Unable to play my quick time files to other computers....

Dear folks,
I post again my problem. I have a quick time movie which I upload to a digital performer(music software)file, I write music based on the picture and then I bounce to quick time movie.
The new bounced file on my desktop is playing fine (by the way I have quick time 7.5.5. pro). I transfer it to my memory stick (travel drive) and I am trying to play the file to other computers but I get only sound, not video.
So my question is how come only audio is playing and not the video.
I am sure my codec is set to H.264 which is the most standard codec, right?
Please advise what to do.
P.S. I exported the bounced file as avi (using "file" and "export" from quick time menu and I was able to play it to other computers. The quality though is not as good as quick time movie.

I have the same problem: HD movie exported from Final Cut Pro as av QT movie will play beautifully on in the QT player on the dual Mac Pro it was created on, but when trying to play it on my flatscreen TV from a Mac mini, I get sound, but just a black screen.
Format is Apple HD 1080i/50, 1440 x 1080 (1888 x 1062) (no idea where these formats come from) FPS 25, nomal size and current size is 1920 x 1080. I have QT pro 7.5.5. and mpeg-2 plug-in on both macs.
I have also tried the h.264 codec with same result. MPEG-4 codec will show video with staccato perfomance and stops, even though it plays evenly on the Mac Pro. My .movs in ordinary 4:3 plays ok, so may be it’s a HD format problem?
Juging from other postings, there is a bug in the later QT versions, but why then is it fine on one mac and not others, with same version of QT. TV has nothing to do with it, because it plays quirky on other Mac minis also.
Someone from Apple should comment on all these problems.

Similar Messages

  • How do I down load Quick Times to my other computers?

    I would like to know how to load D3381Z/A Quick Time on my other 2 computers.  I do not want to pay for the same down load again and again.
    Thanks ,
    Bobby
    4-5-12

    Thank you for your reply.  I had forgotten that I did have to get the pro version for what I wanted.  HOWEVER, I wish I had been notified that it was just for 1 machine.
    Thank you and have a great, happy and safe EASTER.
    Bobby

  • IMovie file convertionto AVI (23G ), however when played via Quick Time only the first 2 minutes play - any advice?

    iMovie file converted to AVI file (23G+ ), however when played via Quick Time only the first 2 minutes play (project is just under 2 hours & was prepped by FCE - 2 minutes of 2 hour project is unacceptable -- any advice?

    iMovie file converted to AVI file (23G+ ), however when played via Quick Time only the first 2 minutes play (project is just under 2 hours & was prepped by FCE - 2 minutes of 2 hour project is unacceptable -- any advice?

  • Im trying to play an AVI file on my mac but wont play with quick time ???

    I am trying to open an AVI file on my macbook pro but wont play on quick time player??? I have down loaded DIV X for mac and still not playing help guys thanks

    VideoLAN - Official page for VLC media player, the Open Source ...

  • HT3775 i can not get my mp4 file to play on quick time player

    I can not get my mp4 file to play on quick time player

    Contact the manufacturer of the motocycle system.  Many systems are not compatible with iOS devices but work fine for the simple iPods.

  • HT3775 Is there any program than converts .pvm files to files that can be played by Quick time player?(I own a mac)

    Is there any program than converts .pvm files to files that can be played by Quick time player?

    Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

  • HT3775 AVI file will play on Quick Time?

    I have an AVI formatted movie file that will not play on Quick Time Player.  I have all of the codecs available for the player despite the fact that AVI is natively supported format on Quick Time. Any advice?

    Conversion may be the solution. You can get the video converting software here fo to convert your avi files to quicktime mov files: https://itunes.apple.com/us/app/video-mate/id592736614?mt=12

  • Importing a Quick Time file  into FCP 5.14 file is not recocnized

    Hi, I purchased a stock footage in quick time format from istockphoto. Importing it it gave me an error that the file was unrecognized. It plays OK on me desktop using Quick Time. I exported as quick time file, using DV NTSC... no luck.
    Than I exported as AVI with DVD NTSC compression, and it solved the problem.
    Why FCP reads AVI (Windows format) but doesn't read his own... I am puzled!
    If anyone knows the answer, I will appreciate.
    thanks,
    Message was edited by: Girshon Rutstein

    First of all thank you all you guys for your help! Secondly Apple webmasters should fix the problem with solve and helpful buttons. It gives an error.
    iMovie has no problem to read this file.
    Yes Final Cut Pro is a sensitive tool. This is not the first time I am running into this kind of issues. Last week I created a particle Illusion effect as HD mov file
    Importing into FCP it showed me only 1/4 of the screen. I fixed this by creating the AVI file. The conclusion is (I am maybe wrong) that Apple should work on the quick time issues.
    Thanks again!
    Message was edited by: Girshon Rutstein

  • Quick time file disappeared

    Does anyone know why my Quick time file just disappeared off my iweb page. When I click on the quick time file the amount of time of file shows but no video media? This happened a couple of weeks ago but I inserted a second file and it worked. Now even my desktop file will not play, however all other quick time files do play?

    It's possible the desktop file is corrupted. Try a simple restart and/or repair permissions & then restart your computer.
    !http://i45.tinypic.com/jl0z95.jpg!

