Unable to play youtube videos unless on youtube.
Recently my system seems to nolonger be able to play any youtube videos unless on youtube. any other site the video could be embedded in it just sits at 00.00 with out loading the file. I have tryed disableing all addons. and the videos still refuse to load or be played unless I got to youtube to do so.
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.
Could you try disabling graphics hardware acceleration? Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Similar Messages
-
my camera is playing up its stuck in negative mode. even when i play a video and on youtube it plays in black/white negative mode. anyone help please?
<E-mail Edited by Host>Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
I have no audio problem playing videos at google chrome or while playing any games on my desktop which i mean the sound play is smooth without any extra noise,but when i uses mozilla firefox to play any videos(e.g youtube),there will be sound like "zzz" or u may call it cracking which seems to be lagging sound but it is not lagging at all.I try to use my phone to play music through my speaker and it's working fine.It only happened recently few days ago,the sound is irritating which make any music sound like crap..Please help..Oh and for your information when playing the video the cracking sound is not so much but scrolling up and down the page it became worst and louder.
Hey guys,i have try what your say and it did not work and i've been finding for ways all over the internet and getting really really pissed off.could this http://forums.adobe.com/message/4323464#4323464 be the problem?..any ways to help me solve it?maybe it just maybe not mozilla.It's just that google chrome is better in term of the crackling sound is minimum when i scroll up and down and i got a feeling it's because google chrome is fast not lag at all that's why not much of the static crackling sound ..
-
Unable to play recorded video using BB multimedia api in other platform
Hi all,
I am new to Blackberry application development. The application I am developing it is required to record a video using multimedia api.
I am using
video encoding : MPEG-4
audio encoding : AMR
res : 320 x 240
Device using Curve 8250
It is the same encoding combination BB curve use to record a video from default recorder.
_player = Manager
.createPlayer("capture://video?encoding=video/3gpp&width=320&height=240&fps=12&video_codec=MPEG-4&audio_codec=AMR");
After recording it from my application I am able to play the video in vlc even in BB devices. But when I am trying toplay in android,J2ME and iPhone platform. It is unable to play the video..Can anybody help me out in this regard.
I am really in trouble. I need your help .
Thanks in advance.
Regards,
AnganIn my experience if windows media player plays it(the mpeg4), it will not be compatiable with quicktime. At least if you do not go installing the codecs to read ISO mpeg 4 (.mp4 is the standard extension that quicktime puts on the files). Another thing to check is if you are creating ISO compliant files. The mpeg4s that windows media reads by default are not ISO compliant. You also need to keep in mind that Quicktime is a simple profile mp4 and main profile mp4 player (although not all b frames are compatable with quicktime). See http://en.wikipedia.org/wiki/Quicktime for a basic overview of the profile support. I suggest that you try playing the media with free softwares such as vlc http://www.videolan.org/vlc/ and mplayer http://www.mplayerhq.hu/design7/news.html and check that the format and codecs are correct. Although they will play non standard files they will list the codecs in use (make sure that you are using ISO compliant standards as you can put more than MPEG 4 in mp4).
-
Hey guys, I have an ipad2. Am a new user of apple products. Currently am having trouble streaming movies and series online...I seem to only be able t watch YouTube video from the YouTube app installed on the iPad. Please any suggestions?
Currently am having trouble streaming movies and series online...
From where? Using which apps? -
W520 will not play flash videos unless buffered in all browsers (youtube works...)
I just bought my W520 referbished and I cannot watch flash videos unless they are fully buffered. Several places suggests it has something to do with F-secure which does not appeared to be installed. It also only effects certian players - not all. I tried it on a verity of websites and have found that JWPlayer is one of them. Youtube works fine. I have tried reinstalling Flash - I have updated all of my browsers (IE, Firefox [default], and Chrome). Could this be a hardware problem? Something to do with Optimus?
Solved!
Go to Solution.ajipaul,
Can you share the links for both of the videos which work and does not work fine?
We tried our W520 streamming 1080p video from youtube and they work fine. Not sure if we got your issues right.
- Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
My iPod Touch And IPad 2 Aren't Playing YouTube Videos! is YouTube Down?
My IPad And IPod Touch Isn't Playing YouTube Videos But My Laptop Is Playing YouTube Videos Fine. Please Reply. Thank you!
YouTube is not down on my iPad. You may want to try a soft reset of your device. Hold the "lock" and "home" buttons at the same time until the screen changes to the Apple logo. If that doesn't work, it can either be a problem with your internet connection. Make sure you can connect to everything else, and then call Apple support.
