Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (File already open with with write permission)
When I click on finalize project or when I tried to share on Vimeo iMovie goes through this ten hour operation and the, somethime while I'm away from the computer, I get this error message. UNABLE TO PREPARE PROJECT FOR PUBLISHING. The project could not be prepared for publishing because an error occurred. (File already open with with write permission).
This has happened to me before and I can't nail down the particulars of when this happens. I will say I've never been able to Finalize A Project (not even sure what than means) but I have been able to publish short films to YouTube. This current film is a little over an hour and I picked the HD Format. Could the size have something to do with it?
See the discussion here:
https://discussions.apple.com/message/16784714#16784714
Similar Messages
-
Get this message when I try to publish my iMovie project. "unable to prepare project for publishing the project could not be prepared for publishing because an error occurred. (file already open with write permission)"
See the discussion here:
https://discussions.apple.com/message/16784714#16784714 -
When I was updating my IPAD, I downloaded the latest Itunes version and then updated my IPAD. When it came to backing up my IPAD, I received an error saying it could not be backed up because an error had occurred. It told me to disconnect and try again. I did this three times and it still will not work. What else can I do?
You may need to put the iPad in recovery mode to restore it.
http://support.apple.com/kb/HT1808 -
Error in File UNKNOWN.RPT: The request could not be submitted for backgroun
I receive: Error in File UNKNOWN.RPT: The request could not be submitted for background processing.
The error is on a windows Server 2008 SP2 production server. The report generates fine if I run it from within Visual studio 2008 on the server but not through IIS. The Crystal Reports is the version that came with vs2008 (10.5).
Initially I was getting unauthorized access errors so I granted full access to everyone for the bin and managed crystal report folders under program files. This fixed the unauthorized access problem but now I get the background processing error. I also tried to inpersonate an admin account with the same result. I tried to copy the crystal reports dll's to the bin folder for the project but that did not help either. I am running out of ideas. I did notice that a 16kb rpt file is generated in the Windows/temp folder every time I try to run the report.
the crashing page is here Link:[http://futuretechgroup.com/cgi-bin/crystaltest.aspx]
Here is the event log:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 5/24/2010 12:24:56 PM
Event time (UTC): 5/24/2010 7:24:56 PM
Event ID: 87ee3d9297fb409ea7b440b059a0f07d
Event sequence: 4
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/5172/ROOT-1-129192026961318172
Trust level: Full
Application Virtual Path: /
Application Path: C:\inetpub\vhosts\futuretechgroup.com\httpdocs\
Machine name: FTG2009
Process information:
Process ID: 3644
Process name: w3wp.exe
Account name: FTG2009\IWPD_1(yanoshftg)
Exception information:
Exception type: CrystalReportsException
Exception message: Load report failed.
Request information:
Request URL: http://futuretechgroup.com/cgi-bin/crystaltest.aspx
Request path: /cgi-bin/crystaltest.aspx
User host address: 70.173.237.72
User:
Is authenticated: False
Authentication Type:
Thread account name: FTG2009\IWPD_1(yanoshftg)
Thread information:
Thread ID: 5
Thread account name: FTG2009\IWPD_1(yanoshftg)
Is impersonating: False
Stack trace: at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at cgi_bin_CrystalTest.CreateReport() in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 15
at cgi_bin_CrystalTest.Page_Load(Object sender, EventArgs e) in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 9
at System.Web.UI.Control.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)1. The OS is 32bit
2. Yes. The C drive is the primary drive
3. For the sake of simplicity and to troubleshoot the sample code has no datasource just 'Hello' in the report header. The Actual work order report that I need has ADO as datasource and it builds a PDF report without any problems when I run the page from VS2008 (development server) so I think the dll's are where thay are supposed to be. The c:\windows\assembly folder has about 25 CrystalDecisions files (10.5.37).
Do I still need to create a deployment package even though I have everything else working?
Below is the code I am using to create the report
Sub CreateReport()
Dim myReport As New ReportDocument
'Try
myReport.Load(Server.MapPath("CrystalReport.rpt"))
'Catch ex As Exception
'MsgBox(ex.InnerException.ToString)
'End Try
Dim g As Guid = Guid.NewGuid
Dim woPath As String = "../FileTemp/" & g.ToString & ".pdf"
'Try
Dim CrExportOptions As ExportOptions
Dim CrDiskFileDestinationOptions As New _
DiskFileDestinationOptions()
Dim CrFormatTypeOptions As New PdfRtfWordFormatOptions()
CrDiskFileDestinationOptions.DiskFileName = _
Server.MapPath(woPath)
CrExportOptions = myReport.ExportOptions
With CrExportOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.PortableDocFormat
.DestinationOptions = CrDiskFileDestinationOptions
.FormatOptions = CrFormatTypeOptions
End With
myReport.Export()
'Catch ex As Exception
'MsgBox(ex.ToString)
'End Try
Response.Redirect(woPath)
End Sub -
The request could not be submitted for background processing.
