Unable to post 103 Mvt

Dear all.
I am doing 103 Mvt for the already completed Job order which was back after the completion of job order. Doing 103 in Trxn code MIGO by selecting GR --> Purchase order --> and giving the JO no.
Now i am getting the following error:
Document XXXXXXXXX does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
The document items have already been processed
(Suggest zero lines indicator set?).
the document items have been deleted or are blocked.
the document items have been created for a different plant.
(for reservations only) movements are not yet allowed for the reservation items.
(for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
A confirmation must exist for the document items.
The document items must be released first.
The document is an R/2 document.
Procedure
Make sure your entries are correct.
If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
If the document is
Pls anybody suggest and indicate what error i made and help me to solve this problem
Regs.
S.R

Hi,
Check the link:
Re: Internal order - error message M7064 when trying to post GR in MIGO
Regards,
Biju K

Similar Messages

Message determination for 103 mvt type

Hi all,
Can any one please tell me the reason for "Incorrectly Processed" message output for 103 movment. We have maintained all the indicators and output tab is getting appeared in the material document, but the status of the message shows "red colour".
We are not able to understand the reason for the incorrect processing of the message. Whether this is related to the "Print Parameter" which is maintained as Plant / storage location combination.
thanks & regards
Chaitanya Rayaprolu

Hi sir,
Iam new to SAP but juz giving a try to answer your question. 103 mvt type is for posting to GR blocked stock. ie. no accounting docs are generated. Are you trying to post to blocked stock or GR block stock.
Pls note that both are different..!!
Pls excuse me if Iam wrong...
Thanks & regards,
ashwin_.

Automatic creation of Purchase order not possible for 103 mvt type

Hi,
If i could configure "create p.o automatically", while doing G.R for mvt type 101,
why cannot i do the same with 103 mvt type.
I checked the checkbox "create p.o automatically" for movement type 103 and tried to do G.R for others using Mvt type 103.
It is throwing error as "Update control of movement type is incorrect (entry 103 x x).
Which entry controls the above my requirement?
Please advise .
Thank you.

Hi,
These are std which is provided my SAP, you can configure for automatic PO creation for 101 movt type only..........

Is it possible to create double grn (material document) against a 103 mvt type (gr blocked stock) . how to restrict it in system.

Actually we have gate entry system (103 mvt ) during migo and make 105 mvt against the 103 material doc.
and also have restriction to make double entry against the same material doc (103).
In po the amount is let 100 qty , but how po allow to make 200 qty.
Kindly point out What is the cause for it and how to restrict it.
The above showing the Line item no 1500 Double GRN is made against 103 mvt type bypass error msg. and po qty.

Yes Abhishek,
You are right i also agree with you , it is a standard sap , System never allow to change the error to
warning , i also tested in quality client it's ok.

Unable to post in MI07 for sales order stock - Error Check Table XMSSA

Hi,
When I try to post in MI07, I get the following error Unable to post - Error 'Check Table XMSSA
Unable to post - Error 'Check Table XMSSA: entry 0000000000010011000 CA01 E 1500004153 000010 does not exist
It has something to do with sales order stock. But I am not sure what is causing the issue.
SAP error details:
Check table XMSSA: entry 000000000010011000 CA01 E 1500004152 000010 does not exist
Message no. M7001
Diagnosis
In table XMSSA the entry 000000000010011000 CA01 E 1500004152 000010 is missing.
Procedure
Make sure your entries are correct.
If table has not been maintained correctly, please inform your systems administrator.
Any ideas?