WARNING: Telephone support MAY cost you if you are not covered by Apple Care. -
Unable to Play facebook video
All videos on Facebook are h.264 encoded so they don't need flash. Don't spread false information, iPad safari can play Facebook videos since last year. I used to play them without an issue on my iPad but I guess the latest software update screwed that up.
http://www.intomobile.com/2010/04/27/facebook-enables-ipad-friendly-video-playba ck/
The link says videos uploaded on Facebook are encoded in iPad friendly format, YouTube videos are already iPad friendly so you should be able to play most videos on Facebook on your iPad safari. -
Unable to play/load video in Elements trial
I just downloaded the trial edition of Elements 10 for the Mac, and am having a problem viewing the video. I've searched the forum and tried all the suggestions I've seen (permissions, root user, reboot, reinstall, etc.), but nothing seems to work. There are two basic problems I'm seeing:
After loading a video file, either from an existing project downloaded from lynda.com or a video file on my Mac, double-clicking a clip and clicking the "Play" button does not play the video. The button changes from the play to pause icon, but nothing happens. Dragging the scroll bar or holding down the right arrow key advances the video, but it will not play by itself. Strangely, any audio files (also from lynda.com) do not play either.
When trying to import from an older DV camcorder (JVC GR-D70U), the tape will play and can be controlled by Elements, and I can see video on the camcorder screen, but no video is shown in the Elements capture screen nor is any video captured. When I stop the capture, I'm told that no frames were captured.
All the above steps work fine with iMovie (different lynda.com tutorial files, of course), and I can import, play, and do most anything that iMovie allows. Having run into the limitations of iMovie I really would like to move up a step or two; hence my trying out Premiere Elements 10. So far it's been a complete bust since it doesn't appear to allow me to play video, no matter what I try. It's such a basic problem that there must be one underlying reason that no video capture or playback works, but after playing with it for the past two days and googling everything I can find on the subject, I'm about to give up.
The system is a Mac Pro (3,1), dual quad-core 2.8 GHz Xeons, 16 GB of memory, OS 10.6.8, with an NVidia GeForce 8800GT video card and two Dell 24 inch monitors. Not the latest and greatest, but it should be more than adequate for my simple needs (and I'm hoping that the video card is OK). Since things run fine with iMovie my assumption is that the video file formats are OK, especially since a simple import from a DV camcorder works on iMovie but not Elements 10. I've seen references that allude to the fact that some video formats don't work on the trial edition but will play OK if you buy the complete package, but unless there's a money-back guarantee, that seems a bit extreme.
So, any ideas or additional things that I might try? As I said, it's probably one basic thing that is causing the video problems, but I've tried everything I can think of and have been able to find on the web/forums with no luck at all. Any suggestions, advice, or recommendations that anyone might be able to give woudl be greatly appreciated.
- KenBill & John,
Thanks for the pointers and info - very helpful; and informativel. My apologies for missing the file info via QuickTime - I should have figured that out by myself. In any case, I'll concentrate on the lynda.com files. I suspect that since this is probably a single problem affecting everything, figuring that issue out will solve the other file problems as well.
Looking at at of the lynda.com videos with MediaInfo (thanks, John), I get the following screen shot (hope this comes through OK):
Looking at the same file with QuickTime Player and doing a Get Info:
The following is the output from Massanti ($2.99? This is starting to get expensive... ):
====
* * * Media Inspector 0.7.443 file analysis report.
