"Unable to perform this operation because No enough ram"? Insolent!

Hello,
I use Photoshop CS4 Extended and I don't speak english but..... When using the quick selection tool sometimes gives me the following message "Unable to perform this operation because the available RAM is insufficient." Actually I do not understand because thanks to a software that gives me real-time active memory available, I know that this is largely sufficient (more than 1GB of available). Besides, I need only close the file. psd and I reopen the message to disappear In short .... I do not understand and I find it annoying!!
Best regards,
Ben
Ps: The making of a double q only rarely solves the problem.
Setup: 2 GB of RAM
Xp 32 bit
69% of available RAM memory has toshop or 1200 MB

J'ai installé le sp3 de Xp et le bug semble avoir disparu (j'etais rester au sp2)....

Similar Messages

In printer services error message says "unable to perform this operation"

when I try to check my ink levels in the printer services area, an error message comes up "unable to perform this operation"
I have deleted and reinstalled my printer. I have downloaded the lastest driver--all to no avail

Please read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

VMM is unable to perform this operation without a connection to a Virtual Machine Manager management server.

Hi,
I'm running SCOM and VMM integration. For the most part everything is working. However I get lots of alerts generated in regards to my scvmm server.
This is a the guide I used:
https://technet.microsoft.com/en-ca/library/hh882396.aspx
SCOM + VMM 2012r2 Ur4
One of the Errors(which appears to be root issue):
The PowerShell script failed with below
exception
System.Management.Automation.CmdletInvocationException: VMM is
unable to perform this operation without a connection to a Virtual Machine
Manager management server. (Error ID: 1615)
Use the Get-VMMServer cmdlet
or the -VMMServer parameter to connect to a Virtual Machine Manager management
server. For more information, type at the command prompt: Get-Help Get-VMMServer
-detailed.At line:109 char:12
+ $vmm = Get-SCVMMServer $VMMServer -Credential
$cred;
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
at
System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object
input, Hashtable errorResults, Boolean enumerate)
at
System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean
ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[]
pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext
funcContext)
at
System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame
frame)
at
System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
frame)
at
System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
frame)
Script Name:
GetStorageSubsystemPerfScript
One or more workflows were affected by
this.
Workflow name:
Microsoft.SystemCenter.Advisor.StorageSubsystem.Performance.PerfCollection
Instance
name: SCVMM01.Domain.com
Instance ID:
{B5175EAC-D64D-2553-D567-F19B5C864BBD}
Management group: OMGRP82

Can you connect from powershell? get-vmmserver <VMMServerComputerName>
If this doesn't work it's likely that your VMM server doesn't work. Check Application log to see if there are errors related to VMM service.
You can also collect traces as described
here and attach them to this thread.
Are you using a domain administrator account? (this is the default allowed after SCVMM is installed - until other users are added).
also try restarting VMM server or VMM services once.
this occur if the SQL database owner is indicated as NULL. Try adding the SQL SA account as db owner.
refer this once -
https://social.technet.microsoft.com/Forums/en-US/a4199cb2-ccbf-4bb0-96c1-7a640143f81b/error-id-1615-vmm-is-unable-to-perform-this-operation?forum=virtualmachingmgrhyperv
Thanks, S K Agrawal

"Can not perform this operation because the layout is too complex"

"Can not perform this operation because the layout is too complex"
to create a 3D extrusion
Hello
Is it possible to work around and solve this problem?
Without going through the box: cutting 4 part
please
xavier.

Merci Violon popur tes conseilles, cool !
After clipping of an object on a photo
I want to make a 3D extrusion.
With a picture of this size that does not work :
1979/2765 300PP 31,3Mo
I have this error message appears: “ Can not perform this operation because the layout is too complex ”
For successful operation
I must necessarily reduce the size of the photo to
597/834 300PP 2,85Mo !!!
How not to lose the pixel ?
I need it additional plugins ?
Version Adobe Photoshop : 14.2 (14.2 20131211.r.515 2013/12/11:23:00:00) x64
Système d'exploitation : Mac OS 10.9.1
Architecture système : UC Intel Famille :6, modèle :44, niveau :2 avec MMX, SSE Entier, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Nombre de processeurs physiques : 12
Nombre de processeurs logiques : 24
Vitesse du processeur : 2930 MHz
Mémoire intégrée : 32768 Mo
Mémoire libre : 27285 Mo
Mémoire disponible pour Photoshop : 31299 Mo
Mémoire utilisée par Photoshop : 90 %
Taille de la mosaïque d'images : 1024K
Niveaux de mémoire cache de l'image : 4
2 X 2,93 GHz 6-Core Intel Xeon
NVIDIA Quadro 4000 2048 Mo
4 X 8 (32 Go) DDR3 @ 1066Mhz
2 X OWC Mercury Extreme Pro 6G SSD Media (System acquisition / Projects)
2 x 2 To de DD (5400tr/min)