Hi Guys ,
I have faced this same issue . Found OSS note 1360365 . The issue is resolved after implementing this note .
Regards
Rajmohan G

While making 103 mvt for PO error'Aceptance at vendor set for po Item'

Dear Sir,
While making 103 mvt for PO, we are getting error 'Acceptance at vendor set for PO item'
Rgs
Kumar

Hi
Check the PO delivery tab. Origin acceptance will be flagged. It means material is accepted at vendor's premises. You need to use movement type 107 which will take stock to valuated GR blocked stock.It means once you do 107 material is valuted in your books. Then 109 to bring to your stock. You should not do 103 and 105 if the origin acceptance is flaged in GR.
Regards
Antony

Dataguard Error in logs Unable to post result to client, status = ORA-16531

Hi,
we are getting the following error message in the data guard logs:
===================================================================
DG 2012-01-23-17:39:44 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:44 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:44 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:44 1000 2 771584732 Unable to post result to client, status = ORA-16531
DG 2012-01-23-17:39:45 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:45 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:45 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:45 1000 2 771584747 Unable to post result to client, status = ORA-16531
DG 2012-01-23-17:39:45 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:45 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:45 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:45 1000 2 771584756 Unable to post result to client, status = ORA-16531
===============================================================================
This is the LIVE system working properly, but i saw this error message in the logs and when i searched lot of sites for the ORA-16531,i got the reply as "COntact Oracle".
COuld you please anyone incase faced this error in data gurad server, share your experience here?
Server : Sun SOlaris SParc Netra -T2000
Database : Oracle 10g
# FDSCluster info
Cluster: vs2b
Member: Member1
User: fdsuser
Data Path: /var/opt/fds
Status: Running
# srvctl status asm -n `hostname`
ASM instance +ASM2 is running on node vs2b.
Guys please gimme some clue why iam getting this error mesage and what need to be done?
Regards,
Deeban

This is the LIVE system working properly, but i saw this error message in the logs and when i searched lot of sites for the ORA-16531,i got the reply as "COntact Oracle".Please log a SR.
Thanks,
Hussein

T code for generating 103 mvt. document report.

What is the T-code used for getting the document report for Movement type 103
the document should have the following fields
Material : Description: Qty on order: Qty received: Value
& also the costing elements applied ( example freight charges, customs packaging etc. )
Pls. let me know if any of the Tcodes comes close to meet this requirment

Hi, Try MB51 / MB59, with 103 Mvt type & 'Trans./Event Type' - WE,after executing go to details list (Ctrl + Shift + F12) here change the layout & check if you are able to achieve your requirement or get it developed by your abapers as per your requirement, no such std. report.

Unable to post depreciation.

Have configured Korea - AA. In AFAB doc is generated in AA for depreciation, but unable to post in FI System is prompting " Enter Section Code".
                                                                                Message class Message no. Message type
Enter a section code                                                                F5           885          E
Errors occurred during creation of FI documents ...                                 AA           766          E
Job cancelled after system exception ERROR_MESSAGE                                  00           564          A
Is there someone who have experienced the same error? Please share your views on how to resolve. Thanks Gippy

Dear Peers,
Thanks for the fast response. None of the solution were working. As usual error message was misleading us. Right solution was we had to set depreciation and accumulated depreciation account as non-tax relevant - This is Korea specific. After correcting the accounts , was able to post depreciation successfully.
Error message was bit misleading.
Once again thanks for all the immediate responses received.
Regards
Gippy

Unable to posting in serial order(MB31)

Hi Dear,
when we are posting in serial order (900000000269) with 22000 quantity then it is unable to posting in 22000 quantity.
message hasbeen written Exactly 22.000 serial numbers must be selected .
(instead of 7.173)
if we are posting order no with below 14000 quantity then it is posted correct. but above 14000 quantity it is unable to post the serial order number.

