Unable to place voice calls or send SMS when Messa...

The phone is a T-Mobile branded N95 with FW 14.0.0.1. I installed the Nokia Messaging client from the web site email.nokia.com, about 1 week ago.
If the messaging client is active (in the foreground, or in the background, or synchronisation turned on), my phone will refuse place calls after a while. It will also refuse to send an SMS at that point. Exiting the messaging client (completely, turning off synchronisation) will solve the problem, but the entire point of push-mail is to receive mail at any time.
The error that occurs during call setup (voice call) is "Verbindungsfehler", meaning "Connection Error". The messaging client continues to work fine in the background.

I would speculate that there is a bug in the FW. I was able to reproduce the problem by leaving the browser online for a while.
Since I received no help what-so-ever from T-Mobile or Nokia, I decided to change the product code to a generic Europe-1 and install the real latest firmware (31.something). That firmware seems to have resolved the problems I was seeing.

Similar Messages

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messages. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles. Any idea how to fix the problem?

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?

I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

Unable to place video calls using CUPC or the IP hardphones.

Hi,
We have installed CUVA 2.1.1 software and the VT-II camera installed perfectly fine.CUCM version 6.0 and Presence 6.0.1
Also get the camera Icon on the IP hard phones as well.But unable to place video calls video calls both with CUPC clients and IP hard phones locally on LAN.
Able to launch and see the local and remote image as same on my own system.
Any thing else that I would need to check or missed out any checklist ????
Regards,
Shams

Hi CJ,
Thanks for the info actually the problem is locally I am not able to place video calls.
When I click on the video check option both the local and remote image are the same as the local image.
Please suggest for placing local video calls within a single cluster what all needs to be checked.
Here we are trying to place video calls IP hard phone to IP hard phone,CUPC to CUPC ,
IPC to IPc.
Regards,
Shams

Unable to listen voice call

hi,
I have format my Blackberry9790, but after format I am unable to lsiten voice call, over speaker convercation is clear but without speaker not able to listen voice of person calling to me.
Please help

Hi @sukendra!
Great to hear your issue is resolved. Welcome to the Forums!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

New iPhone 5 just started being unable to place/receive calls

My iPhone 5 just started being unable to place (says call failed) or receive calls. Cellular data works as do texts. Called ATT, can't figure it out on their end.

I just went to the Apple Store and their solution was to replace my phone.

Looking for some app which send SMS when there is Sim change in Iphone 4 G. Do we have any such software which is free

looking for some app which send SMS when there is Sim change in Iphone 4 G. Do we have any such software which is free or even paid will work.

I thought that is what the big deal was that people did not know until they opened the box and started using the iPhone 5, that it not only worked with one carrier but several carriers. I did not say it will work with any carrier at one time. I was trying to find out the reason for this and why people were so surprised that the iPhone 5 had this function and the reason for it. As stated in my post, is it there so that after your contract is up and you want to go to another carrier you do not have to purchase a new iPhone, you cna purchase a SIM card that works with your new carrier.
The Otterbox Defender has a tendency to let too much dirt, dust, etc. in the cracks on the case. At least this has been my expereince. I was thinking something more along some of the really durable cases at BallisticCaseCo.com
As far as the iPhone 5 having issues, I have heard that there were more than usual with the first couple of manufactured batches that were shipped. For example the Map App by Apple, the scratches on the backside of hundreds of iPhones, etc. I am hoping these will get to be less and less, but with the recent riot at the one plant in China where the iPhone 5 is assembled is supposed to increase the waiting time.

My iPhone 4s has been very tempremental with making calls and sending SMS. It seems to work better if my 3G is on all the time. Anyone else experiencing this?

My iPhone 4s is very tempremental. One day it's fine, the next I find it hasn't recieved calls or texts that have been sent to me and it won't make calls or send texts either! I've found that if 3G is turned on it seems to help but do I really need to have 3G on all the time?

How are you turning off 3G? If you are putting it in Airplane mode this is why you haven't received any calls or texts, they both run on voice data which you turned off.

Just unlocked Blackberry Curve 8520 with online code, now cannot make calls or send sms! PLEASE HELP!

Hi,
I unlocked my phone about an hour ago using a legitimate unlock code from unlocks.co.uk. I entered the code and it seemed to work fine and now my network shows up as Vodafone uk (I have unlocked it from T-Mobile)
It looks as though it is unlocked and I have checked the connections - I have signal and it says I am connected to the vodafone network, however, I cannot make any calls or send texts! If I try to call a number I get the call failed signed and the failed call dial tone. I tried to send a text but it didn't work - the text now has a red X and says 'unidentified subscriber'. I know this is a fault with my phone as the people I have tried to text and call have no problems with their phones/networks.
Please somebody help me! I have no idea what to do! I contacted the unlocking company and they say if I'm sure the sim I'm inserting is active (which I am) then it is likely my phone has been blacklisted, but I dont think it has. I bought it as a pay as you go handset from Argos just a week ago and it's been working fine until then.
I put my old t-mobile sim back in and it seems to work - does this mean it hasn't been unlocked successfully or not?
Many thanks

Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
Then try your Vodafone SIM again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cannot send SMS when VoLTE is enabled (iPhone 6 AT&T)

My iPhone 6 on AT&T will not send SMS text messages unless I go to Settings > Cellular > Enable LTE > and change "Voice & Data" to "Data Only". When I have VoLTE enabled I cannot send any SMS. iMessage still works regardless.
I took the phone to AT&T thinking it was a SIM card issue and they told me it was an Apple hardware issue. I took the phone to Apple and they said it was an AT&T network issue.
Anyone else experiencing this bug?

