Unable to point domain to BC

I cannot point the domain to my Business Catalyst account. I've tried adding the Name Servers to the GoDaddy page. But they do not show the website after I've connected the domain in BC and the NameServers on GoDaddy. I have photos, but they will not attach to this case.

Sanjit, I added the records several weeks ago. Recently today I went in a
checked and it had also included the records:
ns03.domaincontrol.com (informational)
ns04.domaincontrol.com (informational)
GoDaddy would not allow me to delete them,
see attached photos:
image: Inline image 2
image: Inline image 3
Sean Turner
[email protected]

Similar Messages

  • OD Master/PDC, 10.4.11, why xp clients unable to locate domain controller?

    After a migration/upgrade from 10.3.9 to 10.4.11 Server, windows XP clients are intermittently unable to log in to or even bind to the PDC running on that server.
    I did a clean format and install from the 10.4 media, choosing the standalone server type, and applied all the Software Updates, I got forward and reverse DNS working for my zone, then I followed the instructions at http://www.afp548.com/article.php?story=20050615173039158 to move my OD from a working 10.3.9 server to 10.4.
    This server goes against the usual recommendations, as it provides DNS, OD master, PDC and file services to 32 clients all in the same subnet, 20 running Windows XP SP2 and 12 running OS X Client 10.4.x or 10.5.x.
    File services and various other users of the OD/LDAP, for example Wildfire Jabber/XMPP server and Apache2/LDAP running on a separate Linux server, are able to authenticate against the new 10.4.11 OD.
    However, at this point the symptoms become intermittent approx. 40% of the Windows XP clients were unable to log in with various domain accounts, yielding errors of the form "Unable to find domain FOO". If I remove a client from the domain by joining it to WORKGROUP and rebooting, then try to join FOO again, I'll get an error, "Unable to locate Domain Controller for FOO..."
    The set-up:
    My server's FQDN is myserver.foo.example.com
    The server's DNS is authoritative for the 10.10.10.0/24, foo.example.com zone and I have the trailing dot's in the right places, so ping myserver.foo.example.com, ping myserver, and ping 10.10.10.10 (server's example IP from the foo.example.com zone) all work correctly.
    The DHCP server for this vlan is providing my DNS server to the clients, but is providing no netbios server. The XP clients are all set to use the DHCP server setting, which, according to the TCP/IP Advanced Settings panel, means that they'll revert to netbios over tcp/ip since no wins server is specified.
    In Server Admin->Windows->General:
    Role: Primary Domain Controller (PDC)
    Description: FOO Domain at example.com
    Computer Name: myserver
    Domain: FOO
    Server Admin->Windows->Access:
    Allow Guest Access: Check
    Client Connections: Unlimited
    Authentication: NTLMv2 & Kerberos, NTLM, and LAN Manager: All check
    Logging->Log Detail: High
    Advanced->Code Page: Latin US
    Services: Workgroup Master browser and Domain master browser: check
    WINS Registration: Off
    Homes: Enable virtual share points: check
    Should my Windows service on 10.4.11 be providing WINS or not? If so, should the DHCP server be set to point the clients to it? If not, how do the XP clients reliably resolve the FOO domain?
    Why did all these XP clients work fine with a 10.3.9 Windows PDC but don't work with 10.4.11?
    Another strange point - I can use the XP-side 'net view' command to poke around and things look reasonable. I.E. even the clients that aren't joined to the domain and can't locate the domain controller will return sane results for 'net view /domain:FOO'.

    The new PDC does use the same domain name as the old PDC, and the SID mismatch is at least partially to blame. After I'd performed the upgrade and confused the windows clients, I saw the advice on using samba's net command to duplicate the old PDC's SID to the new PDC. Maybe someday I'll have the opportunity to try that.
    I resorted to removing all the XP clients from the domain and re-joining them. The XP clients were still able to contact the domain intermittently. I used various command-line tools on the XP side, including the built-in net command as well as some others I downloaded such as the quite useful http://www.joeware.net/freetools/tools/findpdc/index.htm, as well as the client-side error messages during the domain join attempts and the messages in the Event log, to determine that the clients couldn't find the domain.
    The XP client TCP/IP settings state that the clients will revert to using netbios if no WINS server is specified, but that clearly wasn't working reliably, so I just enabled the WINS server on the PDC, told the DHCP server to hand out its address for the netbios-related options for that subnet, rebooted the PDC, waited a while for things to settle out, and now all the clients can reliably find the PDC.
    I still have no idea why the WINS-less set-up worked in 10.3 server but didn't work in 10.4 server, but believe me, I'll remember it now!

