Unable to post a journal this month . The journal posted fine prior mnths

Hi ,
We are trying to post a journal like we do every month for 1 facility and this month it gets stuck in processing . The error logs hints to ACCT segment , but the acct code combination being used is a valid one.
The journal is uploaded using Web ADI ... it uploads fine , but errors out during posting . The aacount combination is giving trouble only with 1 facility , others posted normally as they have in prior months.
The log below says : "Please enter a value for the parameter or segment ACCT" , But the ACCT segment is present on the Web adi upload file .
Can some one please provide direction ? I ahve tried to create and post manually too.. same error.
Thanks
General Ledger: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
GLPPOS module: Posting
Current system time is 23-JAN-2012 07:22:03
glpmai() 23-JAN-2012 07:22:03PPOS0003: *** Posting Process Started ***
PPOS0004: All phases to posting will be detailed in this log.
PPOS0219: glpmai() - Your Posting Run ID is 17387
glpini() 23-JAN-2012 07:22:03
gllock() 23-JAN-2012 07:22:03
gludlk() 23-JAN-2012 07:22:03<< gludlk() 23-JAN-2012 07:22:03
<< gllock() 23-JAN-2012 07:22:03
glusts() 23-JAN-2012 07:22:03
glucce() 23-JAN-2012 07:22:03
glugsn() 23-JAN-2012 07:22:03<< glugsn() 23-JAN-2012 07:22:03
<< glucce() 23-JAN-2012 07:22:03
<< glusts() 23-JAN-2012 07:22:03
glpuch() 23-JAN-2012 07:22:03<< glpuch() 23-JAN-2012 07:22:03
glpueh() 23-JAN-2012 07:22:03<< glpueh() 23-JAN-2012 07:22:03
<< glpini() 23-JAN-2012 07:22:03
glppva() 23-JAN-2012 07:22:03<< glppva() 23-JAN-2012 07:22:03
glpmpi() 23-JAN-2012 07:22:03
gluddl() 23-JAN-2012 07:22:03<< gluddl() 23-JAN-2012 07:22:04
gluddl() 23-JAN-2012 07:22:04<< gluddl() 23-JAN-2012 07:22:04
gluddl() 23-JAN-2012 07:22:04<< gluddl() 23-JAN-2012 07:22:04
gluddl() 23-JAN-2012 07:22:04<< gluddl() 23-JAN-2012 07:22:04
gluddl() 23-JAN-2012 07:22:04<< gluddl() 23-JAN-2012 07:22:04
<< glpmpi() 23-JAN-2012 07:22:04
glpcjl() 23-JAN-2012 07:22:04<< glpcjl() 23-JAN-2012 07:22:04
glpcbs() 23-JAN-2012 07:22:04<< glpcbs() 23-JAN-2012 07:22:04
glpisl() 23-JAN-2012 07:22:04<< glpisl() 23-JAN-2012 07:22:04
glpiil() 23-JAN-2012 07:22:04
glpiaie() 23-JAN-2012 07:22:04SHRD0118: Updated 0 record(s) in table: GL_JE_HEADERS
<< glpiaie() 23-JAN-2012 07:22:04
PPOS0247: No actual balances were found in the intercompany journals.
glpiiel() 23-JAN-2012 07:22:04<< glpiiel() 23-JAN-2012 07:22:04
<< glpiil() 23-JAN-2012 07:22:04
glphok() 23-JAN-2012 07:22:04<< glphok() 23-JAN-2012 07:22:04
glperp() 23-JAN-2012 07:22:04<< glperp() 23-JAN-2012 07:22:05
glpipi() 23-JAN-2012 07:22:05
glusts() 23-JAN-2012 07:22:05
glucce() 23-JAN-2012 07:22:05
glugsn() 23-JAN-2012 07:22:05<< glugsn() 23-JAN-2012 07:22:05
<< glucce() 23-JAN-2012 07:22:05
<< glusts() 23-JAN-2012 07:22:05
GL_POSTING_INTERIM_17387
SHRD0117: Inserted 24 record(s) into GL_POSTING_INTERIM_17387
SHRD0117: Inserted 0 record(s) into GL_POSTING_INTERIM_17387
glugst() 23-JAN-2012 07:22:05<< glugst() 23-JAN-2012 07:22:05
glpip2() 23-JAN-2012 07:22:05
glusts() 23-JAN-2012 07:22:05
glucce() 23-JAN-2012 07:22:05
glugsn() 23-JAN-2012 07:22:05<< glugsn() 23-JAN-2012 07:22:05
<< glucce() 23-JAN-2012 07:22:05
<< glusts() 23-JAN-2012 07:22:05
PPOS0206: No statistical amounts in monetary journal entries found ...
<< glpip2() 23-JAN-2012 07:22:05
<< glpipi() 23-JAN-2012 07:22:05
glpire() 23-JAN-2012 07:22:05
glusts() 23-JAN-2012 07:22:05
glucce() 23-JAN-2012 07:22:05
glugsn() 23-JAN-2012 07:22:05<< glugsn() 23-JAN-2012 07:22:05
<< glucce() 23-JAN-2012 07:22:05
<< glusts() 23-JAN-2012 07:22:05
glpidff_de_concat_flexfield() 23-JAN-2012 07:22:05<< glpidff_de_concat_flexfield() 23-JAN-2012 07:22:05
Please enter a value for the parameter or segment ACCT.
01CANTP--000-0000-000-00-000000-0000-FACOE-00
SHRD0030: glpire() encountered an error returning from errexit:
<x glpire() 23-JAN-2012 07:22:05
gluerr() 23-JAN-2012 07:22:05Error in ROUTINE: glpire, status: 0
SHRD0043: ERROR:
sqlcaid: sqlabc: 0 sqlcode: 1403 sqlerrml: 25
sqlerrmc:
ORA-01403: no data found
sqlerrp:      sqlerrd: 0 0 0 0 0 0
sqlwarn: sqltext:
SHRD0044: Process logging off database and exiting ...
glpuch() 23-JAN-2012 07:22:05<< glpuch() 23-JAN-2012 07:22:05
glpueh() 23-JAN-2012 07:22:05<< glpueh() 23-JAN-2012 07:22:05
glpdit() 23-JAN-2012 07:22:05
gluddl() 23-JAN-2012 07:22:05<< gluddl() 23-JAN-2012 07:22:05
<< glpdit() 23-JAN-2012 07:22:05
PPOS0002: Posting terminated with fatal errors
<x glpmai() 23-JAN-2012 07:22:05
Executing request completion options...
Finished executing request completion options.
GLPPOS - process exiting with failure.
Exceptions posted by this request:
Concurrent Request for "Posting" has completed with error.
Concurrent request completed
Current system time is 23-JAN-2012 07:22:06
---------------------------------------------------------------------------

