Unable to perform a V2V to a CSV in Virtual Machine Manager if there is insufficient disk space on the local drive

Server 2012 R2 with 60 Gb SSD mirror
http://support.microsoft.com/kb/2685247
does not work, as the attached vhdx storage never appears as volume in VMM / Fabric / Host / Properties / Storage
Disk shows there, but no volume (even one was created)
VMM / Fabric / Host / Properties / hardware / Storage there is NO vhdx disk for "Making the
new storage Available for Placement in VMM"
Any other ideas?
Seb

Hi Sophia,
KB3000850 is installed, the server restarted. But I'm sorry to say, same situation:
PS C:\Windows\system32> Enable-DedupVolume "E:"
Enabled            UsageType          SavedSpace           SavingsRate
Volume
True               Default            26.95 MB             0 %
E:
PS C:\Windows\system32> Start-DedupJob -type Optimization -volume "E:" -wait
Type               ScheduleType       StartTime              Progress   State
Volume
Optimization       Manual
0 %        Failed                 E:
Eventlog:
ID 4119
Data Deduplication could not initialize change log under \\?\Volume{7a4277ad-72ee-11e4-80bf-0050569d1d6b}\System Volume Information\Dedup\Logs. The error code was 0x8056530a, There is insufficient disk space to perform the requested operation.
ID 4106
Data Deduplication warning: Available memory (4095 MB) is less than minimum required (4392 MB)
Error: 0x00000000, The operation completed successfully.
Volume E: is 549 GB and have 186 GB free
Memory is 2,6/8,0 GB at the moment
Best regards,
Manuel

Similar Messages

I recently re-loaded iphoto, and now am unable to upload photos from my camera - saying there is insufficient disk space

I recently re-loaded iphoto, and now am unable to upload photos from my camera - saying there is insufficient disk space. does anyone have a solution?

Assuming you have space on your disk, then it could be a symptom of a damaged Library.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Deduplication: There is insufficient disk space to perform the requested operation

Hello,
on my Win2012R2 Fileserver is a 550GB disk with userdrives.
I startet Data Deplication but after 100 Optimized Files the job stopped and I cannot start it again.
If I check the Event Log I find:
Data Deplication could not initialize change log under \\?\Volume{ID}}.... The error code was 0x8056530a, There is unsufficient disk space to perform the requested operation. (Event ID 4119)
Then I tried to unoptimize the files with Start-DedupJob -type Unoptimization -volume "E:" but I got another error:
HRESULT 0x8056533a, This kon will not run at the scheduled time because it requires more memory than is currently available.
On the 550GB disk I have about 140GB free diskspace.
The server have 8GB RAM and use 2,3GB at the moment.
CPU is at 0-2%
SYSTEM have full access on the drive, there is no SWAP or boot file on it.
Any more ideas?
I already tried a reboot... ;)
Thanks.
bye Manuel

Hi Sophia,
KB3000850 is installed, the server restarted. But I'm sorry to say, same situation:
PS C:\Windows\system32> Enable-DedupVolume "E:"
Enabled            UsageType          SavedSpace           SavingsRate
Volume
True               Default            26.95 MB             0 %
E:
PS C:\Windows\system32> Start-DedupJob -type Optimization -volume "E:" -wait
Type               ScheduleType       StartTime              Progress   State
Volume
Optimization       Manual
0 %        Failed                 E:
Eventlog:
ID 4119
Data Deduplication could not initialize change log under \\?\Volume{7a4277ad-72ee-11e4-80bf-0050569d1d6b}\System Volume Information\Dedup\Logs. The error code was 0x8056530a, There is insufficient disk space to perform the requested operation.
ID 4106
Data Deduplication warning: Available memory (4095 MB) is less than minimum required (4392 MB)
Error: 0x00000000, The operation completed successfully.
Volume E: is 549 GB and have 186 GB free
Memory is 2,6/8,0 GB at the moment
Best regards,
Manuel

VMM is unable to perform this operation without a connection to a Virtual Machine Manager management server.

Hi,
I'm running SCOM and VMM integration. For the most part everything is working. However I get lots of alerts generated in regards to my scvmm server.
This is a the guide I used:
https://technet.microsoft.com/en-ca/library/hh882396.aspx
SCOM + VMM 2012r2 Ur4
One of the Errors(which appears to be root issue):
The PowerShell script failed with below
exception
System.Management.Automation.CmdletInvocationException: VMM is
unable to perform this operation without a connection to a Virtual Machine
Manager management server. (Error ID: 1615)
Use the Get-VMMServer cmdlet
or the -VMMServer parameter to connect to a Virtual Machine Manager management
server. For more information, type at the command prompt: Get-Help Get-VMMServer
-detailed.At line:109 char:12
+ $vmm = Get-SCVMMServer $VMMServer -Credential
$cred;
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
at
System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object
input, Hashtable errorResults, Boolean enumerate)
at
System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean
ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[]
pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext
funcContext)
at
System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame
frame)
at
System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
frame)
at
System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
frame)
Script Name:
GetStorageSubsystemPerfScript
One or more workflows were affected by
this.
Workflow name:
Microsoft.SystemCenter.Advisor.StorageSubsystem.Performance.PerfCollection
Instance
name: SCVMM01.Domain.com
Instance ID:
{B5175EAC-D64D-2553-D567-F19B5C864BBD}
Management group: OMGRP82

