Unable to populate the values to all time buckets for previous year.
HI BW GURU'S,
Please treat this as very Urgent . I have to deliver it by MONDAY ..
Reguest you to mail be back.
Reporting on ODS: FI-AR ODS ATB Report.
I have created the report which is working fine for all buckets to the current date.0P_KEYD2,and 0P_KEYDT these 2 SAP exits i have used for posting date and net due date for offset values.it's working fine for current date.
When i am giving the date like 2004 evrthing is coming under over 365 bucket only my requiremnt is i want the snap shot as if iexecute the report on the same day like it should populate the values to which bucket it falls.
Cabn anyone pls help me in this.
Advance thanks.
AV
I have solved this onmy own.
the solution at present i have done on Posting date as key date.but we have to take it on Net Due date.
Similar Messages
-
I attempted to update my iphone 3 using itunes. I'm not certain but I believe I did a backup on my pc first. I am now unable to use the phone at all - the slide bar won't move and I have a camera icon next to the slide bar which is not responsive. I have tried to sync and even left the phone connected to the pc overnight. The phone is going flat within a couple of hours and won't stop beeping every few seconds and seems to be syncing all the time, even when disconnected from pc. I am fearful that I have lost all my contacts - nothing is working - can anyone help - please?
Try resetting it if you can: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release. If you can't, try to connect it to iTunes, go to the Summary tab of your sync settings and click Restore to restore it. If that doesn't work you'll have to force it into recovery mode to restore it as outlined here: http://support.apple.com/kb/ht1808.
You can check in iTune to see if you have a backup. They are listed in iTunes>Preferences>Devices. However, the backup may not bring your contacts back as contacts are only backed up as necessary to preserve the recent call and call favorites lists. -
Unable to see the values in detail block
Hello,
I have a master detail block, when I query the form, I am unable to see the values for a particular field(Column), all other columns appear properly in the details block, Upon checking the same table(s) in SQL ( by using the JOIN defined in the where clause of the relationship in Forms) , it shows the relevant records for all fields. So what could be wrong with the Form, please advise.
Thanks
FMIQ wrote:
I have just checked the field its a non-database field which is being used as a LOV column to display a value derived from LOV. How do I make this populate at Query time, as obviously this works when the Form is in a insert mode but not for Query mode. How to make it work for Query ? As it for LOV column and non-database filed, ignore my first suggestion.
Does your non-database filed has associate any column ?
For example, you have SUPPLIER_ID (database column) and SUPPLIER_NAME (non-database column). SUPPLIER_NAME has LOV column. And when selecting supplier name from LOV value also assign at supplier_id.
Now to show supplier name when querying, you have to write POST-CHANGE trigger at supplier_id. like
SELECT ASSC_CODE INTO :MST_SUPPLIER.ACC_CODE
FROM ACC_SUB_SUB_CONTROL
WHERE ASSC_ID=:MST_SUPPLIER.SUPP_ASSC_ID;Hope this helps -
Unable to capture the Citrix network response time using OATS Load testing.
Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?
Hi keerthi,
1. I have pasted the code for the first issue
web
.button(
122,
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
.click();
adf
.table(
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
.columnSort("Ascending", "Name" );
} -
Unable to capture the value of vbrk-vbeln value from VF02
Hi All,
am printing form from VF02 ,,,once i execute the VF02 , and select Billing Document -> Issue Output to option .., my printi program gets triggered ,......,
but in my print program am unable to capture the value of VBRK-VBELN which i have entered in the VF02 tcode..
any other table the value of VBELN is stored???
pls help me out with the alternatives...
thanks
johnHi Dhiraj
One doubt how the value is populating in the NAST in the Print Program . While debugging i'm getting the Values from NAST but i want to know from where NAST is loading with these data.
Thanks
Bintu -
I get the following error while saving a task inside task list:
"The server was unable to save the form at this time. Please try again."
I tried restarting "search service host controller".