Post Author: Chriss
CA Forum: Administration
It's an BOE XI SR2, on Win2k3 server, with a print cluster with two print spools, handling 3000+ printers. I discovered this error to be intermittent and only on one of the spools. It turned out that the only common factor was an HP4250 print driver. I backed all the 4250s down to 4200 drivers and the intermitent error ("Error in File. The request could not be submitted for background processing.") went from about 100 a day to zero. The other spool had a different version of the HP4250 driver and would on rare occassion cause this error, "Error in File ... Page header or footer longer than a page." but never the background processing error.
For reference, when I got this error in XI R1, this was the solution for 'the error with one name and many causes':The error "The request could not be submitted for background processing" can be related to a corrupt or wrong versioned crpe32.dll in the Crystal bin folder. Renaming to crpe32.dll_bak and using the repair command in the the "Add/Remove Programs" tool in the "Control Panel" will reinstall the correct dll. Then restart the Crystal services.Post Author: krishna.moorthi
CA Forum: Administration
For Crystal reports :
Error : "The request could not be submitted for background processing"
I think,this was not related to a corrupt or wrong versioned crpe32.dll.
but the below mentioned is one of the reason for getting this error.
I got the error when the main report(crystalreports10) having more than 2 subreports not assigned proper tables for the subreports.
Example: (this code raise the abone mentioned error.)
rpt.SetDataSource(Exdataset);
rpt.Subreports["subreportname1"].SetDataSource(Exdataset); // Exdatatset.Tables[1]
rpt.Subreports["subreportname2"].SetDataSource(Exdataset);// Exdatatset.Tables[2] -
Crystal Report Error "The requtest could not be submitted for backgroung p"
Our Web applciation is using ASP.Net Framework 2.0 and Crysal Report Assembly version is 10.2.3600.0
After fetching one particular report we are getting below error
"Error in file c:\windows\temp\FileName{1B044BEA-1C14-44DF-92DC-107455F949FD}.RPT
The requtest could not be submitted for backgroung processing."
There is no problem while fetching data from backend procedure. It runs without error.
Is there any hot fix for the same?We too are facing same challange with CrystalReports Version=10.2.3600.0
Can some body post resolution.
Thanks in advance.
-Murali -
Crystal Reports VS 2008 "The request could not be submitted for background processing"
Hi,
I am going to try to explain this issue the best I can. Please let me know if you need any other information or have any ideas as I have exhausted my resources. We have an ASP.NET application that has highly formatted crystal reports in them that the users can export as PDFs. All reports export without a problem when the application is run off of our desktops. The reports use a sql server authenticated user, executing stored procedures, and each subreport is linked by the main parameter. We are using Visual Studio 2008 version 3.5 SP1 with Crystal Reports Basic for Visual Studio 2008 on Windows 7 Enterprise SP1. We have designed the reports in Crystal Reports XI Release 2 (11.5.12.1838) and imported them into the ASP.NET application. When trying to export the reports as PDFs from the development or production servers, we get the error message below for some, not all, reports:
System.Runtime.InteropServices.COMException (0x800002AD): Error in File C:\Windows\TEMP\KeyAccountProfile {9FA5C095-77A2-425D-AC6B-8BB66B435336}.rpt: The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
We have cleared the temp directory on the servers before exporting and are still receiving the error. We have installed Crystal Reports Basic Runtime for Visual Studio (10.5.2.0) on both servers. I have identified the underlying issue to one stored procedure/subreport that is causing the report to fail. The weird thing is, when we change the connection to point to development, the stored procedure/subreport runs fine for the report that generates an error when run from production, and the data is the exact same. I have tried rebuilding the subreport but the error still appears even though it runs fine for other reports.
I have been through the document below, and othe similar issues in the forums, but still have not found a resolution. I was trying to use the "modules" application put since this is an ASP.NET application I am unsure of which executable I should be looking at.
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33?QuickLink=index&overridelayout=true&36837934524320
Thanks in advance for your assistance,
Brad Hood
06-26-14
OK.. I did some more investigating on this today. I have found out when I move the sub report that generates the error under another sub report, the sub report in question runs without issue. But when I try and move the sub report that produces the error above any other sub report, the error still generates. Can this get any weirder.... FYI.. there is a total of ten sub reports on this report.Hi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Error: The request could not be submitted for background processing
I'm getting an intermittent error in our custom reporting application using Crystal Reports Server XI R2 w/ SP1:
Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt: The request could not be submitted for background processing.