Hi , Thanks for the reply ... But no luck .
The account is not disabled or end dated as it is used by other faclities in the same batch .
We have total 8 lines in the batch ( 2 lines for each of the four facilities ; 1 Db and 1 cr line each). Apart from the 1st segment (facility number) the rest of the code combination is same for all 8 lines .
If i remove the 2 lines (for 01CANTP) for the trouble maker facility , the remaining 6 lines post normally.
Even checked the value set for facility codes to see if thats disbaled or end dated. But it was enabled.
No changes have been made to cross validation rules since last closing , when the same journal worked.
Any other place where to look ?
     01USAX     503003     000     0000     000     00     000000     0000     COE     00          4,000.55
     01USAX     222099     000     0000     000     00     000000     0000     COE     00     4,000.55     
     01USCV     503003     000     0000     000     00     000000     0000     COE     00     248.96     
     01USCV     222099     000     0000     000     00     000000     0000     COE     00          248.96
     01USSP     503003     000     0000     000     00     000000     0000     COE     00          845.00
     01USSP     222099     000     0000     000     00     000000     0000     COE     00     845.00     
     *01CANTP     503003     000     0000     000     00     000000     0000     COE     00          9,351.19*
     *01CANTP     222099     000     0000     000     00     000000     0000     COE     00     9,351.19*

Similar Messages

  • HT4722 I downloaded the trial version of Final Cut Pro, but am unable to install it.  This is the final name, 'FinalCutProTrial10.0.6.dmg.crdownload'.  What do I need to unzip it or install it?   Thank you.     Rob-

    I downloaded the trial version of Final Cut Pro, but am unable to install it.  This is the final name, 'FinalCutProTrial10.0.6.dmg.crdownload'. 
    What do I need to unzip it or install it?  
    Thank you.     Rob-

    It says: There is no application set to open the document “FinalCutProTrial10.0.6.dmg.crdownload”,
    when I try to click on the file.  It has downloaded completely. 