  • Unable to determine domain for account  Uninstall ecc6 on domain

    Hello All,
    I am trying to uninstall sap ecc6 from a server on a domain . While proceeding with uninstallation, it got stuck with following error details after entering the database details on sapinst.exe
    FSL-01018  Unable to determine domain for account S-1-5-21-705529515-409054649-1020538192-1108. The group name could not be found.
    ERROR 2008-01-02 10:29:35
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    I am trying to uninstall by logging to that server as administrator of domain . Can you guys give me some clue to fix this.
    Thank you in advance

    Hello All,
    Here are the other log details
    INFO 2008-01-29 11:02:05
    An error occured and the user decided to retry the current step: "|NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_uninstallDB|ind|ind|ind|ind|1|0|NW_OraDBCheck|ind|ind|ind|ind|2|0|checkForExistingDatabase".
    ERROR 2008-01-29 11:02:10
    FSL-01015  Unable to determine whether account TESTSAP\Administrator is member of account wicomp05\ORA_C30_DBA. The group name could not be found.
    ERROR 2008-01-29 11:02:10
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2008-01-29 11:02:10
    FCO-00011  The step checkForExistingDatabase with step key |NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_uninstallDB|ind|ind|ind|ind|1|0|NW_OraDBCheck|ind|ind|ind|ind|2|0|checkForExistingDatabase was executed with status ERROR .
    INFO 2008-01-29 11:02:17
    An error occured and the user decided to retry the current step: "|NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_uninstallDB|ind|ind|ind|ind|1|0|NW_OraDBCheck|ind|ind|ind|ind|2|0|checkForExistingDatabase".
    ERROR 2008-01-29 11:02:21
    Here TESTSAP\Administrator is the administrator of domain TESTSAP on which  sap is installed and wicomp05\ORA_C30_DBA is hostname and oracle dbsid and the group dba,
    When I check on the the group ORA_C30_DBA,  TESTSAP\Administrator is the member of group
    I tried to change the name of the group to
    ORA_C30_DBA1 and it successfully passed the phase of error. However the drop  database phase seems like disabled and it tells to manually drop the database.
    Can I proceed with this method and finally drop the database manually ?. Have any one done like this.
    Please help.

  • Unable to find domain controller for the specified domain. Please explicitly specify the domain controller.

    Im getting error "Unable to find domain controller for the specified domain. Please explicitly specify the domain controller."   when I try to create an AD connection for my User Profile Service.  The entire sharepoint environment is installed
    on one server.  That server has everyting on it, AD, SQL, Sharepoint, and its the domain controller. I cant figure out why this will not identify?Trevor Fielder

    Hi,
    Did you get this error when clicking on the Populate Containers button?
    If yes, please make sure that you have provide the domain credentials in the account name and password
    boxes below when entering the domain information. The account must be granted the replicating directory changes permission on the domain.
    You can refer to this blog:
    http://www.harbar.net/articles/sp2010ups.aspx
    Xue-Mei Chang

  • Point domain to subsite

    I need to point my domain name to a subsite instead of the root site. Ex. I want
    www.mydomain.com to point to myrootsite/subsite.aspx
    Thank you,
    Mark
    Mark Ferrero

    this is not possible with the AAM settings or IIS bindings. SharePoint only Support the Site collection level using the Host name site collection. 
    Due to maintain the Hierarchy between the site collections and subsites that's why.
    you have two options,
    1) create a new site collection
    using HNSC. and move the data from subsite to there.
    2) Create separated IIS Web app with Index.htm page which point to
    myrootsite.com and
    this page redirect to myrootsite/subsite.aspx.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee62ea7b-91b1-4ac2-a9a3-fa8cba1ff24e/pointing-domains-to-multiple-sub-sites?forum=sharepointadminlegacy
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Unable to Configure Domain in Informatica

    I have an Informatica instance 8.6 installed in one the machines and I am trying to configure another domain present on a diff box (informatica 7.1.2 instal) through repository manager.
    I get error when i tried to plug in the domain, hostname and port number
    "PCSF_46008 unable to connect to domain to lookup service" I tried to give fully qulaified server name and ip address but still no luck.
    Is there any way to find out the domain name of 7.1. install (some one esle installed it) . Not sure where to look it..
    Any advice what could be the problem
    Thanks
    Prasanth Gurram
    Edited by: Prash11 on Apr 16, 2011 11:37 PM