I'm using the Report Application Server XI Release 2 .NET SDK. This is the code that produces the exception (The export type is pdf):
ByteArray ba = this.reportClientDocument.PrintOutputController.Export(ConvertExportReportTypeToCrystalReportExportType(),0);
The error is also logged by Business Objects in the crystalras log file:
ErrorLog 2007 12 3 12:24:56.531 6624 4872 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:685 ErrorMsg:" Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt:
The request could not be submitted for background processing." DetailedErrorMsg:""
This has been happening regularly about once a week, at which point the RAS fails and no more reports can be run until the CMS and RAS servers have been restarted.
Has anyone else had this problem, or have any ideas?
ThanksIt was not a bug (not in all cases anyhow), but it is one of those error message that might as well say; something went wrong. I wrote an article on the most likely cases for the error and the article can be downloaded from here;
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33
See if the above article will help you out. Please note that having the latest SP / FP is step one. The downloads page is here;
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
I have a legacy reporting system written in VB.net (2003). (SQL Server backend) (I have .Net 2005 on my PC). The reporting system opens and generates the Crystal Reports. In the past, the .rpt files could simply be updated and the users would see the new report. None of the original developers are at this company anymore.
Here is what is going on... I modified a report - saved it as a .rpt in CR XI. When we placed it in the proper directory - a vague error message is generated stating: "Error in File : c:\DOCUME1\ASPNET\LOCALS1\Temp\temp_e999999999999999.rpt; The request could not be submitted for background processing." (where 99999 = bunch of characters generated for storing the file.).
One strange thing is that this reporting system is running as a webservice on a webserver. So, why is it trying to store anything on the C drive?? In addition, when I search for the file - it does not exist.
So.... I decided to try the least offensive thing - open a report that HAD been working - save it in a previous version (CR 10) and move that rpt into the proper 'production' folder. Same error message/different temp file name.
I tried deleting crqe.dll from C:\WINDOWS\system32. I thought that might be a problem - but I still get the same error.
I just don't know what to try next. Any advice would really be appreciated.The file that you are talking about is a temporary file that is generated while populating the report at clients side. This Temp file is used by Crystal to temporarily store data in it until the full report is ready to be displayed.
I am little confused as I am not sure if you are using VS2005 or VS2003 as VS2005 is not compatible with CR10. Is there any change made in the app or in server ?
AG. -
The requtest could not be submitted for backgroung processing.
Our Web applciation is using ASP.Net Framework 2.0 and Crysal Report Assembly version is 10.2.3600.0
After fetching one particular report we are getting below error
"Error in file c:\windows\temp\FileName{1B044BEA-1C14-44DF-92DC-107455F949FD}.RPT
The requtest could not be submitted for backgroung processing."
There is no problem while fetching data from backend procedure. It runs without error.
Is there any hot fix for the same?We too are facing same challange with CrystalReports Version=10.2.3600.0
Can some body post resolution.
Thanks in advance.
-Murali -
It says "can not install the driver: could not find media for this driver"
I am havin problem with sound in my Compaq presario V6406TU. When i try to install, it says "can not install the driver: could not find media for this driver", how ever i get a beep for every error message. In my device manager there is no UAA and in services.msc windows audio is started.
I have tried almost everything on net but not able to solve this, plz help.vendor wrote:
= No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
I think there is not.
Yes My Sound Card is exaclty SB0220. I have downloaded the patch and start it. After that I configured the installer and now I have creative drivers. But are they the best for my sound card? After all I`ve pathed the installer and some sort lied it. If the drivers are for my model, why should I path it's
Yes, I've seen a true SB0220 too on a picture after writing that comment so there is true SB0220 model. But, are you sure your card is SB0220? Did you look the number from a sticker on card board w/ serial number lik MSB022xxxxxxxxxxx where the SB022x is the true model number for your card.
Why you didn't got drivers installed for your card is, because the installer doesn't support the model SB0220 (supported cards are listed in ctcomp.dat -> this is the file ctcomp.exe patches).
IIrc, those drivers are the latest ones for your card. If you like to, you can try soft-mod your card the way, you can use Audigy series drivers (which are a bit newer) -> http://www.tech-pc.co.uk/audigy-2.php (i.e. you just use ctcomp.exe utility to patch the installer for Audigy drivers (use these drivers st - http://www.station-drivers.com/telechargement/creative/%20audigy%205.2.0.042.exe) (newer installer maybe can't be patched w/ ctcomp).
jutapa -
"The movie could not be sent to QT, because a file couldn't be found"
When I try to export a 2 1/2 min. iMovie video I made today in pretty much any format, I get the following:
"The movie could not be sent to QuickTime, because a file couldn't be found.
