Unable to patch Encore CS3...

Hi everyone, I just recently had the Adobe Updater pop and inform me that an Encore patch was out. Then once the download completed it said unable to locate the product. So I manually downloaded the update and tried again but I got the same error. I am running Windows Vista Business on a 2.4ghz quad core with 2 gig of ram. My video card is a 512 mb Radeon x1900xtx. Thanks for the help.

The version of Encore that you are using is a pirated and/or hacked beta version. That's why the updater can't find Encore - it expects a proper version.
I suggest you get your money back from whomever sold it to you - immediately.
If you obtained it for free from questionable sources, well....'nuff said.
Here's a link that you may find helpful.

Similar Messages

  • Blue ray divd chapter in encore cs3 unable to navigate to next chapter

    Topic " Blue ray chapter in encore the navigation does not work in either preview or folder created or on the blue ray disc
    I had my first HD projected edited in premeire cs and exported back to tape without problem in High def. Then the projected was exported as mepg high def file and imported in encore project testing does not show any error. But when I preview and play a chapter from menu and then click on the next button it only momentarily goes to next chapter but returns back to begining of the chapater it was playing before. although end action for that has been properly set to go to the next chapter. In other words the menu chapters do not go and play the next chapter as they should even when the end points have been st properly. Any suggestions. One way suggested was that I should create short separate clips and put on individual time lien and then link the buttons on the menu to individual time lines rather than chapters on a single time line has this bug in encore being assressed if so how to go about it?/

    I found a similar problem with the chapters in a single time line not responding at all when linked to separate buttons when I used ENcore CS3 to create the BLuRay project and burn either a folder or image (both BluRay) and then to burn the folder or image to a DVD+-R disk with ImgBurn.
    I made sure there were no overrides set, and put each chapter in a separate playlist ( as had been suggested on CreativeCow's forum over a year ago and which worked nicely for me using Encore 2.0 for burning regular SD DVD's). However, this chapter to button system played ok for me in the Encore preview, but not to the burnt disk.
    When I used the separate timeline technique instead of the chapters, though, the project played perfectly in BluRay players.
    One complicating factor is that I am using Cineform to capture, and edit so I can't be sure that's not a factor.
    I also should note, that using my cineform footage, I couldn't get the chapter markers I set in PremiereCS3 to carry over to Encore for some reason so I had to set the chapter markers in Encore.
    If you wouldn't mind, would you create a short BluRay project (I assume you don't have cineform.
    1. Using the chapter points being careful about the overrides and using separate chapter playlists for each chapter.
    2. See if it previews properly
    3. Burning a BluRay folder.
    4. Burning the folder to a BD-RE disk with IMGBurn and see how that works.
    Let me know how that works. Thanks.
    John

  • HDV CS3 Project to SD Encore CS3

    I have a HDV sequence I've edited in PPro CS3. I want to export the sequence to Encore CS3 in standard definition.
    What is the best way to accomplish this?
    Option 1: Export the HDV sequence from PPro to an uncompressed DV AVI in Widescreen format at 720 x 480 (1.2). Import that AVI into Encore and let it compress the video to MPEG-2 format. I've read about some people using this workflow - however I'm not sure if I need to de-interlace my footage. I chose to use the lower field first since I'm going to DV AVI format. Should I de-interlace if I use this option? Also I noticed some small black bars on either side of my video when I go with this option - is there a work around for that?
    Option 2: Expor the HDV sequence from PPro to MPEG-2 DVD format. Will my video look better if I export right to MPEG-2 DVD format from PPro's HDV timeline?
    I have researched forums on this question however I'm unable to find a definitive answer on this subject.
    Thanks
    Foochuck

    Most people would find neither of your options acceptable. The absolute best method is to use Dan Isaacs' hd2sd script with AviSynth. Just search this forum and you will find a wealth of information. There is also a great tutorial on dv2film that will show you how to install the tools. Also see http://invertedhorn.axspace.com/hdv2dvd_basic.html for much of the same info.