    Hi,
    Please query on this table PCSF_DOMAIN,*PCSF_MASTER_ELECT_LOCK* which contains all the information related to Domain Name,Node and you need to query on the Database where the informatica repository is stored.
    Please let me know whether this worked or not.........
    Thanks,
    Navin Kumar Bolla
    Edited by: Navin Kumar Bolla on Apr 19, 2011 10:23 PM
    Edited by: Navin Kumar Bolla on Apr 19, 2011 10:24 PM
    Edited by: Navin Kumar Bolla on Apr 19, 2011 10:29 PM

  • Unable to verify domain "Could not verify this domain because it was previously configured for your tenant or for another tenant."

    I've been trying to verify the domain kailice.co.uk which I own , however I receive the following "Could not verify this domain because it was previously
    configured for your tenant or for another tenant."
    I believe I verified this domain with a previous trial subscription which has since expired and so I'm unable to login and remove the domain but wish to transition it to my new subscription

    Hi Jack,
    Each custom domain can only be used in one Azure AD tenant and you can’t add the same domain to multiple Windows Azure AD tenants. In general, if you delete a domain in a Azure directory, then you can add it to another Windows AD Tenant.
    I am not sure if you have deleted this domain in your previous trial subscription. But it appears like you have not deleted the domain. Is that right?
     Recommend you to check the TXT/MX record in your Domain name register, delete other original TXT/MX records and just keep the TXT/MX record for the new verification.
    Also, it needs some time for your domain to update the record, if you still receive the same error, I recommend you to wait for a while and then have a try.
    Regards,
    Shirisha Paderu

  • Unable to join domain when OD Master is set up as PDC

    Hi all,
    I'm working on trying to get my OD server to authenticate our new windows vmware workstations. I have both LDAP and Kerberos set up, and everything works really well with my OS X clients, as do our Linux servers. However, I'm unable to get our windows clients authenticating. I can browse the "spidertracks" computer as well as the Samba shares, so the shares themselves are working. I'm simply unable to join our Windows 7 64Bit clients to the domain to authenticate with OD accounts. Here is what I have configured in the samba settings. Am I missing something? I've read the manual nearly 20 times, and joining the domain simply doesn't work, so I'm guessing I've missed a configuration somewhere when creating my Kerberos realm. Is there a command I can use to validate my samba settings are correctly running as a PDC?
    Thanks,
    Todd
    LDAP config dc=spidertracks,dc=local
    Kerberos Realm: SPIDERTRACKS.LOCAL
    Samba Settings
    MAIN
    Role: Primary Domain Controller
    Description: Spidertracks
    Computer Name: Spidertracks
    Domain: SPIDERTRACKS
    ACCESS
    Authentication: NTLMv2 & Kerberos, NTLM
    ADVANCED
    Wins Registration: Enable Wins Server
    DHCP Settings (on different machine, Free BSD Based)
    WINS Server: 10.0.1.11 (My OD server's IP)

    Bump:
    Rather than starting a new thread,
    I am fighting with the same thing on one of our servers, this is an issue that was fixed by the Samba guys, but I can't deploy their fix and still use OD.
    I'm starting to think that our experiment using OSX instead of linux as a server may be at an end, I keep spending a lot of effort chasing down issues that are solved months ago on linux.
    Somebody help, I dont want to be told to get rid of the shiny Mac ( or more likely bootcamp it to linux )
    --Bill

  • Unable to start domain

    Hi Experts,
    I am unable to start the AdminServer domain and getting the following error.
    Any ideas??
    <Error> <Security> <BEA-000000> <[Security:090737]An exception occurred while getting connection to validate the configuration settings
    java.sql.SQLException: [Security:090735]The DBMS connection was not usable
         at weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl.getManageableConnection(DBMSSQLAuthenticatorDelegateImpl.java:923)
         at weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl.validateConfiguration(DBMSSQLAuthenticatorDelegateImpl.java:153)
         at weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl.<init>(DBMSSQLAuthenticatorDelegateImpl.java:78)
         at weblogic.security.providers.authentication.DBMSAuthenticatorDelegateImpl.getInstance(DBMSAuthenticatorDelegateImpl.java:459)
         at weblogic.security.providers.authentication.DBMSSQLAuthenticationProviderImpl.initialize(DBMSSQLAuthenticationProviderImpl.java:56)
         Truncated. see log file for complete stacktrace
    Cheers,

    Hi,
    Few things I have noticed
    - I am assuming that you might be using Pointbase as the database.
    - Make sure Pointbase is been started before starting the weblogice server and then try to start the server.
    - if yes then it is not recommended to be used in production environment.
    Regards,
    Ravish Mody

  • Unable Extending a Domain to Enable Oracle BPM Process Spaces?

