Unable to pick release the order.......

Hi!!!!
I am new to oracle apps,
I am unable to pick release, the status is showing in shipping transactions is showing as backordered, but the availability of the item is adequate enough.......
Kindly help..... and advice....
Regards

Welcome to the forum.
This is a common issue. Please search the thread for similar question.
The following thread lists a lot of culprits
Backorder although on-hand quantity exists
Also check the following on metalink
LINE STATUS 'BACKORDERED' AFTER PICK RELEASE ALTHOUGH SUFFICIENT QUANTITY AVAIL [ID 378240.1]
FAQ: Troubleshooting Stuck Pick Release and Shipping Transactions [ID 863761.1]
Reserved Sales Order Lines Getting Backordered While Picking or Shipping [ID 390683.1]
Hope this helps,
Sandeep Gandhi

Similar Messages

  • Not be able to pick release the sales order

    Hi Gurus,
    I am trying to release the order but the status of the order becomes back ordered even sufficient on hand is available in the respective sub inventory and period is also open.
    Please help me in this issue.
    Regards
    Ranvijay

    pls don't post duplicates
    Not be able to pick release the sales order

  • Unable to pick up the file from Receive Location

    BizTalk is  unable to pick up the files from receive location.
    My admin console is working so slow.
    It is showing the problem of snap-in as follows:
    I have checked all my receive location and its masking,it is working fine.
    Actually it is working fine in dev server(snap-in problem is not occuring in dev server ) but when I import MSI and binding in UAT server.
    It is not picking up the file from receive location.
    I want to know one more thing :if my message box database is not working fine,will it receive the files from receive location.
    Prakash

    For files not received by receive location. If the Receive Location is still enabled but files are not processed by Receive Location, then check whether the host instance  configured with your receive location is running. If the host instance is in
    running state, restart the host instance and try.
    Regarding the error in the admin console as shown in the image, people started to see this issue with admin console from BizTalk 2009 onwards. This happens in cases like you have done some activity with console and before its been refreshed it you do more
    activities like expanding the node you will see this error. Sometimes WMI is bit slowly to refresh your admin console screen. Just wait for few seconds untill the WMI screen is rendered completely. Ensure you have all the cumulative updates installed for your
    version of BizTalk and also ensure the service pack for your OS is updated.
    Obviously if message box is not working, files will not be received/processed. But if message box is not in healthy state this would affect all other application not just one and in-fact it would affect entire BizTalk not just Receive Locations.
    To start analysing this file not been processed by Receive Location, start with checking the host instance as mentioned.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • How to Release the order  while creating an order?

    Hi
      My requirement is to create an order and release(REL) it immediately upon creation.I have created an RFC FM wherein which I am calling the Bapi 'BAPI_ALM_ORDER_MAINTAIN' to create an order.
    Following method I have tried to release the order, but still my purpose not resolved completely.
    Creted the 'RELEASE' method in the BAPI call upon creation of order, but it throws a BAPI error.
    I tried  with FM 'STATUS_CHANGE_INTERN' in the BADI of an order to release it. It does release the order. But the problem is afer the order is created and released by BAPI & BADI, I could still see the Green Flag(Release) in 'Iw 32' though system status changed to 'REL' Status. on Top of it , I could still observe the Creted Status(CRTD) system status in the order. Actually once the order is Release(REL), created status(CRTD) should not be displayed .
    What would be the best approach to acheive the result?.Appreciate your valuable reply on this regards.
    Regards
    sri-

    Hi,
    Try this..
    Create a new RFC function module in SE37 with the same parameters as the FM ALM_ME_ORDER_RELEASE
    In the attributes of the new FM set the radio button "REMOTE ENABLED"
    Then call the FM ALM_ME_ORDER_RELEASE inside your new FM..
    Generate ..
    Then call this new FM in your user exit...with IN BACKGROUND TASK.
      CALL FUNCTION 'Z_ALM_ORDER_RELEASE'
                   IN BACKGROUND TASK.
    Hope this works..
    Thanks,
    Naren

  • After releasing the order same screen user updating the quantity in process order  in sap pp

    Hi experts,
    After releasing the order in the same screen user updating the quantity in process order  in sap pp.
    How to control it.
    can any help in this regards
    Thanking you,
    Rishit.