The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
How do I find information on the exact problem that is causing the error? What are possible solutions?Hi robikshrestha,
This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
in your situation?
Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
log and ULS log, see whether there is related information.
If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
Thanks,
Qiao Wei
TechNet Community Support -
Unable to determine the value of component ''! Workflow error, please help
Hi All:
I am getting the error "Unable to determine the value of component ''" and workflows are not getting processed. I found OSS notes 879100 related to this issue but I am new to workflow and not sure where to start from! Here is the notes description:
The workflow WS20500025 ('Service Connection Order Processing') encounters an error directly after being started. The following error messages are displayed in the workflow log:
SWP102: Error at start of an IF branch
WL821: Work item 000000100012: Object FLOWITEM method EXECUTE cannot be executed
SWF_RUN535: Error '9' when calling service 'SO_OBJECT_SEND'
SWF_RUN534: Problems occurred when generating a mail
WL863: Notification of completion cannot be generated
SWF_EXP_001073: Unable to determine the value of component 'QUOTATION'
SWF_EXP_001072: Error in the evaluation of expression '<???>' for item 1
SWF_RLS_001101: Operator 'GT': The value of the left operand cannot be determined
SWP085: Error when starting work item 000000100012
SWP010: Error when evaluating the IF condition for node 0000000075
Other terms
Service connection processing, service connection workflow
Reason and Prerequisites
This is due to a program error.
The checks in the workflow Basis have been made stricter. A query of the type 'Quotation.number > 0' now causes an error if the container element 'Quotation' is not set. This is always the case if the workflow is is running without quotation prcessing, for instance.
Solution
The error is corrected in the next Support Package.
If you want to implement the corrections manually in your system, change the condition in step 000075 of workflow WS20500025 as follows:
&IS-U: Kundenangebot& EX
and &IS-U: Kundenangebot.Verkaufsbeleg& > 0
Save and activate the workflow.
I am new to workflow and not sure where to start from! Could someone please help me with this? Rewards assured.
Thanks.
MithunANy ideas? Please help me if anyone knows the answer.
Thanks.
Mithun -
2013 standard sharepoint server. Content DBs were on a Trial enterprise server and copied over to standard server. All was good on trial server.
there are 8 sites on server, 2 of the sites cannot create or edit items, they get "The server was unable to save the form at this time. Please try again"
googling around i tried everything. restarted search host controller, checked ram usage (8gb free), manage content types, iisresets, edit the web.config file ( add things for ram, search host, etc), no alternate access mappings, .net HTTP activation, rebooted
server... I'm sure i missed some.
The server is new install, all but the August HF CUs. Trial server the content DBs came from is at same level.
It is not a server level issue as the other 6 sites are fine. its something with just 2 sites.
kinda stuck here...
Thanks,
Scott<-With the USL Logs were hard to track down what was happening, though I think it was too do with /_vti_bin/client.svc/ProcessQuery.
I did the Enable/Disable Anonymous Access on the Directory with no luck.
Brought up Fiddler and Saw that I was getting 401 and 500 Errors on
GET http://team.intranet.eandm.com/it/_vti_bin/client.svc/ProcessQuery HTTP/1.1
So it had something to do with Permissions. I checked the Authentication and the sites that worked had Forms Auth Enabled, and the ones that didn't, didn't have forms Auth enabled. Enabling it manually was no go.
I then went though the web.config on the working and non-working sites and there were some differences. The Authentication was Forms on the working site, Windows on the nonworking. There was many things not present. httpModules section was missing,
Many of the Microsoft Identity /Authentication lines etc.
So I Basically took the web.config from the working site and copied it to the non-working site preserving the following line from the original web.config:
<machineKey validationKey="{key}" decryptionKey="{key}" validation="{hash}" />
After that I had Security Issues, Though I think this was Caused by the July 2014 CU making everything use the Microsoft Identity parts, where as the server I was porting form had the sites created before the July 2014 CU. (though both were at the same level)
Even though all of the users were present in the site security, I had to Drop and re-add them to every site/and list with special Perms.