Please make sure that your project disk has write permission, and that you ahve enough disk space. This error can also be caused by some third-party iMovie HD plugins" then tells me what to do if I have said plug-ins. I have no plugins for iMovie.
The flash drive I'm attempting to save to has almost 80mb of available space. Also, something /does/ get saved on my drive, but the (Windows) computer I try to transfer it to won't recognize it and my MacBook's QuickTime refuses to play it.
What is going on?Welcome to iMovie Discussions.
iMovie - and other Mac programs - prefer (..or need!..) to have any discs, or other devices on which you're saving movie files, to be formatted as 'Mac OS Extended'.
That's different from the (generally) FAT32 format which Windows PCs use. And although Macs can read Windows-formatted discs - so your MacBook can read what's on your Windows-formatted flash disc - Windows machines generally cannot read Mac-formatted discs, so, er, you'd have a problem or two if you want to use any Mac-formatted device with a Windows machine!
Your flash drive - and anything else on which you've saved your 2.5 minute iMovie video - would need to be formatted as 'Mac OS Extended' if you want to use it for iMovie editing ..but you should be able to store a 'self-contained' QuickTime movie on it perfectly well in its PC-formatted state, and that movie should play in Windows when you plug it into a Windows machine if you have the latest Windows version of QuickTime on the Windows PC.
So maybe you exported your iMovie to QuickTime, onto the flash disc, but not as a self-contained movie. If it IS self-contained, then the complete movie would be there, and it's pretty much guaranteed to play. But if you didn't tick the 'self-contained' check-box, then all that gets saved is a very small file (called a "reference file") with a set of "pointers" to what's in the original iMovie project. In other words, you've saved only the details of how to play the movie, without actually saving the actual video file(s), which remain on your MacBook, instead of being on the flash disc. -
Hello i'm facing problem i downloaded itunes version 11 32bit for windows 7 and after i installing the set up when i opened the iTunes a massages occur saying i tunes could not connect to iTunes store an unknown error occurred (-3212) even though my internet is on
Try this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2 -
When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later
Can anyone help solve this problem?I've done a search on here and haven't found any solutions posted for it for windows computers. You could try posting in the iTunes For Windows forum and see if you get any suggestions in there (are you able to download other items from the store e.g. a free app ?) - I use a Mac, the only things that I could think of to suggest trying is see if you get the same error on a different iTunes library :
creating and/or opening a different iTunes library : http://support.apple.com/kb/HT1589
or using a different user account on your computer in case it's a problem with that user account.
But you may want to try the iTunes For Windows forum first, apart from anything else you are likely to get better help for the above -
?? "The movie could not be sent to Quicktime because a file couldn't be..."
trying to export a movie in iMovie HD - and that's what it says:
"The movie could not be sent to Quicktime because a file couldn't be found" then it says to rename the folder called "iMovie" in the library to "iMovie0", restart and press on.
then .... "Visit http://support.apple.com/ for more information on this issue."
ok. where on support?
anyone have any ideas on this? I have installed iLife08 - is this the issue?
tia.Thanks for the reply. I hadn't thought about that - but it IS an external and it is not OSX extended. I exported to my internal drive and all worked well. wonderful! problem solved - I'd never noticed that before, and I was sure I'd exported to that drive before. so, I tried again - presto it worked - I exported it to the external. so... the error message that came the first time went away.
.... strange
but ... solved?
thanks again,
f -
Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?
try this...
This is how I managed to fix the problem...and I hope this helps others in the similar situation.
I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
I hope this will help others who are having problems to burn stuff on iTunes.
Maybe you are looking for
-
How to give grants on runtime objects
Hi, I have created read only apps user,but i want to have a trigger/procedure which should give grant at runtime when the object i.e synnonym/view created in apps user. I have tried the anil passi read only apps user-trigger but it is throwing errors
-
I have created the user.js file and placed it under the default profile but cant get the cut, copy and paste to function in Joomla. I have copy and paste the script into the user.js file. I have also changed the url in that script to point to http://
-
4 extensions will not load xmarks, flagfox, 2 others, always get error messdagwe
Error: [Exception... "Component returned failure code: 0x80520012 (NS_ERROR_FILE_NOT_FOUND) [nsIFile.copyTo]" nsresult: "0x80520012 (NS_ERROR_FILE_NOT_FOUND)" location: "JS frame :: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionM
-
Hello, I have tried multiple attempts at writing rules that absolutely block international spam. Seems most of it is in French. I've set rules to delete mail with certain characters, etc. Nothing seems to work. I just want the Mail application to del
-
I purchased Photoshop Elements from Costco the other day and cannot get past the registration of serial number since it says that the number is incorrect. So, what can I do now?