  • Encore DVD 2.0 and Vista?,.....and Encore CS3 questions

    Encore dvd 2.0....are you guys going to continue to support this and make a patch for it to run under Vista? if so where can I find it? Kind of bad to buy a product and the company drops support on it immediately after purchase and it won't run on the operating system....
    Also is/will there be and upgrade to encore dvd 2.0?
    I know that you have Encore cs3, is that the upgrade to encore 2.0? and will you be selling Encore CS3, separate from Premiere? I need nothing in Premiere and want the Encore dvd and for it to run with Vista. Please have an option to buy just the Encore CS3 without having to buy premiere and stuff that I don't need because if that is the case then I will not be buying Adobe products anymore. I won't be forced to purchase extra software I have no need for in order to get the one program that I want...it is not worth it..easier to change to a different company for that product...just asking...and if you care about your customers, you might at least listen and consider what I have requested..thanks..t

    >chances of them selling encore cs3 in the future separate?
    Since their entire marketing push seems to be the bundling of the 2 products, I would say "slim to none"
    >hurry and buy encore 2.o
    The least expensive way to get Encore 3 is to buy Premiere Pro 2 right NOW and get a free upgrade to Pro3+Encore3 when it is released
    If you have any previous version of Premiere, you may even buy Pro2 for the upgrade price and receive the free upgrade to the version 3 duo

  • Encore CS3 crash when i click Build (SWF, BluRay, DVD Burn/Image/Folder) or Check project

    So I'm finally done with my DVD. Now i want this burned to a dvd or make an image file. Each time i hit BUILD or START (Check proj) the program quits and I'm left with the normal OS X message: The application Adobe Encore quit unexpectedly >> Ignore - Report... - Relaunch
    My DVD is not that fancy but i got a menu with 3 buttons made in PS with a pointer highlight and a animating background made in After Effects (using dynamic link) with some music. All of the buttons link to After effects comps with dynamic link. All of the after effects compositions are transcoded and works within the DVD preview (except the DVD menu background wont play, and i got a feeling it will play when i export an image or DVD). And all the After Effects comps links back 2 the menu when done. So there should be no error in the project flowchart.
    My flowchart: http://www3.sqr.no/index.php/get/64a267e640fddd15128d082abb72e3d92a3aedf680aabe20995beb7e e10ae32f
    (small jpg file)
    So i hit build and Encore quits, shut down, finada (Every time!). No matter what out put settings i use. I've exported DVD's from encore before on this computer without problems.
    ---I got this error report---
    Process: Adobe Encore [11321]
    Path: /Applications/Adobe Encore CS3/Adobe Encore CS3.app/Contents/MacOS/Adobe Encore
    Identifier: com.adobe.Encore
    Version: ??? (3.0.2)
    Code Type: X86 (Native)
    Parent Process: launchd [188]
    Date/Time: 2008-08-05 18:36:00.739 +0100
    OS Version: Mac OS X 10.5.4 (9E17)
    Report Version: 6
    Exception Type: EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
    Crashed Thread: 0
    Here is the rest of the error report: (rtf document)
    http://www3.sqr.no/index.php/get/a4568b7ade16f18d2acf09891b81b0bc7c0e4936287eebf2a509470d4 c7098fb
    Don't know if this any help but hope anybody got some ideas. I've been trying to look for a solution on the forums, but without any luck.
    By the way, I'm using a Mac Pro v3,1 (early 2008) with 2 x 2,8ghz quads, 10GB memory, NVIDIA GeForce 8800 GT (512mb) and plenty of disk space.

    Hey, i think if there could be any of the possibilities you talk about, it might have been a naming error. All files i created had the same name in the new project as in the old one. But i used 1 asset arrow that i copy pasted from a library button "Red facets button" and shift pasted on my own buttons as highlight (paste sub picture). In the first project i did not do this as a straight forward thing, a lot of deleting and adding because i had never done it before and there might have happened something with the naming of the arrow i pasted. I used the same arrow in the second project but without messing with delete, paste all the time. But some how there is no problems now, just something wrong with the last project file =S
    Not so important:
    I also noticed while building the new project i once got an "General error", not sure why but happened after a random crash. And 2 get rid of it i had to delete the menu and make it again (i could not edit anything in the menu without getting the error). I rebuild the menu and had another crash when exiting the program, because i thought my computer needs to boot after 2 days online. When i reopened the project i got "General error" in the menu again, but after some clicking it didn't show up (random). Finally i got my project setup and everything works, i did the copy past as sub picture as a straight forward thing.