With the Security Fixed, I no longer received the Error "The server was unable to save the form at this time. Please try again"
Knock on wood its all functioning fine. -
Unable to get the values from PAYLOAD
Hi,
i'm unable to get the values of payload. When i use
currentTask = client.getTaskQueryService().getTaskDetailsById(workflowContext, taskID);
Element payload = (Element)currentTask.getPayloadAsElement();
node = (Element)payload.getFirstChild();
System.out.println(node.getElementsByTagName("documentName").item(0).getNodeValue());
I get null but i instantiate the bpel process with a value and i have
- <payload>
- <ns1:DocumentReviewProcessRequest xmlns:ns1="http://xmlns.oracle.com/bpel/Review">
<ns1:documentTitle>vbvnmbvn</ns1:documentTitle>
<ns1:documentName>bvnbvnvn</ns1:documentName>
<ns1:URI>http://www.first.pt</ns1:URI>
<ns1:assignees>gestdoc</ns1:assignees>
<ns1:groups />
</ns1:DocumentReviewProcessRequest>
</payload>
if i use System.out.println(node.getElementsByTagName("HELLO").item(0).getNodeValue());
I get a normal erro 'cause this variable don't exist...
Can someone please help me?
Thanks!!I think the problem is UME related. I had the same problem once. Try using a system user for searching, instead of the logged on user.
Like this:
com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getUserFactory().getUser("cmadmin_service");
Please reward the points if this helps. -
How to get the values of all elements and sub elements from following xml
how to get the values of all elements and sub elements from following xml...
<?xml version="1.0" encoding="UTF-8" ?>
<List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
<TransactionID>TransactionID</TransactionID>
<Match>
<Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
<List_Matched_Field>
<FSFM_Matches>
<NUMBER>NUMBER</NUMBER>
<TERROR>TERROR</TERROR>
<TU>TU</TU>
<NAMEU>NAMEU</NAMEU>
<DESCRIPT>DESCRIPT</DESCRIPT>
<KODCR>KODCR</KODCR>
<KODCN>KODCN</KODCN>
<AMR>AMR</AMR>
<ADDRESS>ADDRESS</ADDRESS>
<SD>SD</SD>
<RG>RG</RG>
<ND>ND</ND>
<VD>VD</VD>
<GR>GR</GR>
<YR>YR</YR>
<MR>MR</MR>
<CB_DATE>CB_DATE</CB_DATE>
<CE_DATE>CE_DATE</CE_DATE>
<DIRECTOR>DIRECTOR</DIRECTOR>
<FOUNDER>FOUNDER</FOUNDER>
<TERRTYPE>TERRTYPE</TERRTYPE>
</FSFM_Matches>
<OfacMatchDetails>
<UID>UID</UID>
<TITLE>TITLE</TITLE>
<SDNTYPE>SDNTYPE</SDNTYPE>
<REMARKS>REMARKS</REMARKS>
<ID_UID>ID_UID</ID_UID>
<IDTYPE>IDTYPE</IDTYPE>
<IDNUMBER>IDNUMBER</IDNUMBER>
<IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
<ISSUEDATE>ISSUEDATE</ISSUEDATE>
<EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
<ADDRESS1>ADDRESS1</ADDRESS1>
<ADDRESS2>ADDRESS2</ADDRESS2>
<ADDRESS3>ADDRESS3</ADDRESS3>
<CITY>CITY</CITY>
<STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
<POSTALCODE>POSTALCODE</POSTALCODE>
<COUNTRY>COUNTRY</COUNTRY>
</OfacMatchDetails>
</List_Matched_Field>
</Match>
</List_AML_Finacle>avoid multi post
http://forum.java.sun.com/thread.jspa?threadID=5249519 -
I have Bose Quiet Comfort Headphones. I am unable to insert the male end all the way into the IPAD3. I do have sound in the headphones, however. Is this common for most headsets on the IPAD3?
