Unable to play Content in Content Player: Proxy Authentication req

Hi All,
I have my repository manager
(LSOContent) created in portal.
I am able to upload content through
portal and also through Authoring
Environment.But when I try to play the
content in portal.
It shows the error.
Caused by com.sap.hcm.is.shared.repository.access.RepIOException: Error with Object: /LNetname/v1/IooMapping.txt, Http Error 407:Proxy Authentication Required
Also when I try to check the content
player configurations thru the url
http://sapepdev.intra.sasref.com.sa:500
00/lms/mediator/config
The check shows succesful to R3 but
says not ok to repository.
This is strange to me.
I even checked in Component
Monitoring,my repository manager does
not show any error and shows green.
I even tried with the sap standard
repository documents with the url
http://sapepdev.intra.sasref.com.sa:500
00/irj/go/km/docs/documents
Even for the standard one the check
shows NOT OK.
Could anyone please give an idea as what might be wrong here?
Thanks for the help
Regards,
Santhosh

I managed to solve this issue
I replaced FQDN of hostname to localhost as my Master Repository and content player are running on the same machine.
Regards,
Santhosh

Similar Messages

  • UNable to play content error on music and videos

    I have an 8330, and I recently begun getting an "Unable to play content" error when I try to play musi or a video.  I first noticed it after recieving the following error message when I turn on my phone, so I figure they are related.
    "Uncaught exception: A  browser content provider for audio/mid MIME type has already been registered with the browser"
    Any ideas on what is wrong or how to fix it?

    UPDATE !!
    SOLUTION: Uninstall What´s App and warm reboot!
    Perroso

  • Unable to Play content on ipod nano

    I have an iPod nano 5th generation. I listened to radio for the first time (which may or may not be relevant to my current problem). I am able to still listen to the radio, but none of the content stored on my ipod will now play - either with earphones (Itried a few different ones), or over speakers, or by the internal speaker.  I've reset it and that did not help. Any help would be most appreciated!

    What happens when you try to play content stored on the device? How did you reset it?
    Have you done a full restore in iTunes yet to try and resolve the problem?
    Restoring iPod to factory settings
    B-rock

  • Is LSO content player on an independent server?

    We try to install/configure LSO.  When it comes to the content player, we are not sure whether it is an add-on to ERP or EP.
    Would you please explain ? Thanks!

    Hi,
    The Content Player (LSOCP), is based on a Java Platform, so you have to install it and configure in your SAP J2EE Engine.
    Depending on your ERP version (i suppose 6.0.X), you have to install the corresponding version;
    - LSOCP 600 (no EHPs)
    - LSOCP 602 (With EHP2)
    - LSOCP 604 (With EHP4)
    Follow this thread to solve some issues after installation:
    Unable to play content in LSO Content Player.
    Regards!

  • Unable to locate the LMS's API Implementation-Error in Content Player

    Dear Guys,
    when I am playing the content in content player of Authering environment we get the following error "Unable to locate the LMS's API Implementation" ,
    Should any API be implemented explicitly?
    How can we resolve this error?
    Regards,
    Shamila.

    Hi Shamila!
    As I mentioned, you need to consult your content developer to debug this issue. In the course content(i.e. flash file) there are references to the SCORM API. These when imported in to AE loose the reference. For instance, if you have something like this .. parent.api.<some scrom function> and the parent (window or frame) has the SCORM API. This reference might be getting broken when the course package is imported in to AE. The content developer need to make changes in the code to ensure the reference to the API is changed.
    Please let me know if you require further guidance on this.
    Regards,
    Ravi Sekhar

  • Firefox Divx Web Player - Buffering 0%, Divx Web Player it prompts "Buffering: 0%" without ever playing content.