Can you connect from powershell? get-vmmserver <VMMServerComputerName>
If this doesn't work it's likely that your VMM server doesn't work. Check Application log to see if there are errors related to VMM service.
You can also collect traces as described
here and attach them to this thread.
Are you using a domain administrator account? (this is the default allowed after SCVMM is installed - until other users are added).
also try restarting VMM server or VMM services once.
this occur if the SQL database owner is indicated as NULL. Try adding the SQL SA account as db owner.
refer this once -
https://social.technet.microsoft.com/Forums/en-US/a4199cb2-ccbf-4bb0-96c1-7a640143f81b/error-id-1615-vmm-is-unable-to-perform-this-operation?forum=virtualmachingmgrhyperv
Thanks, S K Agrawal

Unable to use free version regardless of browser on any machine. I login with adobe id but then the loading screen just hangs.

Unable to use free version regardless of browser on any machine. I login with adobe id but then the loading screen just hangs. can't get any further - Tried all suggestions like clearing browser caches but no change.
Got a couple of projects i wanted to try this on and if the software works I will probably take a subscription but considering this isn't working at all will look elsewhere.
Also - adobe live chat support is useless.

Hi,
please share the Adobe ID that you are using with DL-AdobeStory-support<at>adobe<dot>com and we will investigate the issue.
Thanks
Aurobinda

System Center Virtual Machine Manager SC VMM 2012 SP1 Installation fails: Unable to assign the name NO_PARAM to this host because this name is already in use.

I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please help

I had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server.

Acrobat X Pro Error when Save As JPEG: Insufficient Disk Space to Perform Operation

Using Acrobat X Pro when trying to save a PDF as an Image - JPEG format, the Acrobat application fails with an error: "Acrobat could not save a page in this document because of the following error: Insufficient disk space to perform the operation (Page 1)". Please help with a solution to this problem. The problem is not because of insufficient disk space on my PC.

Thank you for the reply.
Please can you help with the location of the TEMP folder and which temporary files to delete (file type/extension). Each of the these folders include an "Adobe" Folder. Each "Adobe" folder size is less than 1MB.
I am using Windows 8.1 Enterprise 64-bit. I have the following Adobe Acrobat applications installed: Distiller X, X Pro and Reader XI. Is this combination perhaps causing the problem?

Insufficient disk space to perform full backup

Hi to all
i'm trying to backup my acs 5.2 "backup acs repository repository application acs" but acs gives me a critical error.
% Creating backup with timestamped filename: acs-121022-1431.tar.gpg
% Error: Insufficient disk space to perform full backup.
% Try lowering the data window on ACSView Data retention under Data Management Configuration.
% Application backup error
how do i lower the data witdow in ACS view?
thanks in adv
Antero

Hi
the problem is solved now, i've openned a TAC and the cisco Guy told me how to solve it.
in summary you need to have root access to ACS and then erase de acsview database and put a clean one.
my acsview db has grown to 175GB., this was caused by the misconfiguration of acsview database doesn't being backuped and the purgin was, in this case, not being also done.
so Brian if you hav e the same problem then you need to open a TAC case.
Thanks
Antero Vasconcelos

PXI-1031 Realtime no longer working with labview. "Insufficient disk space to perform backup"

The realtime labview project was working until a couple weeks ago and the only error that is being shown on the PXI is this error message.
"NI Configuration Manager: Insufficient disk space to perform backup" Everything before that looks like it's starting up just fine. I recently removed the hard drive and deleted the 4gb network log file because it seemed that a 4gb file on a fat32 file system was probably causing the problem. After doing this the project worked when I tested it but others in my lab said that it was broken again the next day.
Any help would be greatly appreciated because I'm not all that familiar with the equipment.
Solved!
Go to Solution.

In this situation, we actually want the PXI controller to be in safe mode. When the controller is reformatted, it will stay in safe mode until the proper software has been installed. Software installation is done from within safe mode, so being stuck there is a good thing.
The networking issues you’re seeing are independent of the controller being in safe mode. Most likely, the network settings were not retained during the reformatting, and your computer needs to reconnect with the device. First, make sure that your computer is set to obtain its IP address automatically. In Windows 7, this can be configured by going to the Network and Sharing Center and clicking on Change adapter settings. From there, right click on Local Area Connection and select Properties, then select Internet Protocol Version 4 (IPv4) and click Properties. In this Window, make sure that Obtain an IP address automatically is selected.
Once this is configured, remove your PXI controller from the chassis and flip the IP reset switch to ON. Put the controller back in the chassis and connect the PXI directly to your computer via an Ethernet cable. When you turn your PXI chassis back on, the chassis and computer should find each other and configure themselves to be on the same subnet. From there, you can set your desired network settings and install the necessary software.
If this doesn’t work, the next step would be to check for any firewalls or antivirus that may be running. These could potentially interfere and block communication.