No, it's not common for any of the headphonse I've plugged into my iPad, but that doesn't mean it isn't normal for this particular set of headphones and iPad. That said, are you sure you've pushed the plug in all the way? I have found that on my New iPad, the headphone plug requires more effort to connect the plug than on my previous iPad 2. If they sound fine, I guess I wouldn't be concerned. If they don't sound good, it could be an issue.
-
Acrobat does not opens a PDF in the Browser at all times
Required:
I need to ensure Acrobat opens a PDF in the Browser at all times, and not have Reader hijack the task. All fixes for this I have found won’t work as they render Reader inoperable. i.e. uninstalling Reader or denying users to the Reader executable AcroRd32.exe
Situation:
I have a problem with Adobe Reader and Acrobat Standard 8.2.5. This is on a Terminal Server 2003 with 10 users. They require both Acrobat and Reader be accessible due to specific 3rd party applications related to banking software.
Problem:
They must open PDFs in a browser with Acrobat so they may fill the forms and save them. Acrobat doesn’t consistently open the file; Reader hijacks the file when clicked to open and their ability to fill the forms is hindered.
- Open PDF in browser is checked in Acrobat
- Open PDF in browser is NOT checked in Reader
Sometimes when the Acrobat desktop icon is clicked, Reader opens instead. Having Acrobat open in the background does help but is not consistent.
Also uninstalling Reader from the Server is unacceptable due to a 3rd party banking application for loans. This application is hard coded to open AcroRd32.exe within the application for opening PDFs.
Any suggestions would be greatly appreciated.
KenTry this, when I right clicked on the document to rotate the image a noticed a tool bar appeared at the bottom of the page with the save icon. It then disappeared, but by hovering at near the bottom of the document the tool bar appears and I can save the PDF.
-
The server was unable to save the form at this time. Please try again
Having created a new custom list (even with only a text field) I am unable add new items to the list - the error message is Unexpected
response from server. The status code of response is '0'. The status text of response is ''. when in 'quick edit'.
If I try to add or modify an item in the list by clicking 'add new item' I get "The
server was unable to save the form at this time. Please try again."
I have restarted the Sharepoint Search Host Controller server but to no avail. I have 24Gb RAM for this server so it's not a
memory issue (8Gb available). I have also tried from various browsers including Chrome and Safari - still the same error message.
This error only occurs on lists. I can edit document properties in a library and have no problems with calendar entries.
There are no entries in the event viewer, so where do I need to begin looking to find out what is (or rather is not) happening?One thing I noticed in SP 2013 is that if your list has unique permissions and a user/group has permissions only on that list and has limited or no access at the site level, then you run into this error: "The server was unable to save the form at this time.
Please try again."
This can be resolved by either giving that user/group atleast read access at the site level or in my case I had to create a new permission set (since we cant update limited access permission set) which is same as limited access but with the additional permission
of "Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site."
I am not sure if this is a bug or as per design, but not allowing a user who has needed permissions at the list level but limited access at site level doesnt seem right. Never ran into this issue in prior version of SharePoint. I tested and this additional
permission doesnt seem to violate any security at site level. But implement this at your risk. No guarantees provided and not responsible for any issues with this implementation if any. -
BC4J VSM - Unable to determine the value of OC4J_HOME
I'm on step 8 of the "Configuring the application" section and I'm getting the error "Unable to determine the value of OC4J_HOME" after running bc4j2oc4j.bat.
Seems that the instruction assume that the OC4J_HOME is already set, so I set a system variable OC4J_HOME to C:\oracle\JDev903.1\j2ee\home. I then re-run bc4j2oc4j.bat and get the same error and now I'm totally lost.
Also, given that I using W2K and want to get the BC4J-VSM app deployed to 9iAS, not the stand-alone server, should not the OC4J_HOME be set to 9iAS?