* * * Media Inspector is ©2011 by Diego Massanti - http://mediainfo.massanti.com
* * * MediaInfoLib by Jerome Martinez - http://mediainfo.sourceforge.net
Created on: Jan 14, 2012 1:38:13 PM MST
Report for file: alexandria-1.mp4
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................1
Video Codecs Used.................................AVC
Audio Codecs Used.................................AAC LC
File Format.......................................MPEG-4
Play Time.........................................15s 616ms
Total File Size...................................15.5 MiB
Total Stream BitRate..............................8 352 Kbps
Video Stream #1
Codec (Human Name)................................AVC
Codec (FourCC)....................................avc1
Codec [email protected]
Frame Width.......................................720 pixels
Frame Height......................................480 pixels
Frame Rate........................................29.970 fps
Total Frames......................................467
Display Aspect Ratio..............................16:9
Video Standard....................................NTSC
Scan Type.........................................Interlaced
Scan Order........................................BFF
Color Space.......................................YUV
Codec Settings (Summary)..........................CABAC / 3 Ref Frames
QF (like Gordian Knot)............................0.789
Codec Settings (CABAC)............................Yes
Codec Settings (Reference Frames).................3
Video Stream Length...............................15s 582ms
Video Stream BitRate..............................8 170 Kbps
Video Stream BitRate Mode.........................VBR
Bit Depth.........................................8 bits
Video Stream Size.................................15.2 MiB (98%)
Video Stream Language.............................English
Date of Original Encoding.........................UTC 2010-09-13 22:25:07
Color Primaries...................................BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
Transfer Characteristics..........................BT.601-6 525, BT.601-6 625, BT.1358 525, BT.1358 625, BT.1700 NTSC, SMPTE 170M
Matrix Coefficients...............................BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
Audio Stream #1
Codec.............................................AAC
Codec (FourCC)....................................40
Audio Stream Length...............................15s 616ms
Audio Stream BitRate..............................192 Kbps
Audio Stream BitRate Mode.........................VBR
Number of Audio Channels..........................2
Audio Channel's Positions.........................Front: L R
Sampling Rate.....................................48.0 KHz
Audio Stream Size.................................361 KiB (2%)
Audio Stream Language.............................English
Date of Original Encoding.........................UTC 2010-09-13 22:25:07
====
For Bill's question about importing, I have numerous imported videos. A lot were translated from very old 8mm family tapes were done commercially. Others were imported via the Canpous ADVC 100, which is a hardware device that accepts S-VHS and other inputs from a video source and outputs digital video. Basically a way to grab and convert old video formats to a computer. All were done on a Mac, and all play very well via QuickTime.
Any ideas from the above? And as always, I'm sure that this is some sort of setup/hardware/configuration problem on my part that is affecting all the videos, since I find it hard to believe that the video files themselves are at fault, especially since I took all the defaults on installation.
I'll try installing on a MacBook Pro to see if the problem persists and let you know how that goes.
- Ken -
Unable to play audio video files in solaris express
I am unable to play mp3 and avi files in my newly installed oracle solaris express. I have installed 'gnome-audio', 'gnome-media', 'gstreamer', 'gstramer/plugin/gnonlin' packages. I have even installed 'IPSFWmpeg' MPEG-1 liabrary from sunfreeware repository. All these softwares are shown as installed packages in my package manager. But still on playing any video in totem movie player or audio file in rhythmbox player, a dialog box with an error message is displayed "The playback of this movie requires a MPEG-1 Layer 3 (MP3) decoder plugin which is not installed".
What should i do to play avi files in Totem movie player and mp3 files in Rhythmbox music player? Please don't suggest other media players because i want to use only above said totem and rhythmbox and i want to know what's wrong with my software installations?You can get a free MP3 codec from Fluendo (http://www.fluendo.com/shop/product/fluendo-mp3-decoder/). There are some instructions on setting it up here: http://blogs.sun.com/observatory/entry/playing_your_mp3s_with_songbird.
-
Unable to play flash videos in you tube
hi, i am using nokia 5235 and i always watch my videos throug mobile youtube. For some videos it says to switch to flash player beta and so far when ever i switch i am able to videos . However for d past 3 days the videos, while switchin to flash video beta remain black and nothing comes even aft half an hour
Solved!
Go to Solution.maybe because it's a beta?, there may be bugs in the beta flash player.
Download and install the YouTube app.
640K Should be enough for everybody
El_Loco Nokia Video Blog -
Retrieve what video resolutions(quality) a youtube video has, with youtube api or packet analysis
a youtube video is usually with multiple video resolutions (quality) like 240p, 360p,720p,etc how can I retrieve what video resolutions(quality) a youtube video has are there any youtube api which can get this information
I think If I capture the packets when I'm watching a video, by analysing the packets, definitely I can know what resolution this video provides but I don't know which part the packet provide this information does anyone know this? thanks!I am no iPhone expert, but I believe it has to do with what connection you are using.
I noticed this the other day, I watched a YouTube vid the other day connected to my home wifi, and it looked amazing. Then I went to show a co-worker the same vid while on the 3g network. It looked like crap, all large pixels and blury. Anyway that is what I noticed. -
When I try to play a video within a news story, it either doesn't start or stalls soon after starting. At the right end of the web address and the address for the specific news article, non-stop spinning occurs.
