I wanted to make sure to give all available details, any help or advice would be welcome. Thank you in advance.

    Hi Nt_winters,
    Thank you for all the information, it is very useful. I understand you are having an issue with HP Pavilion dv6-3120us Notebook with Windows 7 and your new Plantronics Voyager Legend. In the device manager are all unknown devices removed as well as the Bluetooth devices for the headset? Broadcom is recommended for Plantronics Voyager Legend headsets. Here is a link to that driver.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Plantronics Voyager 855 doesn't work with ipod touch 3rd gen OS 3.1.3

    I have a ipod touch 32G 3rd generation, OS 3.1.3, try to pair with Plantronics Voyager 855, can't find it at all. in the mean time, my nokia n95 find it immediately.
    And also try to pari Plantronics Voyager 855 with my macbook pro, OSX 10.6.2, can't find it either. in the mean time my sony vaio find it immediately.
    Am I miss something? Anyone can help?

    The Touch only works with bluetooth headphones, not headsets. A subtle, but important difference.

Maybe you are looking for