  • My data package reloads every month.  This month the counter in settings didn't reset.  whats wrong?

    My cell provider reloads my acccount with a fresh 4G every month.  The 5c used to track usage.  This month it did not reset.  Whats wrong?

    Sounds like a problem with your carrier. Contact your carrier to find out why your data level was not updated.

  • TS3899 I get the following message when I try to send email from my IPAD, "a copy has been placed in your outbox, " it tells me I have exceeded my storage limit. How can I rectify this. The account works fine on the IMAC just not on the IPAD?

    When I try to send an email from my iCloud account on my IPAD I get the message that a copy has been saved to outbox as my storage limit has been reached. It works fine on the main computer but not on the ipad. How can I mend this?

    I have just encountered exactly the same issue for the last 24 hrs - mail goes to outbox from iPad yet send OK from icloud account on my powerbook. Tried resetting the push email settings on the iPad but no chnage.

  • TS1398 I have tried all of the above and am still unable to connect to my home broadband, the pc is fine and so was the itouch up until yesterday, any help would be gratefully received.

    Yesterday my wifi would not work on my itouch, it has been fine since purchasing.  Today I have tried everything mentioned by supporters including restoring the itouch, but just get the message "unable to join the network". Anyone have any more tips?

    Are you positive you are entering in the correct password?  Have you tried rebooting the router by unplugging it from power for about 30 seconds or so?
    What happens if you head to Settings -> General -> Reset, tap Reset Network Settings, and then try to reconnect to your home Wi-Fi network.
    B-rock

  • TS1424 I have down loaded a rental from itunes. It won't play and this is the message that comes up. itunes store error_42110? .

    I have down loaded a rental from itunes, but am unable to play it. This is the message that comes up. itunes store error_42110? .

    Welcome to the Apple Community.
    This may be an authorisation issue.
    http://support.apple.com/kb/TS1389

  • Hotmail and Aol adresses bouncing my newsletters since this month

    Hello,
    This month, the last newsletter I sent reported hard bounces from some of my customers with hotmail.com and aol.com email adresses.
    The report says "bad destination system adress (5.1.2. bad destination system: no such domain)"
    I´m certain that these adresses are correct as they have received previous newsletters and invoices. In fact, one of them appears to have received the last newsletter, despite the system claiming it to hard bounce and automatically unsubscribing him.
    Hope there is a way to fix this.
    Thank you very much for your help.

    Hi Vicky,
    As mentioned in the ticket that you raised with us the reason why some of the Hotmail addresses are still bouncing is because they are listed on our internal blacklist. When your customer sent the campaign mentioned in the ticket some of the emails hard bounced and they were placed in our internal blacklist to avoid sending emails to addresses that are not existing over the Internet. If you check the campaign openings you will see customers that opened the campaign and are using Hotmail services.
    So in this case there wasn't a DNS route issue as it was in the case of Road Runner.
    From my knowledge if you do not login for over 90 days to your Hotmail account they can and will delete the account making the email address invalid over the Internet.
    So as mentioned in the ticket if you want to send them emails you need to validate that those email addresses exists over the Internet.
    This can be done ONLY by sending the double opt-in email and they need to confirm that they want to receive emails. Once they access the confirmation link from the email the address will be removed from our internal blacklist and you will be able to send them emails once again.
    Please note that forcing the double opt-in option from the admin panel will not work as we need to see that the email address is valid over the Internet.
    I hope this helps!
    Andrei Duca

  • I just installed Mozilla Firefox 3.6. This is the first time have have installed Firefox. My problem is I no longer have the screen which lists which plugins need updating and researching. How can I find out which plugins need updating or researching?

    After installation it told me to update or research several plugins. I updated Silverlight and JAVA. I was instructed to shut down and restart my computer to test the JAVA installation. I did this and the installation is fine. At this point I no longer had the screen with the list of plugins that need updating or researching.

    THis is probably the page you saw.
    http://www.mozilla.com/plugincheck/
    You can also access it from the Firefox menu by clicking "Tools -> Add-ons -> Plugins" and then clicking the Find Updates button at the bottom.