Need some help.
Thanks,
Bill G...Hi Neelesh,
I have set the OC4J_HOME as you suggested and then ran the bc4j2oc4j script. I then started JDeveloper, opened the VSM workspace, created db connections, made sure that Struts Commons classpath is pointing to jars in <JDEV_HOME>/jakarta-struts/librebuilt, then Rebuilt VSM-BC4J.jws. Then tried to run the VSM app within JDeveloper and I get the error listed below from the browser as the app tries to load.
Bill G...
500 Internal Server Error
java.lang.NoClassDefFoundError: org/apache/commons/logging/LogFactory
void org.apache.struts.action.ActionServlet.<clinit>()
ActionServlet.java:375
java.lang.Class java.lang.Class.forName0(java.lang.String, boolean, java.lang.ClassLoader)
native code
java.lang.Class java.lang.Class.forName(java.lang.String, boolean, java.lang.ClassLoader)
Class.java:195
com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletInstanceInfo com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication.loadServlet(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].util.ByteString)
HttpApplication.java:1890
com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletInstanceInfo com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication.findServlet(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].util.ByteString)
HttpApplication.java:4355
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication.initPreloadServlets()
HttpApplication.java:4455
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication.initDynamic(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplicationConfig)
HttpApplication.java:662
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication.<init>(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.Application, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpSite, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplicationConfig, java.lang.String, java.lang.String, boolean)
HttpApplication.java:435
com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.Application.getHttpApplication(java.lang.String, java.lang.String, boolean, long, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpSite, boolean)
Application.java:695
com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpServer.getHttpApplication(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplicationReference, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpSite)
HttpServer.java:676
com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpApplication com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpSite.getApplication(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].util.ByteString)
HttpSite.java:388
boolean com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.ApplicationServerThread, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletRequest, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
HttpRequestHandler.java:407
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(java.lang.Thread)
HttpRequestHandler.java:259
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run()
HttpRequestHandler.java:106
void EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run()
PooledExecutor.java:803
void java.lang.Thread.run()
Thread.java:484 -
I downloaded, and paid for, Photoshop Elements 13. At first I was able to open the editor only when I made an adaption to the Task Manager Processes(at the recommendation of one of the forums) but now I am unable to open the editor at all.
Can you try opening Editor directly from the exe available at:
C:\Program Files\Adobe\Photoshop Elements 13\PhotoshopElementsEditor.exe
If it still does not open, are you seeing an error message when you try to open Editor?
Thanks,
Anwesha
Maybe you are looking for
-
Running Mac OS X Lion 10.7.5 2008 MacBook Trying to print from iCal: File -> Print. My "Day", "Month", and "List" views all preview and print correctly. The issue is with my "Week" view. For whatever reason, it doesn't cooperate. I've included screen
-
Missing email after upgrade to 10.4.6 from 10.3.9
Hi, I recently upgraded from Panther to 10.4.6. All seemed to go well except with my Mail. All my mail box folders imported fine, but my unsorted Inbox is missing about three months worth of email. I went to my backup on my trusty external harddrive
-
I updated the iphone 3G and it didnt finish the update
I updated my iPhone ecause i thought it would be the right thing to do but it didn't finish the update and instead it said ERROR 21, what is this. it won't let me restore me iphone, it just shows the little apple logo on the screen when i click resto
-
Is object tag supported by ICEBrowser
Hi, Can we use an Object tag to embed a lightweight JavaBean component in an HTML? The following was working with JavaHelp: <OBJECT classid="java:javax.swing.JButton" width=460 height=160> <param name="text" value="Hello World!"> </OBJECT> Also I not
-
On my ibook G4v 10.4.7, I have itunes v 4.7.1(30) and even though I have downloaded the newest itunes version I still cannot get my itunes to recognize the shuffle to sync my music onto it. What do I need to do to get music onto the new shuffle?