  • Looking for a sample of the Flash Export from Encore CS3

    I am close to upgrading to the CS3 Production Premium and one of the features that intrigues me is the Flash export from Encore CS3. I have searched the Adobe site without success for a sample of what an exported project looks like and functions on the web. Can anyone point me to a on-line sample of an exported project? Thanks in advance :)

    'Black Gaps' in Flash usually come from the Flash trying to locate & load the next Flash file. Without a Pre-Loader, you will probably always have this... especially if your quality is set too high. This equates to longer load/buffer times which means there is nothing to display until there is enough video loaded in the buffer to play.
    If your ultimate goal is to create Video for the Web... you'll need to learn proper techniques for producing video for the web. It is much different than producing video for TV or DVD. On the web you have to compress your video a lot more therefore you should not use a lot of Motion/Movement in your Characters, Camera, Media, Motion Backgrounds, etc. The less Motion/Movement you have means you can lower your quality settings but still get awesome looking video & good load times eliminating the Black Gaps and making an all around smoother internet presentation/experience.

  • Internal Software error PGC  for encore CS3 !!! solved  !!!

    Almost everybody here knows the next error:
    PGC "timeline name" has an error at xx:xx:xx:xy internal software error : %0, line timeline name - PGCINFO: name= timeline name, ref=BPGC, time=xx:xx:xx:xy
    Where the y in time stands for the length of the timeline minus 2 frames. The BPGC error can also be FPGC or DPGC dependant on how many menu's there are in the project.
    It kept me awake for weeks and after reading this forum several times and comparing encore CS3 with encore 2.0 filenames I found the solution.
    This Error is a bug in encore witch has nothing to do with blank filename spots and sonic coding or codecs or planning your workflow with a pencil but pure with the combination Adobe Premiere Pro CS3 and Encore CS3.
    This is what generates the problem:
    In Adobe Premiere Pro CS3 you build project with video, sound and chapters. Then you export the project via the Media Encoder not Multplexed.
    Premiere CS3 then creates the following files:
    filename.M2V (video file mpg)
    filename.AC3 (audio file ac3)
    filename.M2V.XMPSES (an adobe file with preview info and chapter pointers)
    filname.XMP (??)
    It is the .M2V.XMPSES file witch creates the PGC error. If you use the MULTIPLEX DVD option then ADOBE will not create the .M2V.XMPSES file so there will not be an error. This trick mentioned by ADOBE and many others is just to go around the bug instead of solving it. Also with multiplex you have just one sound track. I use two sound tracks like 5.1 and a 2.0 track witch you can choose in a menu.
    Some people say it is the blank spots. Also not true. They have probably just erased the blank spots of the M2V file and forgot the .M2V.XMPSES file.
    When you just delete the .M2V.XMPSES file and then open the M2V and AC3 file in Encore as a new asset, make a timeline and menu's and the project will built and burn. Only if you delete this .M2V.XMPSES file Encore takes a longer time to import the M2V file and will be without the chapter points.
    Almost everything else will work like menu with sound and even a movie background (use M2V files). Only the motion buttons in a menu still wont work unless you use a black background !?!. Haven't figured this out yet. Only solution for this is use Encore 2.0. In this older version also the motion buttons will work without error's (everything else also so why buy CS3??)
    Here is what you must do create a DVD without errors:
    -Create a project in Premiere Pro, even with chapters.
    -Write down all chapter points (minutes:seconds:frames)
    -Create two new unique maps in explorer for example D:DVD1 and D:DVD2
    -Export in Premiere with Media Encoder without the Multiplex:DVD but with NON to the D:DVD1 map
    -Copy from D:DVD1 only the M2V and AC3 files to D:DVD2
    -Start up Encore DVD CS3 or 2.0
    -Create a new unique project in Encore for example "DVD" and save this in the map D:DVD2\
    -Then use Save-as (under file) and pinpoint to D:DVD2\dvd to be sure that all Encore's files are placed in this folder.
    -Select M2V file and make new timeline.
    -Make chapter points (you wrote down the points, did you?)
    -Create menu's, even with sound (AC3) and movie background (M2V)
    -Then render project if you have used a video for menu background
    -Finally Built and burnnnnnn!!
    -If you like to use motion buttons in a menu then use Encore 2.0
    I have double checked my work flow and it really works. I have built a project and burned with success Then I deleted the timeline and the M2V file. Copied the .M2V.XMPSES file in the used folder. Re loaded the M2V file in encore (this time much faster! and with chapter points). Tried to built and burn and back was the error. Also this happened in in Encore 2.0!!
    Hope that this will solve the PGC error once and for all !!!
    Marcel W
    system:
    acer aspire AMD 64 3800+
    2 GB
    250 GB hard drive for system
    750 GB hard drive for movie
    software Adobe Encore 3.0.1.008, Premiere PRO 3.2.0, Photoshop CS3 10.0, All upgraded
    NERO 7
    No Internet