SMS and cellular data is a carrier feature.
Take the phone back to AT&T and talk to someone higher up.

Send SMS when Device is Locked.

Hi All,
As Services in android,is there anything similar in Windows phone 8.x?
I want to schedule a task,which can send message when my device is locked from background.Or i want to schedule a task for particular time to send message to my friend on his birthday.
Please help me out,is there any possibility in windows phone to do this.
Thanks in Adv.

Windows Phone does not provide a public API that allows you to send SMS without user interaction and a background task cannot call an API which require user interaction*. (*except for Toast notification.)
However, you could write a resource intensive background task to call some web service that sends an SMS.
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

'Confirm before sending SMS' when enter key is pre...

Many will agree with me,
While creating SMS we press 'Enter key' for next line, and then we realise that incomplete SMS has been sent and we got charged for it.
There should be checkbox in Skype's Settings/Preferences for Messegeing:
[√] "Confirm before sending SMS"
Please push this feature if you agree with me.
Thanks,
Nitin

The text of the submit button is transmitted to tell you which submit button was clicked, so naturally it doesn't send it if you don't click that button.
The usual trick is to create an field like <INPUT TYPE="hidden" id="actionfield" name="action" value="enter">
When an element that causes a submit, like clicking a button, happens then Javascript sets the value of the field to indicate the entry method. e.g.
onClick="document.getElementById('actionField').value='ok'; return true"
Obviously if the submit occurs due to hitting ENTER the action parameter will be "enter".
Actually few forms use submit buttons these days because they look a bit clunky, most use images for buttons and power them with JavaScript.

Send sms when bi process chain failed

Hi SAP Gurus,
Is some one inform me how is it possible to send an SMS when a process chain failed ?
Is there a possibility to paramter something on the SAP BI system to execute this action ?
Thanks

Hi,
I dont think there is an SMS option . But an email can be send when a Process chain gets failed. The detail step for this is
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. In RSPC, take the required process chain
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards
Lekshmi

I have an ipad mini 16G wifi - why can't I send SMS txt msg and only imessages? On the settings, there is no option for "send SMS when imessage not available" like on my iphone.

Why can't I send SMS messages from my ipad mini 16g wifi?

Even when your iPad Mini has a 3G cellular modem onboard, the iPad Mini still can NOT send or receive SMS Text messages.
The 3G modem is only used for a internet data connection and has no software to either send or receive SMS text messages even though the hardware is available.
I can confirm this with the iPad Mini iOS6.1 with 3G cellular modem.
Apple Support has this issue currenlty under investigation - you can follow this issue here:
Ipad Mini with 3G prepaid internet.

My iPhone from SPRINT cannot send SMS when Outside US

I buy the Sprint iPhone in the U.S., at the Apple store, stating you were asked to thoroughly sellers use outside the United States is not?
I can't send SMS using SIM in Vietnam with the network ...
I can't active imessage & facetime and not work 3G EGDE
iphone about:
model: MD656LL
serial: F17JKA3F8GH
IMEI: 990002305085563
MEID: 99000230508556
I Try this steps not working:
Reset Content and All Setting.
Using MMS.
Disable iMessage.
Changing SMSC number.
Please Help, thanks

Frist i am going to ask that this post is edited for your safety. YOU shouldnt post your meid and serial number ect. Second you would want to talk to the carrier because your on a carrier network that isnt normal a supported carrier.

Why unable to make voice call & send stickers

NOKIA ASHA 311
LINE IS AVAILABLE FOR ASHA SERIOUS BUT STILL CANT MAKE CALLS & LIMITED STICKERS, NO STICKERS SHOP....
HIKE IS AVAILABLE BUT UNABLE TO SEND STICKERS....
WECHAT AVAILABLE BUT UNABLE TO SEND STICKERS & LACKS ALL FEATURES....
VIBER IS AVAILABLE BUT NO USE ONLY MESSAGE...
SKYPE IS NOT AVAILABLE IF AVAILABLE ALSO NO USE.,/
WHY THIS?

palani6 wrote:
NOKIA ASHA 311
LINE IS AVAILABLE FOR ASHA SERIOUS BUT STILL CANT MAKE CALLS & LIMITED STICKERS, NO STICKERS SHOP....
The application has recently been updated with new features such as new stickers.
For WeChat, Viber, and Skype we believe that the developers of the said applications are striving hard to bring new features to enhance the user experience on the Series 40/Asha platform.

Unable to place voice calls or send SMS when Messa...

Similar Messages

Maybe you are looking for