Cant schedule refresh - We can't perform this operation because this workbook uses unsupported features. Correlation ID: 42e1a475-20ea-41ae-9d8d-e1889d4c2d77

Hi all,
I have a workbook with a set of scheduled refreshes (powerquery via the gateway from web api). I've modified it by adding a new source from the azure marketplace. I've successfully added it to the DMG
I've uploaded the new report and I'm able to browse it successfully in powerbi
But when I try to schedule a refresh I get the following error against all the data connections
We can't perform this operation because this workbook uses unsupported features. Correlation ID: 42e1a475-20ea-41ae-9d8d-e1889d4c2d77
Also get the error if I uncheck the new data source
Below is my PQ query for the new data source. Which unsupported feature am I using?
let
Source = Marketplace.Subscriptions(),
#"https://api.datamarket.azure.com/Data.ashx/BoyanPenev/DateStream/v1/" = Source{[ServiceUrl="https://api.datamarket.azure.com/Data.ashx/BoyanPenev/DateStream/v1/"]}[Feeds],
ExtendedCalendar1 = #"https://api.datamarket.azure.com/Data.ashx/BoyanPenev/DateStream/v1/"{[Name="ExtendedCalendar"]}[Data],
#"Filtered Rows" = Table.SelectRows(ExtendedCalendar1, each [YearKey] >= 2010 and [YearKey] <= 2020),
#"Inserted End of Month" = Table.AddColumn(#"Filtered Rows", "EndOfMonth", each Date.EndOfMonth([DateKey]), type datetime),
#"Inserted End of Quarter" = Table.AddColumn(#"Inserted End of Month", "EndOfQuarter", each Date.EndOfQuarter([DateKey]), type datetime),
#"Inserted End of Week" = Table.AddColumn(#"Inserted End of Quarter", "EndOfWeek", each Date.EndOfWeek([DateKey]), type datetime),
#"Renamed Columns" = Table.RenameColumns(#"Inserted End of Week",{{"DateKey", "Date"}}),
#"Changed Type" = Table.TransformColumnTypes(#"Renamed Columns",{{"Date", type date}, {"EndOfMonth", type date}, {"EndOfQuarter", type date}, {"EndOfWeek", type date}}),
#"Renamed Columns1" = Table.RenameColumns(#"Changed Type",{{"YearKey", "CalendarYear"}}),
#"Inserted FiscalYear" = Table.AddColumn(#"Renamed Columns1", "FiscalYear", each Date.Year(Date.AddMonths([Date],6)), type number),
#"Inserted FiscalMonth" = Table.AddColumn(#"Inserted FiscalYear", "FiscalMonthSortId", each Date.ToText(Date.AddMonths([Date],6),"MM"), type number),
#"Inserted Month" = Table.AddColumn(#"Inserted FiscalMonth", "FiscalMonth", each Date.ToText([Date],"MMMM"), type text),
#"Inserted Month1" = Table.AddColumn(#"Inserted Month", "CalendarMonthSortId", each Date.ToText([Date],"MM"), type number),
#"Added Custom" = Table.AddColumn(#"Inserted Month1", "DateIsWeekDay", each if [DayOfWeekMon] > 5 then "no" else "yes"),
#"Added Custom1" = Table.AddColumn(#"Added Custom", "HoursPerWeekDay", each if [DateIsWeekDay] = "yes" then 7.5 else 0.0),
#"Changed Type1" = Table.TransformColumnTypes(#"Added Custom1",{{"DateIsWeekDay", type text}, {"HoursPerWeekDay", type number}}),
#"Added Custom2" = Table.AddColumn(#"Changed Type1", "Custom", each Function.Invoke(DateTimeZone.UtcNow,{})),
#"Split Column by Delimiter" = let #"Changed Type" = Table.TransformColumnTypes(#"Added Custom2", {{"Custom", type text}}, "en-AU"),
#"Split Column by Delimiter" = Table.SplitColumn(#"Changed Type","Custom",Splitter.SplitTextByDelimiter(" +"),{"Custom.1", "Custom.2"})
in #"Split Column by Delimiter",
#"Changed Type2" = Table.TransformColumnTypes(#"Split Column by Delimiter",{{"Custom.1", type datetime}, {"Custom.2", type time}}),