Mac OS X (10.6)
Use Software Update to update your OS to OS 10.6.8 or use the update combo. While you're at it, update everything else that goes along w/OS 10.6.8 through Software Update.
After the installations, repair permissions and restart your computer.
If you are using a 3rd party browser, make sure you are using the latest version. Safari updates will be shown in Software Update.
Make sure you have the latest version of flash player, VLC & Flip4Mac.
If you have already done all of the above, post a link of the video(s) in question so we can check it out for you. Also, correct your profile information. Thank you. -
Unable to play wmv videos on Nokia X6
Hello All,
I have Nokia X6 (S60V5) phone and I am trying to play wmv videos on it with no luck.Its Device details says that it can play wmv9
Video Playback Formats 3GPP formats (H.263), Flash Video, H.264/AVC, MPEG-4, RealVideo 7,8, WMV 9
I did encode a sample video with following config.
Resolution: 480x360
Video Bit rate : 1024K
Video Codec: wmv3 (which is WMV9)
Audio codec: wmav3
Sampling Rate: 44100
Audio bitrate: 128K
This configuration is not supprted on X6
Could anyone tell me what should be the configuration of wmv file inorder to be played on Nokia X6?
Thanks in advance,I usually use flv or mp4 as the container and encode to:
Video:
MPEG-4 Video (mp4v)
640x360 resolution
Approx 700 to 800 kbps bitrate
29.9 fps framerate
Audio:
MPEG AAC Audio (mp4a)
stereo,
Approx 128 kbps bitrate
44.1 kHz sample rate
Although the X6 is meant to be able to play H.264 / MPEG-4 AVC (Part 10) I find it fails to play any videos using this codec at resolutions of 640x360 at any decent bitrates and framerates which can be a real pain.
I think the X6 can also playback MPEG-4 (Part 2) / H.263 but I don't normally use this particular standard.
According to
http://www.forum.nokia.com/Devices/Device_specifications/X6-00/
Compatible codecs are 3GPP formats (H.263), Flash Video, H.264/AVC, MPEG-4, RealVideo 7,8, WMV 9 with video playback frame rate of 30 fps.
S.
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black -
Unable to upload entire video clip to Youtube from Premiere Elements 10, "Share" feature
Hi all,
I just bought Premiere Elements 10 and plan to upload video to Youtube directly from Premiere Elements 10 "Share" feature. However it always uploaded about 10 to 20 seconds of my 2 minutes video only. Then it only uploded about 20 seconds video to Youtobe successfully but not the entire video clip which is about 2 minutes. Is there anyone face the same problem like me? Please help me on this matter. Thanks in advance.
Best regards,
EllieJohn,
The WAB (Work Area Bar) has tripped up many, and is a common issue, when the Timeline output is truncated.
Here is a look at the WAB (from PrE 4.0, but works the same in later versions):
The WAB is a great tool, when one wishes to limit the Export, or perhaps the area of the Timeline that Renders. However, many do not even notice it, and fewer understand how it works, or how to use it, and it gets in their way, if something is not set properly.
To the OP - Good luck,
Hunt
Maybe you are looking for
-
[solved]xorg server 1.6 and dbus (???)
hello everyone first of all, i'm fairly new to arch, however, i do have experience with linux. i've been using gentoo for about 4 years and a few other distributions before that. secondly, i'd like to apologize if this is the wrong place to post thi
-
Real time logging: best practices and questions ?
I've 4 couples of DS 5.2p6 in MMR mode on Windows 2003. Each server is configured with the default setting of "nsslapd-accesslog-logbuffering" enabled, and the log files are stored on a local file system, then later centrally archived thanks to a log
-
How to use a third party automation server
I would like to use the methods of another application. The application exposes the methods through an automation server. How can I use this automation server in Labview? Do or do not, there is no try
-
Lenovo S12 Ion or Lenovo U350 Core 2 Solo?
I'm looking to get a Laptop/Netbook for school that has great battery life but is equipped with a full sized keyboard, light weight, and performs extremely well. I pretty much have come down to the units mentioned in the title Can anyone give me some
-
Archive the material master : Object RL_LUBU
Hi Folks, we are archiving the material. Error : WM stock transfer (from/to material) exists Diagnosis : Entries in Table LUBU (Posting Chaneg Document) Solution : Use the archiving object RL_LUBU in SARA. Queries : 1) This Object does not give mater