    Hi All,
    I am trying to extending a Domain to enable Oracle BPM Process Spaces.here I am following http://docs.oracle.com/cd/E23943_01/install.1111/e12001/config.htm#INSWC1280
    link. as per document i made modification in process-portal-install.properties an run the instal.xml as a ant script.Build was success with some Errors.after restart of WC_Spaces manged server I am not able to see new functions(process Space) iin webcenter spaces.
    for this I am adding log file which is created when i am running ant(install.xml) and process-portal-install.properties. Note:I am not using Content server and Discussion server.Is its required to have CS and Discussion server.
    https://dl.dropbox.com/u/78609236/log.txt
    https://dl.dropbox.com/u/78609236/process-portal-install.properties
    Can any one take a look into the issue and give me some resolution.
    Thank you!
    Siva

    Thank You Daniel
    I am unable to find the hot fix patch. Can you / anyone please help in this regard by providing the details like Link to download this hot fix patch.
    Bharath.

  • Laptops Unable to access domain.

    : Hello all!
    We have a several cisco 4400 wireless controllers and a cisco WLC. All clients autheticate to an AAA server. Acces points are cisco LWAP 1242. Security is PEAP TKIP ms-chap. Machine and user authetication.
    Settings are pushed out through grou policy. A new user can log on to a laptop (without cached credetials) and get all their network settings....most of the time. Randomly we have laptops that after being restarted, recieve "yourdomain.com is not availalbe" error message. The laptops will work fine for weeks and then random laptops start to get this error. If we wire them into the network, run a gpupdate, they logon fine. Shutdown, unplug, and the wireless works fine again.. I am not sure if this is an ms group policy issue or a wireless issue. Has any one experienced this or have any idea of a setting change or a gp setting that I may have missed??
    Clients are mostly windows 7 some XP
    Domain Windows 2008r2
    ACS 4.2
    Group policy settings - wifi config settings enabled and configured correctly
    Always wait for network enabled.
    allow fast reconnect disabled (was recommended by a cisco tech)
    Disabled computer passwords for domain about 2 months ago to see if the computers reseting their passwords were an issue.
    Any help or advice is greatly appreciated.

    we see that too occasionally. If a user has cached credtials, their drives won't pop or printers don't install, a quick logoff and back on usually does the trick, but the domain unavailable is driving me nuts. The laptop will work spot on for several weeks, and then just stop. Which made me try the route of disabling the computer passwords. I have also recently tried making the netlogon service dependant on the wlan services..... but not sure how that is working since like I said above, a laptop will work for awhile and then have the issue.
    We are school district and have about 1200 laptops through out the district. 600 of them located in our High School. We have access points in about every other classroom.
    thanks for your replies. Greatly appreciated. I am going to test out the SSO on the windows 7 clients over the holidays.
    Thanks for the replies..... anything else that comes to mind is greatly appreciated.
    Tim

  • GW7 - Unable to delete Domain & MTA objects after crash

    Yes...I know there are similar threads already on the forums...but I'm still stuck :)
    Had a server crash - which was running GW7 WebAccess & hosted a Domain (Domain_3 in our case). And naturally, this server was put together by a long gone consultant years ago - who left little documentation and no current backup (well, we thought we had one...but it didn't restore). So I was left to wing it on my own.
    Rebuilt a server from scratch (NW 6.5 SP8). The server sits it's own tree and is in a DMZ off of a BorderManager server (multi-homed - and yes...life on the trailing edge of technology).
    I was unable to delete or use the existing GW objects (Domain_3, MTA or WebAccess)...so I created a new domain (Domain_2) and reinstalled WebAccess and the MTA. I used the same IP addresses/ports as the original/crashed server.
    This got us back on our feet and WebAccess seems to be working as expected.
    I've since tried following various TIDS about grafting the legacy objects into another part of the tree, etc. Unfortunately, the grafting process likewise failed after seemingly creating the domain & MTA objects. An error message indicated that I (as admin) didn't have sufficient rights (hard to believe...). So now I have two Domain_3 objects (w/MTAs, etc.) in different parts of the tree - which are non-functional and un-delete-able (if that's a word).
    I also managed to create another temporary domain object (Domain_9) in testing - which now won't allow me to delete it either (ugh)!
    I also found numerous pending GW operations - including the deletes, modifies, etc.
    Digging deeper - I have some stuck obituaries that are all related to the domain objects that I'm trying to get to disappear. Of course, I tried to free these stuck obituaries following various TIDs (which I've done in the past for other non-groupwise objects stuck in limbo) - but failed. I'm not sure if this is a cause, an effect, or just collateral damage...
    So I'm 10 miles past frustration...and have obviously hosed this pretty well...
    Any suggestions or guidance on where to focus my attention first?