    > Where the y in time stands for the length of the timeline minus 2 frames.
    This can actually vary, and so far at least, I don't think we've seen a pattern as to type of pgc error based on how many frames from the end it reports.
    > The BPGC error can also be FPGC or DPGC dependant on how many menu's there are in the project.
    Number of menus is not relevant; the iteration of the first letter is more related to subsequent occurrences of the error. In my current tests it did not always update; they may have been too similar.
    > This is what generates the problem...
    Well, the problem does not occur every time you do what you describe, any more than it occurs every time spaces are left in the file names. What you have is, as some other suggestions, a workaround. Thats not bad, and I wonder if you are onto something as to what is contributing to the problem.
    So, on to the interesting part whether the xmpses file, or at least what Encore is doing with it, is contributing something. I took an old test project that throws the PGC error and did some experiments.
    Background. I am a user who does get the pgc errors regularly, but not always. Creative Suite Production Premium, with PPro CS3 3.2.0 (374) and Encore 3.0.1.008. Pentium 4 2.8GHz 2G RAM, XP SP3, Multiple drives, Nvidia GEforce4 MX440 i.e. an older system. I have lots of stuff loaded and running, including virus protection and firewall, so there are any number of potential conflicts. But I get no crashes, and only one problem other than the pgc. (PPro and Encore monitor windows do this diagonal thing I suspect the display card, but the drivers are up to date. Maxing and then back to fit fixes it.)
    If you want to attempt to replicate my studies, here is a link to my problem clip and the first Encore project I describe.
    http://www.videoandcomputer.com/test/pgc_test.htm
    This project involves a very short AVI export from PPro CS3 - just over 8 seconds - called pgcbad_clip1.avi. Just to answer any question, the source is dv camera capture, and the source and avi export I use are dv avi type 2. There were no effects added on the timeline.
    Test 1: Create a project in Encore CS3. Use the sunset menu and delete all the buttons except "play all." Import the avi as a timeline. Set the timeline end action as "return to last menu" and set the button link to the timeline. Auto transcode. (Project settings are 8mbps max and a3c.) Check project shows okay; there is never a problem with that. Build to a DVD folder in a new folder. This project throws the pgc error.
    Test 2: Now create a new Encore project in a new folder. Use the same process, except import as timeline the m2v and a3c files from the first run. (I.e. if the clip is pgcbad_clip1.avi, in the test1 project folders, there is a folder called pgcbad_clip1.avi that has 6 files.) Note that in the folder they are imported from is an xmpses file from the first project's encore transcode. The build again fails with the pgc error - same frame, etc, but I really think the frame number doesn't matter.
    Test 3: Now create another new Encore project in a new folder. Use same process, but before importing the m2v and a3c as timeline, delete the xmpses file. Drumroll...... Build succeeds!
    Go figure.
    This is not the repeatable bug option weve been looking for, but based on a clip that always fails, it does demonstrate the odd event of deleting the xmpses file as a workaround. I wonder if that will give adobe something to work with.
    Can anyone else get my clip to work/not work in a straight project?
    Test 4: Just to answer the question since the avi file fails here, will the elemental option succeed? I exported elemental m2v and wav from PPro, used the same project process, and transcoded the wav. That build also works! I have seen this work both ways. I have had projects where the elemental failed, and an avi export worked. I do believe the elemental options work more consistently. But my project that I completed yesterday used all avi exports, animated buttons in the submenu, - no pgc error.