  • HT3204 I have been receiving the error message ...'iTunes store is unable to process purchases at this time.  Please try again later"  over that  last month with increasing frequency

    I have been receiving the error message ...'iTunes store is unable to process purchases at this time.  Please try again later"  over that  last month with increasing frequency.  What is the cause and solution?

    Hello e-b p,
    Thanks for the question, and welcome to Apple Support Communities.
    When encountering iTunes Store connectivity issues, the following resources provide the best solutions. To isolate the issue further, I'd be curious to know if it persists on other Wi-Fi networks (assuming you are using a portable computer). Either way, please attempt the steps outlined in these articles:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thanks,
    Matt M.

  • Unable to post cash receipt in cash Journal-FBCJ

    HI All,
    I am unable to post cash receipt in cash Journal-FBCJ. It is showing below error.
    Also i have created Number ranges for 01. Please advice.
    "For object CAJO_DOC2 AMZN, number range interval
    01 does not exist"

    Hi Venkat,
    The steps involved in cash journal configuration are defined at one configuration area
    The steps are :
    1. Create general ledger account for cash journal
    Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash Journal >
    Define gl account for cash journal
    2. Define Document type for cash journal
    spro > Financial Accounting > Bank Accounting > Business Transactions > Cah Journal >
    Define document type for cash journal
    3. Define Number ranges for Cash journal
    Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash journal >
    Define number ranges
    4. Set up cash journal
    Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash journal >
    Set up cash journal
    5. Define business transactions for cash journal
    Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash journal >
    Define business transactions for cash journal
    6. Run cash journal
    FBCJ transaction code to use the cash jounal.
    You should first have the opening balance to carry out any transactions.
    Please try this, this should help you. Any updates please let me know.
    Thanks & Regards

  • Book revenue on this month but the cost of goods sold need to get from last month

    Hi experts,
    I have a question about cost and revenue. We have a standing service repair order and a contract to customer. Because the revenue is calculated by flight cycle so maybe when we get the flight cycle information for this month should be the midle of next month. Due to the monthly end close schedule I need to book the revenue on this month but the cost of the revenue we need the get the cost occur last month. For example, current month is May, 2014 and I book the revenue and posting date is May, 31, 2014. But the cost I just want the amount occurred in customer service order(IW31) on Apr, 2014. And the cost occured in May, 2014 should become WIP. Is it possible? Please advise.
    Thanks and Best Regards,

    Hi experts,
    I have a question about cost and revenue. We have a standing service repair order and a contract to customer. Because the revenue is calculated by flight cycle so maybe when we get the flight cycle information for this month should be the midle of next month. Due to the monthly end close schedule I need to book the revenue on this month but the cost of the revenue we need the get the cost occur last month. For example, current month is May, 2014 and I book the revenue and posting date is May, 31, 2014. But the cost I just want the amount occurred in customer service order(IW31) on Apr, 2014. And the cost occured in May, 2014 should become WIP. Is it possible? Please advise.
    Thanks and Best Regards,

  • Disk Utility: after creating the .DMG (compressed image) When "scan image for restore" finishes it displays "unable to scan (internal error)". Since the process was scanning for about 1 hr is this a fake warning?

    External 500GB drive is partitioned with 400GB for Mac OS extended (journalling) and 2nd partition formatted today as "ExFAT".
    Yesterday I tried to create a disk image of my HD to no avail - this was compressed on a FAT partition. I got a warning after running the <scan image for restore> saying "unable to scan (internal error)"
    I rang Apple support who suggested formatting a partition as MAC OS extended (journalling) and choose to save the image as "read/write'. The image process stopped writing at about 200GB and then the file size jumped to 499GB (ie the size of the HD). But the process did nothing for about an hour so I foce quit disk utility (as suggested by apple support)
    My current attempt was to format the external drive again; this time with a 400GB Mac OS extended (journal) format; plus a 100GB ExFAT format partition. The new image was created after about 2.5hrs with a compressed size of 149GB. However, after running the "scan image for restore" facility I got the warning message "unable to scan filename " (internal error). The process was scanning the image file according to the progress bar - this took about hour - thus the warning is a puzzle.
    If anyone can say more about this error I would really appreciate knowing tips for using disk utility. The screen grab is below.
    "unable to scan filename " (internal error)
    thanks