  • My speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?

  • After installing Maverick, my downloaded movies will not play in Quick Time.  It gives me the following error "You can't open the application "QuickTime Player.app" because it may be damaged or incomplete."  What can I do?

    After installing Maverick, my downloaded movies will not play in Quick Time.  I receive the following error message:
    You can’t open the application “QuickTime Player.app” because it may be damaged or incomplete.  So I tried to unistall QT and I get an error that says, You can not delete this application as it is a requirement for the OSX.
    Well I did find a way to delete it, by going into the various components and one by one deleting it.  Now I reinstall it and  the message is that this Quick Time is for an earlier version before Maverick 7.  SMH....Now what.?

    Hello, terrygav. 
    I would recommend processing a reinstall of Mavericks.
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason H.

  • I just updated tosystem10.6.8. I am running Iphoto 08 version 7.1.5 Quick time movies will not open and play directly in Iphoto. When I move them to my desktop they play fine.Quick time 10.0 What do I need to do?

    I just updated tosystem10.6.8. I am running Iphoto 08 version 7.1.5 Quick time movies will not open and play directly in Iphoto. When I move them to my desktop they play fine.Quick time 10.0 What do I need to do?

    You need to download and install QuickTime Player 7 for Mac OS X v10.6.3 or later
    OT

  • DVD Studio will not encode my quick time files!!

    Okay, so I know that I can run my files through compressor and make MPEG2's to burn in DVD Studio Pro. But it is just an extra step for what I do because usually we need a quick time file also to post to our website. When I drop any .mov file into DVD Studio it gives me an error while encoding... What can I do? are my codecs wrong? HELP!!!

    Okay, the dimensions on one of my files is 720x480.
    the codec i am using is DV/DVCpro - NTSC, Integer
    (big endian), timecode.
    The frame rate is most likely 29.97 or whatever
    digital video is. It is not 24fps.
    Well, your frame size is OK. Check the frame rate to make absolutely sure it's 29.97 (since you said it's not 24 fps) and not something slightly different.
    Having your disc project set to PAL instead of NTSC shouldn't cause the error, even if you bring in NTSC assets. At least, it didn't cause errors on DVDSP 4 when I tried it just now.

  • Photoshop doesn't open quick time files

    anyone who has any idea why ps cs 5 doesn't open quick tim files , please tell me.
    thank you

    PS doesn't deal with compressed files that well. Try to convert it in an external tool like Quicktime Pro or one of the gigazillion free video converters based on ffmpeg....
    Mylenium

  • How do you import a Widescreen Quick Time File captured by Final Cut Pro?

    Hi
    Here's my workflow: I captured HD 1440X1080 footage in Final Cut Pro. FCP creates a folder of Quick Time Files in a Scratch Folder. A month ago, I had no problem importing the Quick Time files into IMOVIE HD 6 and preserving the widescreen format.
    Now, for some reason, when I import the same files into IMOVIE HD, it is squashing the image (stretching it vertically) and leaving a gray bar on the left side of the screen.
    Can IMOVIE HD import Widescreen QT files created by FCP? If so, how?
    All help appreciated.
    Phil

    iDVD does everything automatically for you. With DVDSP and Compressor, all steps must be done correctly. The trade off is that you achieve better quality using Compressor over iDVD.
    1. First thing to do is export your sequence as an uncompressed interlaced 25i 720 x 576 16x9 Anamorphic QT.
    2. Determine your optimal bitrate by using a bitrate calculator. Here's a good one. Remember you need to account for all video on the disc, including motion menus.
    http://www.videohelp.com/calc.htm
    3. Bring your down converted QT into Compressor and use the manual settings set your bitrate. Also encode out a Dolby digital AC3 file. These files take up less bandwidth than uncompressed audio. Also remember to match your upper fiiled dominate filed order as well in Compressor. This must be consistent throughout the export and encoding stages.
    4. bring your encoded video and audio files into DVDSP and author

Maybe you are looking for

  • Crystal Reports for B1 on Hana version 9.0, Invalid column name DOCCODE

    Hi Experts, I am new to SAP B1 for HANA, now I am learning how to use Crystal Report with SAP Business one for HANA version 9.0. I am facing this issue while trying to save the crystal report inside SAP B1 for hana. Please help me to fix the issue Th

  • X1 and an additional screen

    Hi there, I would like to use my X1 as primary screen and my additional 27" display as secondary. I bought the USB 2.0 port replicator, but I dont like it very much at all. It is lagging and not that functional as I would have liked, which is why I w

  • Change the colour of the outside of your iphone 3GS?

    I have an iphone 3GS in white but the white shell,cover whatever you may call it is slightly chipped broken and generally looking not so great. So i was wondering if it is possible to have the shell/cover replaced in white or to black, can you do thi

  • Rename view,procedure,function,trigger in oracle.

    hi all, Just i am thinking a concept in oracle. can i rename view,procedure,function,trigger in oracle. i know it is not possible bcos it is a script. can u please confirm me

  • Apple account payment

    I've had been using the same card for my Apple ID to download apps, because of coarse you can't without a card. But I had to make a new Apple ID and now I went to use the card and it says the card was declined? Any help.? The card is a bb&t check car