#"Removed Columns" = Table.RemoveColumns(#"Changed Type2",{"Custom.2"}),
#"Renamed Columns2" = Table.RenameColumns(#"Removed Columns",{{"Custom.1", "RefreshDateUtc"}}),
#"Added Custom3" = Table.AddColumn(#"Renamed Columns2", "RefreshDateLocal", each [RefreshDateUtc] + #duration(0,10,30,0)),
#"Changed Type3" = Table.TransformColumnTypes(#"Added Custom3",{{"RefreshDateLocal", type text}}),
#"Added Custom4" = Table.AddColumn(#"Changed Type3", "RefreshDate", each [RefreshDateLocal] & " (UTC + 10.5)"),
#"Changed Type4" = Table.TransformColumnTypes(#"Added Custom4",{{"DateInt", Int64.Type}, {"CalendarYear", Int64.Type}, {"HalfYearKey", Int64.Type}, {"QuarterKey", Int64.Type}, {"MonthKey", Int64.Type}, {"MonthOfYear", Int64.Type}, {"MonthOfHalfYear", Int64.Type}, {"MonthOfQuarter", Int64.Type}, {"QuarterOfYear", Int64.Type}, {"QuarterOfHalfYear", Int64.Type}, {"HalfYearOfYear", Int64.Type}, {"DayOfYear", Int64.Type}, {"DayOfHalfYear", Int64.Type}, {"DayOfQuarter", Int64.Type}, {"DayOfMonth", Int64.Type}, {"DayOfWeekMon", Int64.Type}, {"DayOfWeekSun", Int64.Type}, {"WeekOfYearISO", Int64.Type}, {"FiscalYear", Int64.Type}, {"FiscalMonthSortId", Int64.Type}, {"CalendarMonthSortId", Int64.Type}}),
#"Added Custom5" = Table.AddColumn(#"Changed Type4", "CalendarMonthId", each [DateInt]/100),
#"Round Down" = Table.TransformColumns(#"Added Custom5",{{"CalendarMonthId", Number.RoundDown}}),
#"Changed Type5" = Table.TransformColumnTypes(#"Round Down",{{"CalendarMonthId", Int64.Type}}),
#"Added Custom6" = Table.AddColumn(#"Changed Type5", "Custom", each Date.ToText([Date],"ddd")),
#"Renamed Columns3" = Table.RenameColumns(#"Added Custom6",{{"Custom", "DayName"}}),
#"Added Custom7" = Table.AddColumn(#"Renamed Columns3", "PastMonthFilter", each if [CalendarMonthId] < Number.FromText(DateTimeZone.ToText(Function.Invoke(DateTimeZone.UtcNow,{}),"yyyyMM")) then 1 else 0)
in
#"Added Custom7"
Jakub @ Adelaide, Australia Blog

I don't think that's it. I deleted all the powerview reports and worksheets containing pivot tables/charts, and the refresh worked with the function.invoke() call.
The only reason that's in there is because the execution stops there when I dont have it and i have to manually click an 'invoke' button. If there's a way to get around that i'll happily try that instead.
Hmm.. i think I found it, but i'll need to do some testing next year after the holidays to verify
I had added two text boxes (name and desc) to one of my worksheets. I was able to test connection/schedule and run a refresh once I had deleted them.
Weird, because o365 excel services had no problem displaying the worksheet containing the text boxes, but it looks like workbooks that contain text boxes don't work on a scheduled refresh
Jakub @ Adelaide, Australia Blog

Impossible to perform this operation because the document is incompatible with this version of Photoshop"

I encounter a problem that is increasingly recurring, at the opening of a PDS Photoshop CC.
After working on a file and then close Register one, he can not open and displays a incompatibility message me with the same software that I was used to create it.
I work on a PC with Photoshop CC, but the same problem has occurred on a Mac with Photoshop CS5.
Yet I shall endeavor to select "maximize compatibility" every time the question is asked me.
Anyone know it and the problem (we can always dream) how to recover the files in question?

