Unable to play HD quicktime movie in Quicktime. please help!
I have exported a sequence from my HD project in FCP as a quicktime movie. when i play try to play it on my laptop, however, it opens but doesn't play. instead, a dialogue window opens requesting me to download third party components. if i decline, then the playhead plays in the quicktime window but no video appears. please let me know what, if any components i need to download. an help is greatly appreciated. thanks.
You exported from FCP using codecs only available to that app.
Export using the H.264 video codec to view the file (in HD dimensions) on any (supported by hardware and CPU) computer with QuickTime version 7 installed.
Similar Messages
-
I am unable to play a rented movie on my ATV 2. I get: An error occurred loading this content. Try again later. My ISP has the TCP 80 port blocked but the TCP 443 port open. My first gen. Apple TV is OK.
Welcome to the Apple Community.
I doubt port 80 is blocked, that port is used for http, which you might recognise as the basis for the world wide web.
The message you get can be as a result of an extremely slow Internet connection, you can test your connection speed using speednet.com, however more commonly it's a simple error that can be corrected by unplugging and restarting the Apple TV and/or restarting the router. -
i am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help
Is reliance a supported carrier for the iPhone? If not, you will be unable to get facetime to activate.
-
i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
My airport on my macbook 2008 unibody disconnects and sometimes freezes mostly when I move laptop. Please help. OS 10.6.8
The sleep problem is a bug in 10.8. We have to wait for resolution.
-
I had an PC crash while backing-up my iPhone4, before installing iOs7.
Now I am unable to restore the iPhone.
Can anyone please help me!
Arjen RonhaarHey Arjen Ronhaar,
Thanks for the question. I understand you are experiencing issues updating your iPhone to iOS 7. If you have not already done so, you may want to restart or reset the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above steps do not resolve the issue, you'll want to restore your iPhone in recovery mode with iTunes:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
Hi. I forgot my passcode and now I am unable to unlock my ipod. I tried restoring it using itunes in recovery mode as well as dfu mode but it says unable to restore,unknown error occured (3004). Please help me out. My ipod is locked for one hour now.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
I downloaded music to my ipod shuffle from itunes and it still saying saying download music from itunes. But there is music on it when I hook it to the computer but it want play on the shuffle. Someone please help me.
Hello Rod2174,
I'm sorry to hear you are having issues with your iPod shuffle. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues transferring music to your iPod or playing music that is on your iPod, you may find the information and articles linked from the following page helpful:
iPod shuffle - Apple Support
Sincerely,
- Brenden -
Hi I m unable to upgrade ios5.1.1.. Please help when I click on install now and agree to t&c.. It say verifying updates and then it says unable to upgrade.. Please help
Read Here > https://discussions.apple.com/message/18449560#18449560
-
My ipod touch gets stuck on the same song, even after I uncheck the loop button. I am trying to play it in my 2007 vw with a power adapter that allows it to charge and play through my navigation unit. Please help. Thank you.
Yes, first try deleing both songs.
If still problem
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, ,make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
The new iTunes update gives me no option for a "share" tab on the side bar for me to play home shared music. why? please help i need to listen to beyonce!! plzzz
"share tab on the side bar ..."
iTunes has not had a sidebar for over a year. You can see one (as iTunes 10 used to show) by doing View > Show Sidebar from iTunes' menu.
But I'm not sure if that is your issue. You do not need a sidebar to do home sharing. Are you running the current iTunes (11.1.3)? Have you turned on sharing in Preferences? Have you done File > Turn on Home Sharing? -
Unable to play Quick Time movies in web pages
We have Quick Time 7.0.4 player installed on Mac OS X v10.4, But we are unable to open Quick time movies in web browser from external web sites.
It gives us error ‘To view this movie, you will need QuickTime 5 (or later)’
If we open Quick time movies from local disk in web browser then it works perfectly alright.
Could you please let us know the reason behind this?
Note: I have encounter this problem on safari and IE 5.2 browser.For instance if you go to this page again in Safari,
http://www.apple.com/quicktime/qtv/mwsf06/
and then select "View Source" from the View menu, then press command-f to "find" within the page and search for ".mov"
You will find this, which shows the url of the movie itself.
<param name="href" value="http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov">
If you copy just this part:
http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov
And open QuickTime Player, go to the File menu, select "Open URL" the movie will play.
If you try the same technique on the page at the link provided by your client, it will allow you to bypass the html code that may be doing an outdated compatibility check and the movie may play. Or it may tell you that you are missing components (codecs, compressors etc.) in which case, post here again. -
Error code 5103 "Unable to Play" with rental movies! Please help!!
I have a PC with Windows 7. iTunes 10.5.2. I purchased 2 rental movies and have downloaded them a few times now. But when I press "Play" I get the error code 5103 - Unable to Play. This has been going on for 2 weeks.
Please help!!!!All it says is to download the lasted vers in iTunes which I already have.