NI Configuration Manager: Insufficient disk space to perform backup

Hi,
I'm having an issue with my PXI-8110 controller running LabVIEW Real-Time 10.0.1. On start-up, I receive a message is displayed saying "NI Configuration Manager: Insufficient disk space to perform a backup" This message just appeared. Upon starting an FTP session I was able to see that there is only 181 megs of data on the hard drive. In MAX, when I view the system settings of the remote PXI controller, it says that there are 0 bytes available. I'm not sure why this is the case. I'm not able to deploy any Veristand projects to the controller as a result. Has anyone experienced this problem?
Thanks,
Cosimo

Hello WillPwr,
I have now had 2 different systems develop this exact error. After the first occurrence, I assumed that it was a problem with the HD and replaced it. Now, I am starting to worry that there may be an issue with the file management routines in LabVIEW RT. I understand how to fix the issue, but do you have any idea of what causes the issue. In my application, I create a temporary file to store DAQ data then save the data to a log file. After a test is complete, the log file is transferred to a "Host" computer and the process is started again by the user when they initiate a new test. My question: can the continuous creating and deleting of temporary files be causing the file management in the RT system to become corrupt?
It is annoying for a customer to have to go through the process of formatting the hard drive and re-installing the software. Not to mention that it makes the software appear to have issues... Which it may have, but I have been very careful to close and open new files as to not develop open file references.
Any Thoughts?
Big Ev.

URGENT - Error "Unable to open file because it isn't a valid Keynote document" - and there is no index file (so the usually suggested solution doesn't work)

Hi there,
As you see in the heading, I am getting the error "Unable to open file because it isn't a valid Keynote document". There has been a number of threads on this and there seems to be a usual work around that works in many cases, by changing the file extension to .zip and then looking for the index file and making some more extension changes...unfortunately, in my case (and it also happened to others), there is no index file, so the usually suggested solution doesn't work...Can someone please help? I am working on a tight deadline and would like to try and recover the file.
Thanks a lot in advance.
Best,
Just a regular apple user
PS: any other presentation opens fine in Keynote (09)

Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
Try those and report back and we will see what we can come up with.

Insufficient disk space, unable to install on different drive.

I forgot to change the install path and tried installing photoshop, illustrator, and indesign on my C drive which was full.
I uninstalled everything and switched the install path to my D drive and tried again. But now im getting an error when trying to install on D that my C drive is full.
I'm unable to install any of these programs despite uninstalling everything including creative cload manager.
any help?

Okay looks like I might have solved my problem.
Since C: was seriously full >330mb I cleared about 10 gigs.
Seems to be installing now. Must have some kind of file the has to be installed on C either way.

Insufficient Disk Space but unable to delete or move files to EHD

My daughter is home from her freshman year of college, and her MacBook hard drive is FULL. Her plan was to begin by moving her iPhoto files to her EHD, but told me it 'wouldn't let her.' She's right - I can't move or delete the photos in her iPhoto Library. I'm having the same issue with other file formats, including .docs.
What am I missing, or what should I be doing to resolve this? Many thanks (in advance!)

The drive is about 99% full (I know, I know ... trying to make my 19-year old daughter understand how BAD this is ... @#$@#$@#$ ) NO error messages even pop up.
In iPhoto as I tried to move files to the EHD, I had no luck at all. When I tried simply moving to the Trash, I had no luck EXCEPT for a couple of folders with only a few photos, and only then if I moved to trash from the File menu - no dragging, no copy/paste or cut/paste.

Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)

Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng

Recieved error messages while performing recovery to factory state from the hard drive

HP Touchsmart tx2-1165ea, product no:NM515EA,microsoft vista SP1 operating system.
I keep recieving error messages during recovery to factory state from hard drive and perfoming a recovery from my recovery disc hangs on disc2. Therefore I am unable to update vista sp1 to vista sp2 the reson is: error SMI primitive installer failed (ox8007371c).
Reason for recovery ? performed a clean upgrade to windows 7(as rcommended) but I dont like that operating system
Request: kindly rectify my factory shipped recovery partion errors.

Thank you for the clarification.
Typically, service packs have some requirements before they are listed in Windows update. It's really the build ID that determines what updates are listed through Windows Updates. Various Windows Updates will change the build ID and once that prerequisite is reached, service should be listed. I know that service pack 2 does not show in Windows Update until several updates and restarts later on my Vista SP1 system at home.
Have you tried running Windows Update multiple times making sure to install the important updates or did you go straight to trying to manually install the service pack?
1. recovery disc is on the hard drive shipped in the computer from the factory.
I may be reading too much into this, but does this mean the recovery was performed by pressing F11 during boot or by using disks created using the hard drive's recovery partition prior to upgrading to it to Windows 7?
Also, how many times did you attempt the recovery from scratch? Many users have stated simply doing the recovery again took care of the issue and this seemed to be independent of manufacturer.
You can try the registry edit listed here, but registry edits are a little risky and do so at your own risk. However, try the first solution in the registry edit post.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Unable to perform a V2V to a CSV in Virtual Machine Manager if there is insufficient disk space on the local drive

Similar Messages

Maybe you are looking for