Thanks for you help.
First i was trying to save on a shared cloud. Later, i save my files on an internal hard drive and then copy them on the cloud, but when i, or the persons that access the folder on the cloud, try to re-open the file there, the problem is coming back.

'Service this device' gets 'Unable to perform the operation' Deskjet 6940

Installing this software on several different XP SP2 boxes. The install does fine (although very long) and I can print to the printer. However, when I go to the printer properties and select Preferences and the Services tab, I click the "Service this device" icon and get only "Unable to perform this operation". I get the same results on 3 different computers. I tried installing the software from the CD, both USB connected and network connected. I also downloaded the latest s'ware from the HP site and got the same results.
Any ideas here? Without this function I have no way to clean the print heads and such later on, even though the printing works OK.
The only reference I could find previously by searching said that it happens when running the Firefox browser. I'm not doing that.

After i've set Internet Explorer as default browser it Works !
What a strange solution

When I try to sync my IPOD (3rd gen) on ITunes, I receive the following error message - you don't have enough access permissions to perform this operation

When I try to sync my IPOD (3rd gen) on ITunes, I receive the following error message - you don't have enough access permissions to perform this operation..can anyone assist?

See:
iPhone - not enough access privileges: Apple Support Communities

Sync problem: "don't have enough access privileges to perform this operation

I'm trying to sync a new ipod touch to my mac; it's my son's ipod but I don't know if that has anything to do with this problem. Every time I try to sync I get an error message saying "The ipod cannot by synced. You do not have enough access privileges to perform this operation." What is this about? How can I solve this problem?

The newest iPod touch model requires OS 10.5 Leopard.

"changes to the distribution list membership cannot be saved. you do not have sufficient permission to perform this operation on this object"

Running Exchange 2010/latest updates on Windows 2008 R2 servers.
When I create a new DL that I want someone to manage, they received the following message when trying to add/remove from the DL:
"changes to the distribution list membership cannot be saved. you do not have sufficient permission to perform this operation on this object"
I have followed everything in "http://msexchangeteam.com/archive/2009/11/18/453251.aspx" with no luck
Any suggestions?

Piggybacking off of the discussion above, with our deployment of Exchange 2007, we created a set of web-based tools that allowed people to create Exchange Resources including distribution lists. To allow multiple people to manage the lists for a given
department, we programmatically created a group, which is populated with one or more users from the "resource department". We then set the following AD permissions to allow members of the group to manage membership of departmental distribution lists:
Add-ADPermission -User DepartmentalGroup -AccessRights ReadProperty, WriteProperty -Properties 'Member' -DomainController dc.contoso.com
Fast forward to Exchange 2010 and the landscape has changed with Exchange 2010's implementation of Role Based Access Control and I'm struggling to come up with a way to programmatically allow a group of users to manage distribution list membership for a
subset of distribution lists - note that we have approximately 75 departments, with each having its own set of coordinators who should be able to manage distribution lists for their department but not lists created by other departments. The specific
error we receive in Outlook when attempting to modify group membership is the same as the title of this thread - "Changes to the distribution list membership cannot be saved. You do not have sufficient permission to perform this operation on this object".
I implemented the settings referred to at
http://sysadmin-talk.org/2010/06/omg-allowing-end-users-to-manage-distribution-group-membership-in-exchange-2010-2/ which details the process of creating a new management role and revoking the role's ability to create new distribution lists and remove distribution
lists (which we want because we want those actions to be performed using our web tools).
All that to say that the ultimate problem we have is that the above relies on the "ManagedBy" field of a distribution list (viewable by Get-DistributionList Listname | fl *ManagedBy*) to determine group ownership. When "ManagedBy" is set to a user,
the user CAN edit a distribution list's membership from Outlook and OWA. When "ManagedBy" is set to a group, members of the group are UNABLE to edit the membership of the distribution list via Outlook or Outlook Web Access/ECP. Furthermore,
Set-DistributionGroup does not allow you to specify a list of users to assign to the ManagedBy field. However, if "ManagedBy" was set to a specific user and that user logs in to the Exchange Control Panel and adds additional "owners" of the distribution
list, which I can then see from EMS - both the original owner and any additional owners added can in turn modify group membership for the list using Outlook or Outlook Web Access/ECP.
My questions:
1) Is it "expected" behavior that while I can assign a group to the "ManagedBy" property of distribution list, members of that group are still unable to edit the group membership? ...or is there a fix for the behavior I'm seeing?
2) Can multiple values be assigned to the "ManagedBy" property when using Set-DistributionList - ex: Set-DistributionList DLName -ManagedBy:user1,user2
3) Any other suggestions?
Thanks,
-Lance