That's not true. It goes on to say:
"If you have the most recent version and are still unable to download your rental, you may be able to resolve your issue by removing the "SC Info" folder. To do so, follow these steps:"
... and then gives links to instructions on how to do so for your particular operating system. So best to proceed with the instructions for your operating system. -
Problem with installing the new iTunes and quicktime PLEASE HELP!
whenever i try to install iTunes 7 i keep getting this popup message. it has something to do with quicktime. please reply with any suggessions!! thank you.
quicktime for windows
could not open key:
HKEYLOCALMACHINE/Software/Classes/QuickTimeP
ayerLib.QuickTimePlayerApp/CLSID. Verifly that you
have sufficient accesss to that key, or contact your
support personnel.I have the exact same problem. Running Windows XP. Can't download the latest version of quicktime. Tried uninstalling old version of itunes and think I lost my entire music library. Did anybody solve your problem?
whenever i try to install iTunes 7 i keep getting
this popup message. it has something to do with
quicktime. please reply with any suggessions!! thank
you.
quicktime for windows
could not open key:
HKEYLOCALMACHINE/Software/Classes/QuickTimeP
ayerLib.QuickTimePlayerApp/CLSID. Verifly that you
have sufficient accesss to that key, or contact your
support personnel. -
50 fps is play to fast on time line , PLEASE HELP EMERGEANCY
Hi.
We has shooted yesterday on RED in 3K 50fps(slow motion)
When i play QT rpoxy files, its OK, but when i do Log&Transfer RED files in FC and then put them on timeline they play very fast! The FCP creat automaticly project with 25fps.I tryed to convert with REDRushes to ProRes422 files. And get same result.They play Ok in QuickTime but play fast on timeline when i drag them.Just one differece is- Proxy files dont play on time line(i get red line,- need to render),but converted qt files(ProRes) play with no prob on timeline(but very fast)
Ok, Of course i can do render proxy files in FC(Need Render),but he need 24hours for it.Bu i have not much time
What shoud i do?!!
Please help!
Thank you!Call your local user's group and see if someone with a much faster computer will come to your help. I don't think you can move forward until you render. Once rendered you should be able to change the speed of the clip to anything you want or need (modify - change speed - etc.). I hope someone who knows more than me responds, but that's all I can think of.
Goog luck,
corpguy -
Proprietary Kodak MOV Compression. Please help!!!!! Please
Im stuck you guys, Please help me. Im not a Noob, Ive been on the phone with support for Kodak, Quicktime....Ive been all over doom9, howard forums, here.....even made a post on myspace
Here is the deal put as simple as possible.
I have a Kodak EasyShare C340 Digital Camera. The camera Records and recognizes A proprietary Motion Jpeg A (mjpeg) MOV Format, with u-law 2:1, mono, 8000 khz audio.
My camera has an a/v output which is use to blow up its sd memory stored pictures/slideshows/videos onto a tv. I would like to convert and compress video files from my PC, Replicating that proprietary kodak mov compression, so i will be able to save my pc video files to my camera's sd memory and play the saved files through the camera's A/V output. You follow?
Again, ive been everywhere, and im not a noob. I have many converters and programs to do just about anything i would want to video and audio. I have Quicktime pro, super, Imtoo complete package, advanced x....to name a few. I know how to convert video. I understand format, codec, compression on an intermediate plus level. Im seeing most beginners having issues converting the cameras mov file to an avi (or something more component friendly) format, but i seem to be the only person who is trying to do the opposite.
Ive downloaded Gspot and video instector to identify the format/compression settings of the MOV files from my camera, but they are unrecognizable. Quicktime does however provide basic file info for these vids.
I have ripped Dvds, Xvid and divx Avis, dvr recorded Mpegs etc.....that I would like to be able to run on my camera. Ill convert these videos to MOV using the closest info i can find to replicate format settings that the camera would recognize and when i put the videos on my camera's sd card, the camera sees that there is a file but says it cant recognize it.
I have a Windows XP machine. I dont know where else to turn for Help. Please anyone. Someone has to have wanted to do this before.
Thanks in advance
P4 1.7 Custom Windows XP ProShould i copy this into the compression group?
Maybe you are looking for
-
Has anyone managed to get HP Warranty Information into SCCM?
Has anyone managed to get HP Warranty Information into SCCM? I have tried a few scripts that I found on the net but none of them seem to work as I believe HP updated there site this year..
-
Is a switch a better option for networking a Time Capsule?
My Internet service is a Cable Modem with a single LAN port. I use both a Time Capsule and a VOIP service (from Vonage). I am also a Mobile Me subscriber and use Back to My Mac. If I connect the devices in the order: Cable Modem -> Time Capsule -> Vo
-
Condition for interface determination
Dear all, I would like to choose a target inbound interface depending on values in a field. The problem is, that the source field has occurency 0...unbounded so that I check the same field twice. Example: /TestMessage/Field1 = "A" AND /TestMessage/Fi
-
Configuring Log4j within a Portal WAR
I'm having difficulty setting up log4j through commons-logging within my portal WAR project. I've put commons-logging.jar, and log4j.jar in my WEB-INF/lib directory and made sure my log4j.properties file is in the classpath. However, when I run the a
-
How to install a Savin 9965dp?
Does anyone know how to install a Savin 9965dp printer/copier in OS X 10.5.4? I tried installing it and when I print to it, it just prints a few lines of code and then a bunch of blank pages. There is a PPD installer on the Savin website, but I'm not