TYPES: BEGIN OF ty_mase,
          matnr   TYPE matnr,
          lsernr TYPE lsernr,
         alpha_numeric TYPE zalpha,
       END OF ty_mase.
DATA: wa_imase1(18) TYPE c,
       wa_mara       TYPE marc,
       wa_sernr      TYPE risernr,
       v_string(18) TYPE c,
       v_imase(18)   TYPE c,
       v_month(18)   TYPE c,
       v_year(18)    TYPE c,
       v_sernum(18) TYPE c,
       lv_name       TYPE c,
       wa_imase(6)   TYPE c,
       lin(10)       TYPE c,
       lv_month      TYPE char6,
       lv_year       TYPE char4,
       lv_datum      TYPE sy-datum,
       it_mase       TYPE TABLE OF ty_mase,
       lwa_mase      LIKE LINE OF it_mase.
CLEAR : wa_imase1,wa_mara,wa_sernr,v_string.
CLEAR : v_imase,v_month,v_year,v_sernum,wa_imase,lin,lv_name,lv_datum.
CALL FUNCTION 'MARC_SINGLE_READ'
   EXPORTING
     matnr = material_no
     werks = plant
   IMPORTING
     wmarc = wa_mara.
IF wa_mara-sernp = 'S001'.
   lv_datum = sy-datum.
* SELECT SINGLE alpha_numeric FROM mase INTO wa_imase1 WHERE matnr = material_no.
* SELECT SINGLE alpha_numeric FROM ZPP_SERAIL_NO INTO wa_imase1 WHERE matnr = material_no.
* IF wa_imase1 IS INITIAL.
*    wa_imase = wa_imase1 + 000001.
*    lv_name   = 'S'.
* ELSE.
*    lv_name   = 'S'.
*    v_imase   = wa_imase1.
*    v_sernum = v_imase+6(6).
*    wa_imase = v_sernum + 000001.
* ENDIF.
   v_year   = lv_datum+2(2).
   CASE lv_datum+4(2).
     WHEN '01'.
       v_month = 'JAN'.
     WHEN '02'.
       v_month = 'FEB'.
     WHEN '03'.
       v_month = 'MAR'.
     WHEN '04'.
       v_month = 'APR'.
     WHEN '05'.
       v_month = 'MAY'.
     WHEN '06'.
       v_month = 'JUN'.
     WHEN '07'.
       v_month = 'JUL'.
     WHEN '08'.
       v_month = 'AUG'.
     WHEN '09'.
       v_month = 'SEP'.
     WHEN '10'.
       v_month = 'OCT'.
     WHEN '11'.
       v_month = 'NOV'.
     WHEN '12'.
       v_month = 'DEC'.
   ENDCASE.
   SELECT SINGLE alpha_numeric
                 FROM zpp_serail_no
                 INTO wa_imase1
                WHERE matnr    = material_no
                AND   z_month = v_month
                AND   z_year   = v_year.
   IF wa_imase1 IS INITIAL.
     wa_imase = wa_imase1 + 000001.
     lv_name   = 'S'.
   ELSE.
     lv_name   = 'S'.
     v_imase   = wa_imase1.
     v_sernum = v_imase+6(6).
     wa_imase = v_sernum + 000001.
   ENDIF.
   CONDENSE wa_imase.
   CALL FUNCTION 'CONVERSION_EXIT_AUFNR_INPUT'
     EXPORTING
       input = wa_imase
     IMPORTING
       output = wa_imase.
   DO number_serialno TIMES.
     CONCATENATE lv_name v_year v_month wa_imase INTO v_string.
     CONDENSE v_string.
     wa_sernr-sernr = v_string.
     APPEND wa_sernr TO tab_sernr.
     wa_imase = wa_imase + 000001.
     CONDENSE wa_imase.
     CALL FUNCTION 'CONVERSION_EXIT_AUFNR_INPUT'
       EXPORTING
         input = wa_imase
       IMPORTING
         output = wa_imase.
     CLEAR v_string.
     CLEAR wa_sernr.
   ENDDO.
   SORT tab_sernr BY sernr ASCENDING.
   DESCRIBE TABLE tab_sernr LINES lin.
   CONDENSE lin.
   CLEAR wa_sernr.
   READ TABLE tab_sernr INTO wa_sernr INDEX lin.
   IF sy-subrc = 0.
*    SET PARAMETER ID 'MEM1' FIELD wa_sernr-sernr.
*    UPDATE mase SET alpha_numeric = wa_sernr-sernr WHERE matnr = material_no.
     EXPORT wa_sernr-sernr TO MEMORY ID 'MEM2'.
   ENDIF.
ENDIF.

Why am I unable to post comments from FF. I can do it from IE, but it takes ages. Virus etc. checked.