Unable to complete this operation error

Hi,
I installed Firefox 4 and when I go to my HP printer properties and click on Printer Services I get "Unable to complete this Operation" error. If I uninstall Firefox it works fine. When I reinstall Firefox I get the same error. Any help would be appreciated because I would like to use Firefox.
Thanks,
Phil

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

NOKIA E90: UNABLE TO PERFORM BLUETOOTH OPERATION

Hi guys,
It's two weeks since, I'm having problems with my Nokia E90 mobile phone: when I try to activate my bluetooth, after a few seconds I receive the message "Unable to perform bluetooth operation", but this doesn't work in this way permanently because some times works and some times doesn't work, it occurs trying to connect to my vehicle free-hands device or even just activating bluetooth.
I can't understand what's happening because til now my bluetooth device worked fine.
So, could anybody help me? because now I'm working with my USB connection, but this is not very operative.
Thanks in advance!!!

01-Jun-2008 02:26 PM
erikpost wrote:
Exactly the same problem over here:
-FW 210.34.75 newly installed
-No paired devices listed
-Device is set visible
When trying to switch on Bluetooth, the error message above keeps appearing.
Reset to factory settings (using *#7370#) doesn't give any improvement.
In short: BT has become useless after the FW update.
Any suggestions to resolve this problem will be greatly appreciated.
Thanks in advance,
Erik
i heard the 210 sw is only a beta software and is for testing only... it could be causing you the problem...

Outlook 2010 you don't have appropriate permission to perform this operation.

I have a user who when they go to File > Open > Open Outlook data file they get an error "you don’t have appropriate permission to perform this operation. " I've completed the following troubleshooting steps: 1) Repaired Office, 2) Created
a new Windows Profile, 3) Created a new Outlook Profile, 4) Elevated user rights to an admin, 4) Re-installed Office 2010 5) Confirmed there is no GPO or registry setting preventing me from selecting this option. This is on a Windows XP SP3
machine with Office 2010.

I have the same problem as CTDHelpdesk and have been unable to find an answer anywhere. Immediately after choosing "Open Outlook Data File" Outlook 2013 (Win7) moves to the Outlook Today view and issues the popup "You don't have appropriate permission
to perform this operation". NB this is before any file selection dialog appears, so it could not relate to any particular data file or location, as none has been selected.
I have previously opened these data files in this version of Outlook 2013, and I can't think of anything that might have changed. In fact, inconveniently, while trying to fix this problem I closed two open PST files that I use frequently and now can't
reopen them because of this error.
I've tried step (c) above. (a) and (b) don't apply because I can't even select a PST file. I've also tried "Run as Administrator".

Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

Hello,
I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template.
So, I now want to try and update my service template. However, whenever I try to do anything with it, in the services section, I receive the error:
Unable to perform the job because one or more of the selected objects are locked by another job. To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object. ID 2606
Well I tried that and there doesn’t seem to be a job locking the object. Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all. I tried running the following query in SQL:
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
Can anyone help?

No one else had this?

Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)

Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng

"Unable to perform this operation because No enough ram"? Insolent!

Similar Messages

Maybe you are looking for