    Hi Rishit,
    You can control it by BAdi WORKORDER_UPDATE method AT_SAVE make error message if there is any change in quantity.
    Or you can create Transaction Variant through SHD0 for CO02 and make field Total Qty (CAUFVD-GAMNG) as output only.
    Regards,
    R.Brahmankar

  • Transaction code to unblock / release the order for delivery / billing

    There is "Delivery Block" and "Billing Block" fields at the header data of VA01. What is the transaction code to unblock / release the order for delivery / billing?
    Thanks in advance.

    Go to VA02 and made this field blank.
    Sometimes what happens, release of that field can only be done by authorised personnel. In that case you ahve to ask them to unblock.
    Thanks and Regards
    Pratyush

  • Release the order on operation level

    Hi,
    Currently we are releasing the complete production order. But Now we want to release the order operation by operation. How can we do that?
    Regards
    deepak sharma

    Hi Deepak,
    I think that you have already realesed the order at header level and now you want to realese the production order at operation level. If this is correct,then follow step as below.
    1.Goto CO02
    2.Select Function,then Read PP master data.continue,enter & save. So status of order will be changed to created.
    3. Now follow the step given by SAP PP consultant.
    Hope this help you.
    Regards,
    Raja.

  • Set deletion flag for Order before releasing the order

    Hi all,
    can we set the Deletion Flag for an order before release of that order.
    Regards,
    Bhanu.

    Hi,
    You can lock and unlock order without releasing.
    In case of Un execute we can not release order further.
    Path:
    ORDER-FUNCTION-LOCK
    order-function-unlock
    Regards,
    Sudhakar

  • Can't pick release a sales order..

    Dear Friend's,
    I am a student and while practising on my home instance, i am running into numerous errors..
    Any help will be much appreciated..
    After creating an order, and booking it I go to pick release to pick release the order and I get an acknowledge note that the order has been released successfully. But when I go to ship confirm I see the order status in the line status as ready to release instead of staged/pick confirmed.
    I have tried doing the same for back to back orders & drop ship orders. And the results are the same. The line status always shows ready to release. I am unable to pick release my orders.
    I have changed users & tried different users. And I have shut down my instance and restarted it. But the results are the same. What could i do? Have i changed some setting options by mistake? Or is this something routine?
    Thanking you,
    Vijay Jaisinghani.

    Arif,
    Thanks for looking in.
    I checked and made sure the periods were open, and i have stocks as well.
    It's a vision instance, R12.1.1.
    It says Pick release, even after i pick release the line..
    I haven't worked on the instance in the last few day's. Will try something different today and see.
    Perhaps, create my own item and then try booking and releasing the order..
    Thanks again for your time and effort..
    Regards,
    Vijay

  • API to pick release a sales order

    Hi All,
    I have a requirement of picke releasing a sales Order from back-end.
    I have the order in the booked status, In my pick release program I am calling the program to generated the batch id by calling the package WSH_PICKING_BATCHES_PKG.Insert_Row(), and then release the batch by calling
    WSH_PICK_LIST.release_batch(), but the order is not pick release.
    I found out that WSH_PICKING_BATCHES_PKG.Insert_Row(), generates a batch id but it is not inserting data into the table WSH_PICKING_BATCHES, I dont know why. Can anyone help in this regard as to where the problem might or what other API's if they exist can be used to pick release the order.
    Any method of pick releasing suggested will be highly appreciated.
    I am in 11.5.9 and we dont have the patch 3438823 applied in our system.
    Thanks
    Ashwini

    we are using these 2 APIs, it works.
    apps.wsh_picking_batches_pub.create_batch
    and
    apps.wsh_picking_batches_pub.release_Batch

  • How to use Pick Release Rule  while doing pick relase from API.