Two problems:
1. I am unable to post comments from FF, but I can do it from IE,
though it takes ages with IE. Checked for Virus etc. with McAfee,
ZoneAlarm and Spybot. FF versions 4 later changed to 12. Both
do not allow - just keeps waiting (tried up to about 1 hour). It
started about a month ago.
2. I am unable to attach .pdf files from FF in Yahoo Mail. It works
from IE - though it takes ages (script?).
I am using 'NO Script' from FF - but for most cases I have to
go to 'partially allowed' mode.
Thanks
SB

(1) As instructed I went to 'run' and typed in the code. It took me to 'xuowtwd1.default' folder under 'Profiles'. There were several files stored there and
I did not know what to do. Next...
(2). As suggested I went to 'troubleshooting Information' under 'Help' drop down list.
(3). Followed instructions, but could not find the 'Reset Profile' button.
(4). It said the instructions were not for my version (V12) of FF.
(5). Downloaded V. 14.0.1
(6). Will not install. As mentioned earlier I am using Windows 2000 (p.s.initial
complaint)

Unable to post on our blog or update our website..

Please Help!!!!
Ever since purchasing our AE 802.11n, and installing it for our home use (We have a Dual 2GHz PowerPC G5) we have been unable to post updates to our blog that is hosted through our idisk through our .mac account, and also we've been unable to post updates to our website that is hosted through bluehost.com. Please help!!! We desperately want to update our work, and are unable to... Is it something with the AE that won't allow me to connect to either of this to post??? The internet has been working fine and great, and I can connect to my idisk using finder... I have no idea what to do!!!!
AAAAHHHHHHHHHHHH!

Try Web Chat (you need applecare)
http://www.apple.com/support/chat
Don't know otherwise.

Unable to post cash receipt in cash Journal-FBCJ

HI All,
I am unable to post cash receipt in cash Journal-FBCJ. It is showing below error.
Also i have created Number ranges for 01. Please advice.
"For object CAJO_DOC2 AMZN, number range interval
01 does not exist"

Hi Venkat,
The steps involved in cash journal configuration are defined at one configuration area
The steps are :
1. Create general ledger account for cash journal
Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash Journal >
Define gl account for cash journal
2. Define Document type for cash journal
spro > Financial Accounting > Bank Accounting > Business Transactions > Cah Journal >
Define document type for cash journal
3. Define Number ranges for Cash journal
Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash journal >
Define number ranges
4. Set up cash journal
Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash journal >
Set up cash journal
5. Define business transactions for cash journal
Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash journal >
Define business transactions for cash journal
6. Run cash journal
FBCJ transaction code to use the cash jounal.
You should first have the opening balance to carry out any transactions.
Please try this, this should help you. Any updates please let me know.
Thanks & Regards

UNABLE TO POST OF PARK DOCUMENT

Dear cons
i am unable to post park document . At the time of post the document the system gives a messagethat " order price quantites leads to incorrect po history. Note that order qty is MT & ORDER PRICE QTY in %. PL. solve my problem so that i CAN POST THE PARK DOCUMENT.
THANKS
NIRUPAMA

Hi,
Goto OLMR-->Invoice block> tolarence key--
>see tolarance keys BR and BW and choose dont check or increse the tolarance limits
Regards
S.Baskaran

Unable to post cancellation invoice to accounting.

Hello Experts,
I have one scenario in which the user has done Order ->Delivery ->Invoice -> Accounting documnent is Cleared. he created Cancellation invoice and trying to post the cancellation document to accounting. but system is giving error message unable to post document because foreign trade data is missing. therefore unable to post the document to account. Document flow is as follows.
Order - Completed
Delivey -Completed
Invoice -Completed
Accounting Doc-Cleared
Cancellation Invoice - Missing export data
The invoice and cancellation was created a year before. and user didn't face any problem while posting normal (F2) invoice to accounting. system did not throw the same error message.
Now, user want to post the cancellation document to accounting. Kindly let me know what can be done in this case.

Hello
You cannot cancel a cleared invoice and post it to accounts. if it is alredy cleared then what is the use of cancellation and what would happen to the payemnt received from customer ?
you can reverse the clearing done for the invocie , then create cancellation document and post it
you would also have to open the periods one year back !!
Hope this helps
Thanks
akasha

Unable to post 103 Mvt

Similar Messages

Maybe you are looking for