  • Adobe Encore CS3 compatiblity with Windows 8.1?

    Is Encore CS3 compatible?

    CS3 is old enough, and Win8.1 is new enough, that you may not find anyone here with that combination
    Have you tried installing and using?
    Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will often be needed
    You also MAY need to right click the program icon and select a compatibility mode from the popup option window (I know this for Win7 but do NOT know if Win8.1 has the same popup)

  • PGC error when burning in Encore CS3 ... help

    I've looked and can not find any one else with exactly this problem. I recently upgraded to Adobe Creative Suite 3 and can not get a DVD to burn. The project checks fine, the files transcode without difficulty but during the burning process, I very quickly get a PGC "file name" error.
    I have a Sony Pentium 4, 2 GHz, with 1.21 G of RAM, and plenty (30 G) free on my hard drive. I have a 16X Memorex DVD burner which is probably 6 months old, but up until now has worked great. I've tried several different brands of DVD-R media and same problem.
    I'd describe myself as an advanced amateur at video making. I taught myself on Nova's Video Explosion and burned 100's of dvd's on the Sonic's My DVD program over the past 5 years. Actually that system worked well, but I'd outgrown it. I downloaded Encore 2.0 free 30 day trial and loved it. I'd import (uncompressed) avi files that I'd created in other programs (mostly Video Explosion, but also Movie Shaker, and Windows Movie Maker), create menus in PS CS2 and my DVD's burned quickly and without errors at all. When my 30 days expired, I found they no longer offered 2.0 and I decided to spend the big bucks at got Creative Suite 3 really solely for Encore.
    I've now spent 3 days trying all kinds of different things, many different files from different sources and I always get the same error message of "PGC "file name" has an error at "time" internal software error %0, line "file name:, time 00:"time", ref= BPGC.
    I did read some messages on here about uncompressed avi vs. compressed avi. I did find that I was using uncompressed avi, but when I used Adobe premiere and rendered as MPEG 2 ( I believe), I got the same error. The only success (?) I had was when I rendered a file as a .MOV. It did burn without the dreaded error message, but the quality was extremely poor and jumpy.
    Any ideas? I've got a project due in a couple of days and at present I've got files that I can't get to DVD...

    So, finally I've found the source of the problem and a workaround!
    First the source:
    when Encore has to transcode a video it must corrupt the file, because it's the transcoded file that causes the problem, I tried this by importing a transcoded file into Encore 1.5 there it came with the same error.
    Now the workaround, ok maybe it isn't quite a workaround but it's a way to go:
    What I did was: I built my project new in Encore 1.5, because Encore 2.0 has a problem importing the videos by me, but if you would just import the videos in 1.5 and let 1.5 transcode them so that all of them would fit on a DVD you should be able to import the transcoded files in CS3 and it should work, no guarantee.
    Other possibility: try opening your project in encore 2.0 and re import your videos there and let 2.0 do all of the transcoding, that might work too!
    But for certain: don't let encore CS3 do all the transcoding!
    I'm working with PAL files I don't know if it will be the same by NTSC, but it's worth a try!
    If anybody feels like reproducing the bug, here is the way to do it:
    Make a project in Encore CS3 and import Videos encoded by premiere as MPG2-DVD (I think: .m2v .wav) and set the transcoding options to automatic, encore should have to transcode the files. Then let encore make the DVD, at some point you should get that nice PGC error!