    That's how I ended up with a 2nd copy of Domain_3 :) I created a temporary container - and tried to graft Domain_3. It created a domain object and a MTA - before failing (the error said I had insufficient rights to complete the task). Naturally, I couldn't delete these new objects either once they were created I performed this action as "admin" - authenticated to both trees (the GW objects are actually in our production tree).
    KM

  • Unable to create domain (mid tier)

    Hi
    I get the following error when I try to create a domain through:
    admin console>bpel domains>create domains
    Exception
    Operation failed because:
    Error updating domain index.
    An exception occurred while writing the domain index (id"testdomain", ref "2") to the datastore; the exception reported is: ORA-00001: unique constraint (ORABPEL.DOM_PK) violated
    Please check that:
    + the machine hosting the datasource is physically connected to the network.
    + the connection pool properties as defined in the application server startup properties are valid.
    + the database schema for the OraBPEL server has been installed in the datasource.

    Have already tried that. The domain created already exists but doesnt show up in the dropdown in the console. If i try a new name, it still gives me an error. However, it is present under integration../domains folder.

  • IWeb - pointing domain name to MobileMe host

    Hi - I have been working to direct a domain name purchased through godaddy (mygodaddydomainname.com) to my mobileme website (web.me.com/myname/myblogblogname), where I'm publishing a page using iweb.
    The goal is for someone to look under the (mygodaddydomainname.com) name and see the site built with iWeb and hosted at (web.me.com/myname/myblogblogname).
    You would think it was simple but I am having difficulties.
    I followed the cname instructions in support at Apple & at GoDaddy but it isn't working. Does anyone have any good ideas?
    Gratefully,
    Lillian

    This Apple document tells how to configure your MMe account for CNAME forwarding: Setting up MobileMe to use a personal domain name. Then follow GoDaddy's instructions for their end.
    If you don't want to use CNAME forwarding but just the standard forwarding you don't need to do anything on MobileMe's end. At GoDaddy it will look this this:
    Click to view full size
    You can either choose with masking or not. Masking will only display mygodaddydomainname.com in the URL window of each page. The downside to that is that visitors can only bookmark the first page of your site. That may or may not be a problem with your site. My tutorial site is set up that way: http://toadstutorials.info.
    OT

  • Unable to activate domains on solaris 10

    Hi all, I have installed guardian 1.1 on my local machine (Win XP). I am using java 1.5_06. I was able to activate 9.2.1 domains on my machine, but not the domains running on Solaris 10. It keeps saying "The agent is not properly deployed to all running servers in the domain. Guardian requires that the version of the agent installed in the client be deployed to the admin and all running servers" I have deployed the guardian application several times on admin and managed servers. I still get the error mentioned above.
    Has anyone faced this problem before. Please help me with this.
    Thanks

    When I try to access the application directly using the URL (http://host:port/bea-guardian-agent) from the browser I get at 500 error (Error 500--Internal Server Error). In the weblogic server logs I see the following error message:
    ####<Apr 10, 2008 10:03:04 AM CDT> <Error> <HTTP> <c2r7u01> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1207839784253> <BEA-101017> <[weblogic.servlet.internal.WebAppServletContext@c0d1d2 - name: 'bea-guardian-agent.war', context-path: '/bea-guardian-agent'] Root cause of ServletException.
    javax.servlet.ServletException: Username and password are required.
    at com.bea.guardian.agent.weblogic.DispatchServlet.doPost(DispatchServlet.java:369)
    at com.bea.guardian.agent.weblogic.GuardianServlet.doGet(GuardianServlet.java:79)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:214)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:120)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3022)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1925)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1848)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1288)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    >
    Surprisingly, I see the same error message in server logs on Windows but am able to activate the domains.

Maybe you are looking for