    Issue Description:
    For as long as I can remember I've been unable to play videos using the DivX Web Player. The video appears and connects however it prompts "Buffering: 0%" without ever streaming anything. I've tried to resolve the issue by uninstalling Firefox, Shark007's Codec Pack, DivX Web Player, and Firefox Addons and having them re-installed with no luck. These videos do not work in Chrome either however they do work in Internet Explorer. DivX Avi formats do play on my desktop using Windows Media Player and the DivX Plus Player.
    Example:
    url: http://labs.divx.com/Webplayer does not work.
    Operating System:
    Windows 7
    Processor:
    Intel® Pentium ® D CPU 2.80GHZ
    Installed Memory (RAM):
    1.00 GB
    System Type:
    32-bit Operating System
    Mozilla Firefox:
    Version 3.6.6
    Divx Plus Web Player:
    Version 2.0.2.40
    Video Card:
    NVIDIA GeForce 7300 GS
    Screenshot Example: http://imageshack.us'>ImageShack.us
    == URL of affected sites ==
    http://labs.divx.com/Webplayer

    Hi everyone,
    Since it is currently not possible to play divx content using the newest version of the divx web player, I've been using the VLC media player browser plugin. The VLC browser plugin allows you to play divx content on the web; however, it does not load in the same manner as a traditional divx web player. To use it, you need to double click the video and move it into full screen.

  • My iMac is authorised to play iTunes content, but my Apple TV keeps asking for me to authorise. I am unable to view content from my iTunes Library. How can I convince my Apple TV that I am authorised?

    My iMac is authorised to play iTunes content, but my Apple TV keeps asking for me to authorise and I am unable to view content from my iTunes Library. How can I convince my Apple TV that I am authorised?

    I am not exactly sure what you mean by "authorised", but I am experiencing a similar problem...or the same, in that Apple TV keeps telling me to enable home sharing in my MacBook Pro. It does not seem to recognize that home sharing is already enabled on my Laptop.
    Is home sharing and "authorised" one in the same? It used to work just fine before these recent Apple TV updates.
    Apple TV, Mac OS X (10.7.2)

  • Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

    I'm unable to access content on my iPod Classic while it is connected to iTunes.
    The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
    I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!! 
    I just downloaded the iTunes program.
    Very confused, pleaseee help ...

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Some of the content in my Itunes library has the "!" next to them and is unable to play the songs as it says the source is no longer available

    Some of the content in my Itunes library has the "!" next to them and is unable to play the songs as it says the source is no longer available, yet on an old Ipod the same tracks are available and play fine?
    I would love to know how to consolidate all my music and be able to play it without one device saying they are unavailable yet another device says they are?
    Also how obsurd is it for Apple to charge for supporting their devices! Or is that just me?

    Welcome to the Apple Community.
    Have you tried using spotlight.

  • Do I need to download a DNLA server to play contents of my iMac on my TV through a blue ray player?

    Do I need to download a DNLA server to play contents of my imac on my TV through a blue ray player?  I have Mountain Lion.

    No, but if you want to do this wirelessly or as Apple calls it, AirPlay, then you need a compatible iMac and an Apple TV or other compatible AirPlay device.
    Otherwise you can connect the two with a suitable cable.

  • I recently upgraded computer to windows 7.  When I open itunes I am able to see my music library, but unable to play.  Gives an error message of "Could not be found".  How do I retrieve my library contents?

    I recently upgraded computer to Windows 7.  When I open itunes I am able to see my music library, but unable to play.  Gives an error message of "Could not be found".  How do I retrieve my library contents?

    Hello ehoff5,
    I would be concerned too if I was not able to play my music in iTunes.  It sounds like the music files may be in a location that iTunes is not expecting.  I recommend reviewing the following articles to locate you music files on your computer:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/ts1408
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Playing content through Flash Player becomes hazy after sometime

    Hi,
    Recently I have been experiencing issues playing content through my Flash Player. After playing video content on sites such as Youtube for just a couple of hourse the Flash Player is not able to render the content rightly.
    I have tried clearing the cache in AppData but that doesnt work. Only rebooting the system works for a short while and even then after sometime the problem reoccurs.
    I am using a 32 bit Win7 system and the latest Flash Player 11.2.202.228 . It occurs on both Chrome and IE at the same time.
    Attaching the screencaps.
    Please help!

    Could you take a look at the following FAQ to see if any of the workarounds help you?  It also contains details on the information you'll need to provide to us so we can investigate further.
    How do I troubleshoot and report problems with Flash Player Video?

