Unable to prepare to publish (-49). How can i fix it ?, Unable to prepare to publish (-49). How can i fix it ?

Hi
My notes on this.
Error -49
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

Similar Messages

Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list) How do I fix this???

Unable to prepare project for publishing
The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I fix this???
I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.

I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space?

How can i fix this problem?? "The project could not be prepared for publishing because an error occurred. (Not enough room in heap zone / )"

The project could not be prepared for publishing because an error occurred. (Not enough room in heap zone / )
how can i fix this problem?

how can i fix this problem?
Go to the right forum.
This forum is for mobile iMovie.
you may need the iMovie Mac forum:
https://discussions.apple.com/community/ilife/imovie

When trying to Export Movie, I get an error saying Unable to prepare project for publishing. Can anyone help?

I have been trying to Export a 48 minute movie (stills, titles, transitions, and background music using iMovie 11 Ver 9. After a couple of hours of rendering, it stops with th efollowing error: "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (File already open with with write permission)". Can anyone help? Thanks.

I'd start with the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book. Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can hav

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book.
Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can have it offered for sale @$0.99, in your app store?
FROM: Terry Weber, Email: [email protected]

https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/bookSignup

Unable to prepare project for publishing (error -2125); how do I fix this?

Trying to export movie (about 200+ gb: 3hr.s+, using external hard drive) to a thumb drive (32 gb); I get the msg. unable to prepare project for publishing. An error occurred. (-2125)
What to do?

The thumb drive is probably formatted as FAT32 (most USB flash drives are formatted as FAT32). There is a 4GB file size limit with any drives formatted as FAT32. Try reformatting the thumb drive as Mac OS Extended (Journaled) using the Mac app Disk Utility (it comes with the OS and should be in the Utilities folder).
Also, are you sure that the 32GB drive is enough space for your exported movie? Try exporting it to your internal drive, or an external portable drive formatted as Mac OS Extended (Journaled). Then copy it to the thumb drive, provided that the exported file will fit on it.
Otherwise, you will need to follow Karsten's advice to duplicate the project one or more times, then delete portions from each duplicate so that you end up with a number of separate projects, each with their individual content. Then export each project separately.
To duplicate a project, while in Project Library view (where all your projects are listed), select File > Duplicate Project. Alternatively, right-click (or Control-click) on the project in the Library and select Duplicate Project from the pop-up menu.
If you need assistance with reformatting the thumb drive, please ask.
John

I am unable to to publish to BC i keep getting a type error: Don't know how to generate rendered data for type. Can someone help me fix this?

Been having this problem all day now. i just installed the new version

Can you please send an email to us at [email protected] along with a link to this thread and the .muse file? You can upload it to Adobe Send or Dropbox and include a download link. Thanks!

It says,The project could not be prepared for publishing because an error occurred. (Error in user parameter list)" What do i do so i can publish it?

it says,The project could not be prepared for publishing because an error occurred. (Error in user parameter list)" What do i do so i can publish it?

I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space?

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Will not share Imovie with Idvd. Gets so far and then a box saying Unable to prepare project for publishing because an error occured (-41)

Cannot SHARE project from IMovie to Idvd. Gets so far and then a box with a message saying Unable to prepare project for publishing because an error occured (-41).

Bengt is as always entirely correct, but another meaning of error -41 is that you have chosen the wrong encoding setting for the length of video you have:
iDVD encoding settings:
http://support.apple.com/kb/HT1502?viewlocale=en_US
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t. The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

I am trying to render a movie in ilife 11. Error appears: Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (project is too large). It is only 1:39:00. Any ideas? Thanks! Marv

this error occurs. Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (Project is too Long)
I know this isn't true, as it is only 1:39:31. I have a mac with 160mb and 160 gb available. Could this be the problem? If so how can I remove some things to make room? Thanks!!

By exporting to the right format a movie of an hour and forty minutes could potentially use up 160 GB, exactly what format are you exporting to. additionally I'm not clear what you mean when you say your mac has 160 MB and 160 GB available.

Imovie,unable to prepare project for publishing error -50

Hi,
I'm done editting my video and i have tried all sort to export it( share- media browser, facebook, export, etc) but it keeps on giving this " unable to prepare for publishing - the project could not be prepared for publishing because an error occurred (-50)".
Help me please.
Thank You.

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Error on imovie11: Unable to prepare project for publishing.

Error on imovie11: Unable to prepare project for publishing.
I badly need someone that is an extreme expert on Mac Pro and imovie11 and very good at troubleshooting. I have a critical project to get out and have serious problem. Mac store solutions did not work. Need a Pro that I can hire to come to my office in Raleigh NC.
Cleared the memory space on the drive, cleared the preferences.. critical problem. Love to find someone good to hire in the Raleigh NC area that come over and work on it.
Martin Brossman 919 847 4757
Apple Store advice did not work.

Rocker-65 is correct, large, long and complex projects can have problems resulting in a Error-108. Sometimes cutting a Project up into pieces or just cutting into 2 can help. Easiest way to accomplish the cutting is to create a Duplicate Project. Then just cut Project 1 in half, saving the first part. Duplicate Project gets cut in half and contains the second part.
Then if you want to stitch them back together, export each project individually at 720p. Import each one BACK into a new Event Folder in iMovie and combine then in a new Project, export that.

How can i print data in bi publisher template across wise

Hi,
Please let me know how can i print data in bi publisher template across wise.
eg.
In my C1 field there is a data coming like
S
JR
MR
i want to print this filed
S JR MR
Thanx
Arjun

Hi ,
Now i am able to print S JR MR horizontally.Thanx a lot for that.Now my problem is
There is one column field which displaying value like S JR MR
Now i am calculating a value using a function and want to display that value for each vale of above column
For eg
The report should display like this
C1 C2 C3
45 1-2-3 S JR MR
45*1 2*45 3*45
I have created package to make the string 1-2-3 separeate and the fuction is working fine .But unable to print value in bi
Its displaying like this for each S JR MR
45*1 2*45 3*45 45*1 2*45 3*45 45*1 2*45 3*45
45*1 is in different group that should display also horizontally thats why i tried this <?for-each@cell:G_STR_ID?>
Please help me
Thanks in advance

How can I create a right-to-left .pdf in MS Publisher with Acrobat Pro 9?

Hello.
We have a specialized application, and I was unable to find an answer by searching.
We need to create a right-to-left diglot (multi-language) Bible translation in MS Publisher. It will have Hebrew and/or Aramaic on the right hand side, and English (and/or other languages) on the left. We need MS Publisher to get the layout we want (as well as for source document compatibility).
When the document is done I need to create a single .pdf of the document, 8.5 x 11" (standard US_ paper), for the printer. How can I do that?
I will be using Acrobat Pro 9.
Thank you very much,
Norman.

Sorry, I forgot to specify that the page order needs to go from right to left (backwards from standard English documents).

Unable to prepare to publish (-49). How can i fix it ?, Unable to prepare to publish (-49). How can i fix it ?

Similar Messages

Maybe you are looking for