  • DVD pauses right before credits Encore CS3

    Hello,
         I am making a DVD and have burned a copy, everything is fine except when the video goes into the credits the video pauses for a second or so.
    Here are my steps in creating the DVD.
    1. Edited movie in Premiere
    2. In Premiere I went to Title>New Title>Default Still and on the 'Roll/Crawl Options' I added a Roll
    3. Typed in my text and closed it.
    4. I Put the Credits video clip in the timeline and added a 'Cross Disolve' transition
    5. I Went to File>Export>Export to Encore   I Exported the movie with this summary  -
         NTSC, 720x480, 29.97 non-drop frame [fps], Progressive, Quality 5.0
         48 kHz, 16 bit, PCM
         VBR, 2 Pass, Min 1.50, Target 4.00, Max 7.00 [Mbps]
    6. In Encore I added a basic menu
    7. I then Burned the DVD
    Again my problem is that halfway into the cross disolve leading into the credits it pauses for ~1sec.  I think it may be the way Encore burns the disc because this does not happen in the preview window of Encore.
    I am using . . .
    Windows XP Profesional
    Premiere CS3
    Encore CS3
    All help is appreciated,
    Nicholas

    I have never heard of DiscMaker brand. Could be great, or maybe not. Many companies buy the cheapest discs that day, and then rebrand them, like Memorex, so you never know what you are getting.
    An ISO is an Image of the disc, and is created, when you choose Burn to Image. It is similar to doing a Burn to Folder, but is different. The great freeware, ImgBurn can burn either the ISO, or the VIDEO_TS created with Burn to Folder. I like that second option a bit better, only because the VIDEO_TS folder will play in most DVD software players, like MediaPlayer Classic HC (freeware). ImgBurn will also tell you what the mfgr. of those discs is.
    I edit most Projects, a bit differently, than many others. Each segment of my Project is in a separate Sequence in PrPro. Each starts with a tiny bit of Black Video, and then fades into the footage with a Dip-to-Black (could use a Cross-Dissolve here too). Each ends with a tiny bit of Black Video, with the same Transition. My Credits would be on their own Sequence, as all of my "chapters/scene." In Encore, each Sequence goes onto a separate Timeline, and each is created in their proper order in Encore, so my Into is done first, "Scene 1" next, and so on, then my Credits are the last to be created in Encore. That keeps the writing of these in order, so the laser does not have to skip about, unless the user does so. This makes playback as smooth as is possible, and with the Dip-to-Black, there is never any clue given the user, that the laser has to move about. Unless they had a very accurate stop watch, they'll never pick up that their might be a slight pause, waiting for the laser.
    Good luck,
    Hunt

  • Pioneer BDR-202 hard reboots system in Encore CS3

    I am having a problem where Encore CS3 hard reboots when building my project at the point where it starts to actually write data to disc. The weird thing is it works absolutely fine with a BD-RE and will not work at all with BD-R media from the same manufacturer (TDK). I've tried creating an image and then burning, and it still happens. I'm not sure what's wrong and I really don't want to be stuck with a drive that only does BD-RE's (which we just ended up having to send to a client).
    After the system hard reboots, Windows XP comes back up stating it recovered from a serious error and when I look into the error it appears device driver related, though it doesn't say exactly which driver. I've also tried using IMGBURN software and the Roxio software that came with the drive and I get the same problem.

    Windows XP does not support Blu-ray natively. In fixing that problem, I suspect that either anydvd or powerdvd may have installed bits that are causing your problem with Encore.
    To meet your deadline, create a Blu-ray image in Encore, and then burn it using ImgBurn:
    http://www.imgburn.com/
    Then, when you have time - try to troubleshoot your system to find out why Encore doesn't see the Blu-ray drive correctly.