  • I am unable to play a rented movie's on my ATV 2. I get: An error occurred loading this content. Try again later.

    I am unable to play a rented movie on my ATV 2. I get: An error occurred loading this content. Try again later. My ISP has the TCP 80 port blocked but the TCP 443 port open. My first gen. Apple TV  is OK.

    Welcome to the Apple Community.
    I doubt port 80 is blocked, that port is used for http, which you might recognise as the basis for the world wide web.
    The message you get can be as a result of an extremely slow Internet connection, you can test your connection speed using speednet.com, however more commonly it's a simple error that can be corrected by unplugging and restarting the Apple TV and/or restarting the router.

  • Unable to view Content pane or playback buttons from play.exe

    After publishing Player files, I want to preview the Player output so I launched player.exe. It opens in Internet Explorer, and I can see and expand the modules and view the topic listing. However, I cannot see the Concept pages. All I get is a blank page. I also don't get the playback mode buttons, so I can't launch any topics. Double-clicking does not launch my default mode (Try It) either.
    When I tried viewing the same file from another computer, I can see them just fine, so I am pretty sure it's just my computer.
    Does anyone know what computer setting / internet explorer setting I need to change to be able to view the topics?
    As a side note, I am able to view UPK topics that are deployed on our server just fine. It's only when I try to launch the play.exe file locally on my machine.
    I'm using IE7.

    Hi - I posted the initial question back in November when I had my old machine. I thought it was just my computer since all my colleagues are able to see it just fine.
    Now I have a brand new computer - Windows 7 and IE 8, and I had high hopes that it was an isolated issue with my old laptop... but even with the new laptop, I am unable to see the Concept pane!
    I have not made any changes to my Internet Explorer setting. A colleague of mine with the exact same computer (and same setting - since it's provided by the company) can see the concept pane just fine. Because I can't see the concept pane, I am unable to play the UPK Player topics my computer.
    Does any body have any clue how to resolve this?
    I've tried changing the Zoom one user recommended, that did not work.
    I'm now on UPK 11.1 Client, Windows 7, IE8.
    Any suggestion is appreciated!!
    Thanks.

  • Embedded flash player is not working... Unable to play the streaming videos... Browser is hanging many times!!

    Hi,
    Pls help me to fix an issue with my playbook browser. The embedded flash player is not working... Unable to play the streaming videos... Browser is hanging many times. Restart done, cleared history etc.. Still doesn't work.
    Any help would be appreciated.
    Thanks.
    Solved!
    Go to Solution.

    Hello ak_kanan, 
    Welcome to the forums. 
    Try doing the following. In the browser swipe down from the top and choose Settings, now choose Content, here where it says Enable Flash change this to Off.  Now try going to the website that was not working (it will not work again this is fine) Once on the page swipe down from the top again and this time enable the Flash setting. Now reload the page and test to see if you have the same issue. 
    Let us know how you make out. 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for

  • ME59N as background job

    Hi Gurus, We want to have certain pruchase reqs automatically converted to POs via ME59N and we want to set it up as a background job. I will have filled certain fields on ME59N. How can this be acheived? Thanks Anusha

  • How to choose a specific port via Palimpsest?

    I found out today that Palimpsest Disk Utility can access remote harddrives via the SSH protocol. But Im not running SSH on my server via port 22. How do I choose a specific port?

  • Slate 500 Broken glass

    Hi, I have a HP Slate 500, this fall and broken the screen, not the LCD, just the glass, now the touch don't work anymore and had glass is broken at middle of screen. I need to replace this part, but HP don't give me support. Where I can buy this par

  • Invalid node name in Sun Cluster 3.1 installation

    Dear all, I need your advice in Sun Cluster 3.1 8/05 installation. My colleague was installing Sun Cluster 3.1 8/05 on 2 servers Sun Netra 440 that given hostname 01-in-01 and 01-in-02. But when he want to configuring the cluster, the problem occured

  • Mapping external resources

    I am trying to build a web application that would connect to different database upon different deployment. To get this done, i am using external resource mapping. My weblogic properties contains the following line: weblogic.jdbc.TXDataSource.wapayPrd