    Hi All,
    I need to Pick Release the Order based on pick release rule through and API. I am using WSH_DELIVERY_PUB to do Pick release/confirm.
    I did not find any parameter in the API which allows to use Picking rules for Pick Release.
    Is there any way we can do the PICK RELEASE using Picking Rule through APIs.
    Any information on this will be appreciated.
    Thanks
    Sreenivasa Gurani.

    Hi Srini,
    You need to use WSH_PICK_LIST.RELEASE_BATCH API, this one has two parameters
    1. p_batch_id -- Get it from WSH_DELIVERY_DETAILS tables
    2. p_log_level -- Not requires
    Or
    By Using this API you create the Batch
    WSH_PICKING_BATCHES_PUB.CREATE_BATCH -- This API Returns Batch id
    use this batch_id for WSH_PICK_LIST.RELEASE_BATCH
    Thanks
    Reddy

  • Stop Pick Release

    Hello All,
    I have multiple sales orders on an item, which have been booked. Now the item is found defective and it is stopped from production. How do we stop the item from being Pick Released during the Pick-Release Sales order process ?

    Hi,
    You can achieve this in following ways...
    1) Mark the item as discontinued item in Item attribute.. or
    2) Make onhand QTY of this Item as zero..when you try to pick release the order will be back ordered due to insufficient stock
    3) Remove the item from Organization assignment
    Hope this will help..
    Regards,
    S.P DASH

  • Unable to restrict the Release of order when the Stocks are deficit.

    Hi gurus,
    i have a packing material for which the stocks are deficit when i checked in MMBE.
    While releasing the order the material is picking the stock from some where and is not restricting the Release of order. The same case is working fine with other materials as well.i.e when there is a deficit of stock then the release is Rejecting for all the materials except for this packing material.
    Thanks for your understanding.
    Naveen.A

    Hi,
    Please check the below mentioned points
    1.Material Master  MRP View : (View 2 or 3, i dont remember) You had maintained the proper Checking Group (Say 02)
    2. OPJJ: If you are using standard Checking Rule "PP" for the combination of the Checking Group and Checking Rule PP, make sure that scope is defined properly. Generally receipts from PR would be out of scope.
    3. OPJK : Make sure "you had NOT checked "No Check" for Material Availability.
    4.OPJK: The checking Rule is the right one (PP in Standard)
    5. OPJK : For the order type you use, the Plant  and business function 2combination check if you had set "3 -  No release if Parts are missing"  for the  field "Release Material"
    Thanks
    Bala

  • Sales Order not getting Pick Release and getting BACKORDERED

    Hi Gurus,
    There is an order in oracle production. When user try to Pick Release this order the order is not getting picked instead it is getting backordered. The line quantities are available and it is also not in hold. I also see the log files of ‘Pick Slip Generation report’, but it shows no error message. Do you have any idea on this?
    Thanks,
    SamD

    Are the quantities in a reservable subinventory?
    If you go to material workbench, does the quantity show as available to reserve?
    Did you specify a subinventory in the release process?
    Does the sales order line have a subinventory on it?
    Check if your onhand is in staging subinventory?
    Check older threads on this issue such as http://kr.forums.oracle.com/forums/thread.jspa?threadID=603998
    Sandeep Gandhi

  • Sap pp-releasing the production order?

    at are the activities carried out while releasing the production order?

    Hi,
    Order Release
    Use
    A production order must be released, before it can be processed. You can use the time period between creating and releasing a production order, for example, to carry out company checks and preparations. If you do not require this time period, you can automatically release the production order when it is created (see Automatic Release).
    A newly created production order initially receives the status CRTD (created). The following restrictions apply to a production order that has been created:
    Confirmations for the order cannot yet be executed.
    Shop floor papers cannot be printed.
    Goods movements for the order cannot yet be executed.
    Releasing the order lifts these restrictions.
    Features
    Order release can be executed at the following levels:
    With Release at Order Header Level all operations are released. The order and the operations receive the status REL (released).
    With Release of an Operation the operation receives the status REL and the order receives the status PREL (partially released). If all operations in an order have been released, the order has the status REL.
    Hope this helps.
    Revert if you need more information.
    Regards,
    Tejas

Maybe you are looking for