  • Encore DVD to Encore CS3

    I have a DVD that was created with the Premiere 2.0 and then into Encore DVD. Now I need to make this same DVD into a BluRay. I have the new Encore CS3 but it is not letting me open the file.
    Any hope of this working?
    I also I cannot open the old Premiere file into CS3. Is there a way around this.
    Thanks,
    ms

    Unless you still have the original, untranscoded AVI files, then forget it. Seriously.
    And if you need to make more than a couple of burned copies, forget it.
    You cannot replicate Blu Ray created in Encore CS3 - the plants will
    i not
    accept the discs.

  • Can't create working DVD in Encore CS3

    Hi,
    I'v created an Encore CS3 project which works perfectly when built to a flash (.swf) and the buttons, menus & videos all works perfectly in the preview in Encore.
    I've tried burning DVDs two ways:
    1. directly from Encore
    2. burn an image to my hard drive and burn that to disc using "ImgBurn" which is freeware recommended by another forum user.
    Both have the same result - the video will play on my pc, but the buttons won't work. When I try a DVD player, the first play opens up but it won't allow me to arrow through menus or select anything - I tried both the play key & the enter key on the remote.
    I'm burning to a DVD+R
    Any ideas? What have I done wrong?

    The first thing I would check would be whether there are any overlapping buttons.

  • Encore CS3 subtitles won't default to "off"

    I'm using Encore CS3, and have a couple of subtitle tracks, but want the default to be "subtitle off" and despite my setting the disk build properties to "Subtitle: Off", the disk, when created (and even in the Encore preview windows), the subtitle always defaults to playing the first subtitle track.  I don't want the viewers to have to turn off the subtitles every time they view the DVD.  The "Play" button for the program on the main menu is set to "Subtitle: No Change". So, unless I go and turn the subtitles on, the DVD should theoretically play with subtitles OFF, right?
    Now, I can force the "Play" link to play the track with subtitles off, but then that prevents the viewers from turning the subtitles on via the subtitles menu (which throws back to the "Play" link, which would then turn the subtitles back OFF when it's hit.)
    I suppose I could create a separate identical copy of the main menu, the "First Play" one with the subtitles forced "off," and then one that the subtitle selection menu can throw back to, that is set at "No Change", but that all seems kind of unnecessarily circuitous.
    So far the only other "workaround" I can think of is to make the first subtitle track a blank track, and then put the "real" subtitles on tracks 2 & 3.  But that seems like kind of a cheap workaround.
    Anyone have any insights?  Thanks!

    Hello.
    You don't actually mention if this problem occurs in preview or in a real player.
    If in preview - what happens on a real disc?
    if on a real player, is the player perhaps set to have a default subtitle language? I ran across this on a recent project & had to force subtitles to default off on the disc, as the player insisted on displaying subtitles because it's firmware had set it's language as "English".

  • Encore CS3 library install fails on win7 64bit pro

    Hi
    Just installing my discs from Premiere Pro CS3 onto a win 7 64 bit pro PC, which was my Win X 32bit PC but with all new components except Power supply unit and my Audigy X-Fi elite pro sound card.
    Exit Kaspersky IS 2014.
    Premiere CS3 failed to go on though other third part components did.
    I then disabled Kaspersky IS 2014 AND made the User Account Control 'off', and bingo, it worked.
    So now reboot and turn off KIS and check UAC is off, and proceed, install Encore CS3. it went on
    However Encore CS3 library has a red X.
    try again select install library, long wait for the green progress bar to finish, result still not on.
    Why and what else can I do ?
    Has anyone else had a battle installing CS3 onto win7 pro 64bit or just win7 64 bit ?
    Merlin

    CS3 is 32 bit. But it sounds like you got that part to work. Does Encore run? I don't think that is the issue; I suspect permissions.
    If you are just wanting menus, etc, just use the CS6 download. Don't use one of the links with an installer; just download and unzip to the correct location. The menus were not updated from the pre-CS4 pars (Encore knows to do this), so I suspect you will be fine. I have not actually used the recent library with CS3.
    Encore Help | Download full library content/functional content

Maybe you are looking for