    Thanks for a quick reply <baltwo>. You’ve answered that it is not a fake message!
    fyi: I thought that I would use my external Buffalo for two purposes; namely the smaller ExFAT partition for copying stuff to my win7 netbook. The larger partition was to be used as my imac image of SL. So this was my first attempt at using disk utility - the idea being to hold an image backup at another location. Plus I now have the Lion thumbdrive ready to upgrade from SL and so being cautious wanted to have a SL image backup
    Anyway I followed the apple instructions using my mac 10.6.3 install DVD but it would appear from other discussions that <unable to scan (internal error)> is not unique to me.
    I’ll get back to apple telephone support for further advice.
    I would though be grateful for an “idiots’ guide to making an image backup of my internal HD that runs SL 10.6.8
    eg should I have just one partition on the external USB drive? format it as Mac OS extended? create the image as compressed or read/write? Basically I’ll do whatever will work!!
    thanks again

  • Unable to post return delivery whne the input material is batch managed

    Hi,
    While clearing the Subcontract GRN where the input material is batch managed, unable to put return delviery and the system throws error and unable to complete quantity posting.
    Please guide me.
    Regards,
    RR Gopalan

    This is caused due to some technical restrictions in QM.
    When the reverse movement is being posted through QM process, the goods movement is being created in the background and it is being posted without reference to a existing material document. That is the system behaves as if you create a return delivery via MB01. In this case, the system cannot determine the batch number. As the reverse is created in the background and the components are determined internally and the batch cannot be passed over from the QM transaction. To prevent postings and avoid unnecessary inconsistencies in stocks,system will issue the error message.
    Workaround:
    The message M7389 is configurable. Hence please check in transcation OMCQ and set this as warning message. This would allow you to post the return delivery, But the problem is the batch nubmer would be wrong. So, You can define the corret batch number in the user-ext MBCFC010, it's MM related, You'd better to work with your MM colleagues.
    Best Regards,

  • I upgraded to the Samsung Galaxy S5 two months ago. I'm still unable to sync or move contacts from the phone into my 2012 Toyota Camry. I've been to the dealership to have them look at my car. It also has been tried in 2 different 2014 models. I don't kno

    I upgraded to the Samsung Galaxy S5 two months ago. I'm still unable to sync or move contacts from the phone into my 2012 Toyota Camry. I've been to the dealership to have them look at my car. It also has been tried in 2 different 2014 models. I don't know if it's a Verizon/Samsung issue but I'm quite upset about it. I would have stayed with the S4 if I had know so many issues were on the horizon. I need a fix. Please help.@

    carolinechx wrote:
    i know the description may be a little bit too confusing
    Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

  • Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

    Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

    Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
    If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
    Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
    Hope this helps.
      Windows XP  

Maybe you are looking for

  • WebLogic 6.1 sp2 POSIX error?

    get this error on the log, HP-UX 11i, what is fd: and revents: ? anyone have any idea what this error is about? ####<Jan 2, 2003 11:51:11 AM EST> <Error> <HTTP> <cofhvp04> <coep> <ExecuteThread: '19' for queue: 'default'> <> <> <101083> <Connection f

  • Different result from same SQL statement

    The following SQL statement brings back records using query analyzer on the SQL server. However when I run it in a cold fusion page it comes back with no results. Any idea why???????? SELECT COUNT(h.userID) AS hits, u.OCD FROM dbo.tbl_hits h INNER JO

  • Bex Ajust Query Warning message

    Hi, When I run by bex report in browser I get the message "Characteristic XXX was changed in infocube ABC.Adjust the query" I retransported the query but no change. How do I adjust the query?

  • Form Update Issue in Dreamweaver

    Hi there, I have created an update form using Dreamweaver and an Access database. When you load the update form. Some of the text fields are empty. If you do not enter something in one of these fields and hit the update button. You get the following

  • I need to disable a weak SSL.

    My Retina scans are showing a week vulnerabilty for: EXP-RC4-MD5 assosicated with beasvc.exe on port 5556 I need to disable SSL_RSA_WITH_RC4_40_MD5 How do I disable this ?? Do I need to do something in the config.xml file?